592 lines
13 KiB
C
592 lines
13 KiB
C
/*
|
|
* linux/arch/arm/mach-pxa/imote2.c
|
|
*
|
|
* Author: Ed C. Epp
|
|
* Created: Nov 05, 2002
|
|
* Copyright: Intel Corp.
|
|
*
|
|
* Modified 2008: Jonathan Cameron
|
|
*
|
|
* The Imote2 is a wireless sensor node platform sold
|
|
* by Crossbow (www.xbow.com).
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/device.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/mfd/da903x.h>
|
|
#include <linux/sht15.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
#include <asm/mach/flash.h>
|
|
|
|
#include <mach/pxa27x.h>
|
|
#include <plat/i2c.h>
|
|
#include <mach/udc.h>
|
|
#include <mach/mmc.h>
|
|
#include <mach/pxa2xx_spi.h>
|
|
#include <mach/pxa27x-udc.h>
|
|
|
|
#include "devices.h"
|
|
#include "generic.h"
|
|
|
|
static unsigned long imote2_pin_config[] __initdata = {
|
|
|
|
/* Device Identification for wakeup*/
|
|
GPIO102_GPIO,
|
|
|
|
/* Button */
|
|
GPIO91_GPIO,
|
|
|
|
/* DA9030 */
|
|
GPIO1_GPIO,
|
|
|
|
/* MMC */
|
|
GPIO32_MMC_CLK,
|
|
GPIO112_MMC_CMD,
|
|
GPIO92_MMC_DAT_0,
|
|
GPIO109_MMC_DAT_1,
|
|
GPIO110_MMC_DAT_2,
|
|
GPIO111_MMC_DAT_3,
|
|
|
|
/* 802.15.4 radio - driver out of mainline */
|
|
GPIO22_GPIO, /* CC_RSTN */
|
|
GPIO114_GPIO, /* CC_FIFO */
|
|
GPIO116_GPIO, /* CC_CCA */
|
|
GPIO0_GPIO, /* CC_FIFOP */
|
|
GPIO16_GPIO, /* CCSFD */
|
|
GPIO39_GPIO, /* CSn */
|
|
GPIO115_GPIO, /* Power enable */
|
|
|
|
/* I2C */
|
|
GPIO117_I2C_SCL,
|
|
GPIO118_I2C_SDA,
|
|
|
|
/* SSP 3 - 802.15.4 radio */
|
|
GPIO39_GPIO, /* Chip Select */
|
|
GPIO34_SSP3_SCLK,
|
|
GPIO35_SSP3_TXD,
|
|
GPIO41_SSP3_RXD,
|
|
|
|
/* SSP 2 - to daughter boards */
|
|
GPIO37_GPIO, /* Chip Select */
|
|
GPIO36_SSP2_SCLK,
|
|
GPIO38_SSP2_TXD,
|
|
GPIO11_SSP2_RXD,
|
|
|
|
/* SSP 1 - to daughter boards */
|
|
GPIO24_GPIO, /* Chip Select */
|
|
GPIO23_SSP1_SCLK,
|
|
GPIO25_SSP1_TXD,
|
|
GPIO26_SSP1_RXD,
|
|
|
|
/* BTUART Basic Connector*/
|
|
GPIO42_BTUART_RXD,
|
|
GPIO43_BTUART_TXD,
|
|
GPIO44_BTUART_CTS,
|
|
GPIO45_BTUART_RTS,
|
|
|
|
/* STUART Serial console via debug board*/
|
|
GPIO46_STUART_RXD,
|
|
GPIO47_STUART_TXD,
|
|
|
|
/* Basic sensor board */
|
|
GPIO96_GPIO, /* accelerometer interrupt */
|
|
GPIO99_GPIO, /* ADC interrupt */
|
|
|
|
/* SHT15 */
|
|
GPIO100_GPIO,
|
|
GPIO98_GPIO,
|
|
|
|
/* Connector pins specified as gpios */
|
|
GPIO94_GPIO, /* large basic connector pin 14 */
|
|
GPIO10_GPIO, /* large basic connector pin 23 */
|
|
|
|
/* LEDS */
|
|
GPIO103_GPIO, /* red led */
|
|
GPIO104_GPIO, /* green led */
|
|
GPIO105_GPIO, /* blue led */
|
|
};
|
|
|
|
static struct sht15_platform_data platform_data_sht15 = {
|
|
.gpio_data = 100,
|
|
.gpio_sck = 98,
|
|
};
|
|
|
|
static struct platform_device sht15 = {
|
|
.name = "sht15",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &platform_data_sht15,
|
|
},
|
|
};
|
|
|
|
static struct regulator_consumer_supply imote2_sensor_3_con[] = {
|
|
{
|
|
.dev = &sht15.dev,
|
|
.supply = "vcc",
|
|
},
|
|
};
|
|
|
|
static struct gpio_led imote2_led_pins[] = {
|
|
{
|
|
.name = "imote2:red",
|
|
.gpio = 103,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "imote2:green",
|
|
.gpio = 104,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "imote2:blue",
|
|
.gpio = 105,
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
static struct gpio_led_platform_data imote2_led_data = {
|
|
.num_leds = ARRAY_SIZE(imote2_led_pins),
|
|
.leds = imote2_led_pins,
|
|
};
|
|
|
|
static struct platform_device imote2_leds = {
|
|
.name = "leds-gpio",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &imote2_led_data,
|
|
},
|
|
};
|
|
|
|
/* Reverse engineered partly from Platformx drivers */
|
|
enum imote2_ldos{
|
|
vcc_vref,
|
|
vcc_cc2420,
|
|
vcc_mica,
|
|
vcc_bt,
|
|
/* The two voltages available to sensor boards */
|
|
vcc_sensor_1_8,
|
|
vcc_sensor_3,
|
|
|
|
vcc_sram_ext, /* directly connected to the pxa271 */
|
|
vcc_pxa_pll,
|
|
vcc_pxa_usim, /* Reference voltage for certain gpios */
|
|
vcc_pxa_mem,
|
|
vcc_pxa_flash,
|
|
vcc_pxa_core, /*Dc-Dc buck not yet supported */
|
|
vcc_lcd,
|
|
vcc_bb,
|
|
vcc_bbio,
|
|
vcc_io, /* cc2420 802.15.4 radio and pxa vcc_io ?*/
|
|
};
|
|
|
|
/* The values of the various regulator constraints are obviously dependent
|
|
* on exactly what is wired to each ldo. Unfortunately this information is
|
|
* not generally available. More information has been requested from Xbow
|
|
* but as of yet they haven't been forthcoming.
|
|
*
|
|
* Some of these are clearly Stargate 2 related (no way of plugging
|
|
* in an lcd on the IM2 for example!).
|
|
*/
|
|
static struct regulator_init_data imote2_ldo_init_data[] = {
|
|
[vcc_bbio] = {
|
|
.constraints = { /* board default 1.8V */
|
|
.name = "vcc_bbio",
|
|
.min_uV = 1800000,
|
|
.max_uV = 1800000,
|
|
},
|
|
},
|
|
[vcc_bb] = {
|
|
.constraints = { /* board default 2.8V */
|
|
.name = "vcc_bb",
|
|
.min_uV = 2700000,
|
|
.max_uV = 3000000,
|
|
},
|
|
},
|
|
[vcc_pxa_flash] = {
|
|
.constraints = {/* default is 1.8V */
|
|
.name = "vcc_pxa_flash",
|
|
.min_uV = 1800000,
|
|
.max_uV = 1800000,
|
|
},
|
|
},
|
|
[vcc_cc2420] = { /* also vcc_io */
|
|
.constraints = {
|
|
/* board default is 2.8V */
|
|
.name = "vcc_cc2420",
|
|
.min_uV = 2700000,
|
|
.max_uV = 3300000,
|
|
},
|
|
},
|
|
[vcc_vref] = { /* Reference for what? */
|
|
.constraints = { /* default 1.8V */
|
|
.name = "vcc_vref",
|
|
.min_uV = 1800000,
|
|
.max_uV = 1800000,
|
|
},
|
|
},
|
|
[vcc_sram_ext] = {
|
|
.constraints = { /* default 2.8V */
|
|
.name = "vcc_sram_ext",
|
|
.min_uV = 2800000,
|
|
.max_uV = 2800000,
|
|
},
|
|
},
|
|
[vcc_mica] = {
|
|
.constraints = { /* default 2.8V */
|
|
.name = "vcc_mica",
|
|
.min_uV = 2800000,
|
|
.max_uV = 2800000,
|
|
},
|
|
},
|
|
[vcc_bt] = {
|
|
.constraints = { /* default 2.8V */
|
|
.name = "vcc_bt",
|
|
.min_uV = 2800000,
|
|
.max_uV = 2800000,
|
|
},
|
|
},
|
|
[vcc_lcd] = {
|
|
.constraints = { /* default 2.8V */
|
|
.name = "vcc_lcd",
|
|
.min_uV = 2700000,
|
|
.max_uV = 3300000,
|
|
},
|
|
},
|
|
[vcc_io] = { /* Same or higher than everything
|
|
* bar vccbat and vccusb */
|
|
.constraints = { /* default 2.8V */
|
|
.name = "vcc_io",
|
|
.min_uV = 2692000,
|
|
.max_uV = 3300000,
|
|
},
|
|
},
|
|
[vcc_sensor_1_8] = {
|
|
.constraints = { /* default 1.8V */
|
|
.name = "vcc_sensor_1_8",
|
|
.min_uV = 1800000,
|
|
.max_uV = 1800000,
|
|
},
|
|
},
|
|
[vcc_sensor_3] = { /* curiously default 2.8V */
|
|
.constraints = {
|
|
.name = "vcc_sensor_3",
|
|
.min_uV = 2800000,
|
|
.max_uV = 3000000,
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(imote2_sensor_3_con),
|
|
.consumer_supplies = imote2_sensor_3_con,
|
|
},
|
|
[vcc_pxa_pll] = { /* 1.17V - 1.43V, default 1.3V*/
|
|
.constraints = {
|
|
.name = "vcc_pxa_pll",
|
|
.min_uV = 1170000,
|
|
.max_uV = 1430000,
|
|
},
|
|
},
|
|
[vcc_pxa_usim] = {
|
|
.constraints = { /* default 1.8V */
|
|
.name = "vcc_pxa_usim",
|
|
.min_uV = 1710000,
|
|
.max_uV = 2160000,
|
|
},
|
|
},
|
|
[vcc_pxa_mem] = {
|
|
.constraints = { /* default 1.8V */
|
|
.name = "vcc_pxa_mem",
|
|
.min_uV = 1800000,
|
|
.max_uV = 1800000,
|
|
},
|
|
},
|
|
};
|
|
|
|
static struct da903x_subdev_info imote2_da9030_subdevs[] = {
|
|
{
|
|
.name = "da903x-regulator",
|
|
.id = DA9030_ID_LDO2,
|
|
.platform_data = &imote2_ldo_init_data[vcc_bbio],
|
|
}, {
|
|
.name = "da903x-regulator",
|
|
.id = DA9030_ID_LDO3,
|
|
.platform_data = &imote2_ldo_init_data[vcc_bb],
|
|
}, {
|
|
.name = "da903x-regulator",
|
|
.id = DA9030_ID_LDO4,
|
|
.platform_data = &imote2_ldo_init_data[vcc_pxa_flash],
|
|
}, {
|
|
.name = "da903x-regulator",
|
|
.id = DA9030_ID_LDO5,
|
|
.platform_data = &imote2_ldo_init_data[vcc_cc2420],
|
|
}, {
|
|
.name = "da903x-regulator",
|
|
.id = DA9030_ID_LDO6,
|
|
.platform_data = &imote2_ldo_init_data[vcc_vref],
|
|
}, {
|
|
.name = "da903x-regulator",
|
|
.id = DA9030_ID_LDO7,
|
|
.platform_data = &imote2_ldo_init_data[vcc_sram_ext],
|
|
}, {
|
|
.name = "da903x-regulator",
|
|
.id = DA9030_ID_LDO8,
|
|
.platform_data = &imote2_ldo_init_data[vcc_mica],
|
|
}, {
|
|
.name = "da903x-regulator",
|
|
.id = DA9030_ID_LDO9,
|
|
.platform_data = &imote2_ldo_init_data[vcc_bt],
|
|
}, {
|
|
.name = "da903x-regulator",
|
|
.id = DA9030_ID_LDO10,
|
|
.platform_data = &imote2_ldo_init_data[vcc_sensor_1_8],
|
|
}, {
|
|
.name = "da903x-regulator",
|
|
.id = DA9030_ID_LDO11,
|
|
.platform_data = &imote2_ldo_init_data[vcc_sensor_3],
|
|
}, {
|
|
.name = "da903x-regulator",
|
|
.id = DA9030_ID_LDO12,
|
|
.platform_data = &imote2_ldo_init_data[vcc_lcd],
|
|
}, {
|
|
.name = "da903x-regulator",
|
|
.id = DA9030_ID_LDO15,
|
|
.platform_data = &imote2_ldo_init_data[vcc_pxa_pll],
|
|
}, {
|
|
.name = "da903x-regulator",
|
|
.id = DA9030_ID_LDO17,
|
|
.platform_data = &imote2_ldo_init_data[vcc_pxa_usim],
|
|
}, {
|
|
.name = "da903x-regulator",
|
|
.id = DA9030_ID_LDO18,
|
|
.platform_data = &imote2_ldo_init_data[vcc_io],
|
|
}, {
|
|
.name = "da903x-regulator",
|
|
.id = DA9030_ID_LDO19,
|
|
.platform_data = &imote2_ldo_init_data[vcc_pxa_mem],
|
|
},
|
|
};
|
|
|
|
static struct da903x_platform_data imote2_da9030_pdata = {
|
|
.num_subdevs = ARRAY_SIZE(imote2_da9030_subdevs),
|
|
.subdevs = imote2_da9030_subdevs,
|
|
};
|
|
|
|
/* As the the imote2 doesn't currently have a conventional SD slot
|
|
* there is no option to hotplug cards, making all this rather simple
|
|
*/
|
|
static int imote2_mci_get_ro(struct device *dev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
/* Rather simple case as hotplugging not possible */
|
|
static struct pxamci_platform_data imote2_mci_platform_data = {
|
|
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* default anyway */
|
|
.get_ro = imote2_mci_get_ro,
|
|
.gpio_card_detect = -1,
|
|
.gpio_card_ro = -1,
|
|
.gpio_power = -1,
|
|
};
|
|
|
|
static struct mtd_partition imote2flash_partitions[] = {
|
|
{
|
|
.name = "Bootloader",
|
|
.size = 0x00040000,
|
|
.offset = 0,
|
|
.mask_flags = MTD_WRITEABLE,
|
|
}, {
|
|
.name = "Kernel",
|
|
.size = 0x00200000,
|
|
.offset = 0x00040000,
|
|
.mask_flags = 0,
|
|
}, {
|
|
.name = "Filesystem",
|
|
.size = 0x01DC0000,
|
|
.offset = 0x00240000,
|
|
.mask_flags = 0,
|
|
},
|
|
};
|
|
|
|
static struct resource flash_resources = {
|
|
.start = PXA_CS0_PHYS,
|
|
.end = PXA_CS0_PHYS + SZ_32M - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
};
|
|
|
|
static struct flash_platform_data imote2_flash_data = {
|
|
.map_name = "cfi_probe",
|
|
.parts = imote2flash_partitions,
|
|
.nr_parts = ARRAY_SIZE(imote2flash_partitions),
|
|
.name = "PXA27xOnChipROM",
|
|
.width = 2,
|
|
};
|
|
|
|
static struct platform_device imote2_flash_device = {
|
|
.name = "pxa2xx-flash",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &imote2_flash_data,
|
|
},
|
|
.resource = &flash_resources,
|
|
.num_resources = 1,
|
|
};
|
|
|
|
/* Some of the drivers here are out of kernel at the moment (parts of IIO)
|
|
* and it may be a while before they are in the mainline.
|
|
*/
|
|
static struct i2c_board_info __initdata imote2_i2c_board_info[] = {
|
|
{ /* UCAM sensor board */
|
|
.type = "max1239",
|
|
.addr = 0x35,
|
|
}, { /* ITS400 Sensor board only */
|
|
.type = "max1363",
|
|
.addr = 0x34,
|
|
/* Through a nand gate - Also beware, on V2 sensor board the
|
|
* pull up resistors are missing.
|
|
*/
|
|
.irq = IRQ_GPIO(99),
|
|
}, { /* ITS400 Sensor board only */
|
|
.type = "tsl2561",
|
|
.addr = 0x49,
|
|
/* Through a nand gate - Also beware, on V2 sensor board the
|
|
* pull up resistors are missing.
|
|
*/
|
|
.irq = IRQ_GPIO(99),
|
|
}, { /* ITS400 Sensor board only */
|
|
.type = "tmp175",
|
|
.addr = 0x4A,
|
|
.irq = IRQ_GPIO(96),
|
|
}, { /* IMB400 Multimedia board */
|
|
.type = "wm8940",
|
|
.addr = 0x1A,
|
|
},
|
|
};
|
|
|
|
static struct i2c_board_info __initdata imote2_pwr_i2c_board_info[] = {
|
|
{
|
|
.type = "da9030",
|
|
.addr = 0x49,
|
|
.platform_data = &imote2_da9030_pdata,
|
|
.irq = gpio_to_irq(1),
|
|
},
|
|
};
|
|
|
|
static struct pxa2xx_spi_master pxa_ssp_master_0_info = {
|
|
.num_chipselect = 1,
|
|
};
|
|
|
|
static struct pxa2xx_spi_master pxa_ssp_master_1_info = {
|
|
.num_chipselect = 1,
|
|
};
|
|
|
|
static struct pxa2xx_spi_master pxa_ssp_master_2_info = {
|
|
.num_chipselect = 1,
|
|
};
|
|
|
|
static struct pxa2xx_spi_chip staccel_chip_info = {
|
|
.tx_threshold = 8,
|
|
.rx_threshold = 8,
|
|
.dma_burst_size = 8,
|
|
.timeout = 235,
|
|
.gpio_cs = 24,
|
|
};
|
|
|
|
static struct pxa2xx_spi_chip cc2420_info = {
|
|
.tx_threshold = 8,
|
|
.rx_threshold = 8,
|
|
.dma_burst_size = 8,
|
|
.timeout = 235,
|
|
.gpio_cs = 39,
|
|
};
|
|
|
|
static struct spi_board_info spi_board_info[] __initdata = {
|
|
{ /* Driver in IIO */
|
|
.modalias = "lis3l02dq",
|
|
.max_speed_hz = 8000000,/* 8MHz max spi frequency at 3V */
|
|
.bus_num = 1,
|
|
.chip_select = 0,
|
|
.controller_data = &staccel_chip_info,
|
|
.irq = IRQ_GPIO(96),
|
|
}, { /* Driver out of kernel as it needs considerable rewriting */
|
|
.modalias = "cc2420",
|
|
.max_speed_hz = 6500000,
|
|
.bus_num = 3,
|
|
.chip_select = 0,
|
|
.controller_data = &cc2420_info,
|
|
},
|
|
};
|
|
|
|
static void im2_udc_command(int cmd)
|
|
{
|
|
switch (cmd) {
|
|
case PXA2XX_UDC_CMD_CONNECT:
|
|
UP2OCR |= UP2OCR_HXOE | UP2OCR_DPPUE | UP2OCR_DPPUBE;
|
|
break;
|
|
case PXA2XX_UDC_CMD_DISCONNECT:
|
|
UP2OCR &= ~(UP2OCR_HXOE | UP2OCR_DPPUE | UP2OCR_DPPUBE);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static struct pxa2xx_udc_mach_info imote2_udc_info __initdata = {
|
|
.udc_command = im2_udc_command,
|
|
};
|
|
|
|
static struct platform_device *imote2_devices[] = {
|
|
&imote2_flash_device,
|
|
&imote2_leds,
|
|
&sht15,
|
|
};
|
|
|
|
static struct i2c_pxa_platform_data i2c_pwr_pdata = {
|
|
.fast_mode = 1,
|
|
};
|
|
|
|
static struct i2c_pxa_platform_data i2c_pdata = {
|
|
.fast_mode = 1,
|
|
};
|
|
|
|
static void __init imote2_init(void)
|
|
{
|
|
|
|
pxa2xx_mfp_config(ARRAY_AND_SIZE(imote2_pin_config));
|
|
/* SPI chip select directions - all other directions should
|
|
* be handled by drivers.*/
|
|
gpio_direction_output(37, 0);
|
|
|
|
platform_add_devices(imote2_devices, ARRAY_SIZE(imote2_devices));
|
|
|
|
pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info);
|
|
pxa2xx_set_spi_info(2, &pxa_ssp_master_1_info);
|
|
pxa2xx_set_spi_info(3, &pxa_ssp_master_2_info);
|
|
|
|
spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
|
|
|
|
i2c_register_board_info(0, imote2_i2c_board_info,
|
|
ARRAY_SIZE(imote2_i2c_board_info));
|
|
i2c_register_board_info(1, imote2_pwr_i2c_board_info,
|
|
ARRAY_SIZE(imote2_pwr_i2c_board_info));
|
|
|
|
pxa27x_set_i2c_power_info(&i2c_pwr_pdata);
|
|
pxa_set_i2c_info(&i2c_pdata);
|
|
|
|
pxa_set_mci_info(&imote2_mci_platform_data);
|
|
pxa_set_udc_info(&imote2_udc_info);
|
|
}
|
|
|
|
MACHINE_START(INTELMOTE2, "IMOTE 2")
|
|
.phys_io = 0x40000000,
|
|
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
|
|
.map_io = pxa_map_io,
|
|
.init_irq = pxa27x_init_irq,
|
|
.timer = &pxa_timer,
|
|
.init_machine = imote2_init,
|
|
.boot_params = 0xA0000100,
|
|
MACHINE_END
|