satip-axe/kernel/arch/mips/alchemy/devboards/db1x00/board_setup.c
2015-03-26 17:24:57 +01:00

146 lines
4.0 KiB
C

/*
*
* BRIEF MODULE DESCRIPTION
* Alchemy Db1x00 board setup.
*
* Copyright 2000, 2008 MontaVista Software Inc.
* Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/gpio.h>
#include <linux/init.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-db1x00/db1x00.h>
#include <prom.h>
static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
const char *get_system_type(void)
{
#ifdef CONFIG_MIPS_BOSPORUS
return "Alchemy Bosporus Gateway Reference";
#else
return "Alchemy Db1x00";
#endif
}
void board_reset(void)
{
/* Hit BCSR.SW_RESET[RESET] */
bcsr->swreset = 0x0000;
}
void __init board_setup(void)
{
u32 pin_func = 0;
char *argptr;
argptr = prom_getcmdline();
#ifdef CONFIG_SERIAL_8250_CONSOLE
argptr = strstr(argptr, "console=");
if (argptr == NULL) {
argptr = prom_getcmdline();
strcat(argptr, " console=ttyS0,115200");
}
#endif
#ifdef CONFIG_FB_AU1100
argptr = strstr(argptr, "video=");
if (argptr == NULL) {
argptr = prom_getcmdline();
/* default panel */
/*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/
}
#endif
#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000)
/* au1000 does not support vra, au1500 and au1100 do */
strcat(argptr, " au1000_audio=vra");
argptr = prom_getcmdline();
#endif
/* Not valid for Au1550 */
#if defined(CONFIG_IRDA) && \
(defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100))
/* Set IRFIRSEL instead of GPIO15 */
pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF;
au_writel(pin_func, SYS_PINFUNC);
/* Power off until the driver is in use */
bcsr->resets &= ~BCSR_RESETS_IRDA_MODE_MASK;
bcsr->resets |= BCSR_RESETS_IRDA_MODE_OFF;
au_sync();
#endif
bcsr->pcmcia = 0x0000; /* turn off PCMCIA power */
/* Enable GPIO[31:0] inputs */
alchemy_gpio1_input_enable();
#ifdef CONFIG_MIPS_MIRAGE
/* GPIO[20] is output */
alchemy_gpio_direction_output(20, 0);
/* Set GPIO[210:208] instead of SSI_0 */
pin_func = au_readl(SYS_PINFUNC) | SYS_PF_S0;
/* Set GPIO[215:211] for LEDs */
pin_func |= 5 << 2;
/* Set GPIO[214:213] for more LEDs */
pin_func |= 5 << 12;
/* Set GPIO[207:200] instead of PCMCIA/LCD */
pin_func |= SYS_PF_LCD | SYS_PF_PC;
au_writel(pin_func, SYS_PINFUNC);
/*
* Enable speaker amplifier. This should
* be part of the audio driver.
*/
alchemy_gpio_direction_output(209, 1);
#endif
au_sync();
#ifdef CONFIG_MIPS_DB1000
printk(KERN_INFO "AMD Alchemy Au1000/Db1000 Board\n");
#endif
#ifdef CONFIG_MIPS_DB1500
printk(KERN_INFO "AMD Alchemy Au1500/Db1500 Board\n");
#endif
#ifdef CONFIG_MIPS_DB1100
printk(KERN_INFO "AMD Alchemy Au1100/Db1100 Board\n");
#endif
#ifdef CONFIG_MIPS_BOSPORUS
printk(KERN_INFO "AMD Alchemy Bosporus Board\n");
#endif
#ifdef CONFIG_MIPS_MIRAGE
printk(KERN_INFO "AMD Alchemy Mirage Board\n");
#endif
#ifdef CONFIG_MIPS_DB1550
printk(KERN_INFO "AMD Alchemy Au1550/Db1550 Board\n");
#endif
}