satip-axe/kernel/arch/sh/boards/mach-adi7108/setup.c
2015-03-26 17:24:57 +01:00

380 lines
9.6 KiB
C

/*
* arch/sh/boards/mach-adi7108/setup.c
*
* Copyright (C) 2011 STMicroelectronics Limited
* Author: Srinivas Kandagatla (srinivas.kandagatla@st.com)
*
* May be copied or modified under the terms of the GNU General Public
* License. See linux/COPYING for more information.
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/phy.h>
#include <linux/gpio.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
#include <linux/stm/nand.h>
#include <linux/stm/emi.h>
#include <linux/stm/platform.h>
#include <linux/stm/stx7108.h>
#include <linux/stm/sysconf.h>
#include <asm/irq-ilc.h>
#define ADI7108_PIO_POWER_ON_ETHERNET0 stm_gpio(19, 7)
#define ADI7108_PIO_POWER_ON_ETHERNET1 stm_gpio(15, 4)
#define ADI7108_GPIO_MII1_SPEED_SEL stm_gpio(21, 7)
static void __init adi7108_setup(char **cmdline_p)
{
printk(KERN_INFO "STMicroelectronics STi7108-ADI Board "
"initialisation\n");
stx7108_early_device_init();
stx7108_configure_asc(3, &(struct stx7108_asc_config) {
.routing.asc3.txd = stx7108_asc3_txd_pio24_4,
.routing.asc3.rxd = stx7108_asc3_rxd_pio24_5,
.hw_flow_control = 0,
.is_console = 1, });
stx7108_configure_asc(1, &(struct stx7108_asc_config) {
.hw_flow_control = 1, });
}
static int adi7108_phy1_reset(void *bus)
{
static int done;
if (!done) {
gpio_set_value(ADI7108_PIO_POWER_ON_ETHERNET1, 0);
udelay(10000); /* 10 miliseconds is enough for everyone ;-) */
gpio_set_value(ADI7108_PIO_POWER_ON_ETHERNET1, 1);
done = 1;
}
return 1;
}
static void adi7108_mii_txclk_select(int txclk_250_not_25_mhz)
{
/* When 1000 speed is negotiated we have to set the PIO21[7]. */
if (txclk_250_not_25_mhz)
gpio_set_value(ADI7108_GPIO_MII1_SPEED_SEL, 1);
else
gpio_set_value(ADI7108_GPIO_MII1_SPEED_SEL, 0);
}
#ifdef CONFIG_SH_ST_ADI7108_STMMAC0
static int adi7108_phy0_reset(void *bus)
{
static int done;
if (!done) {
gpio_set_value(ADI7108_PIO_POWER_ON_ETHERNET0, 0);
udelay(10000); /* 10 miliseconds is enough for everyone ;-) */
gpio_set_value(ADI7108_PIO_POWER_ON_ETHERNET0, 1);
done = 1;
}
return 1;
}
static struct stmmac_mdio_bus_data stmmac0_mdio_bus = {
.bus_id = 0,
.phy_reset = adi7108_phy0_reset,
.phy_mask = 0,
};
#endif /* CONFIG_SH_ST_ADI7108_STMMAC0 */
static struct stmmac_mdio_bus_data stmmac1_mdio_bus = {
.bus_id = 1,
.phy_reset = adi7108_phy1_reset,
.phy_mask = 0,
};
/* NOR FLASH */
static struct platform_device adi7108_nor_flash = {
.name = "physmap-flash",
.id = -1,
.num_resources = 1,
.resource = (struct resource[]) {
{
.start = 0x00000000,
.end = 256*1024*1024 - 1,
.flags = IORESOURCE_MEM,
}
},
.dev.platform_data = &(struct physmap_flash_data) {
.width = 2,
.set_vpp = NULL,
.nr_parts = 3,
.parts = (struct mtd_partition []) {
{
.name = "NOR Flash 1",
.size = 0x00080000,
.offset = 0x00000000,
}, {
.name = "NOR Flash 2",
.size = 0x00200000,
.offset = MTDPART_OFS_NXTBLK,
}, {
.name = "NOR Flash 3",
.size = MTDPART_SIZ_FULL,
.offset = MTDPART_OFS_NXTBLK,
}
},
},
};
/* Serial FLASH */
static struct stm_plat_spifsm_data adi7108_serial_flash = {
.name = "m25p128",
.nr_parts = 2,
.parts = (struct mtd_partition []) {
{
.name = "Serial Flash 1",
.size = 0x00200000,
.offset = 0,
}, {
.name = "Serial Flash 2",
.size = MTDPART_SIZ_FULL,
.offset = MTDPART_OFS_NXTBLK,
},
},
};
/* NAND FLASH */
static struct stm_nand_bank_data adi7108_nand_flash = {
.csn = 1,
.options = NAND_NO_AUTOINCR | NAND_USE_FLASH_BBT,
.nr_partitions = 2,
.partitions = (struct mtd_partition []) {
{
.name = "NAND Flash 1",
.offset = 0,
.size = 0x00800000
}, {
.name = "NAND Flash 2",
.offset = MTDPART_OFS_NXTBLK,
.size = MTDPART_SIZ_FULL
},
},
.timing_data = &(struct stm_nand_timing_data) {
.sig_setup = 10, /* times in ns */
.sig_hold = 10,
.CE_deassert = 0,
.WE_to_RBn = 100,
.wr_on = 10,
.wr_off = 30,
.rd_on = 10,
.rd_off = 30,
.chip_delay = 30, /* in us */
},
};
static struct platform_device *adi7108_devices[] __initdata = {
&adi7108_nor_flash,
};
static int __init device_init(void)
{
struct sysconf_field *sc;
unsigned long nor_bank_base = 0;
unsigned long nor_bank_size = 0;
/*
*
* BootUp RE32 & RE35 RE33 & RE34
* NOR 0R NC
* NAND/SPI NC 0R
*
*/
/* Configure Flash according to boot-device
*
* [Only tested on boot-from-NOR, board-mod required for
* boot-from-NAND/SPI]
*/
sc = sysconf_claim(SYS_STA_BANK1, 3, 2, 6, "boot_device");
switch (sysconf_read(sc)) {
case 0x15:
pr_info("Configuring FLASH for boot-from-NOR\n");
nor_bank_base = emi_bank_base(0);
nor_bank_size = emi_bank_base(1) - nor_bank_base;
adi7108_nand_flash.csn = 1;
break;
case 0x14:
pr_info("Configuring FLASH for boot-from-NAND\n");
nor_bank_base = emi_bank_base(1);
nor_bank_size = emi_bank_base(2) - nor_bank_base;
adi7108_nand_flash.csn = 0;
break;
case 0x1a:
pr_info("Configuring FLASH for boot-from-SPI\n");
nor_bank_base = emi_bank_base(1);
nor_bank_size = emi_bank_base(2) - nor_bank_base;
adi7108_nand_flash.csn = 0;
break;
default:
BUG();
break;
}
sysconf_release(sc);
/* Update NOR Flash base address and size: */
/* - limit bank size to 64MB (some targetpacks define 128MB!) */
if (nor_bank_size > 64*1024*1024)
nor_bank_size = 64*1024*1024;
/* - reduce visibility of NOR flash to EMI bank size */
if (adi7108_nor_flash.resource[0].end > nor_bank_size - 1)
adi7108_nor_flash.resource[0].end = nor_bank_size - 1;
/* - update resource parameters */
adi7108_nor_flash.resource[0].start += nor_bank_base;
adi7108_nor_flash.resource[0].end += nor_bank_base;
/* NIM */
stx7108_configure_ssc_i2c(1, NULL);
/* AV */
stx7108_configure_ssc_i2c(2, &(struct stx7108_ssc_config) {
.routing.ssc2.sclk = stx7108_ssc2_sclk_pio14_4,
.routing.ssc2.mtsr = stx7108_ssc2_mtsr_pio14_5, });
/* EEPROM */
stx7108_configure_ssc_i2c(5, NULL);
/* HDMI */
stx7108_configure_ssc_i2c(6, NULL);
stx7108_configure_lirc(&(struct stx7108_lirc_config) {
.rx_mode = stx7108_lirc_rx_mode_ir, });
stx7108_configure_usb(0);
stx7108_configure_usb(1);
stx7108_configure_usb(2);
/*-------------------------------------------------------------
* | Ver1.0 VerB VerC VerD
* SATA 0/1 connector | E-sata0+1 E-sata0 E-sata0 Sata on board
* PCI-e Connector | √ √
*-------------------------------------------------------------*/
#if defined(CONFIG_SH_ST_ADI7108_VER_B_BOARD) || \
defined(CONFIG_SH_ST_ADI7108_VER_C_BOARD)
stx7108_configure_miphy(&(struct stx7108_miphy_config) {
.modes = (enum miphy_mode[2]) {
SATA_MODE, PCIE_MODE },
});
stx7108_configure_sata(0, &(struct stx7108_sata_config) { });
#elif defined(CONFIG_SH_ST_ADI7108_VER_D_BOARD) || \
defined(CONFIG_SH_ST_ADI7108_VER_1_0_BOARD)
stx7108_configure_miphy(&(struct stx7108_miphy_config) {
.modes = (enum miphy_mode[2]) {
SATA_MODE, SATA_MODE },
});
stx7108_configure_sata(0, &(struct stx7108_sata_config) { });
stx7108_configure_sata(1, &(struct stx7108_sata_config) { });
#endif
#ifdef CONFIG_SH_ST_ADI7108_STMMAC0
/* By default the RJ45 connector is removed on this board. */
gpio_request(ADI7108_PIO_POWER_ON_ETHERNET0, "POWER_ON_ETHERNET");
gpio_direction_output(ADI7108_PIO_POWER_ON_ETHERNET0, 0);
stx7108_configure_ethernet(0, &(struct stx7108_ethernet_config) {
.mode = stx7108_ethernet_mode_mii,
.ext_clk = 1,
.phy_bus = 0,
.phy_addr = -1,
.mdio_bus_data = &stmmac0_mdio_bus,
});
#endif /* CONFIG_SH_ST_ADI7108_STMMAC0 */
/* To use the MII/GMII mode.
*
* RP1 MII1_EN
* GMII NC 1
* MII 51R 0
*
*/
/* The "POWER_ON_ETH" line should be rather called "PHY_RESET",
* but it isn't... ;-) */
gpio_request(ADI7108_PIO_POWER_ON_ETHERNET1, "POWER_ON_ETHERNET");
gpio_direction_output(ADI7108_PIO_POWER_ON_ETHERNET1, 0);
gpio_request(ADI7108_GPIO_MII1_SPEED_SEL, "stmmac");
gpio_direction_output(ADI7108_GPIO_MII1_SPEED_SEL, 0);
stx7108_configure_ethernet(1, &(struct stx7108_ethernet_config) {
.mode = stx7108_ethernet_mode_gmii_gtx,
.ext_clk = 0,
.phy_bus = 1,
.txclk_select = adi7108_mii_txclk_select,
.phy_addr = 1,
.mdio_bus_data = &stmmac1_mdio_bus,
});
stx7108_configure_nand(&(struct stm_nand_config) {
.driver = stm_nand_flex,
.nr_banks = 1,
.banks = &adi7108_nand_flash,
.rbn.flex_connected = 1,});
stx7108_configure_spifsm(&adi7108_serial_flash);
stx7108_configure_mmc(0);
return platform_add_devices(adi7108_devices,
ARRAY_SIZE(adi7108_devices));
}
arch_initcall(device_init);
static void __iomem *adi7108_ioport_map(unsigned long port, unsigned int size)
{
/* If we have PCI then this should never be called because we
* are using the generic iomap implementation. If we don't
* have PCI then there are no IO mapped devices, so it still
* shouldn't be called. */
BUG();
return NULL;
}
struct sh_machine_vector mv_adi7108 __initmv = {
.mv_name = "adi7108",
.mv_setup = adi7108_setup,
.mv_nr_irqs = NR_IRQS,
.mv_ioport_map = adi7108_ioport_map,
};
#ifdef CONFIG_HIBERNATION_ON_MEMORY
int stm_defrost_board(void *data)
{
gpio_direction_output(ADI7108_PIO_POWER_ON_ETHERNET1, 0);
gpio_direction_output(ADI7108_GPIO_MII1_SPEED_SEL, 0);
/*
* adi7108_phy_reset(...);
*/
gpio_set_value(ADI7108_PIO_POWER_ON_ETHERNET1, 0);
udelay(10000); /* 10 miliseconds is enough for everyone ;-) */
gpio_set_value(ADI7108_PIO_POWER_ON_ETHERNET1, 1);
return 0;
}
#endif