satip-axe/kernel/arch/ia64/lib/copy_page_mck.S
2015-03-26 17:24:57 +01:00

186 lines
5.7 KiB
ArmAsm

/*
* McKinley-optimized version of copy_page().
*
* Copyright (C) 2002 Hewlett-Packard Co
* David Mosberger <davidm@hpl.hp.com>
*
* Inputs:
* in0: address of target page
* in1: address of source page
* Output:
* no return value
*
* General idea:
* - use regular loads and stores to prefetch data to avoid consuming M-slot just for
* lfetches => good for in-cache performance
* - avoid l2 bank-conflicts by not storing into the same 16-byte bank within a single
* cycle
*
* Principle of operation:
* First, note that L1 has a line-size of 64 bytes and L2 a line-size of 128 bytes.
* To avoid secondary misses in L2, we prefetch both source and destination with a line-size
* of 128 bytes. When both of these lines are in the L2 and the first half of the
* source line is in L1, we start copying the remaining words. The second half of the
* source line is prefetched in an earlier iteration, so that by the time we start
* accessing it, it's also present in the L1.
*
* We use a software-pipelined loop to control the overall operation. The pipeline
* has 2*PREFETCH_DIST+K stages. The first PREFETCH_DIST stages are used for prefetching
* source cache-lines. The second PREFETCH_DIST stages are used for prefetching destination
* cache-lines, the last K stages are used to copy the cache-line words not copied by
* the prefetches. The four relevant points in the pipelined are called A, B, C, D:
* p[A] is TRUE if a source-line should be prefetched, p[B] is TRUE if a destination-line
* should be prefetched, p[C] is TRUE if the second half of an L2 line should be brought
* into L1D and p[D] is TRUE if a cacheline needs to be copied.
*
* This all sounds very complicated, but thanks to the modulo-scheduled loop support,
* the resulting code is very regular and quite easy to follow (once you get the idea).
*
* As a secondary optimization, the first 2*PREFETCH_DIST iterations are implemented
* as the separate .prefetch_loop. Logically, this loop performs exactly like the
* main-loop (.line_copy), but has all known-to-be-predicated-off instructions removed,
* so that each loop iteration is faster (again, good for cached case).
*
* When reading the code, it helps to keep the following picture in mind:
*
* word 0 word 1
* +------+------+---
* | v[x] | t1 | ^
* | t2 | t3 | |
* | t4 | t5 | |
* | t6 | t7 | | 128 bytes
* | n[y] | t9 | | (L2 cache line)
* | t10 | t11 | |
* | t12 | t13 | |
* | t14 | t15 | v
* +------+------+---
*
* Here, v[x] is copied by the (memory) prefetch. n[y] is loaded at p[C]
* to fetch the second-half of the L2 cache line into L1, and the tX words are copied in
* an order that avoids bank conflicts.
*/
#include <asm/asmmacro.h>
#include <asm/page.h>
#define PREFETCH_DIST 8 // McKinley sustains 16 outstanding L2 misses (8 ld, 8 st)
#define src0 r2
#define src1 r3
#define dst0 r9
#define dst1 r10
#define src_pre_mem r11
#define dst_pre_mem r14
#define src_pre_l2 r15
#define dst_pre_l2 r16
#define t1 r17
#define t2 r18
#define t3 r19
#define t4 r20
#define t5 t1 // alias!
#define t6 t2 // alias!
#define t7 t3 // alias!
#define t9 t5 // alias!
#define t10 t4 // alias!
#define t11 t7 // alias!
#define t12 t6 // alias!
#define t14 t10 // alias!
#define t13 r21
#define t15 r22
#define saved_lc r23
#define saved_pr r24
#define A 0
#define B (PREFETCH_DIST)
#define C (B + PREFETCH_DIST)
#define D (C + 3)
#define N (D + 1)
#define Nrot ((N + 7) & ~7)
GLOBAL_ENTRY(copy_page)
.prologue
alloc r8 = ar.pfs, 2, Nrot-2, 0, Nrot
.rotr v[2*PREFETCH_DIST], n[D-C+1]
.rotp p[N]
.save ar.lc, saved_lc
mov saved_lc = ar.lc
.save pr, saved_pr
mov saved_pr = pr
.body
mov src_pre_mem = in1
mov pr.rot = 0x10000
mov ar.ec = 1 // special unrolled loop
mov dst_pre_mem = in0
mov ar.lc = 2*PREFETCH_DIST - 1
add src_pre_l2 = 8*8, in1
add dst_pre_l2 = 8*8, in0
add src0 = 8, in1 // first t1 src
add src1 = 3*8, in1 // first t3 src
add dst0 = 8, in0 // first t1 dst
add dst1 = 3*8, in0 // first t3 dst
mov t1 = (PAGE_SIZE/128) - (2*PREFETCH_DIST) - 1
nop.m 0
nop.i 0
;;
// same as .line_copy loop, but with all predicated-off instructions removed:
.prefetch_loop:
(p[A]) ld8 v[A] = [src_pre_mem], 128 // M0
(p[B]) st8 [dst_pre_mem] = v[B], 128 // M2
br.ctop.sptk .prefetch_loop
;;
cmp.eq p16, p0 = r0, r0 // reset p16 to 1 (br.ctop cleared it to zero)
mov ar.lc = t1 // with 64KB pages, t1 is too big to fit in 8 bits!
mov ar.ec = N // # of stages in pipeline
;;
.line_copy:
(p[D]) ld8 t2 = [src0], 3*8 // M0
(p[D]) ld8 t4 = [src1], 3*8 // M1
(p[B]) st8 [dst_pre_mem] = v[B], 128 // M2 prefetch dst from memory
(p[D]) st8 [dst_pre_l2] = n[D-C], 128 // M3 prefetch dst from L2
;;
(p[A]) ld8 v[A] = [src_pre_mem], 128 // M0 prefetch src from memory
(p[C]) ld8 n[0] = [src_pre_l2], 128 // M1 prefetch src from L2
(p[D]) st8 [dst0] = t1, 8 // M2
(p[D]) st8 [dst1] = t3, 8 // M3
;;
(p[D]) ld8 t5 = [src0], 8
(p[D]) ld8 t7 = [src1], 3*8
(p[D]) st8 [dst0] = t2, 3*8
(p[D]) st8 [dst1] = t4, 3*8
;;
(p[D]) ld8 t6 = [src0], 3*8
(p[D]) ld8 t10 = [src1], 8
(p[D]) st8 [dst0] = t5, 8
(p[D]) st8 [dst1] = t7, 3*8
;;
(p[D]) ld8 t9 = [src0], 3*8
(p[D]) ld8 t11 = [src1], 3*8
(p[D]) st8 [dst0] = t6, 3*8
(p[D]) st8 [dst1] = t10, 8
;;
(p[D]) ld8 t12 = [src0], 8
(p[D]) ld8 t14 = [src1], 8
(p[D]) st8 [dst0] = t9, 3*8
(p[D]) st8 [dst1] = t11, 3*8
;;
(p[D]) ld8 t13 = [src0], 4*8
(p[D]) ld8 t15 = [src1], 4*8
(p[D]) st8 [dst0] = t12, 8
(p[D]) st8 [dst1] = t14, 8
;;
(p[D-1])ld8 t1 = [src0], 8
(p[D-1])ld8 t3 = [src1], 8
(p[D]) st8 [dst0] = t13, 4*8
(p[D]) st8 [dst1] = t15, 4*8
br.ctop.sptk .line_copy
;;
mov ar.lc = saved_lc
mov pr = saved_pr, -1
br.ret.sptk.many rp
END(copy_page)