satip-axe/patches/minisatip5-axe.patch

diff --git a/adapter.c b/adapter.c
index 033490a..36b3dfd 100644
--- a/adapter.c
+++ b/adapter.c
@@ -49,6 +49,31 @@ extern struct struct_opts opts;
 int tuner_s2, tuner_t, tuner_c, tuner_t2, tuner_c2;
 void find_dvb_adapter(adapter **a);
 
+adapter *adapter_alloc()
+{
+	adapter *ad = malloc1(sizeof(adapter));
+
+	/* diseqc setup */
+	ad->diseqc_param.fast = opts.diseqc_fast;
+	ad->diseqc_param.committed_no = opts.diseqc_committed_no;
+	ad->diseqc_param.uncommitted_no = opts.diseqc_uncommitted_no;
+
+	/* diseqc default timing */
+	ad->diseqc_param.before_cmd = opts.diseqc_before_cmd;
+	ad->diseqc_param.after_cmd = opts.diseqc_after_cmd;
+	ad->diseqc_param.after_repeated_cmd = opts.diseqc_after_repeated_cmd;
+	ad->diseqc_param.after_switch = opts.diseqc_after_switch;
+	ad->diseqc_param.after_burst = opts.diseqc_after_burst;
+	ad->diseqc_param.after_tone = opts.diseqc_after_tone;
+
+	/* diseqc state control */
+	ad->old_diseqc = -1;
+	ad->old_hiband = -1;
+	ad->old_pol = -1;
+	
+	return ad;
+}
+
 void find_adapters()
 {
 	static int init_find_adapter;
@@ -294,6 +319,9 @@ void close_adapter(int na)
 	ad->dvr = 0;
 	ad->strength = 0;
 	ad->snr = 0;
+	ad->old_diseqc = -1;
+	ad->old_hiband = -1;
+	ad->old_pol = -1;
 	mutex_unlock(&ad->mutex);
 	mutex_destroy(&ad->mutex);
 	//      if(a[na]->buf)free1(a[na]->buf);a[na]->buf=NULL;
@@ -381,19 +409,39 @@ void dump_pids(int aid)
 		}
 }
 
-#define return_adapter(i) { \
-	if(!init_hw(i)) \
-		return i; \
+int adapter_match(adapter *ad, int freq, int pol, int msys, int src, int diseqc)
+{
+	if (!ad->tp.freq == freq)
+		return 0;
+	if (msys == SYS_DVBS2 || msys == SYS_DVBS)
+	{
+		if (ad->tp.pol == pol && ad->tp.diseqc == diseqc)
+			return 1;
+		return 0;
+	}
+	return 1;
 }
 
-int get_free_adapter(int freq, int pol, int msys, int src)
+int get_free_adapter(int freq, int pol, int msys, int src, int diseqc)
 {
 	int i;
 	adapter *ad;
 //	init_all_hw();
 
-	i = (src > 0) ? src - 1 : 0;
-	ad = get_adapter(i);
+	if (src > 0) {
+		i = src - 1;
+		ad = a[i];
+		if (!delsys_match(ad, msys))
+			ad = NULL;
+		if (ad && !ad->enabled)
+		{
+			if (init_hw(i))
+				goto noadapter;
+			ad = get_adapter(i);
+		}
+	} else {
+		ad = get_adapter(i = 0);
+	}
 	if (ad)
 		LOG("get free adapter %d - a[%d] => e:%d m:%d sid_cnt:%d f:%d pol=%d",
 				src - 1, i, ad->enabled, ad->master_sid, ad->sid_cnt,
@@ -404,13 +452,14 @@ int get_free_adapter(int freq, int pol, int msys, int src)
 
 	if (src > 0)
 	{
-		if (ad)
+		if (ad && delsys_match(ad, msys))
 		{
-			if (ad->sid_cnt == 0 && delsys_match(ad, msys))
+			if (ad->sid_cnt == 0)
 				return i;
-			if (ad->tp.freq == freq && delsys_match(ad, msys))
+			if (adapter_match(ad, freq, pol, msys, src, diseqc))
 				return i;
 		}
+		goto noadapter;
 	}
 	for (i = 0; i < MAX_ADAPTERS; i++)
 	{
@@ -419,21 +468,17 @@ int get_free_adapter(int freq, int pol, int msys, int src)
 				&& delsys_match(ad, msys))
 			return i;
 		if (!ad && delsys_match(a[i], msys)) // device is not initialized
-			return_adapter(i);
+		{
+			if(!init_hw(i))
+				return i;
+		}
 	}
 
 	for (i = 0; i < MAX_ADAPTERS; i++)
-		if ((ad = get_adapter_nw(i)) && a[i]->tp.freq == freq
-				&& delsys_match(ad, msys))
-		{
-			if ((msys == SYS_DVBS2 || msys == SYS_DVBS))
-			{
-				if (ad->tp.pol == pol)
-					return i;
-			}
-			else
+		if ((ad = get_adapter_nw(i)) && delsys_match(ad, msys))
+			if (adapter_match(ad, freq, pol, msys, src, diseqc))
 				return i;
-		}
+noadapter:
 	LOG("no adapter found for f:%d pol:%d msys:%d", freq, pol, msys);
 	dump_adapters();
 	return -1;
@@ -557,19 +602,13 @@ int tune(int aid, int sid)
 	ad->last_sort = getTick();
 	if (sid == ad->master_sid && ad->do_tune)
 	{
-		ad->tp.switch_type = ad->switch_type;
-		ad->tp.uslot = ad->uslot;
-		ad->tp.ufreq = ad->ufreq;
-		ad->tp.pin = ad->pin;
-		ad->tp.only13v = ad->only13v;
-
-		ad->tp.committed_no = ad->committed_no;
-		ad->tp.uncommitted_no = ad->uncommitted_no;
+		ad->tp.diseqc_param = ad->diseqc_param;
 
 		rv = ad->tune(ad->id, &ad->tp);
 		ad->status = -1;
 		ad->status_cnt = 0;
 		set_socket_pos(ad->sock, 0);	// flush the existing buffer
+		set_socket_skip(ad->sock);
 		ad->rlen = 0;
 		if (ad->sid_cnt > 1)	 // the master changed the frequency
 		{
@@ -1067,7 +1106,7 @@ void set_unicable_adapters(char *o, int type)
 			continue;
 
 		if (!a[a_id])
-			a[a_id] = malloc(sizeof(adapter));
+			a[a_id] = adapter_alloc();
 		ad = a[a_id];
 
 		sep1 = strchr(arg[i], ':');
@@ -1084,11 +1123,11 @@ void set_unicable_adapters(char *o, int type)
 		sep3 = strchr(sep2 + 1, '-');
 		pin = map_intd(sep3, NULL, 0);
 
-		ad->uslot = slot;
-		ad->ufreq = freq;
-		ad->switch_type = type;
-		ad->pin = pin;
-		ad->only13v = o13v;
+		ad->diseqc_param.uslot = slot;
+		ad->diseqc_param.ufreq = freq;
+		ad->diseqc_param.switch_type = type;
+		ad->diseqc_param.pin = pin;
+		ad->diseqc_param.only13v = o13v;
 		LOGL(0, "Setting %s adapter %d slot %d freq %d",
 				type == SWITCH_UNICABLE ? "unicable" : "jess", a_id, slot, freq);
 	}
@@ -1096,35 +1135,115 @@ void set_unicable_adapters(char *o, int type)
 
 void set_diseqc_adapters(char *o)
 {
-	int i, la, a_id, committed_no, uncommitted_no;
+	int i, la, a_id, fast, committed_no, uncommitted_no;
 	char buf[100], *arg[20], *sep1, *sep2;
 	adapter *ad;
 	strncpy(buf, o, sizeof(buf));
 	la = split(arg, buf, sizeof(arg), ',');
 	for (i = 0; i < la; i++)
 	{
-		a_id = map_intd(arg[i], NULL, -1);
-		if (a_id < 0 || a_id >= MAX_ADAPTERS)
-			continue;
+		if (arg[i] && arg[i][0] == '*') {
+			ad = NULL;
+			a_id = -1;
+		} else {
+			a_id = map_intd(arg[i], NULL, -1);
+			if (a_id < 0 || a_id >= MAX_ADAPTERS)
+				continue;
 
-		if (!a[a_id])
-			a[a_id] = malloc(sizeof(adapter));
-		ad = a[a_id];
+			if (!a[a_id])
+				a[a_id] = adapter_alloc();
+			ad = a[a_id];
+		}
 
 		sep1 = strchr(arg[i], ':');
 		sep2 = strchr(arg[i], '-');
 
 		if (!sep1 || !sep2)
 			continue;
+		if ((fast = (sep1[1] == '*')) != 0)
+			sep1++;
 		committed_no = map_intd(sep1 + 1, NULL, -1);
 		uncommitted_no = map_intd(sep2 + 1, NULL, -1);
 		if (committed_no < 0 || uncommitted_no < 0)
 			continue;
 
-		ad->committed_no = committed_no;
-		ad->uncommitted_no = uncommitted_no;
-		LOGL(0, "Setting diseqc adapter %d committed_no %d uncommitted_no %d",
-				a_id, committed_no, uncommitted_no);
+		if (ad) {
+			ad->diseqc_param.fast = fast;
+			ad->diseqc_param.committed_no = committed_no;
+			ad->diseqc_param.uncommitted_no = uncommitted_no;
+		} else {
+			opts.diseqc_fast = fast;
+			opts.diseqc_committed_no = committed_no;
+			opts.diseqc_uncommitted_no = uncommitted_no;
+		}
+		LOGL(0, "Setting diseqc adapter %d fast %d committed_no %d uncommitted_no %d",
+				a_id, fast, committed_no, uncommitted_no);
+	}
+}
+
+void set_diseqc_timing(char *o)
+{
+	int i, la, a_id;
+	int before_cmd, after_cmd, after_repeated_cmd;
+	int after_switch, after_burst, after_tone;
+	char buf[2000], *arg[20];
+	char *sep1, *sep2, *sep3, *sep4, *sep5, *sep6, *sep7;
+	adapter *ad;
+	strncpy(buf, o, sizeof(buf));
+	la = split(arg, buf, sizeof(arg), ',');
+	for (i = 0; i < la; i++)
+	{
+		if (arg[i] && arg[i][0] == '*') {
+			ad = NULL;
+			a_id = -1;
+		} else {
+			a_id = map_intd(arg[i], NULL, -1);
+			if (a_id < 0 || a_id >= MAX_ADAPTERS)
+				continue;
+
+			if (!a[a_id])
+				a[a_id] = adapter_alloc();
+			ad = a[a_id];
+		}
+
+		sep1 = strchr(arg[i], ':');
+		sep2 = strchr(arg[i], '-');
+		sep3 = sep2 ? strchr(sep2 + 1, '-') : NULL;
+		sep4 = sep3 ? strchr(sep3 + 1, '-') : NULL;
+		sep5 = sep4 ? strchr(sep4 + 1, '-') : NULL;
+		sep6 = sep5 ? strchr(sep5 + 1, '-') : NULL;
+
+		if (!sep1 || !sep2 || !sep3 || !sep4 || !sep5 || !sep6)
+			continue;
+		before_cmd = map_intd(sep1 + 1, NULL, -1);
+		after_cmd = map_intd(sep2 + 1, NULL, -1);
+		after_repeated_cmd = map_intd(sep3 + 1, NULL, -1);
+		after_switch = map_intd(sep4 + 1, NULL, -1);
+		after_burst = map_intd(sep5 + 1, NULL, -1);
+		after_tone = map_intd(sep6 + 1, NULL, -1);
+		if (before_cmd < 0 || after_cmd < 0 || after_repeated_cmd < 0 ||
+		    after_switch < 0 || after_burst < 0 || after_tone < 0)
+			continue;
+
+		if (ad) {
+			ad->diseqc_param.before_cmd = before_cmd;
+			ad->diseqc_param.after_cmd = after_cmd;
+			ad->diseqc_param.after_repeated_cmd = after_repeated_cmd;
+			ad->diseqc_param.after_switch = after_switch;
+			ad->diseqc_param.after_burst = after_burst;
+			ad->diseqc_param.after_tone = after_tone;
+		} else {
+			opts.diseqc_before_cmd = before_cmd;
+			opts.diseqc_after_cmd = after_cmd;
+			opts.diseqc_after_repeated_cmd = after_repeated_cmd;
+			opts.diseqc_after_switch = after_switch;
+			opts.diseqc_after_burst = after_burst;
+			opts.diseqc_after_tone = after_tone;
+		}
+		LOGL(0, "Setting diseqc timing for adapter %d before cmd %d after cmd %d "
+		        "after repeated cmd %d after switch %d after burst %d after tone %d",
+				a_id, before_cmd, after_cmd, after_repeated_cmd,
+				after_switch, after_burst, after_tone);
 	}
 }
 
@@ -1152,16 +1271,43 @@ void set_slave_adapters(char *o)
 		for (j = a_id; j <= a_id2; j++)
 		{
 			if (!a[j])
-				a[j] = malloc1(sizeof(adapter));
+				a[j] = adapter_alloc();
 
 			ad = a[j];
-			ad->switch_type = SWITCH_SLAVE;
+			ad->diseqc_param.switch_type = SWITCH_SLAVE;
 
 			LOGL(0, "Setting slave adapter %d", j);
 		}
 
 	}
 }
+
+void set_link_adapters(char *o)
+{
+	int i, la, a_id, b_id;
+	char buf[100], *arg[20], *sep1;
+
+	strncpy(buf, o, sizeof(buf)-1);
+	buf[sizeof(buf)-1] = '\0';
+	la = split(arg, buf, sizeof(arg), ',');
+	for (i=0; i<la; i++)
+	{
+		a_id=map_intd(arg[i], NULL, -1);
+		if (a_id < 0 || a_id >= MAX_ADAPTERS)
+			continue;
+		sep1 = strchr(arg[i], ':');
+		if (!sep1)
+			continue;
+		b_id=map_intd(sep1 + 1, NULL, -1);
+		if (b_id < 0 || b_id >= MAX_ADAPTERS)
+			continue;;
+		if (a_id == b_id || a[a_id]->slave)
+			continue;
+		a[a_id]->slave = a_id + 1;
+		LOG("Setting adapter %d as master for adapter %d", a_id, b_id);
+	}
+}
+
 extern char *fe_delsys[];
 void set_adapters_delsys(char *o)
 {
@@ -1186,7 +1332,7 @@ void set_adapters_delsys(char *o)
 		ds = map_intd(sep + 1, fe_delsys, 0);
 
 		if (!a[a_id])
-			a[a_id] = malloc1(sizeof(adapter));
+			a[a_id] = adapter_alloc();
 
 		ad = a[a_id];
 		ad->sys[0] = ds;
@@ -1371,42 +1517,24 @@ char *get_all_delsys(int aid, char *dest, int max_size)
 	return dest;
 }
 
-adapter *a_tmp;
-
 _symbols adapters_sym[] =
 {
-{ "ad_enabled", VAR_AARRAY_INT8, a, 1, MAX_ADAPTERS,
-		(long int) &a_tmp[0].enabled - (long int) &a_tmp[0] },
-{ "ad_type", VAR_AARRAY_INT8, a, 1, MAX_ADAPTERS, (long int) &a_tmp[0].type
-		- (long int) &a_tmp[0] },
-{ "ad_freq", VAR_AARRAY_INT, a, 1. / 1000,
-MAX_ADAPTERS, (long int) &a_tmp[0].tp.freq - (long int) &a_tmp[0] },
-{ "ad_strength", VAR_AARRAY_UINT16, a, 1,
-MAX_ADAPTERS, (long int) &a_tmp[0].strength - (long int) &a_tmp[0] },
-{ "ad_snr", VAR_AARRAY_UINT16, a, 1, MAX_ADAPTERS, (long int) &a_tmp[0].snr
-		- (long int) &a_tmp[0] },
-{ "ad_ber", VAR_AARRAY_UINT16, a, 1, MAX_ADAPTERS, (long int) &a_tmp[0].ber
-		- (long int) &a_tmp[0] },
-{ "ad_pol", VAR_AARRAY_INT8, a, 1, MAX_ADAPTERS, (long int) &a_tmp[0].tp.pol
-		- (long int) &a_tmp[0] },
-{ "ad_sr", VAR_AARRAY_INT, a, 1. / 1000, MAX_ADAPTERS,
-		(long int) &a_tmp[0].tp.sr - (long int) &a_tmp[0] },
-{ "ad_bw", VAR_AARRAY_INT, a, 1. / 1000, MAX_ADAPTERS,
-		(long int) &a_tmp[0].tp.bw - (long int) &a_tmp[0] },
-{ "ad_diseqc", VAR_AARRAY_INT, a, 1, MAX_ADAPTERS,
-		(long int) &a_tmp[0].tp.diseqc - (long int) &a_tmp[0] },
-{ "ad_fe", VAR_AARRAY_INT, a, 1, MAX_ADAPTERS, (long int) &a_tmp[0].fe
-		- (long int) &a_tmp[0] },
-{ "ad_master", VAR_AARRAY_UINT8, a, 1,
-MAX_ADAPTERS, (long int) &a_tmp[0].master_sid - (long int) &a_tmp[0] },
-{ "ad_sidcount", VAR_AARRAY_UINT8, a, 1,
-MAX_ADAPTERS, (long int) &a_tmp[0].sid_cnt - (long int) &a_tmp[0] },
-{ "ad_phyad", VAR_AARRAY_INT, a, 1, MAX_ADAPTERS, (long int) &a_tmp[0].pa
-		- (long int) &a_tmp[0] },
-{ "ad_phyfd", VAR_AARRAY_INT, a, 1, MAX_ADAPTERS, (long int) &a_tmp[0].fn
-		- (long int) &a_tmp[0] },
-{ "ad_sys", VAR_AARRAY_INT, a, 1, MAX_ADAPTERS, (long int) &a_tmp[0].tp.sys
-		- (long int) &a_tmp[0] },
+{ "ad_enabled", VAR_AARRAY_INT8, a, 1, MAX_ADAPTERS, offsetof(adapter, enabled) },
+{ "ad_type", VAR_AARRAY_INT8, a, 1, MAX_ADAPTERS, offsetof(adapter, type) },
+{ "ad_freq", VAR_AARRAY_INT, a, 1. / 1000, MAX_ADAPTERS, offsetof(adapter, tp.freq) },
+{ "ad_strength", VAR_AARRAY_UINT16, a, 1, MAX_ADAPTERS, offsetof(adapter, strength) },
+{ "ad_snr", VAR_AARRAY_UINT16, a, 1, MAX_ADAPTERS, offsetof(adapter, snr) },
+{ "ad_ber", VAR_AARRAY_UINT16, a, 1, MAX_ADAPTERS, offsetof(adapter, ber) },
+{ "ad_pol", VAR_AARRAY_INT8, a, 1, MAX_ADAPTERS, offsetof(adapter, tp.pol) },
+{ "ad_sr", VAR_AARRAY_INT, a, 1. / 1000, MAX_ADAPTERS, offsetof(adapter, tp.sr) },
+{ "ad_bw", VAR_AARRAY_INT, a, 1. / 1000, MAX_ADAPTERS, offsetof(adapter, tp.bw) },
+{ "ad_diseqc", VAR_AARRAY_INT, a, 1, MAX_ADAPTERS, offsetof(adapter, tp.diseqc) },
+{ "ad_fe", VAR_AARRAY_INT, a, 1, MAX_ADAPTERS, offsetof(adapter, fe) },
+{ "ad_master", VAR_AARRAY_UINT8, a, 1, MAX_ADAPTERS, offsetof(adapter, master_sid) },
+{ "ad_sidcount", VAR_AARRAY_UINT8, a, 1, MAX_ADAPTERS, offsetof(adapter, sid_cnt) },
+{ "ad_phyad", VAR_AARRAY_INT, a, 1, MAX_ADAPTERS, offsetof(adapter, pa) },
+{ "ad_phyfd", VAR_AARRAY_INT, a, 1, MAX_ADAPTERS, offsetof(adapter, fn) },
+{ "ad_sys", VAR_AARRAY_INT, a, 1, MAX_ADAPTERS, offsetof(adapter, tp.sys) },
 { "ad_allsys", VAR_FUNCTION_STRING, (void *) &get_all_delsys, 0, 0, 0 },
 { "ad_pids", VAR_FUNCTION_STRING, (void *) &get_adapter_pids, 0, 0, 0 },
 { "tuner_s2", VAR_INT, &tuner_s2, 1, 0, 0 },
diff --git a/adapter.h b/adapter.h
index e693479..b37c238 100644
--- a/adapter.h
+++ b/adapter.h
@@ -6,7 +6,11 @@
 typedef struct ca_device ca_device_t;
 
 #define MAX_ADAPTERS 16
+#ifdef AXE
+#define DVR_BUFFER 14*7*DVB_FRAME
+#else
 #define DVR_BUFFER 30*1024*188
+#endif
 #ifdef NO_BACKTRACE
 #define MAX_STREAMS_PER_PID 8
 #else
@@ -83,12 +87,11 @@ typedef struct struct_adapter
 	uint32_t ber;
 	uint16_t strength, snr, max_strength, max_snr;
 	uint32_t pid_err, dec_err; // detect pids received but not part of any stream, decrypt errors
-	int switch_type;
-	int uslot; // unicable/jess slot
-	int ufreq; // unicable/jess frequency	
-	int pin;
-	int only13v; // unicable - use 13V voltage only
-	int committed_no, uncommitted_no; // diseqc info
+	int slave;
+	diseqc diseqc_param;
+	int old_diseqc;
+	int old_hiband;
+	int old_pol;
 	int id;
 	int pat_processed, transponder_id, pat_ver;
 	char name[5];
@@ -109,8 +112,9 @@ extern int a_count;
 int init_hw(int dev);
 int init_all_hw();
 int getAdaptersCount();
+adapter *adapter_alloc();
 void close_adapter(int na);
-int get_free_adapter(int freq, int pol, int msys, int src);
+int get_free_adapter(int freq, int pol, int msys, int src, int diseqc);
 int set_adapter_for_stream(int i, int a);
 void close_adapter_for_stream(int sid, int aid);
 int set_adapter_parameters(int aid, int sid, transponder * tp);
@@ -128,7 +132,9 @@ void sort_pids(int aid);
 void enable_adapters(char *o);
 void set_unicable_adapters(char *o, int type);
 void set_diseqc_adapters(char *o);
+void set_diseqc_timing(char *o);
 void set_slave_adapters(char *o);
+void set_link_adapters(char *o);
 void reset_pids_type(int aid, int clear_pat);
 void reset_ecm_type_for_key(int aid, int key);
 int delsys_match(adapter *ad, int del_sys);
diff --git a/axe.h b/axe.h
new file mode 100644
index 0000000..d8b06bc
--- /dev/null
+++ b/axe.h
@@ -0,0 +1,149 @@
+#ifndef __AXE_H
+#define __AXE_H
+
+#include <linux/dvb/dmx.h>
+#include <linux/dvb/frontend.h>
+
+typedef struct fe_frontend_status fe_frontend_status_t;
+
+struct fe_frontend_status {
+  __u32 val0;
+  __u32 val1;
+  __u32 val2;
+  __u32 modulation;
+  __u32 val4;
+  __u32 frequency;
+  __u32 val6;
+  __u32 val7;
+  __u32 symbol_rate;
+  __u32 val9;
+  __u32 fec;
+  __u32 rolloff;
+  __u32 val12;
+  __u32 val13;
+} __attribute__ ((packed));
+
+#define FE_FRONTEND_STANDBY     _IOW('o', 91, __u32)
+#define FE_FRONTEND_RESET	_IO('o', 93)
+#define FE_FRONTEND_STATUS      _IOR('o', 96, fe_frontend_status_t)
+#define FE_FRONTEND_INPUT	_IOW('o', 97, __u8)
+
+static inline int axe_fe_standby(int fd, __u32 stdby)
+{
+  return ioctl(fd, FE_FRONTEND_STANDBY, &stdby);
+}
+
+static inline int axe_fe_reset(int fd)
+{
+  return ioctl(fd, FE_FRONTEND_RESET, 0x54);
+}
+
+static inline int axe_fe_input(int fd, __u8 in)
+{
+  return ioctl(fd, FE_FRONTEND_INPUT, &in);
+}
+
+typedef struct dmx_stream_params_s {
+  __u32  srcIp;
+  __u16  srcPort;
+  __u16  dstPort;
+  __u32  dstIp;
+  __u32  ts;     /* timestamp              */
+  __u32  ssrc;   /* synchronization source */
+  __u16  seq;
+} dmx_stream_params_t;
+
+typedef struct rtp_state {
+  __u32 ssrc;
+  __u32 ts;
+  __u32 spc;
+  __u32 soc;
+  __u16 seq;
+} rtp_state_t;
+
+#define DMXTS_ADD_PID            _IOW('o', 1, __u16)
+#define DMXTS_REMOVE_PID         _IOW('o', 2, __u16)
+
+#define DMXTS_TRANSFER_START      _IO('o', 5)
+#define DMXTS_TRANSFER_START_RTP _IOW('o', 6, dmx_stream_params_t)
+#define DMXTS_TRANSFER_STOP       _IO('o', 7)
+#define DMXTS_RTP_SETUP_SSRC     _IOW('o', 8, __u32)
+#define DMXTS_TRANSFER_PAUSE      _IO('o', 9)
+#define DMXTS_TRANSFER_RESUME     _IO('o', 10)
+
+#define DMXTS_GET_RTP_STREAM_STATE _IOR('o', 11, rtp_state_t)
+
+static inline int axe_dmxts_add_pid(int fd, __u16 pid)
+{
+  return ioctl(fd, DMXTS_ADD_PID, &pid);
+}
+
+static inline int axe_dmxts_remove_pid(int fd, __u16 pid)
+{
+  return ioctl(fd, DMXTS_REMOVE_PID, &pid);
+}
+
+static inline int axe_dmxts_start(int fd)
+{
+  return ioctl(fd, DMXTS_TRANSFER_START);
+}
+
+#ifdef AXE_MAIN
+
+int axe_fp_fd = -1;
+
+static inline axe_fp_fd_open(void)
+{
+  if (axe_fp_fd < 0)
+    axe_fp_fd = open("/dev/axe/fp-0", O_WRONLY);
+}
+
+static inline axe_fp_fd_write(const char *s)
+{
+  const char *b;
+  size_t len;
+  ssize_t r;
+
+  axe_fp_fd_open();
+  len = strlen(b = s);
+  while (len > 0) {
+    r = write(axe_fp_fd, b, len);
+    if (r > 0) {
+      len -= r;
+      b += r;
+    }
+  }
+}
+
+void axe_set_tuner_led(int tuner, int on)
+{
+  static int state = 0;
+  char buf[16];
+  if (((state >> tuner) & 1) != !!on) {
+    sprintf(buf, "T%d_LED %d\n", tuner, on ? 1 : 0);
+    axe_fp_fd_write(buf);
+    if (on)
+      state |= 1 << tuner;
+    else
+      state &= ~(1 << tuner);
+  }
+}
+
+void axe_set_network_led(int on)
+{
+  static int state = -1;
+  if (state != on) {
+    axe_fp_fd_write(on ? "NET_LED 1\n" : "NET_LED 0\n");
+    state = on;
+  }
+}
+
+#else
+
+void axe_set_tuner_led(int tuner, int on);
+void axe_set_network_led(int on);
+void axe_status(char *buf, size_t buflen);
+
+#endif
+
+#endif
diff --git a/dvb.c b/dvb.c
index 259b93d..8040849 100644
--- a/dvb.c
+++ b/dvb.c
@@ -42,6 +42,11 @@
 #include "ca.h"
 #include "utils.h"
 
+#ifdef AXE
+#define AXE_MAIN 1
+#include "axe.h"
+#endif
+
 char *fe_pilot[] =
 { "on", "off", " ", //auto
 		NULL };
@@ -235,7 +240,6 @@ void init_dvb_parameters(transponder * tp)
 	tp->mtype = -1;
 	tp->plts = PILOT_AUTO;
 	tp->fec = FEC_AUTO;
-	tp->old_diseqc = tp->old_pol = tp->old_hiband = -1;
 }
 
 void copy_dvb_parameters(transponder * s, transponder * d)
@@ -330,13 +334,25 @@ int dvb_open_device(adapter *ad)
 	char buf[100];
 	LOG("trying to open [%d] adapter %d and frontend %d", ad->id, ad->pa,
 			ad->fn);
+#ifdef AXE
+	sprintf(buf, "/dev/axe/frontend-%d", ad->pa);
+#else
 	sprintf(buf, "/dev/dvb/adapter%d/frontend%d", ad->pa, ad->fn);
+#endif
 	ad->fe = open(buf, O_RDWR | O_NONBLOCK);
+#ifdef AXE
+	sprintf(buf, "/dev/axe/demuxts-%d", ad->pa);
+#else
 	sprintf(buf, "/dev/dvb/adapter%d/dvr%d", ad->pa, ad->fn);
+#endif
 	ad->dvr = open(buf, O_RDONLY | O_NONBLOCK);
 	if (ad->fe < 0 || ad->dvr < 0)
 	{
+#ifdef AXE
+		sprintf(buf, "/dev/axe/frontend-%d", ad->pa);
+#else
 		sprintf(buf, "/dev/dvb/adapter%d/frontend%d", ad->pa, ad->fn);
+#endif
 		LOGL(0, "Could not open %s in RW mode (fe: %d, dvr: %d)", buf, ad->fe,
 				ad->dvr);
 		if (ad->fe >= 0)
@@ -349,31 +365,41 @@ int dvb_open_device(adapter *ad)
 	ad->type = ADAPTER_DVB;
 
 	LOG("opened DVB adapter %d fe:%d dvr:%d", ad->id, ad->fe, ad->dvr);
+#ifndef AXE
 	if (ioctl(ad->dvr, DMX_SET_BUFFER_SIZE, opts.dvr_buffer) < 0)
 		LOG("couldn't set DVR buffer size error %d: %s", errno, strerror(errno))
 	else
 		LOG("Done setting DVR buffer to %d bytes", opts.dvr_buffer);
+#endif
 	return 0;
 }
 
-void diseqc_cmd(int fd, int times, char *str, struct dvb_diseqc_master_cmd *cmd)
+void msleep(long ms)
+{
+	if (ms > 0)
+		usleep(ms * 1000);
+}
+
+void diseqc_cmd(int fd, int times, char *str, struct dvb_diseqc_master_cmd *cmd,
+                diseqc *d)
 {
 	int i;
+	msleep(d->before_cmd);
 	for (i = 0; i < times; i++)
 	{
-		usleep(15000);
 		if (ioctl(fd, FE_DISEQC_SEND_MASTER_CMD, cmd) == -1)
 			LOG(
 					"send_diseqc: FE_DISEQC_SEND_MASTER_CMD %s failed for fd %d: %s",
 					str, fd, strerror(errno));
-		usleep(54000);
+		msleep(i > 0 ? d->after_repeated_cmd : d->after_cmd);
 	}
 
 }
 
-int send_diseqc(int fd, int pos, int pol, int hiband, int committed_no,
-		int uncommitted_no)
+int send_diseqc(int fd, int pos, int pos_change, int pol, int hiband, diseqc *d)
 {
+	int committed_no = d->committed_no;
+	int uncommitted_no = d->uncommitted_no;
 	int uncommitted_first = 0;
 	int posu, posc;
 	/* DiSEqC 1.0 */
@@ -412,77 +438,83 @@ int send_diseqc(int fd, int pos, int pol, int hiband, int committed_no,
 		LOG("send_diseqc: FE_SET_VOLTAGE failed for fd %d: %s", fd,
 				strerror(errno));
 
-	if (uncommitted_first)
-		diseqc_cmd(fd, uncommitted_no, "uncommitted", &uncmd);
+	if (!d->fast || pos_change) {
 
-	diseqc_cmd(fd, committed_no, "committed", &cmd);
+		if (uncommitted_first)
+			diseqc_cmd(fd, uncommitted_no, "uncommitted", &uncmd, d);
 
-	if (!uncommitted_first)
-		diseqc_cmd(fd, uncommitted_no, "uncommitted", &uncmd);
+		diseqc_cmd(fd, committed_no, "committed", &cmd, d);
 
-	usleep(15000);
-	if (ioctl(fd, FE_DISEQC_SEND_BURST, (pos & 1) ? SEC_MINI_B : SEC_MINI_A)
-			== -1)
-		LOG("send_diseqc: FE_DISEQC_SEND_BURST failed for fd %d: %s", fd,
-				strerror(errno));
-	usleep(15000);
+		if (!uncommitted_first)
+			diseqc_cmd(fd, uncommitted_no, "uncommitted", &uncmd, d);
+
+		msleep(d->after_switch);
+
+		if (ioctl(fd, FE_DISEQC_SEND_BURST, (pos & 1) ? SEC_MINI_B : SEC_MINI_A) == -1)
+			LOG("send_diseqc: FE_DISEQC_SEND_BURST failed for fd %d: %s", fd,
+			    strerror(errno));
+
+	}
+
+	msleep(d->after_burst);
 
 	if (ioctl(fd, FE_SET_TONE, hiband ? SEC_TONE_ON : SEC_TONE_OFF) == -1)
 		LOG("send_diseqc: FE_SET_TONE failed for fd %d: %s", fd,
 				strerror(errno));
 
+	msleep(d->after_tone);
+
 	return 0;
 }
 
-int send_unicable(int fd, int freq, int pos, int pol, int hiband, int slot,
-		int ufreq, int pin, int o13v)
+int send_unicable(int fd, int freq, int pos, int pol, int hiband, diseqc *d)
 {
 	struct dvb_diseqc_master_cmd cmd =
 	{
 	{ 0xe0, 0x11, 0x5a, 0x00, 0x00 }, 5 };
 	int t;
 
-	t = (freq + ufreq + 2) / 4 - 350;
+	t = (freq + d->ufreq + 2) / 4 - 350;
 
-	cmd.msg[3] = ((t & 0x0300) >> 8) | (slot << 5) | (pos ? 0x10 : 0)
+	cmd.msg[3] = ((t & 0x0300) >> 8) | (d->uslot << 5) | (pos ? 0x10 : 0)
 			| (hiband ? 4 : 0) | (pol ? 8 : 0);
 	cmd.msg[4] = t & 0xff;
 
-	if (pin)
+	if (d->pin)
 	{
 		cmd.msg_len = 6;
 		cmd.msg[2] = 0x5C;
-		cmd.msg[5] = pin;
+		cmd.msg[5] = d->pin;
 	}
 
 	LOGL(3,
 			"send_unicable fd %d, freq %d, ufreq %d, pos = %d, pol = %d, hiband = %d, slot %d, diseqc => %02x %02x %02x %02x %02x",
-			fd, freq, ufreq, pos, pol, hiband, slot, cmd.msg[0], cmd.msg[1],
+			fd, freq, d->ufreq, pos, pol, hiband, d->uslot, cmd.msg[0], cmd.msg[1],
 			cmd.msg[2], cmd.msg[3], cmd.msg[4]);
 	if (ioctl(fd, FE_SET_VOLTAGE, SEC_VOLTAGE_13) == -1)
 		LOG("send_unicable: pre voltage  SEC_VOLTAGE_13 failed for fd %d: %s",
 				fd, strerror(errno));
-	usleep(15000);
+	msleep(d->before_cmd);
 	if (ioctl(fd, FE_SET_TONE, SEC_TONE_OFF) == -1)
 		LOG("send_unicable: FE_SET_TONE failed for fd %d: %s", fd,
 				strerror(errno));
-	if (!o13v && ioctl(fd, FE_SET_VOLTAGE, SEC_VOLTAGE_18) == -1)
+	if (!d->only13v && ioctl(fd, FE_SET_VOLTAGE, SEC_VOLTAGE_18) == -1)
 		LOG("send_unicable: FE_SET_VOLTAGE failed for fd %d: %s", fd,
 				strerror(errno));
-	usleep(15000);
+	msleep(d->after_burst);
 	if (ioctl(fd, FE_DISEQC_SEND_MASTER_CMD, &cmd) == -1)
 		LOG("send_unicable: FE_DISEQC_SEND_MASTER_CMD failed for fd %d: %s", fd,
 				strerror(errno));
-	usleep(15000);
+	msleep(d->after_repeated_cmd);
 	if (ioctl(fd, FE_SET_VOLTAGE, SEC_VOLTAGE_13) == -1)
 		LOG("send_unicable: FE_SET_VOLTAGE failed for fd %d: %s", fd,
 				strerror(errno));
+	msleep(d->after_tone);
 
-	return ufreq * 1000;
+	return d->ufreq * 1000;
 }
 
-int send_jess(int fd, int freq, int pos, int pol, int hiband, int slot,
-		int ufreq, int pin, int o13v)
+int send_jess(int fd, int freq, int pos, int pol, int hiband, diseqc *d)
 {
 	struct dvb_diseqc_master_cmd cmd =
 	{
@@ -490,44 +522,45 @@ int send_jess(int fd, int freq, int pos, int pol, int hiband, int slot,
 //	int t = (freq / 1000) - 100;
 	int t = freq - 100;
 
-	cmd.msg[1] = slot << 3;
+	cmd.msg[1] = d->uslot << 3;
 	cmd.msg[1] |= ((t << 8) & 0x07);
 	cmd.msg[2] = (t & 0xff);
 	cmd.msg[3] = ((pos & 0x3f) << 2) | (pol ? 2 : 0) | (hiband ? 1 : 0);
-	if (pin < 256)
+	if (d->pin < 256)
 	{
 		cmd.msg_len = 5;
 		cmd.msg[0] = 0x71;
-		cmd.msg[4] = pin;
+		cmd.msg[4] = d->pin;
 	}
 
 	LOGL(3,
 			"send_jess fd %d, freq %d, ufreq %d, pos = %d, pol = %d, hiband = %d, slot %d, diseqc => %02x %02x %02x %02x %02x",
-			fd, freq, ufreq, pos, pol, hiband, slot, cmd.msg[0], cmd.msg[1],
+			fd, freq, d->ufreq, pos, pol, hiband, d->uslot, cmd.msg[0], cmd.msg[1],
 			cmd.msg[2], cmd.msg[3], cmd.msg[4]);
 
 	if (ioctl(fd, FE_SET_VOLTAGE, SEC_VOLTAGE_13) == -1)
 		LOG("send_jess: pre voltage  SEC_VOLTAGE_13 failed for fd %d: %s", fd,
 				strerror(errno));
-	usleep(15000);
+	msleep(d->before_cmd);
 	if (ioctl(fd, FE_SET_TONE, SEC_TONE_OFF) == -1)
 		LOG("send_jess: FE_SET_TONE failed for fd %d: %s", fd, strerror(errno));
-	if (!o13v && ioctl(fd, FE_SET_VOLTAGE, SEC_VOLTAGE_18) == -1)
+	if (!d->only13v && ioctl(fd, FE_SET_VOLTAGE, SEC_VOLTAGE_18) == -1)
 		LOG("send_jess: FE_SET_VOLTAGE failed for fd %d: %s", fd,
 				strerror(errno));
-	usleep(15000);
+	msleep(d->after_burst);
 	if (ioctl(fd, FE_DISEQC_SEND_MASTER_CMD, &cmd) == -1)
 		LOG("send_jess: FE_DISEQC_SEND_MASTER_CMD failed for fd %d: %s", fd,
 				strerror(errno));
-	usleep(15000);
+	msleep(d->after_repeated_cmd);
 	if (ioctl(fd, FE_SET_VOLTAGE, SEC_VOLTAGE_13) == -1)
 		LOG("send_jess: FE_SET_VOLTAGE failed for fd %d: %s", fd,
 				strerror(errno));
+	msleep(d->after_tone);
 
-	return ufreq * 1000;
+	return d->ufreq * 1000;
 }
 
-int setup_switch(int frontend_fd, transponder *tp)
+int setup_switch(int frontend_fd, adapter *ad, transponder *tp)
 {
 	int hiband = 0;
 	int diseqc = (tp->diseqc > 0) ? tp->diseqc - 1 : 0;
@@ -550,35 +583,129 @@ int setup_switch(int frontend_fd, transponder *tp)
 		hiband = 1;
 	}
 
-	if (tp->switch_type == SWITCH_UNICABLE)
+#ifdef AXE
+	adapter *ad2, *adm;
+	int input = 0, aid;
+
+	if (tp->diseqc_param.switch_type != SWITCH_UNICABLE &&
+	    tp->diseqc_param.switch_type != SWITCH_JESS) {
+		input = ad->id;
+		if (ad && !opts.quattro) {
+			adm = get_adapter(ad->slave ? ad->slave - 1 : ad->pa);
+			if (adm == NULL) {
+				LOG("axe_fe: unknown master adapter %d", input);
+				return 0;
+			}
+			if (adm->old_pol >= 0) {
+				for (aid = 0; aid < 4; aid++) {
+					ad2 = get_adapter(aid);
+					if (!ad2 || ad == ad2) continue;
+					if (ad2->slave && ad2->slave - 1 != adm->pa) continue;
+					if (!ad2->slave && ad2 != adm) continue;
+					if (ad2->sid_cnt > 0) break;
+				}
+				if (adm != ad && aid < 4 &&
+				    (adm->old_pol != pol ||
+				     adm->old_hiband != hiband ||
+				     adm->old_diseqc != diseqc))
+					return 0;
+			}
+			if (ad->slave) {
+				input = ad->slave - 1;
+				adm = get_adapter(input);
+				if (adm == NULL) {
+					LOG("axe_fe: unknown master adapter %d", input);
+					return 0;
+				}
+				if(adm->old_pol != pol ||
+				   adm->old_hiband != hiband ||
+				   adm->old_diseqc != diseqc) {
+					send_diseqc(adm->fe, diseqc, adm->old_diseqc != diseqc,
+					            pol, hiband, &tp->diseqc_param);
+					adm->old_pol = pol;
+					adm->old_hiband = hiband;
+				        adm->old_diseqc = diseqc;
+				}
+				goto axe;
+			}
+		}
+		if (ad && opts.quattro) {
+			input = ((hiband ^ 1) << 1) | (pol ^ 1);
+			adm = get_adapter(input);
+			if (adm == NULL) {
+				LOG("axe_fe: unknown master adapter %d", input);
+				return 0;
+			}
+			if(adm->old_pol != pol || adm->old_hiband != hiband) {
+				send_diseqc(adm->fe, 0, 0, pol, hiband, &tp->diseqc_param);
+				adm->old_pol = pol;
+				adm->old_hiband = hiband;
+				adm->old_diseqc = diseqc = 0;
+			}
+		}
+	} else {
+		input = opts.axe_unicinp;
+		ad = get_adapter(input);
+		if (ad == NULL) {
+			LOGL(3, "axe setup: unable to find adapter %d", input);
+			return 0;
+		}
+	}
+#endif
+
+	if (tp->diseqc_param.switch_type == SWITCH_UNICABLE)
 	{
-		freq = send_unicable(frontend_fd, freq / 1000, diseqc, pol, hiband,
-				tp->uslot, tp->ufreq, tp->pin, tp->only13v);
+#ifdef AXE
+		if (ad)
+			freq = send_unicable(ad->fe, freq / 1000, diseqc,
+			                     pol, hiband, &tp->diseqc_param);
+#else
+		freq = send_unicable(frontend_fd, freq / 1000, diseqc,
+		                     pol, hiband, &tp->diseqc_param);
+#endif
 	}
-	else if (tp->switch_type == SWITCH_JESS)
+	else if (tp->diseqc_param.switch_type == SWITCH_JESS)
 	{
-		freq = send_jess(frontend_fd, freq / 1000, diseqc, pol, hiband,
-				tp->uslot, tp->ufreq, tp->pin, tp->only13v);
+#ifdef AXE
+		if (ad)
+			freq = send_jess(ad->fe, freq / 1000, diseqc,
+			                 pol, hiband, &tp->diseqc_param);
+#else
+		freq = send_jess(frontend_fd, freq / 1000, diseqc,
+		                 pol, hiband, &tp->diseqc_param);
+#endif
 	}
-	else if (tp->switch_type == SWITCH_SLAVE)
+	else if (tp->diseqc_param.switch_type == SWITCH_SLAVE)
 	{
 		LOGL(2, "FD %d is a slave adapter", frontend_fd);
 	}
 	else
 	{
-		if (tp->old_pol != pol || tp->old_hiband != hiband
-				|| tp->old_diseqc != diseqc)
-			send_diseqc(frontend_fd, diseqc, pol, hiband, tp->committed_no,
-					tp->uncommitted_no);
+		if (ad->old_pol != pol || ad->old_hiband != hiband
+				|| ad->old_diseqc != diseqc)
+			send_diseqc(frontend_fd, diseqc, ad->old_diseqc != diseqc,
+			            pol, hiband, &tp->diseqc_param);
 		else
-			LOGL(3,
-					"Skip sending diseqc commands since the switch position doesn't need to be changed: pol %d, hiband %d, switch position %d",
+			LOGL(3, "Skip sending diseqc commands since "
+			        "the switch position doesn't need to be changed: "
+			        "pol %d, hiband %d, switch position %d",
 					pol, hiband, diseqc);
 	}
 
-	tp->old_pol = pol;
-	tp->old_hiband = hiband;
-	tp->old_diseqc = diseqc;
+#ifdef AXE
+axe:
+	LOGL(3, "axe_fe: reset for fd %d adapter %d input %d", frontend_fd, ad ? ad->pa : -1, input);
+	if (axe_fe_reset(frontend_fd) < 0)
+		LOG("axe_fe: RESET failed for fd %d: %s", frontend_fd, strerror(errno));
+	if (axe_fe_input(frontend_fd, input))
+		LOG("axe_fe: INPUT failed for fd %d input %d: %s", frontend_fd, input, strerror(errno));
+	if (opts.quattro)
+		return freq;
+#endif
+
+	ad->old_pol = pol;
+	ad->old_hiband = hiband;
+	ad->old_diseqc = diseqc;
 
 	return freq;
 }
@@ -611,6 +738,14 @@ int dvb_tune(int aid, transponder * tp)
 	memset(p_cmd, 0, sizeof(p_cmd));
 	bclear = getTick();
 
+#ifdef AXE
+	ssize_t drv;
+	char buf[1316];
+	axe_set_tuner_led(aid + 1, 1);
+	axe_fe_reset(ad->fe);
+	do { drv = read(ad->dvr, buf, sizeof(buf)); } while (drv > 0);
+#endif
+
 	if ((ioctl(fd_frontend, FE_SET_PROPERTY, &cmdseq_clear)) == -1)
 	{
 		LOG("FE_SET_PROPERTY DTV_CLEAR failed for fd %d: %s", fd_frontend,
@@ -624,14 +759,16 @@ int dvb_tune(int aid, transponder * tp)
 	case SYS_DVBS2:
 
 		bpol = getTick();
-		freq = setup_switch(fd_frontend, tp);
+		freq = setup_switch(fd_frontend, ad, tp);
 		if (freq < MIN_FRQ_DVBS || freq > MAX_FRQ_DVBS)
 			LOG_AND_RETURN(-404, "Frequency %d is not within range ", freq)
 
 		ADD_PROP(DTV_SYMBOL_RATE, tp->sr)
 		ADD_PROP(DTV_INNER_FEC, tp->fec)
+#ifndef AXE
 		ADD_PROP(DTV_PILOT, tp->plts)
 		ADD_PROP(DTV_ROLLOFF, tp->ro)
+#endif
 #if DVBAPIVERSION >= 0x0502
 		ADD_PROP(DTV_STREAM_ID, tp->plp)
 #endif
@@ -640,7 +777,12 @@ int dvb_tune(int aid, transponder * tp)
 				"tuning to %d(%d) pol: %s (%d) sr:%d fec:%s delsys:%s mod:%s rolloff:%s pilot:%s, ts clear=%d, ts pol=%d",
 				tp->freq, freq, get_pol(tp->pol), tp->pol, tp->sr,
 				fe_fec[tp->fec], fe_delsys[tp->sys], fe_modulation[tp->mtype],
-				fe_rolloff[tp->ro], fe_pilot[tp->plts], bclear, bpol)
+#ifdef AXE
+				"auto", "auto",
+#else
+				fe_rolloff[tp->ro], fe_pilot[tp->plts],
+#endif
+				bclear, bpol)
 		break;
 
 	case SYS_DVBT:
@@ -741,29 +883,46 @@ int dvb_tune(int aid, transponder * tp)
 		if (ioctl(fd_frontend, FE_SET_PROPERTY, &p) == -1)
 		{
 			LOG("dvb_tune: set property failed %d %s", errno, strerror(errno));
+#ifdef AXE
+			axe_set_tuner_led(aid + 1, 0);
+#endif
 			return -404;
 		}
 
+#ifdef AXE
+	axe_dmxts_start(ad->dvr);
+#endif
+
 	return 0;
 }
 
 int dvb_set_pid(adapter *a, uint16_t i_pid)
 {
+#ifdef AXE
+	if (i_pid > 8192 || a == NULL)
+		LOG_AND_RETURN(-1, "pid %d > 8192 for ADAPTER %d", i_pid, a->id);
+	if (axe_dmxts_add_pid(a->dvr, i_pid) < 0)
+	{
+		LOG("failed setting filter on PID %d for ADAPTER %d (%s)", i_pid, a->id, strerror (errno));
+		return -1;
+	}
+	LOG("setting filter on PID %d for ADAPTER %d", i_pid, a->id);
+	return ((a->id + 1) << 16) | i_pid;
+#else
 	char buf[100];
 	int fd;
 	int hw, ad;
 
+	sprintf(buf, "/dev/dvb/adapter%d/demux%d", hw, ad);
+
 	hw = a->pa;
 	ad = a->fn;
 	if (i_pid > 8192)
-		LOG_AND_RETURN(-1, "pid %d > 8192 for /dev/dvb/adapter%d/demux%d",
-				i_pid, hw, ad);
+		LOG_AND_RETURN(-1, "pid %d > 8192 for %s", i_pid, buf);
 
-	sprintf(buf, "/dev/dvb/adapter%d/demux%d", hw, ad);
 	if ((fd = open(buf, O_RDWR | O_NONBLOCK)) < 0)
 	{
-		LOG("Could not open demux device /dev/dvb/adapter%d/demux%d: %s ", hw,
-				ad, strerror (errno));
+		LOG("Could not open demux device %s: %s ", buf, strerror (errno));
 		return -1;
 	}
 
@@ -789,10 +948,22 @@ int dvb_set_pid(adapter *a, uint16_t i_pid)
 	LOG("setting filter on PID %d for fd %d", i_pid, fd);
 
 	return fd;
+#endif
 }
 
 int dvb_del_filters(int fd, int pid)
 {
+#ifdef AXE
+	adapter *a = get_adapter((fd >> 16) - 1);
+	if (a == NULL)
+		return 0; /* closed */
+	if ((fd & 0xffff) != pid)
+		LOG_AND_RETURN(0, "AXE PID remove on an invalid handle %d, pid %d", fd, pid);
+	if (axe_dmxts_remove_pid(a->dvr, pid) < 0)
+		LOG("AXE PID remove failed on PID %d ADAPTER %d: %s", pid, a->pa, strerror (errno))
+	else
+		LOG("clearing filters on PID %d ADAPTER %d", pid, a->pa);
+#else
 	if (fd < 0)
 		LOG_AND_RETURN(0, "DMX_STOP on an invalid handle %d, pid %d", fd, pid);
 	if (ioctl(fd, DMX_STOP, NULL) < 0)
@@ -801,10 +972,20 @@ int dvb_del_filters(int fd, int pid)
 		LOG("clearing filter on PID %d FD %d", pid, fd);
 	close(fd);
 	return 0;
+#endif
 }
 
 fe_delivery_system_t dvb_delsys(int aid, int fd, fe_delivery_system_t *sys)
 {
+#ifdef AXE
+	int i;
+	LOG ("Delivery System DVB-S/DVB-S2 (AXE)");
+	for(i = 0 ; i < 10 ; i ++)
+		sys[i] = 0;
+	sys[0] = SYS_DVBS;
+	sys[1] = SYS_DVBS2;
+	return SYS_DVBS2;
+#else
 	int i, res, rv = 0;
 	struct dvb_frontend_info fe_info;
 
@@ -893,6 +1074,7 @@ fe_delivery_system_t dvb_delsys(int aid, int fd, fe_delivery_system_t *sys)
 				fe_delsys[sys[i]], sys[i]);
 
 	return (fe_delivery_system_t) rv;
+#endif
 
 }
 
@@ -1005,6 +1187,7 @@ void dvb_get_signal(adapter *ad)
 		ad->max_strength = (ad->strength > 0) ? ad->strength : 1;
 	if (ad->max_snr <= ad->snr)
 		ad->max_snr = (ad->snr > 0) ? ad->snr : 1;
+#ifndef AXE
 	if (ad->snr > 4096)
 		new_gs = 0;
 	if (new_gs)
@@ -1017,6 +1200,14 @@ void dvb_get_signal(adapter *ad)
 		ad->strength = ad->strength >> 8;
 		ad->snr = ad->snr >> 8;
 	}
+#else
+	ad->strength = ad->strength * 240 / 24000;
+	if (ad->strength > 240)
+		ad->strength = 240;
+	ad->snr = ad->snr * 15 / 54000;
+	if (ad->snr > 15)
+		ad->snr = 15;
+#endif
 }
 
 void dvb_commit(adapter *a)
@@ -1024,6 +1215,33 @@ void dvb_commit(adapter *a)
 	return;
 }
 
+int dvb_close(adapter *a2)
+{
+#ifdef AXE
+	adapter *c;
+	int aid, fe = a2->fe;
+	if (fe <= 0)
+		return;
+	axe_fe_reset(fe);
+	for (aid = 0; aid < 4; aid++)
+		if (aid != a2->id && a[aid]->sid_cnt > 0) break;
+	if (aid >= 4) {
+		LOG("AXE standby");
+		for (aid = 0; aid < 4; aid++) {
+			c = a[aid];
+			axe_fe_standby(c->fe, -1);
+			axe_set_tuner_led(aid + 1, 0);
+			ioctl(c->fe, FE_SET_VOLTAGE, SEC_VOLTAGE_OFF);
+			c->old_diseqc = c->old_pol = c->old_hiband = -1;
+		}
+	} else {
+		LOG("AXE standby: adapter %d busy (%d), keeping", aid, a[aid]->sid_cnt);
+	}
+	axe_set_tuner_led(a2->id + 1, 0);
+#endif
+	return 0;
+}
+
 void find_dvb_adapter(adapter **a)
 {
 	int na = 0;
@@ -1032,9 +1250,21 @@ void find_dvb_adapter(adapter **a)
 	int i = 0, j = 0;
 	adapter *ad;
 
+#ifdef AXE
+	axe_set_network_led(0);
+#endif
 	for (i = 0; i < MAX_ADAPTERS; i++)
 		for (j = 0; j < MAX_ADAPTERS; j++)
 		{
+#ifdef AXE
+			if (i < 4 && j == 0) {
+				axe_set_tuner_led(i + 1, 0);
+				sprintf(buf, "/dev/axe/frontend-%d", i);
+				fd = open(buf, O_RDONLY | O_NONBLOCK);
+			} else {
+				continue;
+			}
+#else
 			sprintf(buf, "/dev/dvb/adapter%d/frontend%d", i, j);
 			fd = open(buf, O_RDONLY | O_NONBLOCK);
 			if (fd < 0)
@@ -1042,7 +1272,8 @@ void find_dvb_adapter(adapter **a)
 				sprintf(buf, "/dev/dvb/adapter%d/ca%d", i, j);
 				fd = open(buf, O_RDONLY | O_NONBLOCK);
 			}
-			//LOG("testing device %s -> fd: %d",buf,fd);
+#endif
+			LOG("testing device %s -> fd: %d",buf,fd);
 			if (fd >= 0)
 			{
 //				if (is_adapter_disabled(na))
@@ -1051,7 +1282,7 @@ void find_dvb_adapter(adapter **a)
 //					continue;
 //				}
 				if (!a[na])
-					a[na] = malloc1(sizeof(adapter));
+					a[na] = adapter_alloc();
 
 				ad = a[na];
 				ad->pa = i;
@@ -1064,7 +1295,7 @@ void find_dvb_adapter(adapter **a)
 				ad->tune = (Tune) dvb_tune;
 				ad->delsys = (Dvb_delsys) dvb_delsys;
 				ad->post_init = NULL;
-				ad->close = NULL;
+				ad->close = (Adapter_commit) dvb_close;
 				ad->get_signal = (Device_signal) dvb_get_signal;
 				ad->type = ADAPTER_DVB;
 				close(fd);
@@ -1073,6 +1304,14 @@ void find_dvb_adapter(adapter **a)
 				if (na == MAX_ADAPTERS)
 					return;
 			}
+#ifdef AXE
+			else {
+				if (i < 4) {
+					LOGL(0, "AXE - cannot open %s: %i", buf, errno);
+					sleep(60);
+				}
+			}
+#endif
 		}
 	for (; na < MAX_ADAPTERS; na++)
 		if (a[na])
diff --git a/dvb.h b/dvb.h
index 0ab67a7..0f54e8e 100644
--- a/dvb.h
+++ b/dvb.h
@@ -165,6 +165,28 @@ typedef enum fe_modulation {
 #define MIN_FRQ_DVBS  950000
 #define MAX_FRQ_DVBS 2150000
 
+typedef struct diseqc
+{
+#define SWITCH_UNICABLE 1
+#define SWITCH_JESS 2
+#define SWITCH_SLAVE 3
+	int switch_type;
+	/* parameters */
+	int uslot; // unicable/jess slot
+	int ufreq; // unicable/jess frequency
+	int pin;
+	int only13v; // unicable - use 13V voltage only
+	int fast;    // don't send diseqc without position change
+	int committed_no, uncommitted_no; // diseqc info
+	/* timing */
+	int before_cmd;
+	int after_cmd;
+	int after_repeated_cmd;
+	int after_switch;
+	int after_burst;
+	int after_tone;
+} diseqc;
+
 typedef struct struct_transponder
 {
 	fe_delivery_system_t sys;
@@ -189,18 +211,8 @@ typedef struct struct_transponder
 	int pol;
 	int diseqc;
 
-#define SWITCH_UNICABLE 1
-#define SWITCH_JESS 2
-#define SWITCH_SLAVE 3
-	
-	int switch_type; // tuner type 
-	int uslot; // unicable/jess slot
-	int ufreq; // unicable/jess frequency
-	int pin;
-	int only13v; // use only 13V voltage
-	int committed_no, uncommitted_no; //diseqc informations
-	int old_pol, old_hiband, old_diseqc; // used to cache the diseqc position
-	
+	diseqc diseqc_param;
+
 	// DVB-C2
 	int c2tft;
 	int ds;
diff --git a/dvbapi.c b/dvbapi.c
index e832773..0bccd2e 100644
--- a/dvbapi.c
+++ b/dvbapi.c
@@ -991,25 +991,16 @@ void dvbapi_delete_keys_for_adapter(int aid)
 			keys_del(i);
 }
 
-SKey *k_tmp;
 _symbols dvbapi_sym[] =
 {
-{ "key_enabled", VAR_AARRAY_INT8, keys, 1, MAX_KEYS,
-		(long int) &k_tmp[0].enabled - (long int) &k_tmp[0] },
-{ "key_hops", VAR_AARRAY_INT8, keys, 1, MAX_KEYS, (long int) &k_tmp[0].hops
-		- (long int) &k_tmp[0] },
-{ "key_ecmtime", VAR_AARRAY_INT, keys, 1, MAX_KEYS, (long int) &k_tmp[0].ecmtime
-		- (long int) &k_tmp[0] },
-{ "key_pmt", VAR_AARRAY_INT, keys, 1, MAX_KEYS, (long int) &k_tmp[0].pmt_pid
-		- (long int) &k_tmp[0] },
-{ "key_cardsystem", VAR_AARRAY_PSTRING, keys, 1, MAX_KEYS,
-		(long int) &k_tmp[0].cardsystem - (long int) &k_tmp[0] },
-{ "key_reader", VAR_AARRAY_PSTRING, keys, 1, MAX_KEYS,
-		(long int) &k_tmp[0].reader - (long int) &k_tmp[0] },
-{ "key_from", VAR_AARRAY_PSTRING, keys, 1, MAX_KEYS, (long int) &k_tmp[0].from
-		- (long int) &k_tmp[0] },
-{ "key_protocol", VAR_AARRAY_PSTRING, keys, 1, MAX_KEYS,
-		(long int) &k_tmp[0].protocol - (long int) &k_tmp[0] },
+{ "key_enabled", VAR_AARRAY_INT8, keys, 1, MAX_KEYS, offsetof(SKey, enabled) },
+{ "key_hops", VAR_AARRAY_INT8, keys, 1, MAX_KEYS, offsetof(SKey, hops) },
+{ "key_ecmtime", VAR_AARRAY_INT, keys, 1, MAX_KEYS, offsetof(SKey, ecmtime) },
+{ "key_pmt", VAR_AARRAY_INT, keys, 1, MAX_KEYS, offsetof(SKey, pmt_pid) },
+{ "key_cardsystem", VAR_AARRAY_PSTRING, keys, 1, MAX_KEYS, offsetof(SKey, cardsystem) },
+{ "key_reader", VAR_AARRAY_PSTRING, keys, 1, MAX_KEYS, offsetof(SKey, reader) },
+{ "key_from", VAR_AARRAY_PSTRING, keys, 1, MAX_KEYS, offsetof(SKey, from) },
+{ "key_protocol", VAR_AARRAY_PSTRING, keys, 1, MAX_KEYS, offsetof(SKey, protocol) },
 
 { NULL, 0, NULL, 0, 0 } };
 
diff --git a/html/status.html b/html/status.html
index c4c91c0..5ec0d29 100644
--- a/html/status.html
+++ b/html/status.html
@@ -2,6 +2,33 @@
 <html>
 <head>
 <meta charset="utf-8"/>
+<style>
+.tright {
+  text-align: right;
+}
+.tcenter {
+  text-align: center;
+}
+.enabled {
+  color: green;
+}
+.disabled {
+  color: red;
+}
+table, th, td {
+  border: 1px solid black;
+}
+table {
+  border-collapse: collapse;
+}
+td.header {
+  width: 100px;
+  color: red;
+}
+td.row {
+  width: 100px;
+}
+</style>
 </head>
 <title>Minisatip/$version$ on $http_host$</title>
 <body onload="JavaScript:timedRefresh(5000);">
@@ -49,37 +76,37 @@ var max_adapters = 16;
 var max_streams = 64;
 var pol = ["", "(V)", "(H)", "(R)", "(L)"]
 var sys= [ "", "dvbc", "dvbcb", "dvbt", "dss", "dvbs", "dvbs2", "dvbh", "isdbt", "isdbs", "isdbc", "atsc", "atscmh", "dmbth", "cmmb", "dab", "dvbt2", "turbo", "dvbcc", "dvbc2" ]
-var myTable= "<table border='1'><tr><td style='width: 100px; color: red;'>Tuner</td>";
-    myTable+= "<td style='width: 100px; color: red; text-align: right;'>Status</td>";
-    myTable+="<td style='width: 100px; color: red; text-align: right;'>Frequency</td>";
-    myTable+="<td style='width: 100px; color: red; text-align: right;'>SR/BW</td>";
-    myTable+="<td style='width: 100px; color: red; text-align: right;'>Signal</td>";
-    myTable+="<td style='width: 100px; color: red; text-align: right;'>Streams</td>";
-    myTable+="<td style='width: 100px; color: red; text-align: right;'>Streams Pids</td></tr>";
+var myTable= "<table><tr><td class='header'>Tuner</td>";
+    myTable+="<td class='header tright'>Status</td>";
+    myTable+="<td class='header tright'>Frequency</td>";
+    myTable+="<td class='header tright'>SR/BW</td>";
+    myTable+="<td class='header tright'>Signal</td>";
+    myTable+="<td class='header tright'>Streams</td>";
+    myTable+="<td class='header tright'>Streams Pids</td></tr>";
 
   for (var i=0; i<max_adapters; i++) {
 	if(ad_type[i] == 0)
 		continue;
-    myTable+="<tr><td style='width: 100px;'>" + i + "</td>";
+    myTable+="<tr><td class='row'>" + i + "</td>";
 	var csys = "";
 	if(ad_sys[i] == 0)
 		csys = ad_allsys[i];
 	else
 		csys = sys[ad_sys[i]];
 	if(ad_enabled[i] == 1)
-		myTable+="<td style='width: 100px; text-align: right; color: green;' title='pids="+ad_pids[i]+"'>" + csys;
+		myTable+="<td class='row tright enabled' title='pids="+ad_pids[i]+"'>" + csys;
 	else
-		myTable+="<td style='width: 100px; text-align: right; color: red;' >" + ad_allsys[i];
+		myTable+="<td class='row tright disabled'>" + ad_allsys[i];
 	if(ad_type[i] == 1){
 		myTable+="(" + ad_phyad[i] + "," + ad_phyfd[i] +") </td>";
 	}else{ 
 		myTable+="(" + ad_satip[i] + ")</td>";
 	}
-    myTable+="<td style='width: 100px; text-align: right;' >" + ad_freq[i] + ""+pol[ad_pol[i]]+"</td>";
+    myTable+="<td class='row tright'>" + ad_freq[i] + ""+pol[ad_pol[i]]+"</td>";
 	if(ad_sys[i] == 0 || ad_sys[i] == 1 || ad_sys[i] == 2 || ad_sys[i] == 5 || ad_sys[i] == 6 || ad_sys[i] == 18 || ad_sys[i] == 19 )
-		myTable+="<td style='width: 100px;text-align: right;'>" + ad_sr[i] + "</td>";
+		myTable+="<td class='row tright'>" + ad_sr[i] + "</td>";
 	else 
-		myTable+="<td style='width: 100px;text-align: right;'>" + ad_bw[i]/1000 + "MHZ</td>";
+		myTable+="<td class='row tright'>" + ad_bw[i]/1000 + "MHZ</td>";
 
 	var signal = "";
 	if(ad_enabled[i] == 0)
@@ -97,9 +124,9 @@ var myTable= "<table border='1'><tr><td style='width: 100px; color: red;'>Tuner<
 		if(ad_ber[i] > 0)
 			signal += " BER "+ad_ber[i];
 	}	
-	myTable+="<td style='width: 100px;text-align: right;'>" + signal + " </td>";
+	myTable+="<td class='row tright'>" + signal + " </td>";
 
-	myTable +="<td style='width: 100px;text-align: center;'>";
+	myTable +="<td class='row tright'>";
 	for(var j=0;j<max_streams;j++)
 		if(st_enabled[j]==1 && st_adapter[j]==i)
 		{
@@ -111,7 +138,7 @@ var myTable= "<table border='1'><tr><td style='width: 100px; color: red;'>Tuner<
 			myTable += st_rh+"("+st_useragent[j]+")<br>";
 		}
 	
-	myTable +="</td><td style='width: 100px;text-align: center;'>";
+	myTable +="</td><td class='row tcenter'>";
 
 	for(var j=0;j<max_streams;j++)
 		if(st_enabled[j]==1 && st_adapter[j]==i)
diff --git a/minisatip.c b/minisatip.c
index d6b26d3..b26be53 100644
--- a/minisatip.c
+++ b/minisatip.c
@@ -66,6 +66,7 @@ static const struct option long_options[] =
 { "unicable", required_argument, NULL, 'u' },
 { "jess", required_argument, NULL, 'j' },
 { "diseqc", required_argument, NULL, 'd' },
+{ "diseqc-timing", required_argument, NULL, 'q' },
 #ifndef DISABLE_DVBCSA
 		{ "dvbapi", required_argument, NULL, 'o' },
 #endif
@@ -86,6 +87,12 @@ static const struct option long_options[] =
 		{ "xml", required_argument, NULL, 'X' },
 		{ "help", no_argument, NULL, 'h' },
 		{ "version", no_argument, NULL, 'V' },
+#ifdef AXE
+		{ "link_adapters", required_argument, NULL, 'L' },
+		{ "quattro", required_argument, NULL, 'Q' },
+		{ "axe-uinput", required_argument, NULL, 'U' },
+		{ "skip-mpegts", required_argument, NULL, 'M' },
+#endif
 		{ 0, 0, 0, 0 } };
 
 #define RRTP_OPT 'r'
@@ -105,6 +112,7 @@ static const struct option long_options[] =
 #define UNICABLE_OPT 'u'
 #define JESS_OPT 'j'
 #define DISEQC_OPT 'd'
+#define DISEQC_TIMING_OPT 'q'
 #define SLAVE_OPT 'S'
 #define DELSYS_OPT 'Y'
 #define DVBAPI_OPT 'o'
@@ -117,12 +125,20 @@ static const struct option long_options[] =
 #define DOCUMENTROOT_OPT 'R'
 #define XML_OPT 'X'
 #define THREADS_OPT 'T'
+#define LINK_OPT 'L'
+#define QUATTRO_OPT 'Q'
+#define AXE_UNICINP_OPT 'U'
+#define AXE_SKIP_PKT 'M'
+
 
 void print_version(int use_log)
 {
 	char buf[200];
-	sprintf(buf, "%s version %s, compiled with s2api version: %04X", app_name,
-			version, LOGDVBAPIVERSION);
+	sprintf(buf, "%s version %s, compiled with s2api version: %04X"
+#ifdef AXE
+		     " (AXE)"
+#endif
+			, app_name, version, LOGDVBAPIVERSION);
 	if (!use_log)
 		puts(buf);
 	else
@@ -133,10 +149,19 @@ void usage()
 {
 	print_version(0);
 	printf(
-			"\n\t./%s [-[fgltz]] [-a x:y:z] [-b X:Y] [-c X] [-d A:C-U ] [-D device_id] [-e X-Y,Z] [-i prio] \n\
-	\t[-j A1:S1-F1[-PIN]] [-m mac] [-o oscam_host:dvbapi_port] [-p public_host] [-r remote_rtp_host] \n\
-	\t[-R document_root] [-s [DELSYS:]host[:port] [-u A1:S1-F1[-PIN]] [-w http_server[:port]] \n\
-	\t[-x http_port] [-X xml_path] [-y rtsp_port] \n\n\
+			"\n\t./%s [-[fgltzQ]] [-a x:y:z] [-b X:Y] [-c X] [-d A:C-U ] [-D device_id] [-e X-Y,Z] [-i prio] \n\
+	\t[-j A1:S1-F1[-PIN]] [-m mac] "
+#ifndef DISABLE_DVBCSA
+				      "[-o oscam_host:dvbapi_port] "
+#endif
+				      				  "[-p public_host] [-r remote_rtp_host] \n\
+	\t[-R document_root] "
+#ifndef DISABLE_SATIPCLIENT
+			    "[-s [DELSYS:]host[:port] "
+#endif
+						     "[-u A1:S1-F1[-PIN]] [-w http_server[:port]] \n\
+	\t[-x http_port] [-X xml_path] [-y rtsp_port] [-L M1:S1[,M2:S2]] [-U unicable_adapter] \n\
+	\t[-M mpegts_packets]\n\n\
 Help\n\
 -------\n\
 \n\
@@ -150,10 +175,16 @@ Help\n\
 * -c X: bandwidth capping for the output to the network [default: unlimited]\n\
 	* eg: -c 2048  (does not allow minisatip to send more than 2048KB/s to all remote servers)\n\
 \n\
-* -d --diseqc ADAPTER1:COMMITED1-UNCOMMITED1[,ADAPTER2:COMMITED2-UNCOMMITED2[,...]\n\
-\t* The first argument is the adapter number, second is the number of commited packets to send to a Diseqc 1.0 switch, third the number of uncommited commands to sent to a Diseqc 1.1 switch\n\
-\tThe higher number between the commited and uncommited will be sent first.\n\
-	eg: -d 0:1-0  (which is the default for each adapter).\n\
+* -d --diseqc ADAPTER1:COMMITTED1-UNCOMMITTED1[,ADAPTER2:COMMITTED2-UNCOMMITTED2[,...]\n\
+\t* The first argument is the adapter number, second is the number of committed packets to send to a Diseqc 1.0 switch, third the number of uncommitted commands to sent to a Diseqc 1.1 switch\n\
+\tThe higher number between the committed and uncommitted will be sent first.\n\
+	* eg: -d 0:1-0  (which is the default for each adapter).\n\
+	- note: * as adapter means apply to all adapters\n\
+	- note: * before committed number enables fast-switch (only voltage/tone)\n\
+\n\
+* -q --diseqc-timing ADAPTER1:BEFORE_CMD1-AFTER_CMD1-AFTER_REPEATED_CMD1-BEFORE_BURST1-BEFORE_TONE1-FINAL1[,...]\n\
+\t* All timing values are in ms, default adapter values are: 15-54-15-15-15-0\n\
+	- note: * as adapter means apply to all adapters\n\
 \n\
 * -D --device-id DVC_ID: specify the device id (in case there are multiple SAT>IP servers in the network)\n \
 	* eg: -D 4 \n\
@@ -179,13 +210,23 @@ Help\n\
 * -m xx: simulate xx as local mac address, generates UUID based on mac\n\
 	* eg: -m 001122334455 \n\
 \n\
+"
+#ifndef DISABLE_NETCVCLIENT
+"\
 * -n --netceiver if:count: use network interface <if> (default vlan4) and look for <count> netceivers\n\
 	* eg: -n vlan4:2 \n\
 \n\
+"
+#endif
+#ifndef DISABLE_DVBCSA
+"\
 * -o --dvbapi host:port - specify the hostname and port for the dvbapi server (oscam) \n\
 	* eg: -o 192.168.9.9:9000 \n\
 	192.168.9.9 is the host where oscam is running and 9000 is the port configured in dvbapi section in oscam.conf\n\
 \n\
+"
+#endif
+"\
 * -p url: specify playlist url using X_SATIPM3U header \n\
 	* eg: -p http://192.168.2.3:8080/playlist\n\
 	- this will add X_SATIPM3U tag into the satip description xml\n\
@@ -195,6 +236,9 @@ Help\n\
 \n\
 * -R --document-root directory: document root for the minisatip web page and images\n\
 \n\
+"
+#ifndef DISABLE_SATIPCLIENT
+"\
 * -s --satip-servers DELSYS:host:port - specify the remote satip host and port with delivery system DELSYS, it is possible to use multiple -s \n\
 	* DELSYS - can be one of: dvbs, dvbs2, dvbt, dvbt2, dvbc, dvbc2, isdbt, atsc, dvbcb ( - DVBC_ANNEX_B ) [default: dvbs2]\n\
 	host - the server of the satip server\n\
@@ -204,6 +248,9 @@ Help\n\
 	- specifies 1 dvbt satip server  with address 192.168.1.3:554\n\
 	- specifies 1 dvbc satip server  with address 192.168.1.4:554\n\
 \n\
+"
+#endif
+"\
 * -S --slave ADAPTER1,ADAPTER2-ADAPTER4[,..] - specify slave adapters	\n\
 	* Allows specifying bonded adapters (multiple adapters connected with a splitter to the same LNB)\n\
 	Only one adapter needs to be master all others needs to have this parameter specified\n\
@@ -237,7 +284,26 @@ Help\n\
 	* eg: -y 5544 \n\
 	- changing this to a port > 1024 removes the requirement for minisatip to run as root\n\
 \n\
-",
+* -L --link-adapters mapping_string: link adapters (identical src,lo/hi,h/v)\n\
+\t* The format is: M1:S1[,[M2:S2]] - master:slave\n\
+	* eg: 0:1,0:2,0:3 \n\
+\n\
+"
+#ifdef AXE
+"\
+* -L --link-adapters mapping_string: link adapters (identical src,lo/hi,h/v)\n\
+\t* The format is: M1:S1[,M2:S2] - master:slave\n\
+	* eg: 0:1,0:2,0:3 \n\
+\n\
+* -Q --quattro  quattro LNB config (H/H,H/V,L/H,L/V)\n\
+\n\
+* -U --axe-uinput adapterno: AXE unicable/jess input (0-3)\n\
+\n\
+* -M --skip-mpegts packets: skip initial MPEG-TS packets for AXE demuxer (default 35)\n\
+\n\
+"
+#endif
+,
 			app_name,
 			ADAPTER_BUFFER,
 			DVR_BUFFER, opts.no_threads ? "DISABLED" : "ENABLED");
@@ -277,17 +343,24 @@ void set_options(int argc, char *argv[])
 	opts.satip_setup_pids = 0;
 	opts.output_buffer = 512 * 1024;
 	opts.satip_servers[0] = 0;
-	opts.document_root = "html";
+	opts.document_root = "/usr/share/minisatip/html";
 	opts.xml_path = DESC_XML;
 	opts.no_threads = 0;
 	opts.th_priority = -1;
+	opts.diseqc_before_cmd = 15;
+	opts.diseqc_after_cmd = 54;
+	opts.diseqc_after_repeated_cmd = 15;
+	opts.diseqc_after_switch = 15;
+	opts.diseqc_after_burst = 15;
+	opts.diseqc_after_tone = 0;
 #ifdef __mips__
 	opts.no_threads = 1;
 #endif
+	opts.axe_skippkt = 35;
 	memset(opts.playlist, 0, sizeof(opts.playlist));
 
 	while ((opt = getopt_long(argc, argv,
-			"flr:a:td:w:p:s:n:hc:b:m:p:e:x:u:j:o:gy:i:D:VR:S:TX:Y:",
+			"flr:a:td:w:p:s:n:hc:b:m:p:e:x:u:j:o:gy:i:q:D:VR:S:TX:Y:L:QU:M:",
 			long_options, NULL)) != -1)
 	{
 		//              printf("options %d %c %s\n",opt,opt,optarg);
@@ -359,9 +432,12 @@ void set_options(int argc, char *argv[])
 			opts.adapter_buffer = (opts.adapter_buffer / 188) * 188;
 			if (opts.adapter_buffer < ADAPTER_BUFFER)
 				opts.adapter_buffer = ADAPTER_BUFFER;
+#ifdef AXE
+			opts.dvr_buffer += 7*188 - 1;
+			opts.dvr_buffer -= opts.dvr_buffer % (7*188);
+#endif
 			if (opts.dvr_buffer == 0)
 				opts.dvr_buffer = DVR_BUFFER;
-
 			break;
 		}
 
@@ -410,6 +486,12 @@ void set_options(int argc, char *argv[])
 			break;
 		}
 
+		case DISEQC_TIMING_OPT:
+		{
+			set_diseqc_timing(optarg);
+			break;
+		}
+
 		case SLAVE_OPT:
 		{
 			set_slave_adapters(optarg);
@@ -508,6 +590,33 @@ void set_options(int argc, char *argv[])
 				LOGL(0, "Not a valid path for the xml file")
 			;
 			break;
+#ifdef AXE
+		case LINK_OPT:
+			set_link_adapters(optarg);
+                        break;
+
+		case QUATTRO_OPT:
+			opts.quattro = 1;
+                        break;
+
+		case AXE_UNICINP_OPT:
+			opts.axe_unicinp = atoi(optarg);
+                        if (opts.axe_unicinp < 0 || opts.axe_unicinp > 3) {
+                        	LOG("unicable input %d out of range, using 0", opts.axe_unicinp);
+                                opts.axe_unicinp = 0;
+                        }
+                        break;
+
+		case AXE_SKIP_PKT:
+		{
+			opts.axe_skippkt = atoi(optarg);
+			if (opts.axe_skippkt < 0)
+				opts.axe_skippkt = 0;
+			if (opts.axe_skippkt > 200)
+				opts.axe_skippkt = 200;
+			break;
+		}
+#endif
 		}
 
 	}
@@ -676,7 +785,6 @@ int read_rtsp(sockets * s)
 		if (transport)
 		{
 			int s_timeout;
-
 			if (sid->timeout == 1)
 				sid->timeout = opts.timeout_sec;
 
@@ -1003,6 +1111,9 @@ int ssdp_reply(sockets * s)
 		return 0;
 	}
 
+#ifdef AXE
+	axe_set_network_led(1);
+#endif
 // not my uuid
 	LOG("Received SSDP packet from %s:%d -> handle %d",
 			get_socket_rhost(s->id, ra, sizeof(ra)), get_socket_rport(s->id),
@@ -1138,7 +1249,11 @@ int main(int argc, char *argv[])
 
 	if (!opts.no_threads)
 		set_socket_thread(sock_signal, start_new_thread("signal"));
+#ifdef AXE
+	sockets_timeout(sock_signal, 400);
+#else
 	sockets_timeout(sock_signal, 1000);
+#endif
 
 	if (0 > (sock_bw = sockets_add(SOCK_TIMEOUT, NULL, -1, TYPE_UDP, NULL,
 	NULL, (socket_action) calculate_bw)))
diff --git a/minisatip.h b/minisatip.h
old mode 100644
new mode 100755
index 403af34..3cd6977
--- a/minisatip.h
+++ b/minisatip.h
@@ -10,13 +10,15 @@
 
 #define VERSION_BUILD "26"
 #define CC(a,b,c) #a b #c
-#define VERSION CC(0.5.,VERSION_BUILD,)
+#define VERSION CC(0.5.,VERSION_BUILD,-axe101)
 
 void set_options (int argc, char *argv[]);
 
 extern char pid_file[];
 extern char app_name[], version[];
 
+#define offsetof(st, m) __builtin_offsetof(st, m)
+
 #define copy32(a,i,v) { a[i] = ((v)>>24) & 0xFF;\
 			a[i+1] = ((v)>>16) & 0xFF;\
 			a[i+2] = ((v)>>8) & 0xFF;\
@@ -48,6 +50,9 @@ struct struct_opts
 	int force_scan;
 	int clean_psi;
 	int file_line;
+	int quattro;
+	int axe_unicinp;
+	int axe_skippkt;
 	char *last_log;	
 	int dvbapi_port;
 	char *dvbapi_host;
@@ -62,6 +67,15 @@ struct struct_opts
 	char *xml_path;
 	char no_threads;
 	int th_priority;
+	int diseqc_fast;
+	int diseqc_committed_no;
+	int diseqc_uncommitted_no;
+	int diseqc_before_cmd;
+	int diseqc_after_cmd;
+	int diseqc_after_repeated_cmd;
+	int diseqc_after_switch;
+	int diseqc_after_burst;
+	int diseqc_after_tone;
 };
 
 
diff --git a/netceiver.c b/netceiver.c
index e42023e..51ef642 100644
--- a/netceiver.c
+++ b/netceiver.c
@@ -457,7 +457,7 @@ void find_netcv_adapter(adapter **a)
 		if (na >= MAX_ADAPTERS)
 			break;
 		if (!a[na])
-			a[na] = malloc1(sizeof(adapter));
+			a[na] = adapter_alloc();
 		if (!sn[na])
 			sn[na] = malloc1(sizeof(SNetceiver));
 
diff --git a/satipc.c b/satipc.c
index 4fd5972..af3e8aa 100644
--- a/satipc.c
+++ b/satipc.c
@@ -831,13 +831,16 @@ void find_satip_adapter(adapter **a)
 		return;
 	la = split(arg, opts.satip_servers, 50, ',');
 	j = 0;
+	for (i = 0; i < MAX_ADAPTERS; i++) {
+		
+	}
 	for (i = a_count; i < MAX_ADAPTERS; i++)
 		if (j < la)
 		{
 			if (is_adapter_disabled(i))
 				continue;
 			if (!a[i])
-				a[i] = malloc1(sizeof(adapter));
+				a[i] = adapter_alloc();
 			if(!satip[i])
 				satip[i] = malloc1(sizeof(satipc));
 			sip = satip[i];
@@ -913,8 +916,7 @@ void find_satip_adapter(adapter **a)
 }
 
 
-satipc *sip_tmp;
 _symbols satipc_sym[] ={
-{ "ad_satip", VAR_AARRAY_PSTRING, a, 1, MAX_ADAPTERS, (long int) &sip_tmp[0].sip
-		- (long int) &sip_tmp[0] }
+{ "ad_satip", VAR_AARRAY_PSTRING, satip, 1, MAX_ADAPTERS, offsetof(satipc, sip) },
+{ NULL, 0, NULL, 0, 0 }
 };
diff --git a/socketworks.c b/socketworks.c
index 4c91a40..192182f 100644
--- a/socketworks.c
+++ b/socketworks.c
@@ -431,6 +431,7 @@ int sockets_add(int sock, struct sockaddr_in *sa, int sid, int type,
 		max_sock = i + 1;
 	ss->buf = NULL;
 	ss->lbuf = 0;
+	ss->skiplen = type == TYPE_DVR ? opts.axe_skippkt * 188 : 0;
 	ss->close_sec = 0;
 	ss->id = i;
 	ss->read = (read_action) sockets_read;
@@ -624,6 +625,29 @@ void *select_and_execute(void *arg)
 						ss->rlen += rlen;
 					else
 						ss->rlen = 0;
+#ifdef AXE
+					if (ss->type == TYPE_DVR) {
+						while (rlen > 0 && ss->lbuf - ss->rlen >= 1316) {
+							rlen = read (ss->sock, &ss->buf[ss->rlen], ss->lbuf - ss->rlen);
+							if (rlen > 0)
+								ss->rlen += rlen;
+						}
+						if (rlen == 0 || (rlen < 0 || errno == -EAGAIN))
+							read_ok = 1;
+						if (ss->skiplen > 0 && ss->rlen > 0) {
+							LOG("AXE skip: before rlen %d skiplen %d", ss->rlen, ss->skiplen);
+							if (ss->skiplen >= ss->rlen) {
+								ss->skiplen -= ss->rlen;
+								ss->rlen = 0;
+							} else {
+								memmove(ss->buf, &ss->buf[ss->skiplen], ss->rlen - ss->skiplen);
+								ss->rlen = ss->rlen - ss->skiplen;
+								ss->skiplen = 0;
+							}
+							LOG("AXE skip: after rlen %d skiplen %d", ss->rlen, ss->skiplen);
+						}
+					}
+#endif
 					//force 0 at the end of the string
 					if (ss->lbuf >= ss->rlen)
 						ss->buf[ss->rlen] = 0;
@@ -935,6 +959,14 @@ void set_socket_pos(int sock, int pos)
 	ss->rlen = pos;
 }
 
+void set_socket_skip(int sock)
+{
+	sockets *ss = get_sockets(sock);
+	if (!ss)
+		return;
+	ss->skiplen = opts.axe_skippkt * 188;
+}
+
 char *get_socket_rhost(int s_id, char *dest, int ld)
 {
 	sockets *ss = get_sockets(s_id);
diff --git a/socketworks.h b/socketworks.h
old mode 100644
new mode 100755
index c852e2a..aa4157c
--- a/socketworks.h
+++ b/socketworks.h
@@ -23,6 +23,7 @@ typedef struct struct_sockets {
 	unsigned char *buf;
 	int lbuf;
 	int rlen;
+	int skiplen;
 	int close_sec;
 	int id;				 // socket id
 	int err;
@@ -72,6 +73,7 @@ void set_socket_send_buffer(int sock, int len);
 void set_socket_receive_buffer(int sock, int len);
 sockets *get_sockets(int i);
 void set_socket_pos(int sock, int pos);
+void set_socket_skip(int sock);
 char *get_socket_rhost(int s_id, char *dest, int ld);
 int get_socket_rport(int s_id);
 void set_sock_lock(int i, SMutex *m);
diff --git a/stream.c b/stream.c
index 03fee8a..8a45437 100644
--- a/stream.c
+++ b/stream.c
@@ -277,7 +277,7 @@ int start_play(streams * sid, sockets * s)
 					"Tune requested with no real parameters, ignoring ...");
 		}
 		a_id = get_free_adapter(sid->tp.freq, sid->tp.pol, sid->tp.sys,
-				sid->tp.fe);
+				sid->tp.fe, sid->tp.diseqc);
 		LOG("Got adapter %d on socket %d", a_id, s->id);
 		if (a_id < 0)
 			return -404;
@@ -1293,17 +1293,12 @@ char* get_stream_pids(int s_id, char *dest, int max_size)
 	return dest;
 }
 
-streams *s_tmp;
 _symbols stream_sym[] =
 {
-{ "st_enabled", VAR_AARRAY_INT8, st, 1, MAX_STREAMS,
-		(long int) &s_tmp[0].enabled - (long int) &s_tmp[0] },
-{ "st_play", VAR_AARRAY_INT, st, 1, MAX_STREAMS, (long int) &s_tmp[0].do_play
-		- (long int) &s_tmp[0] },
-{ "st_adapter", VAR_AARRAY_INT, st, 1, MAX_STREAMS, (long int) &s_tmp[0].adapter
-		- (long int) &s_tmp[0] },
-{ "st_useragent", VAR_AARRAY_STRING, st, 1, MAX_STREAMS,
-		(long int) &s_tmp[0].useragent - (long int) &s_tmp[0] },
+{ "st_enabled", VAR_AARRAY_INT8, st, 1, MAX_STREAMS, offsetof(streams, enabled) },
+{ "st_play", VAR_AARRAY_INT, st, 1, MAX_STREAMS, offsetof(streams, do_play) },
+{ "st_adapter", VAR_AARRAY_INT, st, 1, MAX_STREAMS, offsetof(streams, adapter) },
+{ "st_useragent", VAR_AARRAY_STRING, st, 1, MAX_STREAMS, offsetof(streams, useragent) },
 { "st_rhost", VAR_FUNCTION_STRING, (void *) &get_stream_rhost, 0, 0, 0 },
 { "st_rport", VAR_FUNCTION_INT, (void *) &get_stream_rport, 0, 0, 0 },
 { "st_pids", VAR_FUNCTION_STRING, (void *) &get_stream_pids, 0, 0, 0 },
diff --git a/utils.c b/utils.c
index eaa0317..8cb7c49 100644
--- a/utils.c
+++ b/utils.c
@@ -36,6 +36,8 @@
 #include <sys/socket.h>
 #include <sys/ioctl.h>
 #include <sys/stat.h>
+#include <sys/syscall.h>
+#include <sys/resource.h>
 #include <net/if.h>
 #include <fcntl.h>
 #include <ctype.h>
@@ -1141,6 +1143,7 @@ pthread_t start_new_thread(char *name)
 
 void set_thread_prio(pthread_t tid, int prio)
 {
+#if 0
 	int rv;
 	struct sched_param param;
 	memset( &param, 0, sizeof(struct sched_param) );
@@ -1148,6 +1151,12 @@ void set_thread_prio(pthread_t tid, int prio)
 	if ( (rv = pthread_setschedparam( pthread_self(), SCHED_RR, &param )) )
 		LOG("pthread_setschedparam failed with error %d", rv);
 	return;
+#else
+	pid_t xtid;
+	xtid = syscall(SYS_gettid);
+	if (setpriority(PRIO_PROCESS, xtid, prio))
+		LOG("setpriority(%d) failed with error %d", prio, errno);
+#endif
 }