satip-axe/kernel/drivers/acpi/acpica/rsmisc.c
2015-03-26 17:24:57 +01:00

562 lines
14 KiB
C

/*******************************************************************************
*
* Module Name: rsmisc - Miscellaneous resource descriptors
*
******************************************************************************/
/*
* Copyright (C) 2000 - 2008, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include <acpi/acpi.h>
#include "accommon.h"
#include "acresrc.h"
#define _COMPONENT ACPI_RESOURCES
ACPI_MODULE_NAME("rsmisc")
#define INIT_RESOURCE_TYPE(i) i->resource_offset
#define INIT_RESOURCE_LENGTH(i) i->aml_offset
#define INIT_TABLE_LENGTH(i) i->value
#define COMPARE_OPCODE(i) i->resource_offset
#define COMPARE_TARGET(i) i->aml_offset
#define COMPARE_VALUE(i) i->value
/*******************************************************************************
*
* FUNCTION: acpi_rs_convert_aml_to_resource
*
* PARAMETERS: Resource - Pointer to the resource descriptor
* Aml - Where the AML descriptor is returned
* Info - Pointer to appropriate conversion table
*
* RETURN: Status
*
* DESCRIPTION: Convert an external AML resource descriptor to the corresponding
* internal resource descriptor
*
******************************************************************************/
acpi_status
acpi_rs_convert_aml_to_resource(struct acpi_resource *resource,
union aml_resource *aml,
struct acpi_rsconvert_info *info)
{
acpi_rs_length aml_resource_length;
void *source;
void *destination;
char *target;
u8 count;
u8 flags_mode = FALSE;
u16 item_count = 0;
u16 temp16 = 0;
ACPI_FUNCTION_TRACE(rs_convert_aml_to_resource);
if (((acpi_size) resource) & 0x3) {
/* Each internal resource struct is expected to be 32-bit aligned */
ACPI_WARNING((AE_INFO,
"Misaligned resource pointer (get): %p Type %2.2X Len %X",
resource, resource->type, resource->length));
}
/* Extract the resource Length field (does not include header length) */
aml_resource_length = acpi_ut_get_resource_length(aml);
/*
* First table entry must be ACPI_RSC_INITxxx and must contain the
* table length (# of table entries)
*/
count = INIT_TABLE_LENGTH(info);
while (count) {
/*
* Source is the external AML byte stream buffer,
* destination is the internal resource descriptor
*/
source = ACPI_ADD_PTR(void, aml, info->aml_offset);
destination =
ACPI_ADD_PTR(void, resource, info->resource_offset);
switch (info->opcode) {
case ACPI_RSC_INITGET:
/*
* Get the resource type and the initial (minimum) length
*/
ACPI_MEMSET(resource, 0, INIT_RESOURCE_LENGTH(info));
resource->type = INIT_RESOURCE_TYPE(info);
resource->length = INIT_RESOURCE_LENGTH(info);
break;
case ACPI_RSC_INITSET:
break;
case ACPI_RSC_FLAGINIT:
flags_mode = TRUE;
break;
case ACPI_RSC_1BITFLAG:
/*
* Mask and shift the flag bit
*/
ACPI_SET8(destination) = (u8)
((ACPI_GET8(source) >> info->value) & 0x01);
break;
case ACPI_RSC_2BITFLAG:
/*
* Mask and shift the flag bits
*/
ACPI_SET8(destination) = (u8)
((ACPI_GET8(source) >> info->value) & 0x03);
break;
case ACPI_RSC_COUNT:
item_count = ACPI_GET8(source);
ACPI_SET8(destination) = (u8) item_count;
resource->length = resource->length +
(info->value * (item_count - 1));
break;
case ACPI_RSC_COUNT16:
item_count = aml_resource_length;
ACPI_SET16(destination) = item_count;
resource->length = resource->length +
(info->value * (item_count - 1));
break;
case ACPI_RSC_LENGTH:
resource->length = resource->length + info->value;
break;
case ACPI_RSC_MOVE8:
case ACPI_RSC_MOVE16:
case ACPI_RSC_MOVE32:
case ACPI_RSC_MOVE64:
/*
* Raw data move. Use the Info value field unless item_count has
* been previously initialized via a COUNT opcode
*/
if (info->value) {
item_count = info->value;
}
acpi_rs_move_data(destination, source, item_count,
info->opcode);
break;
case ACPI_RSC_SET8:
ACPI_MEMSET(destination, info->aml_offset, info->value);
break;
case ACPI_RSC_DATA8:
target = ACPI_ADD_PTR(char, resource, info->value);
ACPI_MEMCPY(destination, source, ACPI_GET16(target));
break;
case ACPI_RSC_ADDRESS:
/*
* Common handler for address descriptor flags
*/
if (!acpi_rs_get_address_common(resource, aml)) {
return_ACPI_STATUS
(AE_AML_INVALID_RESOURCE_TYPE);
}
break;
case ACPI_RSC_SOURCE:
/*
* Optional resource_source (Index and String)
*/
resource->length +=
acpi_rs_get_resource_source(aml_resource_length,
info->value,
destination, aml, NULL);
break;
case ACPI_RSC_SOURCEX:
/*
* Optional resource_source (Index and String). This is the more
* complicated case used by the Interrupt() macro
*/
target =
ACPI_ADD_PTR(char, resource,
info->aml_offset + (item_count * 4));
resource->length +=
acpi_rs_get_resource_source(aml_resource_length,
(acpi_rs_length) (((item_count - 1) * sizeof(u32)) + info->value), destination, aml, target);
break;
case ACPI_RSC_BITMASK:
/*
* 8-bit encoded bitmask (DMA macro)
*/
item_count =
acpi_rs_decode_bitmask(ACPI_GET8(source),
destination);
if (item_count) {
resource->length += (item_count - 1);
}
target = ACPI_ADD_PTR(char, resource, info->value);
ACPI_SET8(target) = (u8) item_count;
break;
case ACPI_RSC_BITMASK16:
/*
* 16-bit encoded bitmask (IRQ macro)
*/
ACPI_MOVE_16_TO_16(&temp16, source);
item_count =
acpi_rs_decode_bitmask(temp16, destination);
if (item_count) {
resource->length += (item_count - 1);
}
target = ACPI_ADD_PTR(char, resource, info->value);
ACPI_SET8(target) = (u8) item_count;
break;
case ACPI_RSC_EXIT_NE:
/*
* Control - Exit conversion if not equal
*/
switch (info->resource_offset) {
case ACPI_RSC_COMPARE_AML_LENGTH:
if (aml_resource_length != info->value) {
goto exit;
}
break;
case ACPI_RSC_COMPARE_VALUE:
if (ACPI_GET8(source) != info->value) {
goto exit;
}
break;
default:
ACPI_ERROR((AE_INFO,
"Invalid conversion sub-opcode"));
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
break;
default:
ACPI_ERROR((AE_INFO, "Invalid conversion opcode"));
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
count--;
info++;
}
exit:
if (!flags_mode) {
/* Round the resource struct length up to the next boundary (32 or 64) */
resource->length =
(u32) ACPI_ROUND_UP_TO_NATIVE_WORD(resource->length);
}
return_ACPI_STATUS(AE_OK);
}
/*******************************************************************************
*
* FUNCTION: acpi_rs_convert_resource_to_aml
*
* PARAMETERS: Resource - Pointer to the resource descriptor
* Aml - Where the AML descriptor is returned
* Info - Pointer to appropriate conversion table
*
* RETURN: Status
*
* DESCRIPTION: Convert an internal resource descriptor to the corresponding
* external AML resource descriptor.
*
******************************************************************************/
acpi_status
acpi_rs_convert_resource_to_aml(struct acpi_resource *resource,
union aml_resource *aml,
struct acpi_rsconvert_info *info)
{
void *source = NULL;
void *destination;
acpi_rsdesc_size aml_length = 0;
u8 count;
u16 temp16 = 0;
u16 item_count = 0;
ACPI_FUNCTION_TRACE(rs_convert_resource_to_aml);
/*
* First table entry must be ACPI_RSC_INITxxx and must contain the
* table length (# of table entries)
*/
count = INIT_TABLE_LENGTH(info);
while (count) {
/*
* Source is the internal resource descriptor,
* destination is the external AML byte stream buffer
*/
source = ACPI_ADD_PTR(void, resource, info->resource_offset);
destination = ACPI_ADD_PTR(void, aml, info->aml_offset);
switch (info->opcode) {
case ACPI_RSC_INITSET:
ACPI_MEMSET(aml, 0, INIT_RESOURCE_LENGTH(info));
aml_length = INIT_RESOURCE_LENGTH(info);
acpi_rs_set_resource_header(INIT_RESOURCE_TYPE(info),
aml_length, aml);
break;
case ACPI_RSC_INITGET:
break;
case ACPI_RSC_FLAGINIT:
/*
* Clear the flag byte
*/
ACPI_SET8(destination) = 0;
break;
case ACPI_RSC_1BITFLAG:
/*
* Mask and shift the flag bit
*/
ACPI_SET8(destination) |= (u8)
((ACPI_GET8(source) & 0x01) << info->value);
break;
case ACPI_RSC_2BITFLAG:
/*
* Mask and shift the flag bits
*/
ACPI_SET8(destination) |= (u8)
((ACPI_GET8(source) & 0x03) << info->value);
break;
case ACPI_RSC_COUNT:
item_count = ACPI_GET8(source);
ACPI_SET8(destination) = (u8) item_count;
aml_length =
(u16) (aml_length +
(info->value * (item_count - 1)));
break;
case ACPI_RSC_COUNT16:
item_count = ACPI_GET16(source);
aml_length = (u16) (aml_length + item_count);
acpi_rs_set_resource_length(aml_length, aml);
break;
case ACPI_RSC_LENGTH:
acpi_rs_set_resource_length(info->value, aml);
break;
case ACPI_RSC_MOVE8:
case ACPI_RSC_MOVE16:
case ACPI_RSC_MOVE32:
case ACPI_RSC_MOVE64:
if (info->value) {
item_count = info->value;
}
acpi_rs_move_data(destination, source, item_count,
info->opcode);
break;
case ACPI_RSC_ADDRESS:
/* Set the Resource Type, General Flags, and Type-Specific Flags */
acpi_rs_set_address_common(aml, resource);
break;
case ACPI_RSC_SOURCEX:
/*
* Optional resource_source (Index and String)
*/
aml_length =
acpi_rs_set_resource_source(aml, (acpi_rs_length)
aml_length, source);
acpi_rs_set_resource_length(aml_length, aml);
break;
case ACPI_RSC_SOURCE:
/*
* Optional resource_source (Index and String). This is the more
* complicated case used by the Interrupt() macro
*/
aml_length =
acpi_rs_set_resource_source(aml, info->value,
source);
acpi_rs_set_resource_length(aml_length, aml);
break;
case ACPI_RSC_BITMASK:
/*
* 8-bit encoded bitmask (DMA macro)
*/
ACPI_SET8(destination) = (u8)
acpi_rs_encode_bitmask(source,
*ACPI_ADD_PTR(u8, resource,
info->value));
break;
case ACPI_RSC_BITMASK16:
/*
* 16-bit encoded bitmask (IRQ macro)
*/
temp16 = acpi_rs_encode_bitmask(source,
*ACPI_ADD_PTR(u8,
resource,
info->
value));
ACPI_MOVE_16_TO_16(destination, &temp16);
break;
case ACPI_RSC_EXIT_LE:
/*
* Control - Exit conversion if less than or equal
*/
if (item_count <= info->value) {
goto exit;
}
break;
case ACPI_RSC_EXIT_NE:
/*
* Control - Exit conversion if not equal
*/
switch (COMPARE_OPCODE(info)) {
case ACPI_RSC_COMPARE_VALUE:
if (*ACPI_ADD_PTR(u8, resource,
COMPARE_TARGET(info)) !=
COMPARE_VALUE(info)) {
goto exit;
}
break;
default:
ACPI_ERROR((AE_INFO,
"Invalid conversion sub-opcode"));
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
break;
case ACPI_RSC_EXIT_EQ:
/*
* Control - Exit conversion if equal
*/
if (*ACPI_ADD_PTR(u8, resource,
COMPARE_TARGET(info)) ==
COMPARE_VALUE(info)) {
goto exit;
}
break;
default:
ACPI_ERROR((AE_INFO, "Invalid conversion opcode"));
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
count--;
info++;
}
exit:
return_ACPI_STATUS(AE_OK);
}
#if 0
/* Previous resource validations */
if (aml->ext_address64.revision_iD != AML_RESOURCE_EXTENDED_ADDRESS_REVISION) {
return_ACPI_STATUS(AE_SUPPORT);
}
if (resource->data.start_dpf.performance_robustness >= 3) {
return_ACPI_STATUS(AE_AML_BAD_RESOURCE_VALUE);
}
if (((aml->irq.flags & 0x09) == 0x00) || ((aml->irq.flags & 0x09) == 0x09)) {
/*
* Only [active_high, edge_sensitive] or [active_low, level_sensitive]
* polarity/trigger interrupts are allowed (ACPI spec, section
* "IRQ Format"), so 0x00 and 0x09 are illegal.
*/
ACPI_ERROR((AE_INFO,
"Invalid interrupt polarity/trigger in resource list, %X",
aml->irq.flags));
return_ACPI_STATUS(AE_BAD_DATA);
}
resource->data.extended_irq.interrupt_count = temp8;
if (temp8 < 1) {
/* Must have at least one IRQ */
return_ACPI_STATUS(AE_AML_BAD_RESOURCE_LENGTH);
}
if (resource->data.dma.transfer == 0x03) {
ACPI_ERROR((AE_INFO, "Invalid DMA.Transfer preference (3)"));
return_ACPI_STATUS(AE_BAD_DATA);
}
#endif