satip-axe/kernel/arch/arm/plat-stmp3xxx/include/mach/pinmux.h
2015-03-26 17:24:57 +01:00

158 lines
3.7 KiB
C

/*
* Freescale STMP37XX/STMP378X Pin Multiplexing
*
* Author: Vladislav Buzov <vbuzov@embeddedalley.com>
*
* Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*/
/*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#ifndef __PINMUX_H
#define __PINMUX_H
#include <linux/spinlock.h>
#include <linux/types.h>
#include <linux/gpio.h>
#include <asm-generic/gpio.h>
/* Pin definitions */
#include "pins.h"
#include <mach/pins.h>
/*
* Each pin may be routed up to four different HW interfaces
* including GPIO
*/
enum pin_fun {
PIN_FUN1 = 0,
PIN_FUN2,
PIN_FUN3,
PIN_GPIO,
};
/*
* Each pin may have different output drive strength in range from
* 4mA to 20mA. The most common case is 4, 8 and 12 mA strengths.
*/
enum pin_strength {
PIN_4MA = 0,
PIN_8MA,
PIN_12MA,
PIN_16MA,
PIN_20MA,
};
/*
* Each pin can be programmed for 1.8V or 3.3V
*/
enum pin_voltage {
PIN_1_8V = 0,
PIN_3_3V,
};
/*
* Structure to define a group of pins and their parameters
*/
struct pin_desc {
unsigned id;
enum pin_fun fun;
enum pin_strength strength;
enum pin_voltage voltage;
unsigned pullup:1;
};
struct pin_group {
struct pin_desc *pins;
int nr_pins;
};
/* Set pin drive strength */
void stmp3xxx_pin_strength(unsigned id, enum pin_strength strength,
const char *label);
/* Set pin voltage */
void stmp3xxx_pin_voltage(unsigned id, enum pin_voltage voltage,
const char *label);
/* Enable pull-up resistor for a pin */
void stmp3xxx_pin_pullup(unsigned id, int enable, const char *label);
/*
* Request a pin ownership, only one module (identified by @label)
* may own a pin.
*/
int stmp3xxx_request_pin(unsigned id, enum pin_fun fun, const char *label);
/* Release pin */
void stmp3xxx_release_pin(unsigned id, const char *label);
void stmp3xxx_set_pin_type(unsigned id, enum pin_fun fun);
/*
* Each bank is associated with a number of registers to control
* pin function, drive strength, voltage and pull-up reigster. The
* number of registers of a given type depends on the number of bits
* describin particular pin.
*/
#define HW_MUXSEL_NUM 2 /* registers per bank */
#define HW_MUXSEL_PIN_LEN 2 /* bits per pin */
#define HW_MUXSEL_PIN_NUM 16 /* pins per register */
#define HW_MUXSEL_PINFUN_MASK 0x3 /* pin function mask */
#define HW_MUXSEL_PINFUN_NUM 4 /* four options for a pin */
#define HW_DRIVE_NUM 4 /* registers per bank */
#define HW_DRIVE_PIN_LEN 4 /* bits per pin */
#define HW_DRIVE_PIN_NUM 8 /* pins per register */
#define HW_DRIVE_PINDRV_MASK 0x3 /* pin strength mask - 2 bits */
#define HW_DRIVE_PINDRV_NUM 5 /* five possible strength values */
#define HW_DRIVE_PINV_MASK 0x4 /* pin voltage mask - 1 bit */
struct stmp3xxx_pinmux_bank {
struct gpio_chip chip;
/* Pins allocation map */
unsigned long pin_map;
/* Pin owner names */
const char *pin_labels[32];
/* Bank registers */
void __iomem *hw_muxsel[HW_MUXSEL_NUM];
void __iomem *hw_drive[HW_DRIVE_NUM];
void __iomem *hw_pull;
void __iomem *pin2irq,
*irqlevel,
*irqpolarity,
*irqen,
*irqstat;
/* HW MUXSEL register function bit values */
u8 functions[HW_MUXSEL_PINFUN_NUM];
/*
* HW DRIVE register strength bit values:
* 0xff - requested strength is not supported for this bank
*/
u8 strengths[HW_DRIVE_PINDRV_NUM];
/* GPIO things */
void __iomem *hw_gpio_in,
*hw_gpio_out,
*hw_gpio_doe;
int irq, virq;
};
int __init stmp3xxx_pinmux_init(int virtual_irq_start);
#endif /* __PINMUX_H */