satip-axe/kernel/arch/powerpc/platforms/embedded6xx/c2k.c
2015-03-26 17:24:57 +01:00

150 lines
3.6 KiB
C

/*
* Board setup routines for the GEFanuc C2K board
*
* Author: Remi Machet <rmachet@slac.stanford.edu>
*
* Originated from prpmc2800.c
*
* 2008 (c) Stanford University
* 2007 (c) MontaVista, Software, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/seq_file.h>
#include <linux/time.h>
#include <linux/of.h>
#include <asm/machdep.h>
#include <asm/prom.h>
#include <asm/system.h>
#include <asm/time.h>
#include <mm/mmu_decl.h>
#include <sysdev/mv64x60.h>
#define MV64x60_MPP_CNTL_0 0x0000
#define MV64x60_MPP_CNTL_2 0x0008
#define MV64x60_GPP_IO_CNTL 0x0000
#define MV64x60_GPP_LEVEL_CNTL 0x0010
#define MV64x60_GPP_VALUE_SET 0x0018
static void __iomem *mv64x60_mpp_reg_base;
static void __iomem *mv64x60_gpp_reg_base;
static void __init c2k_setup_arch(void)
{
struct device_node *np;
phys_addr_t paddr;
const unsigned int *reg;
/*
* ioremap mpp and gpp registers in case they are later
* needed by c2k_reset_board().
*/
np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-mpp");
reg = of_get_property(np, "reg", NULL);
paddr = of_translate_address(np, reg);
of_node_put(np);
mv64x60_mpp_reg_base = ioremap(paddr, reg[1]);
np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-gpp");
reg = of_get_property(np, "reg", NULL);
paddr = of_translate_address(np, reg);
of_node_put(np);
mv64x60_gpp_reg_base = ioremap(paddr, reg[1]);
#ifdef CONFIG_PCI
mv64x60_pci_init();
#endif
}
static void c2k_reset_board(void)
{
u32 temp;
local_irq_disable();
temp = in_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_0);
temp &= 0xFFFF0FFF;
out_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_0, temp);
temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL);
temp |= 0x00000004;
out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL, temp);
temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL);
temp |= 0x00000004;
out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL, temp);
temp = in_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_2);
temp &= 0xFFFF0FFF;
out_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_2, temp);
temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL);
temp |= 0x00080000;
out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL, temp);
temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL);
temp |= 0x00080000;
out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL, temp);
out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_VALUE_SET, 0x00080004);
}
static void c2k_restart(char *cmd)
{
c2k_reset_board();
msleep(100);
panic("restart failed\n");
}
#ifdef CONFIG_NOT_COHERENT_CACHE
#define COHERENCY_SETTING "off"
#else
#define COHERENCY_SETTING "on"
#endif
void c2k_show_cpuinfo(struct seq_file *m)
{
seq_printf(m, "Vendor\t\t: GEFanuc\n");
seq_printf(m, "coherency\t: %s\n", COHERENCY_SETTING);
}
/*
* Called very early, device-tree isn't unflattened
*/
static int __init c2k_probe(void)
{
unsigned long root = of_get_flat_dt_root();
if (!of_flat_dt_is_compatible(root, "GEFanuc,C2K"))
return 0;
printk(KERN_INFO "Detected a GEFanuc C2K board\n");
_set_L2CR(0);
_set_L2CR(L2CR_L2E | L2CR_L2PE | L2CR_L2I);
return 1;
}
define_machine(c2k) {
.name = "C2K",
.probe = c2k_probe,
.setup_arch = c2k_setup_arch,
.init_early = mv64x60_init_early,
.show_cpuinfo = c2k_show_cpuinfo,
.init_IRQ = mv64x60_init_irq,
.get_irq = mv64x60_get_irq,
.restart = c2k_restart,
.calibrate_decr = generic_calibrate_decr,
};