1238 lines
30 KiB
C
1238 lines
30 KiB
C
/*
|
|
em28xx-core.c - driver for Empia EM2800/EM2820/2840 USB video capture devices
|
|
|
|
Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
|
|
Markus Rechberger <mrechberger@gmail.com>
|
|
Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
Sascha Sommer <saschasommer@freenet.de>
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/list.h>
|
|
#include <linux/module.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/vmalloc.h>
|
|
#include <media/v4l2-common.h>
|
|
|
|
#include "em28xx.h"
|
|
|
|
/* #define ENABLE_DEBUG_ISOC_FRAMES */
|
|
|
|
static unsigned int core_debug;
|
|
module_param(core_debug, int, 0644);
|
|
MODULE_PARM_DESC(core_debug, "enable debug messages [core]");
|
|
|
|
#define em28xx_coredbg(fmt, arg...) do {\
|
|
if (core_debug) \
|
|
printk(KERN_INFO "%s %s :"fmt, \
|
|
dev->name, __func__ , ##arg); } while (0)
|
|
|
|
static unsigned int reg_debug;
|
|
module_param(reg_debug, int, 0644);
|
|
MODULE_PARM_DESC(reg_debug, "enable debug messages [URB reg]");
|
|
|
|
#define em28xx_regdbg(fmt, arg...) do {\
|
|
if (reg_debug) \
|
|
printk(KERN_INFO "%s %s :"fmt, \
|
|
dev->name, __func__ , ##arg); } while (0)
|
|
|
|
static int alt = EM28XX_PINOUT;
|
|
module_param(alt, int, 0644);
|
|
MODULE_PARM_DESC(alt, "alternate setting to use for video endpoint");
|
|
|
|
static unsigned int disable_vbi;
|
|
module_param(disable_vbi, int, 0644);
|
|
MODULE_PARM_DESC(disable_vbi, "disable vbi support");
|
|
|
|
/* FIXME */
|
|
#define em28xx_isocdbg(fmt, arg...) do {\
|
|
if (core_debug) \
|
|
printk(KERN_INFO "%s %s :"fmt, \
|
|
dev->name, __func__ , ##arg); } while (0)
|
|
|
|
/*
|
|
* em28xx_read_reg_req()
|
|
* reads data from the usb device specifying bRequest
|
|
*/
|
|
int em28xx_read_reg_req_len(struct em28xx *dev, u8 req, u16 reg,
|
|
char *buf, int len)
|
|
{
|
|
int ret;
|
|
int pipe = usb_rcvctrlpipe(dev->udev, 0);
|
|
|
|
if (dev->state & DEV_DISCONNECTED)
|
|
return -ENODEV;
|
|
|
|
if (len > URB_MAX_CTRL_SIZE)
|
|
return -EINVAL;
|
|
|
|
if (reg_debug) {
|
|
printk(KERN_DEBUG "(pipe 0x%08x): "
|
|
"IN: %02x %02x %02x %02x %02x %02x %02x %02x ",
|
|
pipe,
|
|
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
|
|
req, 0, 0,
|
|
reg & 0xff, reg >> 8,
|
|
len & 0xff, len >> 8);
|
|
}
|
|
|
|
mutex_lock(&dev->ctrl_urb_lock);
|
|
ret = usb_control_msg(dev->udev, pipe, req,
|
|
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
|
|
0x0000, reg, dev->urb_buf, len, HZ);
|
|
if (ret < 0) {
|
|
if (reg_debug)
|
|
printk(" failed!\n");
|
|
mutex_unlock(&dev->ctrl_urb_lock);
|
|
return ret;
|
|
}
|
|
|
|
if (len)
|
|
memcpy(buf, dev->urb_buf, len);
|
|
|
|
mutex_unlock(&dev->ctrl_urb_lock);
|
|
|
|
if (reg_debug) {
|
|
int byte;
|
|
|
|
printk("<<<");
|
|
for (byte = 0; byte < len; byte++)
|
|
printk(" %02x", (unsigned char)buf[byte]);
|
|
printk("\n");
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* em28xx_read_reg_req()
|
|
* reads data from the usb device specifying bRequest
|
|
*/
|
|
int em28xx_read_reg_req(struct em28xx *dev, u8 req, u16 reg)
|
|
{
|
|
int ret;
|
|
u8 val;
|
|
|
|
ret = em28xx_read_reg_req_len(dev, req, reg, &val, 1);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return val;
|
|
}
|
|
|
|
int em28xx_read_reg(struct em28xx *dev, u16 reg)
|
|
{
|
|
return em28xx_read_reg_req(dev, USB_REQ_GET_STATUS, reg);
|
|
}
|
|
|
|
/*
|
|
* em28xx_write_regs_req()
|
|
* sends data to the usb device, specifying bRequest
|
|
*/
|
|
int em28xx_write_regs_req(struct em28xx *dev, u8 req, u16 reg, char *buf,
|
|
int len)
|
|
{
|
|
int ret;
|
|
int pipe = usb_sndctrlpipe(dev->udev, 0);
|
|
|
|
if (dev->state & DEV_DISCONNECTED)
|
|
return -ENODEV;
|
|
|
|
if ((len < 1) || (len > URB_MAX_CTRL_SIZE))
|
|
return -EINVAL;
|
|
|
|
if (reg_debug) {
|
|
int byte;
|
|
|
|
printk(KERN_DEBUG "(pipe 0x%08x): "
|
|
"OUT: %02x %02x %02x %02x %02x %02x %02x %02x >>>",
|
|
pipe,
|
|
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
|
|
req, 0, 0,
|
|
reg & 0xff, reg >> 8,
|
|
len & 0xff, len >> 8);
|
|
|
|
for (byte = 0; byte < len; byte++)
|
|
printk(" %02x", (unsigned char)buf[byte]);
|
|
printk("\n");
|
|
}
|
|
|
|
mutex_lock(&dev->ctrl_urb_lock);
|
|
memcpy(dev->urb_buf, buf, len);
|
|
ret = usb_control_msg(dev->udev, pipe, req,
|
|
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
|
|
0x0000, reg, dev->urb_buf, len, HZ);
|
|
mutex_unlock(&dev->ctrl_urb_lock);
|
|
|
|
if (dev->wait_after_write)
|
|
msleep(dev->wait_after_write);
|
|
|
|
return ret;
|
|
}
|
|
|
|
int em28xx_write_regs(struct em28xx *dev, u16 reg, char *buf, int len)
|
|
{
|
|
int rc;
|
|
|
|
rc = em28xx_write_regs_req(dev, USB_REQ_GET_STATUS, reg, buf, len);
|
|
|
|
/* Stores GPO/GPIO values at the cache, if changed
|
|
Only write values should be stored, since input on a GPIO
|
|
register will return the input bits.
|
|
Not sure what happens on reading GPO register.
|
|
*/
|
|
if (rc >= 0) {
|
|
if (reg == dev->reg_gpo_num)
|
|
dev->reg_gpo = buf[0];
|
|
else if (reg == dev->reg_gpio_num)
|
|
dev->reg_gpio = buf[0];
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
/* Write a single register */
|
|
int em28xx_write_reg(struct em28xx *dev, u16 reg, u8 val)
|
|
{
|
|
return em28xx_write_regs(dev, reg, &val, 1);
|
|
}
|
|
|
|
/*
|
|
* em28xx_write_reg_bits()
|
|
* sets only some bits (specified by bitmask) of a register, by first reading
|
|
* the actual value
|
|
*/
|
|
static int em28xx_write_reg_bits(struct em28xx *dev, u16 reg, u8 val,
|
|
u8 bitmask)
|
|
{
|
|
int oldval;
|
|
u8 newval;
|
|
|
|
/* Uses cache for gpo/gpio registers */
|
|
if (reg == dev->reg_gpo_num)
|
|
oldval = dev->reg_gpo;
|
|
else if (reg == dev->reg_gpio_num)
|
|
oldval = dev->reg_gpio;
|
|
else
|
|
oldval = em28xx_read_reg(dev, reg);
|
|
|
|
if (oldval < 0)
|
|
return oldval;
|
|
|
|
newval = (((u8) oldval) & ~bitmask) | (val & bitmask);
|
|
|
|
return em28xx_write_regs(dev, reg, &newval, 1);
|
|
}
|
|
|
|
/*
|
|
* em28xx_is_ac97_ready()
|
|
* Checks if ac97 is ready
|
|
*/
|
|
static int em28xx_is_ac97_ready(struct em28xx *dev)
|
|
{
|
|
int ret, i;
|
|
|
|
/* Wait up to 50 ms for AC97 command to complete */
|
|
for (i = 0; i < 10; i++, msleep(5)) {
|
|
ret = em28xx_read_reg(dev, EM28XX_R43_AC97BUSY);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (!(ret & 0x01))
|
|
return 0;
|
|
}
|
|
|
|
em28xx_warn("AC97 command still being executed: not handled properly!\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
/*
|
|
* em28xx_read_ac97()
|
|
* write a 16 bit value to the specified AC97 address (LSB first!)
|
|
*/
|
|
int em28xx_read_ac97(struct em28xx *dev, u8 reg)
|
|
{
|
|
int ret;
|
|
u8 addr = (reg & 0x7f) | 0x80;
|
|
u16 val;
|
|
|
|
ret = em28xx_is_ac97_ready(dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = em28xx_write_regs(dev, EM28XX_R42_AC97ADDR, &addr, 1);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = dev->em28xx_read_reg_req_len(dev, 0, EM28XX_R40_AC97LSB,
|
|
(u8 *)&val, sizeof(val));
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
return le16_to_cpu(val);
|
|
}
|
|
|
|
/*
|
|
* em28xx_write_ac97()
|
|
* write a 16 bit value to the specified AC97 address (LSB first!)
|
|
*/
|
|
int em28xx_write_ac97(struct em28xx *dev, u8 reg, u16 val)
|
|
{
|
|
int ret;
|
|
u8 addr = reg & 0x7f;
|
|
__le16 value;
|
|
|
|
value = cpu_to_le16(val);
|
|
|
|
ret = em28xx_is_ac97_ready(dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = em28xx_write_regs(dev, EM28XX_R40_AC97LSB, (u8 *) &value, 2);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = em28xx_write_regs(dev, EM28XX_R42_AC97ADDR, &addr, 1);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct em28xx_vol_table {
|
|
enum em28xx_amux mux;
|
|
u8 reg;
|
|
};
|
|
|
|
static struct em28xx_vol_table inputs[] = {
|
|
{ EM28XX_AMUX_VIDEO, AC97_VIDEO_VOL },
|
|
{ EM28XX_AMUX_LINE_IN, AC97_LINEIN_VOL },
|
|
{ EM28XX_AMUX_PHONE, AC97_PHONE_VOL },
|
|
{ EM28XX_AMUX_MIC, AC97_MIC_VOL },
|
|
{ EM28XX_AMUX_CD, AC97_CD_VOL },
|
|
{ EM28XX_AMUX_AUX, AC97_AUX_VOL },
|
|
{ EM28XX_AMUX_PCM_OUT, AC97_PCM_OUT_VOL },
|
|
};
|
|
|
|
static int set_ac97_input(struct em28xx *dev)
|
|
{
|
|
int ret, i;
|
|
enum em28xx_amux amux = dev->ctl_ainput;
|
|
|
|
/* EM28XX_AMUX_VIDEO2 is a special case used to indicate that
|
|
em28xx should point to LINE IN, while AC97 should use VIDEO
|
|
*/
|
|
if (amux == EM28XX_AMUX_VIDEO2)
|
|
amux = EM28XX_AMUX_VIDEO;
|
|
|
|
/* Mute all entres but the one that were selected */
|
|
for (i = 0; i < ARRAY_SIZE(inputs); i++) {
|
|
if (amux == inputs[i].mux)
|
|
ret = em28xx_write_ac97(dev, inputs[i].reg, 0x0808);
|
|
else
|
|
ret = em28xx_write_ac97(dev, inputs[i].reg, 0x8000);
|
|
|
|
if (ret < 0)
|
|
em28xx_warn("couldn't setup AC97 register %d\n",
|
|
inputs[i].reg);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int em28xx_set_audio_source(struct em28xx *dev)
|
|
{
|
|
int ret;
|
|
u8 input;
|
|
|
|
if (dev->board.is_em2800) {
|
|
if (dev->ctl_ainput == EM28XX_AMUX_VIDEO)
|
|
input = EM2800_AUDIO_SRC_TUNER;
|
|
else
|
|
input = EM2800_AUDIO_SRC_LINE;
|
|
|
|
ret = em28xx_write_regs(dev, EM2800_R08_AUDIOSRC, &input, 1);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
if (dev->board.has_msp34xx)
|
|
input = EM28XX_AUDIO_SRC_TUNER;
|
|
else {
|
|
switch (dev->ctl_ainput) {
|
|
case EM28XX_AMUX_VIDEO:
|
|
input = EM28XX_AUDIO_SRC_TUNER;
|
|
break;
|
|
default:
|
|
input = EM28XX_AUDIO_SRC_LINE;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (dev->board.mute_gpio && dev->mute)
|
|
em28xx_gpio_set(dev, dev->board.mute_gpio);
|
|
else
|
|
em28xx_gpio_set(dev, INPUT(dev->ctl_input)->gpio);
|
|
|
|
ret = em28xx_write_reg_bits(dev, EM28XX_R0E_AUDIOSRC, input, 0xc0);
|
|
if (ret < 0)
|
|
return ret;
|
|
msleep(5);
|
|
|
|
switch (dev->audio_mode.ac97) {
|
|
case EM28XX_NO_AC97:
|
|
break;
|
|
default:
|
|
ret = set_ac97_input(dev);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct em28xx_vol_table outputs[] = {
|
|
{ EM28XX_AOUT_MASTER, AC97_MASTER_VOL },
|
|
{ EM28XX_AOUT_LINE, AC97_LINE_LEVEL_VOL },
|
|
{ EM28XX_AOUT_MONO, AC97_MASTER_MONO_VOL },
|
|
{ EM28XX_AOUT_LFE, AC97_LFE_MASTER_VOL },
|
|
{ EM28XX_AOUT_SURR, AC97_SURR_MASTER_VOL },
|
|
};
|
|
|
|
int em28xx_audio_analog_set(struct em28xx *dev)
|
|
{
|
|
int ret, i;
|
|
u8 xclk;
|
|
|
|
if (!dev->audio_mode.has_audio)
|
|
return 0;
|
|
|
|
/* It is assumed that all devices use master volume for output.
|
|
It would be possible to use also line output.
|
|
*/
|
|
if (dev->audio_mode.ac97 != EM28XX_NO_AC97) {
|
|
/* Mute all outputs */
|
|
for (i = 0; i < ARRAY_SIZE(outputs); i++) {
|
|
ret = em28xx_write_ac97(dev, outputs[i].reg, 0x8000);
|
|
if (ret < 0)
|
|
em28xx_warn("couldn't setup AC97 register %d\n",
|
|
outputs[i].reg);
|
|
}
|
|
}
|
|
|
|
xclk = dev->board.xclk & 0x7f;
|
|
if (!dev->mute)
|
|
xclk |= EM28XX_XCLK_AUDIO_UNMUTE;
|
|
|
|
ret = em28xx_write_reg(dev, EM28XX_R0F_XCLK, xclk);
|
|
if (ret < 0)
|
|
return ret;
|
|
msleep(10);
|
|
|
|
/* Selects the proper audio input */
|
|
ret = em28xx_set_audio_source(dev);
|
|
|
|
/* Sets volume */
|
|
if (dev->audio_mode.ac97 != EM28XX_NO_AC97) {
|
|
int vol;
|
|
|
|
em28xx_write_ac97(dev, AC97_POWER_DOWN_CTRL, 0x4200);
|
|
em28xx_write_ac97(dev, AC97_EXT_AUD_CTRL, 0x0031);
|
|
em28xx_write_ac97(dev, AC97_PCM_IN_SRATE, 0xbb80);
|
|
|
|
/* LSB: left channel - both channels with the same level */
|
|
vol = (0x1f - dev->volume) | ((0x1f - dev->volume) << 8);
|
|
|
|
/* Mute device, if needed */
|
|
if (dev->mute)
|
|
vol |= 0x8000;
|
|
|
|
/* Sets volume */
|
|
for (i = 0; i < ARRAY_SIZE(outputs); i++) {
|
|
if (dev->ctl_aoutput & outputs[i].mux)
|
|
ret = em28xx_write_ac97(dev, outputs[i].reg,
|
|
vol);
|
|
if (ret < 0)
|
|
em28xx_warn("couldn't setup AC97 register %d\n",
|
|
outputs[i].reg);
|
|
}
|
|
|
|
if (dev->ctl_aoutput & EM28XX_AOUT_PCM_IN) {
|
|
int sel = ac97_return_record_select(dev->ctl_aoutput);
|
|
|
|
/* Use the same input for both left and right
|
|
channels */
|
|
sel |= (sel << 8);
|
|
|
|
em28xx_write_ac97(dev, AC97_RECORD_SELECT, sel);
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(em28xx_audio_analog_set);
|
|
|
|
int em28xx_audio_setup(struct em28xx *dev)
|
|
{
|
|
int vid1, vid2, feat, cfg;
|
|
u32 vid;
|
|
|
|
if (dev->chip_id == CHIP_ID_EM2870 || dev->chip_id == CHIP_ID_EM2874) {
|
|
/* Digital only device - don't load any alsa module */
|
|
dev->audio_mode.has_audio = 0;
|
|
dev->has_audio_class = 0;
|
|
dev->has_alsa_audio = 0;
|
|
return 0;
|
|
}
|
|
|
|
/* If device doesn't support Usb Audio Class, use vendor class */
|
|
if (!dev->has_audio_class)
|
|
dev->has_alsa_audio = 1;
|
|
|
|
dev->audio_mode.has_audio = 1;
|
|
|
|
/* See how this device is configured */
|
|
cfg = em28xx_read_reg(dev, EM28XX_R00_CHIPCFG);
|
|
em28xx_info("Config register raw data: 0x%02x\n", cfg);
|
|
if (cfg < 0) {
|
|
/* Register read error? */
|
|
cfg = EM28XX_CHIPCFG_AC97; /* Be conservative */
|
|
} else if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) == 0x00) {
|
|
/* The device doesn't have vendor audio at all */
|
|
dev->has_alsa_audio = 0;
|
|
dev->audio_mode.has_audio = 0;
|
|
return 0;
|
|
} else if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) ==
|
|
EM28XX_CHIPCFG_I2S_3_SAMPRATES) {
|
|
em28xx_info("I2S Audio (3 sample rates)\n");
|
|
dev->audio_mode.i2s_3rates = 1;
|
|
} else if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) ==
|
|
EM28XX_CHIPCFG_I2S_5_SAMPRATES) {
|
|
em28xx_info("I2S Audio (5 sample rates)\n");
|
|
dev->audio_mode.i2s_5rates = 1;
|
|
}
|
|
|
|
if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) != EM28XX_CHIPCFG_AC97) {
|
|
/* Skip the code that does AC97 vendor detection */
|
|
dev->audio_mode.ac97 = EM28XX_NO_AC97;
|
|
goto init_audio;
|
|
}
|
|
|
|
dev->audio_mode.ac97 = EM28XX_AC97_OTHER;
|
|
|
|
vid1 = em28xx_read_ac97(dev, AC97_VENDOR_ID1);
|
|
if (vid1 < 0) {
|
|
/* Device likely doesn't support AC97 */
|
|
em28xx_warn("AC97 chip type couldn't be determined\n");
|
|
goto init_audio;
|
|
}
|
|
|
|
vid2 = em28xx_read_ac97(dev, AC97_VENDOR_ID2);
|
|
if (vid2 < 0)
|
|
goto init_audio;
|
|
|
|
vid = vid1 << 16 | vid2;
|
|
|
|
dev->audio_mode.ac97_vendor_id = vid;
|
|
em28xx_warn("AC97 vendor ID = 0x%08x\n", vid);
|
|
|
|
feat = em28xx_read_ac97(dev, AC97_RESET);
|
|
if (feat < 0)
|
|
goto init_audio;
|
|
|
|
dev->audio_mode.ac97_feat = feat;
|
|
em28xx_warn("AC97 features = 0x%04x\n", feat);
|
|
|
|
/* Try to identify what audio processor we have */
|
|
if ((vid == 0xffffffff) && (feat == 0x6a90))
|
|
dev->audio_mode.ac97 = EM28XX_AC97_EM202;
|
|
else if ((vid >> 8) == 0x838476)
|
|
dev->audio_mode.ac97 = EM28XX_AC97_SIGMATEL;
|
|
|
|
init_audio:
|
|
/* Reports detected AC97 processor */
|
|
switch (dev->audio_mode.ac97) {
|
|
case EM28XX_NO_AC97:
|
|
em28xx_info("No AC97 audio processor\n");
|
|
break;
|
|
case EM28XX_AC97_EM202:
|
|
em28xx_info("Empia 202 AC97 audio processor detected\n");
|
|
break;
|
|
case EM28XX_AC97_SIGMATEL:
|
|
em28xx_info("Sigmatel audio processor detected(stac 97%02x)\n",
|
|
dev->audio_mode.ac97_vendor_id & 0xff);
|
|
break;
|
|
case EM28XX_AC97_OTHER:
|
|
em28xx_warn("Unknown AC97 audio processor detected!\n");
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return em28xx_audio_analog_set(dev);
|
|
}
|
|
EXPORT_SYMBOL_GPL(em28xx_audio_setup);
|
|
|
|
int em28xx_colorlevels_set_default(struct em28xx *dev)
|
|
{
|
|
em28xx_write_reg(dev, EM28XX_R20_YGAIN, 0x10); /* contrast */
|
|
em28xx_write_reg(dev, EM28XX_R21_YOFFSET, 0x00); /* brightness */
|
|
em28xx_write_reg(dev, EM28XX_R22_UVGAIN, 0x10); /* saturation */
|
|
em28xx_write_reg(dev, EM28XX_R23_UOFFSET, 0x00);
|
|
em28xx_write_reg(dev, EM28XX_R24_VOFFSET, 0x00);
|
|
em28xx_write_reg(dev, EM28XX_R25_SHARPNESS, 0x00);
|
|
|
|
em28xx_write_reg(dev, EM28XX_R14_GAMMA, 0x20);
|
|
em28xx_write_reg(dev, EM28XX_R15_RGAIN, 0x20);
|
|
em28xx_write_reg(dev, EM28XX_R16_GGAIN, 0x20);
|
|
em28xx_write_reg(dev, EM28XX_R17_BGAIN, 0x20);
|
|
em28xx_write_reg(dev, EM28XX_R18_ROFFSET, 0x00);
|
|
em28xx_write_reg(dev, EM28XX_R19_GOFFSET, 0x00);
|
|
return em28xx_write_reg(dev, EM28XX_R1A_BOFFSET, 0x00);
|
|
}
|
|
|
|
int em28xx_capture_start(struct em28xx *dev, int start)
|
|
{
|
|
int rc;
|
|
|
|
if (dev->chip_id == CHIP_ID_EM2874) {
|
|
/* The Transport Stream Enable Register moved in em2874 */
|
|
if (!start) {
|
|
rc = em28xx_write_reg_bits(dev, EM2874_R5F_TS_ENABLE,
|
|
0x00,
|
|
EM2874_TS1_CAPTURE_ENABLE);
|
|
return rc;
|
|
}
|
|
|
|
/* Enable Transport Stream */
|
|
rc = em28xx_write_reg_bits(dev, EM2874_R5F_TS_ENABLE,
|
|
EM2874_TS1_CAPTURE_ENABLE,
|
|
EM2874_TS1_CAPTURE_ENABLE);
|
|
return rc;
|
|
}
|
|
|
|
|
|
/* FIXME: which is the best order? */
|
|
/* video registers are sampled by VREF */
|
|
rc = em28xx_write_reg_bits(dev, EM28XX_R0C_USBSUSP,
|
|
start ? 0x10 : 0x00, 0x10);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
if (!start) {
|
|
/* disable video capture */
|
|
rc = em28xx_write_reg(dev, EM28XX_R12_VINENABLE, 0x27);
|
|
return rc;
|
|
}
|
|
|
|
if (dev->board.is_webcam)
|
|
rc = em28xx_write_reg(dev, 0x13, 0x0c);
|
|
|
|
/* enable video capture */
|
|
rc = em28xx_write_reg(dev, 0x48, 0x00);
|
|
|
|
if (dev->mode == EM28XX_ANALOG_MODE)
|
|
rc = em28xx_write_reg(dev, EM28XX_R12_VINENABLE, 0x67);
|
|
else
|
|
rc = em28xx_write_reg(dev, EM28XX_R12_VINENABLE, 0x37);
|
|
|
|
msleep(6);
|
|
|
|
return rc;
|
|
}
|
|
|
|
int em28xx_vbi_supported(struct em28xx *dev)
|
|
{
|
|
/* Modprobe option to manually disable */
|
|
if (disable_vbi == 1)
|
|
return 0;
|
|
|
|
if (dev->chip_id == CHIP_ID_EM2860 ||
|
|
dev->chip_id == CHIP_ID_EM2883)
|
|
return 1;
|
|
|
|
/* Version of em28xx that does not support VBI */
|
|
return 0;
|
|
}
|
|
|
|
int em28xx_set_outfmt(struct em28xx *dev)
|
|
{
|
|
int ret;
|
|
u8 vinctrl;
|
|
|
|
ret = em28xx_write_reg_bits(dev, EM28XX_R27_OUTFMT,
|
|
dev->format->reg | 0x20, 0xff);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = em28xx_write_reg(dev, EM28XX_R10_VINMODE, dev->vinmode);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
vinctrl = dev->vinctl;
|
|
if (em28xx_vbi_supported(dev) == 1) {
|
|
vinctrl |= EM28XX_VINCTRL_VBI_RAW;
|
|
em28xx_write_reg(dev, EM28XX_R34_VBI_START_H, 0x00);
|
|
em28xx_write_reg(dev, EM28XX_R35_VBI_START_V, 0x09);
|
|
em28xx_write_reg(dev, EM28XX_R36_VBI_WIDTH, 0xb4);
|
|
em28xx_write_reg(dev, EM28XX_R37_VBI_HEIGHT, 0x0c);
|
|
}
|
|
|
|
return em28xx_write_reg(dev, EM28XX_R11_VINCTRL, vinctrl);
|
|
}
|
|
|
|
static int em28xx_accumulator_set(struct em28xx *dev, u8 xmin, u8 xmax,
|
|
u8 ymin, u8 ymax)
|
|
{
|
|
em28xx_coredbg("em28xx Scale: (%d,%d)-(%d,%d)\n",
|
|
xmin, ymin, xmax, ymax);
|
|
|
|
em28xx_write_regs(dev, EM28XX_R28_XMIN, &xmin, 1);
|
|
em28xx_write_regs(dev, EM28XX_R29_XMAX, &xmax, 1);
|
|
em28xx_write_regs(dev, EM28XX_R2A_YMIN, &ymin, 1);
|
|
return em28xx_write_regs(dev, EM28XX_R2B_YMAX, &ymax, 1);
|
|
}
|
|
|
|
static int em28xx_capture_area_set(struct em28xx *dev, u8 hstart, u8 vstart,
|
|
u16 width, u16 height)
|
|
{
|
|
u8 cwidth = width;
|
|
u8 cheight = height;
|
|
u8 overflow = (height >> 7 & 0x02) | (width >> 8 & 0x01);
|
|
|
|
em28xx_coredbg("em28xx Area Set: (%d,%d)\n",
|
|
(width | (overflow & 2) << 7),
|
|
(height | (overflow & 1) << 8));
|
|
|
|
em28xx_write_regs(dev, EM28XX_R1C_HSTART, &hstart, 1);
|
|
em28xx_write_regs(dev, EM28XX_R1D_VSTART, &vstart, 1);
|
|
em28xx_write_regs(dev, EM28XX_R1E_CWIDTH, &cwidth, 1);
|
|
em28xx_write_regs(dev, EM28XX_R1F_CHEIGHT, &cheight, 1);
|
|
return em28xx_write_regs(dev, EM28XX_R1B_OFLOW, &overflow, 1);
|
|
}
|
|
|
|
static int em28xx_scaler_set(struct em28xx *dev, u16 h, u16 v)
|
|
{
|
|
u8 mode;
|
|
/* the em2800 scaler only supports scaling down to 50% */
|
|
|
|
if (dev->board.is_em2800) {
|
|
mode = (v ? 0x20 : 0x00) | (h ? 0x10 : 0x00);
|
|
} else {
|
|
u8 buf[2];
|
|
|
|
buf[0] = h;
|
|
buf[1] = h >> 8;
|
|
em28xx_write_regs(dev, EM28XX_R30_HSCALELOW, (char *)buf, 2);
|
|
|
|
buf[0] = v;
|
|
buf[1] = v >> 8;
|
|
em28xx_write_regs(dev, EM28XX_R32_VSCALELOW, (char *)buf, 2);
|
|
/* it seems that both H and V scalers must be active
|
|
to work correctly */
|
|
mode = (h || v) ? 0x30 : 0x00;
|
|
}
|
|
return em28xx_write_reg_bits(dev, EM28XX_R26_COMPR, mode, 0x30);
|
|
}
|
|
|
|
/* FIXME: this only function read values from dev */
|
|
int em28xx_resolution_set(struct em28xx *dev)
|
|
{
|
|
int width, height;
|
|
width = norm_maxw(dev);
|
|
height = norm_maxh(dev);
|
|
|
|
if (!dev->progressive)
|
|
height >>= norm_maxh(dev);
|
|
|
|
em28xx_set_outfmt(dev);
|
|
|
|
|
|
em28xx_accumulator_set(dev, 1, (width - 4) >> 2, 1, (height - 4) >> 2);
|
|
|
|
/* If we don't set the start position to 4 in VBI mode, we end up
|
|
with line 21 being YUYV encoded instead of being in 8-bit
|
|
greyscale */
|
|
if (em28xx_vbi_supported(dev) == 1)
|
|
em28xx_capture_area_set(dev, 0, 4, width >> 2, height >> 2);
|
|
else
|
|
em28xx_capture_area_set(dev, 0, 0, width >> 2, height >> 2);
|
|
|
|
return em28xx_scaler_set(dev, dev->hscale, dev->vscale);
|
|
}
|
|
|
|
int em28xx_set_alternate(struct em28xx *dev)
|
|
{
|
|
int errCode, prev_alt = dev->alt;
|
|
int i;
|
|
unsigned int min_pkt_size = dev->width * 2 + 4;
|
|
|
|
/* When image size is bigger than a certain value,
|
|
the frame size should be increased, otherwise, only
|
|
green screen will be received.
|
|
*/
|
|
if (dev->width * 2 * dev->height > 720 * 240 * 2)
|
|
min_pkt_size *= 2;
|
|
|
|
for (i = 0; i < dev->num_alt; i++) {
|
|
/* stop when the selected alt setting offers enough bandwidth */
|
|
if (dev->alt_max_pkt_size[i] >= min_pkt_size) {
|
|
dev->alt = i;
|
|
break;
|
|
/* otherwise make sure that we end up with the maximum bandwidth
|
|
because the min_pkt_size equation might be wrong...
|
|
*/
|
|
} else if (dev->alt_max_pkt_size[i] >
|
|
dev->alt_max_pkt_size[dev->alt])
|
|
dev->alt = i;
|
|
}
|
|
|
|
if (dev->alt != prev_alt) {
|
|
em28xx_coredbg("minimum isoc packet size: %u (alt=%d)\n",
|
|
min_pkt_size, dev->alt);
|
|
dev->max_pkt_size = dev->alt_max_pkt_size[dev->alt];
|
|
em28xx_coredbg("setting alternate %d with wMaxPacketSize=%u\n",
|
|
dev->alt, dev->max_pkt_size);
|
|
errCode = usb_set_interface(dev->udev, 0, dev->alt);
|
|
if (errCode < 0) {
|
|
em28xx_errdev("cannot change alternate number to %d (error=%i)\n",
|
|
dev->alt, errCode);
|
|
return errCode;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int em28xx_gpio_set(struct em28xx *dev, struct em28xx_reg_seq *gpio)
|
|
{
|
|
int rc = 0;
|
|
|
|
if (!gpio)
|
|
return rc;
|
|
|
|
if (dev->mode != EM28XX_SUSPEND) {
|
|
em28xx_write_reg(dev, 0x48, 0x00);
|
|
if (dev->mode == EM28XX_ANALOG_MODE)
|
|
em28xx_write_reg(dev, EM28XX_R12_VINENABLE, 0x67);
|
|
else
|
|
em28xx_write_reg(dev, EM28XX_R12_VINENABLE, 0x37);
|
|
msleep(6);
|
|
}
|
|
|
|
/* Send GPIO reset sequences specified at board entry */
|
|
while (gpio->sleep >= 0) {
|
|
if (gpio->reg >= 0) {
|
|
rc = em28xx_write_reg_bits(dev,
|
|
gpio->reg,
|
|
gpio->val,
|
|
gpio->mask);
|
|
if (rc < 0)
|
|
return rc;
|
|
}
|
|
if (gpio->sleep > 0)
|
|
msleep(gpio->sleep);
|
|
|
|
gpio++;
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
int em28xx_set_mode(struct em28xx *dev, enum em28xx_mode set_mode)
|
|
{
|
|
if (dev->mode == set_mode)
|
|
return 0;
|
|
|
|
if (set_mode == EM28XX_SUSPEND) {
|
|
dev->mode = set_mode;
|
|
|
|
/* FIXME: add suspend support for ac97 */
|
|
|
|
return em28xx_gpio_set(dev, dev->board.suspend_gpio);
|
|
}
|
|
|
|
dev->mode = set_mode;
|
|
|
|
if (dev->mode == EM28XX_DIGITAL_MODE)
|
|
return em28xx_gpio_set(dev, dev->board.dvb_gpio);
|
|
else
|
|
return em28xx_gpio_set(dev, INPUT(dev->ctl_input)->gpio);
|
|
}
|
|
EXPORT_SYMBOL_GPL(em28xx_set_mode);
|
|
|
|
/* ------------------------------------------------------------------
|
|
URB control
|
|
------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* IRQ callback, called by URB callback
|
|
*/
|
|
static void em28xx_irq_callback(struct urb *urb)
|
|
{
|
|
struct em28xx *dev = urb->context;
|
|
int rc, i;
|
|
|
|
switch (urb->status) {
|
|
case 0: /* success */
|
|
case -ETIMEDOUT: /* NAK */
|
|
break;
|
|
case -ECONNRESET: /* kill */
|
|
case -ENOENT:
|
|
case -ESHUTDOWN:
|
|
return;
|
|
default: /* error */
|
|
em28xx_isocdbg("urb completition error %d.\n", urb->status);
|
|
break;
|
|
}
|
|
|
|
/* Copy data from URB */
|
|
spin_lock(&dev->slock);
|
|
rc = dev->isoc_ctl.isoc_copy(dev, urb);
|
|
spin_unlock(&dev->slock);
|
|
|
|
/* Reset urb buffers */
|
|
for (i = 0; i < urb->number_of_packets; i++) {
|
|
urb->iso_frame_desc[i].status = 0;
|
|
urb->iso_frame_desc[i].actual_length = 0;
|
|
}
|
|
urb->status = 0;
|
|
|
|
urb->status = usb_submit_urb(urb, GFP_ATOMIC);
|
|
if (urb->status) {
|
|
em28xx_isocdbg("urb resubmit failed (error=%i)\n",
|
|
urb->status);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Stop and Deallocate URBs
|
|
*/
|
|
void em28xx_uninit_isoc(struct em28xx *dev)
|
|
{
|
|
struct urb *urb;
|
|
int i;
|
|
|
|
em28xx_isocdbg("em28xx: called em28xx_uninit_isoc\n");
|
|
|
|
dev->isoc_ctl.nfields = -1;
|
|
for (i = 0; i < dev->isoc_ctl.num_bufs; i++) {
|
|
urb = dev->isoc_ctl.urb[i];
|
|
if (urb) {
|
|
if (!irqs_disabled())
|
|
usb_kill_urb(urb);
|
|
else
|
|
usb_unlink_urb(urb);
|
|
|
|
if (dev->isoc_ctl.transfer_buffer[i]) {
|
|
usb_buffer_free(dev->udev,
|
|
urb->transfer_buffer_length,
|
|
dev->isoc_ctl.transfer_buffer[i],
|
|
urb->transfer_dma);
|
|
}
|
|
usb_free_urb(urb);
|
|
dev->isoc_ctl.urb[i] = NULL;
|
|
}
|
|
dev->isoc_ctl.transfer_buffer[i] = NULL;
|
|
}
|
|
|
|
kfree(dev->isoc_ctl.urb);
|
|
kfree(dev->isoc_ctl.transfer_buffer);
|
|
|
|
dev->isoc_ctl.urb = NULL;
|
|
dev->isoc_ctl.transfer_buffer = NULL;
|
|
dev->isoc_ctl.num_bufs = 0;
|
|
|
|
em28xx_capture_start(dev, 0);
|
|
}
|
|
EXPORT_SYMBOL_GPL(em28xx_uninit_isoc);
|
|
|
|
/*
|
|
* Allocate URBs and start IRQ
|
|
*/
|
|
int em28xx_init_isoc(struct em28xx *dev, int max_packets,
|
|
int num_bufs, int max_pkt_size,
|
|
int (*isoc_copy) (struct em28xx *dev, struct urb *urb))
|
|
{
|
|
struct em28xx_dmaqueue *dma_q = &dev->vidq;
|
|
struct em28xx_dmaqueue *vbi_dma_q = &dev->vbiq;
|
|
int i;
|
|
int sb_size, pipe;
|
|
struct urb *urb;
|
|
int j, k;
|
|
int rc;
|
|
|
|
em28xx_isocdbg("em28xx: called em28xx_prepare_isoc\n");
|
|
|
|
/* De-allocates all pending stuff */
|
|
em28xx_uninit_isoc(dev);
|
|
|
|
dev->isoc_ctl.isoc_copy = isoc_copy;
|
|
dev->isoc_ctl.num_bufs = num_bufs;
|
|
|
|
dev->isoc_ctl.urb = kzalloc(sizeof(void *)*num_bufs, GFP_KERNEL);
|
|
if (!dev->isoc_ctl.urb) {
|
|
em28xx_errdev("cannot alloc memory for usb buffers\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
dev->isoc_ctl.transfer_buffer = kzalloc(sizeof(void *)*num_bufs,
|
|
GFP_KERNEL);
|
|
if (!dev->isoc_ctl.transfer_buffer) {
|
|
em28xx_errdev("cannot allocate memory for usb transfer\n");
|
|
kfree(dev->isoc_ctl.urb);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
dev->isoc_ctl.max_pkt_size = max_pkt_size;
|
|
dev->isoc_ctl.vid_buf = NULL;
|
|
dev->isoc_ctl.vbi_buf = NULL;
|
|
|
|
sb_size = max_packets * dev->isoc_ctl.max_pkt_size;
|
|
|
|
/* allocate urbs and transfer buffers */
|
|
for (i = 0; i < dev->isoc_ctl.num_bufs; i++) {
|
|
urb = usb_alloc_urb(max_packets, GFP_KERNEL);
|
|
if (!urb) {
|
|
em28xx_err("cannot alloc isoc_ctl.urb %i\n", i);
|
|
em28xx_uninit_isoc(dev);
|
|
return -ENOMEM;
|
|
}
|
|
dev->isoc_ctl.urb[i] = urb;
|
|
|
|
dev->isoc_ctl.transfer_buffer[i] = usb_buffer_alloc(dev->udev,
|
|
sb_size, GFP_KERNEL, &urb->transfer_dma);
|
|
if (!dev->isoc_ctl.transfer_buffer[i]) {
|
|
em28xx_err("unable to allocate %i bytes for transfer"
|
|
" buffer %i%s\n",
|
|
sb_size, i,
|
|
in_interrupt() ? " while in int" : "");
|
|
em28xx_uninit_isoc(dev);
|
|
return -ENOMEM;
|
|
}
|
|
memset(dev->isoc_ctl.transfer_buffer[i], 0, sb_size);
|
|
|
|
/* FIXME: this is a hack - should be
|
|
'desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK'
|
|
should also be using 'desc.bInterval'
|
|
*/
|
|
pipe = usb_rcvisocpipe(dev->udev,
|
|
dev->mode == EM28XX_ANALOG_MODE ? 0x82 : 0x84);
|
|
|
|
usb_fill_int_urb(urb, dev->udev, pipe,
|
|
dev->isoc_ctl.transfer_buffer[i], sb_size,
|
|
em28xx_irq_callback, dev, 1);
|
|
|
|
urb->number_of_packets = max_packets;
|
|
urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP;
|
|
|
|
k = 0;
|
|
for (j = 0; j < max_packets; j++) {
|
|
urb->iso_frame_desc[j].offset = k;
|
|
urb->iso_frame_desc[j].length =
|
|
dev->isoc_ctl.max_pkt_size;
|
|
k += dev->isoc_ctl.max_pkt_size;
|
|
}
|
|
}
|
|
|
|
init_waitqueue_head(&dma_q->wq);
|
|
init_waitqueue_head(&vbi_dma_q->wq);
|
|
|
|
em28xx_capture_start(dev, 1);
|
|
|
|
/* submit urbs and enables IRQ */
|
|
for (i = 0; i < dev->isoc_ctl.num_bufs; i++) {
|
|
rc = usb_submit_urb(dev->isoc_ctl.urb[i], GFP_ATOMIC);
|
|
if (rc) {
|
|
em28xx_err("submit of urb %i failed (error=%i)\n", i,
|
|
rc);
|
|
em28xx_uninit_isoc(dev);
|
|
return rc;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(em28xx_init_isoc);
|
|
|
|
/* Determine the packet size for the DVB stream for the given device
|
|
(underlying value programmed into the eeprom) */
|
|
int em28xx_isoc_dvb_max_packetsize(struct em28xx *dev)
|
|
{
|
|
unsigned int chip_cfg2;
|
|
unsigned int packet_size = 564;
|
|
|
|
if (dev->chip_id == CHIP_ID_EM2874) {
|
|
/* FIXME - for now assume 564 like it was before, but the
|
|
em2874 code should be added to return the proper value... */
|
|
packet_size = 564;
|
|
} else {
|
|
/* TS max packet size stored in bits 1-0 of R01 */
|
|
chip_cfg2 = em28xx_read_reg(dev, EM28XX_R01_CHIPCFG2);
|
|
switch (chip_cfg2 & EM28XX_CHIPCFG2_TS_PACKETSIZE_MASK) {
|
|
case EM28XX_CHIPCFG2_TS_PACKETSIZE_188:
|
|
packet_size = 188;
|
|
break;
|
|
case EM28XX_CHIPCFG2_TS_PACKETSIZE_376:
|
|
packet_size = 376;
|
|
break;
|
|
case EM28XX_CHIPCFG2_TS_PACKETSIZE_564:
|
|
packet_size = 564;
|
|
break;
|
|
case EM28XX_CHIPCFG2_TS_PACKETSIZE_752:
|
|
packet_size = 752;
|
|
break;
|
|
}
|
|
}
|
|
|
|
em28xx_coredbg("dvb max packet size=%d\n", packet_size);
|
|
return packet_size;
|
|
}
|
|
EXPORT_SYMBOL_GPL(em28xx_isoc_dvb_max_packetsize);
|
|
|
|
/*
|
|
* em28xx_wake_i2c()
|
|
* configure i2c attached devices
|
|
*/
|
|
void em28xx_wake_i2c(struct em28xx *dev)
|
|
{
|
|
v4l2_device_call_all(&dev->v4l2_dev, 0, core, reset, 0);
|
|
v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_routing,
|
|
INPUT(dev->ctl_input)->vmux, 0, 0);
|
|
v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_stream, 0);
|
|
}
|
|
|
|
/*
|
|
* Device control list
|
|
*/
|
|
|
|
static LIST_HEAD(em28xx_devlist);
|
|
static DEFINE_MUTEX(em28xx_devlist_mutex);
|
|
|
|
struct em28xx *em28xx_get_device(int minor,
|
|
enum v4l2_buf_type *fh_type,
|
|
int *has_radio)
|
|
{
|
|
struct em28xx *h, *dev = NULL;
|
|
|
|
*fh_type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
|
|
*has_radio = 0;
|
|
|
|
mutex_lock(&em28xx_devlist_mutex);
|
|
list_for_each_entry(h, &em28xx_devlist, devlist) {
|
|
if (h->vdev->minor == minor)
|
|
dev = h;
|
|
if (h->vbi_dev && h->vbi_dev->minor == minor) {
|
|
dev = h;
|
|
*fh_type = V4L2_BUF_TYPE_VBI_CAPTURE;
|
|
}
|
|
if (h->radio_dev &&
|
|
h->radio_dev->minor == minor) {
|
|
dev = h;
|
|
*has_radio = 1;
|
|
}
|
|
}
|
|
mutex_unlock(&em28xx_devlist_mutex);
|
|
|
|
return dev;
|
|
}
|
|
|
|
/*
|
|
* em28xx_realease_resources()
|
|
* unregisters the v4l2,i2c and usb devices
|
|
* called when the device gets disconected or at module unload
|
|
*/
|
|
void em28xx_remove_from_devlist(struct em28xx *dev)
|
|
{
|
|
mutex_lock(&em28xx_devlist_mutex);
|
|
list_del(&dev->devlist);
|
|
mutex_unlock(&em28xx_devlist_mutex);
|
|
};
|
|
|
|
void em28xx_add_into_devlist(struct em28xx *dev)
|
|
{
|
|
mutex_lock(&em28xx_devlist_mutex);
|
|
list_add_tail(&dev->devlist, &em28xx_devlist);
|
|
mutex_unlock(&em28xx_devlist_mutex);
|
|
};
|
|
|
|
/*
|
|
* Extension interface
|
|
*/
|
|
|
|
static LIST_HEAD(em28xx_extension_devlist);
|
|
static DEFINE_MUTEX(em28xx_extension_devlist_lock);
|
|
|
|
int em28xx_register_extension(struct em28xx_ops *ops)
|
|
{
|
|
struct em28xx *dev = NULL;
|
|
|
|
mutex_lock(&em28xx_devlist_mutex);
|
|
mutex_lock(&em28xx_extension_devlist_lock);
|
|
list_add_tail(&ops->next, &em28xx_extension_devlist);
|
|
list_for_each_entry(dev, &em28xx_devlist, devlist) {
|
|
if (dev)
|
|
ops->init(dev);
|
|
}
|
|
printk(KERN_INFO "Em28xx: Initialized (%s) extension\n", ops->name);
|
|
mutex_unlock(&em28xx_extension_devlist_lock);
|
|
mutex_unlock(&em28xx_devlist_mutex);
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(em28xx_register_extension);
|
|
|
|
void em28xx_unregister_extension(struct em28xx_ops *ops)
|
|
{
|
|
struct em28xx *dev = NULL;
|
|
|
|
mutex_lock(&em28xx_devlist_mutex);
|
|
list_for_each_entry(dev, &em28xx_devlist, devlist) {
|
|
if (dev)
|
|
ops->fini(dev);
|
|
}
|
|
|
|
mutex_lock(&em28xx_extension_devlist_lock);
|
|
printk(KERN_INFO "Em28xx: Removed (%s) extension\n", ops->name);
|
|
list_del(&ops->next);
|
|
mutex_unlock(&em28xx_extension_devlist_lock);
|
|
mutex_unlock(&em28xx_devlist_mutex);
|
|
}
|
|
EXPORT_SYMBOL(em28xx_unregister_extension);
|
|
|
|
void em28xx_init_extension(struct em28xx *dev)
|
|
{
|
|
struct em28xx_ops *ops = NULL;
|
|
|
|
mutex_lock(&em28xx_extension_devlist_lock);
|
|
if (!list_empty(&em28xx_extension_devlist)) {
|
|
list_for_each_entry(ops, &em28xx_extension_devlist, next) {
|
|
if (ops->init)
|
|
ops->init(dev);
|
|
}
|
|
}
|
|
mutex_unlock(&em28xx_extension_devlist_lock);
|
|
}
|
|
|
|
void em28xx_close_extension(struct em28xx *dev)
|
|
{
|
|
struct em28xx_ops *ops = NULL;
|
|
|
|
mutex_lock(&em28xx_extension_devlist_lock);
|
|
if (!list_empty(&em28xx_extension_devlist)) {
|
|
list_for_each_entry(ops, &em28xx_extension_devlist, next) {
|
|
if (ops->fini)
|
|
ops->fini(dev);
|
|
}
|
|
}
|
|
mutex_unlock(&em28xx_extension_devlist_lock);
|
|
}
|