satip-axe/kernel/arch/cris/boot/compressed/misc.c
2015-03-26 17:24:57 +01:00

392 lines
8.8 KiB
C

/*
* misc.c
*
* This is a collection of several routines from gzip-1.0.3
* adapted for Linux.
*
* malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
* puts by Nick Holloway 1993, better puts by Martin Mares 1995
* adaptation for Linux/CRIS Axis Communications AB, 1999
*
*/
/* where the piggybacked kernel image expects itself to live.
* it is the same address we use when we network load an uncompressed
* image into DRAM, and it is the address the kernel is linked to live
* at by vmlinux.lds.S
*/
#define KERNEL_LOAD_ADR 0x40004000
#include <linux/types.h>
#ifdef CONFIG_ETRAX_ARCH_V32
#include <hwregs/reg_rdwr.h>
#include <hwregs/reg_map.h>
#include <hwregs/ser_defs.h>
#include <hwregs/pinmux_defs.h>
#ifdef CONFIG_CRIS_MACH_ARTPEC3
#include <hwregs/clkgen_defs.h>
#endif
#else
#include <arch/svinto.h>
#endif
/*
* gzip declarations
*/
#define OF(args) args
#define STATIC static
void *memset(void *s, int c, size_t n);
void *memcpy(void *__dest, __const void *__src, size_t __n);
#define memzero(s, n) memset((s), 0, (n))
typedef unsigned char uch;
typedef unsigned short ush;
typedef unsigned long ulg;
#define WSIZE 0x8000 /* Window size must be at least 32k, */
/* and a power of two */
static uch *inbuf; /* input buffer */
static uch window[WSIZE]; /* Sliding window buffer */
unsigned inptr = 0; /* index of next byte to be processed in inbuf
* After decompression it will contain the
* compressed size, and head.S will read it.
*/
static unsigned outcnt = 0; /* bytes in output buffer */
/* gzip flag byte */
#define ASCII_FLAG 0x01 /* bit 0 set: file probably ascii text */
#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */
#define ORIG_NAME 0x08 /* bit 3 set: original file name present */
#define COMMENT 0x10 /* bit 4 set: file comment present */
#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */
#define RESERVED 0xC0 /* bit 6,7: reserved */
#define get_byte() (inbuf[inptr++])
/* Diagnostic functions */
#ifdef DEBUG
# define Assert(cond, msg) do { \
if (!(cond)) \
error(msg); \
} while (0)
# define Trace(x) fprintf x
# define Tracev(x) do { \
if (verbose) \
fprintf x; \
} while (0)
# define Tracevv(x) do { \
if (verbose > 1) \
fprintf x; \
} while (0)
# define Tracec(c, x) do { \
if (verbose && (c)) \
fprintf x; \
} while (0)
# define Tracecv(c, x) do { \
if (verbose > 1 && (c)) \
fprintf x; \
} while (0)
#else
# define Assert(cond, msg)
# define Trace(x)
# define Tracev(x)
# define Tracevv(x)
# define Tracec(c, x)
# define Tracecv(c, x)
#endif
static void flush_window(void);
static void error(char *m);
static void puts(const char *);
extern char *input_data; /* lives in head.S */
static long bytes_out;
static uch *output_data;
static unsigned long output_ptr;
/* the "heap" is put directly after the BSS ends, at end */
extern int _end;
static long free_mem_ptr = (long)&_end;
static long free_mem_end_ptr;
#include "../../../../../lib/inflate.c"
/* decompressor info and error messages to serial console */
#ifdef CONFIG_ETRAX_ARCH_V32
static inline void serout(const char *s, reg_scope_instances regi_ser)
{
reg_ser_rs_stat_din rs;
reg_ser_rw_dout dout = {.data = *s};
do {
rs = REG_RD(ser, regi_ser, rs_stat_din);
}
while (!rs.tr_rdy);/* Wait for transceiver. */
REG_WR(ser, regi_ser, rw_dout, dout);
}
#endif
static void puts(const char *s)
{
#ifndef CONFIG_ETRAX_DEBUG_PORT_NULL
while (*s) {
#ifdef CONFIG_ETRAX_DEBUG_PORT0
#ifdef CONFIG_ETRAX_ARCH_V32
serout(s, regi_ser0);
#else
while (!(*R_SERIAL0_STATUS & (1 << 5)))
;
*R_SERIAL0_TR_DATA = *s++;
#endif
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT1
#ifdef CONFIG_ETRAX_ARCH_V32
serout(s, regi_ser1);
#else
while (!(*R_SERIAL1_STATUS & (1 << 5)))
;
*R_SERIAL1_TR_DATA = *s++;
#endif
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT2
#ifdef CONFIG_ETRAX_ARCH_V32
serout(s, regi_ser2);
#else
while (!(*R_SERIAL2_STATUS & (1 << 5)))
;
*R_SERIAL2_TR_DATA = *s++;
#endif
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT3
#ifdef CONFIG_ETRAX_ARCH_V32
serout(s, regi_ser3);
#else
while (!(*R_SERIAL3_STATUS & (1 << 5)))
;
*R_SERIAL3_TR_DATA = *s++;
#endif
#endif
*s++;
}
/* CONFIG_ETRAX_DEBUG_PORT_NULL */
#endif
}
void *memset(void *s, int c, size_t n)
{
int i;
char *ss = (char*)s;
for (i=0;i<n;i++) ss[i] = c;
return s;
}
void *memcpy(void *__dest, __const void *__src, size_t __n)
{
int i;
char *d = (char *)__dest, *s = (char *)__src;
for (i = 0; i < __n; i++)
d[i] = s[i];
return __dest;
}
/* ===========================================================================
* Write the output window window[0..outcnt-1] and update crc and bytes_out.
* (Used for the decompressed data only.)
*/
static void flush_window(void)
{
ulg c = crc; /* temporary variable */
unsigned n;
uch *in, *out, ch;
in = window;
out = &output_data[output_ptr];
for (n = 0; n < outcnt; n++) {
ch = *out = *in;
out++;
in++;
c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
}
crc = c;
bytes_out += (ulg)outcnt;
output_ptr += (ulg)outcnt;
outcnt = 0;
}
static void error(char *x)
{
puts("\n\n");
puts(x);
puts("\n\n -- System halted\n");
while(1); /* Halt */
}
void setup_normal_output_buffer(void)
{
output_data = (char *)KERNEL_LOAD_ADR;
}
#ifdef CONFIG_ETRAX_ARCH_V32
static inline void serial_setup(reg_scope_instances regi_ser)
{
reg_ser_rw_xoff xoff;
reg_ser_rw_tr_ctrl tr_ctrl;
reg_ser_rw_rec_ctrl rec_ctrl;
reg_ser_rw_tr_baud_div tr_baud;
reg_ser_rw_rec_baud_div rec_baud;
/* Turn off XOFF. */
xoff = REG_RD(ser, regi_ser, rw_xoff);
xoff.chr = 0;
xoff.automatic = regk_ser_no;
REG_WR(ser, regi_ser, rw_xoff, xoff);
/* Set baudrate and stopbits. */
tr_ctrl = REG_RD(ser, regi_ser, rw_tr_ctrl);
rec_ctrl = REG_RD(ser, regi_ser, rw_rec_ctrl);
tr_baud = REG_RD(ser, regi_ser, rw_tr_baud_div);
rec_baud = REG_RD(ser, regi_ser, rw_rec_baud_div);
tr_ctrl.stop_bits = 1; /* 2 stop bits. */
tr_ctrl.en = 1; /* enable transmitter */
rec_ctrl.en = 1; /* enabler receiver */
/*
* The baudrate setup used to be a bit fishy, but now transmitter and
* receiver are both set to the intended baud rate, 115200.
* The magic value is 29.493 MHz.
*/
tr_ctrl.base_freq = regk_ser_f29_493;
rec_ctrl.base_freq = regk_ser_f29_493;
tr_baud.div = (29493000 / 8) / 115200;
rec_baud.div = (29493000 / 8) / 115200;
REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl);
REG_WR(ser, regi_ser, rw_tr_baud_div, tr_baud);
REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl);
REG_WR(ser, regi_ser, rw_rec_baud_div, rec_baud);
}
#endif
void decompress_kernel(void)
{
char revision;
char compile_rev;
#ifdef CONFIG_ETRAX_ARCH_V32
/* Need at least a CRISv32 to run. */
compile_rev = 32;
#if defined(CONFIG_ETRAX_DEBUG_PORT1) || \
defined(CONFIG_ETRAX_DEBUG_PORT2) || \
defined(CONFIG_ETRAX_DEBUG_PORT3)
reg_pinmux_rw_hwprot hwprot;
#ifdef CONFIG_CRIS_MACH_ARTPEC3
reg_clkgen_rw_clk_ctrl clk_ctrl;
/* Enable corresponding clock region when serial 1..3 selected */
clk_ctrl = REG_RD(clkgen, regi_clkgen, rw_clk_ctrl);
clk_ctrl.sser_ser_dma6_7 = regk_clkgen_yes;
REG_WR(clkgen, regi_clkgen, rw_clk_ctrl, clk_ctrl);
#endif
/* pinmux setup for ports 1..3 */
hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot);
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT0
serial_setup(regi_ser0);
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT1
hwprot.ser1 = regk_pinmux_yes;
serial_setup(regi_ser1);
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT2
hwprot.ser2 = regk_pinmux_yes;
serial_setup(regi_ser2);
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT3
hwprot.ser3 = regk_pinmux_yes;
serial_setup(regi_ser3);
#endif
#if defined(CONFIG_ETRAX_DEBUG_PORT1) || \
defined(CONFIG_ETRAX_DEBUG_PORT2) || \
defined(CONFIG_ETRAX_DEBUG_PORT3)
REG_WR(pinmux, regi_pinmux, rw_hwprot, hwprot);
#endif
/* input_data is set in head.S */
inbuf = input_data;
#else /* CRISv10 */
/* Need at least a crisv10 to run. */
compile_rev = 10;
/* input_data is set in head.S */
inbuf = input_data;
#ifdef CONFIG_ETRAX_DEBUG_PORT0
*R_SERIAL0_XOFF = 0;
*R_SERIAL0_BAUD = 0x99;
*R_SERIAL0_TR_CTRL = 0x40;
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT1
*R_SERIAL1_XOFF = 0;
*R_SERIAL1_BAUD = 0x99;
*R_SERIAL1_TR_CTRL = 0x40;
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT2
*R_GEN_CONFIG = 0x08;
*R_SERIAL2_XOFF = 0;
*R_SERIAL2_BAUD = 0x99;
*R_SERIAL2_TR_CTRL = 0x40;
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT3
*R_GEN_CONFIG = 0x100;
*R_SERIAL3_XOFF = 0;
*R_SERIAL3_BAUD = 0x99;
*R_SERIAL3_TR_CTRL = 0x40;
#endif
#endif
setup_normal_output_buffer();
makecrc();
__asm__ volatile ("move $vr,%0" : "=rm" (revision));
if (revision < compile_rev) {
#ifdef CONFIG_ETRAX_ARCH_V32
puts("You need an ETRAX FS to run Linux 2.6/crisv32\n");
#else
puts("You need an ETRAX 100LX to run linux 2.6\n");
#endif
while(1);
}
puts("Uncompressing Linux...\n");
gunzip();
puts("Done. Now booting the kernel\n");
}