satip-axe/kernel/drivers/media/video/ibmmpeg2.h
2015-03-26 17:24:57 +01:00

95 lines
2.7 KiB
C

/* ibmmpeg2.h - IBM MPEGCD21 definitions */
#ifndef __IBM_MPEG2__
#define __IBM_MPEG2__
/* Define all MPEG Decoder registers */
/* Chip Control and Status */
#define IBM_MP2_CHIP_CONTROL 0x200*2
#define IBM_MP2_CHIP_MODE 0x201*2
/* Timer Control and Status */
#define IBM_MP2_SYNC_STC2 0x202*2
#define IBM_MP2_SYNC_STC1 0x203*2
#define IBM_MP2_SYNC_STC0 0x204*2
#define IBM_MP2_SYNC_PTS2 0x205*2
#define IBM_MP2_SYNC_PTS1 0x206*2
#define IBM_MP2_SYNC_PTS0 0x207*2
/* Video FIFO Control */
#define IBM_MP2_FIFO 0x208*2
#define IBM_MP2_FIFOW 0x100*2
#define IBM_MP2_FIFO_STAT 0x209*2
#define IBM_MP2_RB_THRESHOLD 0x22b*2
/* Command buffer */
#define IBM_MP2_COMMAND 0x20a*2
#define IBM_MP2_CMD_DATA 0x20b*2
#define IBM_MP2_CMD_STAT 0x20c*2
#define IBM_MP2_CMD_ADDR 0x20d*2
/* Internal Processor Control and Status */
#define IBM_MP2_PROC_IADDR 0x20e*2
#define IBM_MP2_PROC_IDATA 0x20f*2
#define IBM_MP2_WR_PROT 0x235*2
/* DRAM Access */
#define IBM_MP2_DRAM_ADDR 0x210*2
#define IBM_MP2_DRAM_DATA 0x212*2
#define IBM_MP2_DRAM_CMD_STAT 0x213*2
#define IBM_MP2_BLOCK_SIZE 0x23b*2
#define IBM_MP2_SRC_ADDR 0x23c*2
/* Onscreen Display */
#define IBM_MP2_OSD_ADDR 0x214*2
#define IBM_MP2_OSD_DATA 0x215*2
#define IBM_MP2_OSD_MODE 0x217*2
#define IBM_MP2_OSD_LINK_ADDR 0x229*2
#define IBM_MP2_OSD_SIZE 0x22a*2
/* Interrupt Control */
#define IBM_MP2_HOST_INT 0x218*2
#define IBM_MP2_MASK0 0x219*2
#define IBM_MP2_HOST_INT1 0x23e*2
#define IBM_MP2_MASK1 0x23f*2
/* Audio Control */
#define IBM_MP2_AUD_IADDR 0x21a*2
#define IBM_MP2_AUD_IDATA 0x21b*2
#define IBM_MP2_AUD_FIFO 0x21c*2
#define IBM_MP2_AUD_FIFOW 0x101*2
#define IBM_MP2_AUD_CTL 0x21d*2
#define IBM_MP2_BEEP_CTL 0x21e*2
#define IBM_MP2_FRNT_ATTEN 0x22d*2
/* Display Control */
#define IBM_MP2_DISP_MODE 0x220*2
#define IBM_MP2_DISP_DLY 0x221*2
#define IBM_MP2_VBI_CTL 0x222*2
#define IBM_MP2_DISP_LBOR 0x223*2
#define IBM_MP2_DISP_TBOR 0x224*2
/* Polarity Control */
#define IBM_MP2_INFC_CTL 0x22c*2
/* control commands */
#define IBM_MP2_PLAY 0
#define IBM_MP2_PAUSE 1
#define IBM_MP2_SINGLE_FRAME 2
#define IBM_MP2_FAST_FORWARD 3
#define IBM_MP2_SLOW_MOTION 4
#define IBM_MP2_IMED_NORM_PLAY 5
#define IBM_MP2_RESET_WINDOW 6
#define IBM_MP2_FREEZE_FRAME 7
#define IBM_MP2_RESET_VID_RATE 8
#define IBM_MP2_CONFIG_DECODER 9
#define IBM_MP2_CHANNEL_SWITCH 10
#define IBM_MP2_RESET_AUD_RATE 11
#define IBM_MP2_PRE_OP_CHN_SW 12
#define IBM_MP2_SET_STILL_MODE 14
/* Define Xilinx FPGA Internal Registers */
/* general control register 0 */
#define XILINX_CTL0 0x600
/* genlock delay resister 1 */
#define XILINX_GLDELAY 0x602
/* send 16 bits to CS3310 port */
#define XILINX_CS3310 0x604
/* send 16 bits to CS3310 and complete */
#define XILINX_CS3310_CMPLT 0x60c
/* pulse width modulator control */
#define XILINX_PWM 0x606
#endif