satip-axe/kernel/drivers/stm/mali/common/mali_osk_mali.h
2015-03-26 17:24:57 +01:00

253 lines
11 KiB
C

/*
* Copyright (C) 2010-2011 ARM Limited. All rights reserved.
*
* This program is free software and is provided to you under the terms of the GNU General Public License version 2
* as published by the Free Software Foundation, and any use by you of this program is subject to the terms of such GNU licence.
*
* A copy of the licence is included with the program, and can also be obtained from Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*/
/**
* @file mali_osk_mali.h
* Defines the OS abstraction layer which is specific for the Mali kernel device driver (OSK)
*/
#ifndef __MALI_OSK_MALI_H__
#define __MALI_OSK_MALI_H__
#include <mali_osk.h>
#ifdef __cplusplus
extern "C"
{
#endif
/** @addtogroup _mali_osk_miscellaneous
* @{ */
/** @brief Initialize the OSK layer
*
* This function is used to setup any initialization of OSK functionality, if
* required.
*
* This must be the first function called from the common code, specifically,
* from the common code entry-point, mali_kernel_constructor.
*
* The OS-integration into the OS's kernel must handle calling of
* mali_kernel_constructor when the device driver is loaded.
*
* @return _MALI_OSK_ERR_OK on success, or a suitable _mali_osk_errcode_t on
* failure.
*/
_mali_osk_errcode_t _mali_osk_init( void );
/** @brief Terminate the OSK layer
*
* This function is used to terminate any resources initialized by
* _mali_osk_init.
*
* This must be the last function called from the common code, specifically,
* from the common code closedown function, mali_kernel_destructor, and the
* error path in mali_kernel_constructor.
*
* The OS-integration into the OS's kernel must handle calling of
* mali_kernel_destructor when the device driver is terminated.
*/
void _mali_osk_term( void );
/** @brief Read the Mali Resource configuration
*
* Populates a _mali_arch_resource_t array from configuration settings, which
* are stored in an OS-specific way.
*
* For example, these may be compiled in to a static structure, or read from
* the filesystem at startup.
*
* On failure, do not call _mali_osk_resources_term.
*
* @param arch_config a pointer to the store the pointer to the resources
* @param num_resources the number of resources read
* @return _MALI_OSK_ERR_OK on success. _MALI_OSK_ERR_NOMEM on allocation
* error. For other failures, a suitable _mali_osk_errcode_t is returned.
*/
_mali_osk_errcode_t _mali_osk_resources_init( _mali_osk_resource_t **arch_config, u32 *num_resources );
/** @brief Free resources allocated by _mali_osk_resources_init.
*
* Frees the _mali_arch_resource_t array allocated by _mali_osk_resources_init
*
* @param arch_config a pointer to the stored the pointer to the resources
* @param num_resources the number of resources in the array
*/
void _mali_osk_resources_term( _mali_osk_resource_t **arch_config, u32 num_resources);
/** @} */ /* end group _mali_osk_miscellaneous */
/** @addtogroup _mali_osk_low_level_memory
* @{ */
/** @brief Initialize a user-space accessible memory range
*
* This initializes a virtual address range such that it is reserved for the
* current process, but does not map any physical pages into this range.
*
* This function may initialize or adjust any members of the
* mali_memory_allocation \a descriptor supplied, before the physical pages are
* mapped in with _mali_osk_mem_mapregion_map().
*
* The function will always be called with MALI_MEMORY_ALLOCATION_FLAG_MAP_INTO_USERSPACE
* set in \a descriptor->flags. It is an error to call this function without
* setting this flag. Otherwise, \a descriptor->flags bits are reserved for
* future expansion
*
* The \a descriptor's process_addr_mapping_info member can be modified to
* allocate OS-specific information. Note that on input, this will be a
* ukk_private word from the U/K inteface, as inserted by _mali_ukk_mem_mmap().
* This is used to pass information from the U/K interface to the OSK interface,
* if necessary. The precise usage of the process_addr_mapping_info member
* depends on the U/K implementation of _mali_ukk_mem_mmap().
*
* Therefore, the U/K implementation of _mali_ukk_mem_mmap() and the OSK
* implementation of _mali_osk_mem_mapregion_init() must agree on the meaning and
* usage of the ukk_private word and process_addr_mapping_info member.
*
* Refer to \ref u_k_api for more information on the U/K interface.
*
* On successful return, \a descriptor's mapping member will be correct for
* use with _mali_osk_mem_mapregion_term() and _mali_osk_mem_mapregion_map().
*
* @param descriptor the mali_memory_allocation to initialize.
*/
_mali_osk_errcode_t _mali_osk_mem_mapregion_init( mali_memory_allocation * descriptor );
/** @brief Terminate a user-space accessible memory range
*
* This terminates a virtual address range reserved in the current user process,
* where none, some or all of the virtual address ranges have mappings to
* physical pages.
*
* It will unmap any physical pages that had been mapped into a reserved
* virtual address range for the current process, and then releases the virtual
* address range. Any extra book-keeping information or resources allocated
* during _mali_osk_mem_mapregion_init() will also be released.
*
* The \a descriptor itself is not freed - this must be handled by the caller of
* _mali_osk_mem_mapregion_term().
*
* The function will always be called with MALI_MEMORY_ALLOCATION_FLAG_MAP_INTO_USERSPACE
* set in descriptor->flags. It is an error to call this function without
* setting this flag. Otherwise, descriptor->flags bits are reserved for
* future expansion
*
* @param descriptor the mali_memory_allocation to terminate.
*/
void _mali_osk_mem_mapregion_term( mali_memory_allocation * descriptor );
/** @brief Map physical pages into a user process's virtual address range
*
* This is used to map a number of physically contigous pages into a
* user-process's virtual address range, which was previously reserved by a
* call to _mali_osk_mem_mapregion_init().
*
* This need not provide a mapping for the entire virtual address range
* reserved for \a descriptor - it may be used to map single pages per call.
*
* The function will always be called with MALI_MEMORY_ALLOCATION_FLAG_MAP_INTO_USERSPACE
* set in \a descriptor->flags. It is an error to call this function without
* setting this flag. Otherwise, \a descriptor->flags bits are reserved for
* future expansion
*
* The function may supply \a *phys_addr == \ref MALI_MEMORY_ALLOCATION_OS_ALLOCATED_PHYSADDR_MAGIC.
* In this case, \a size must be set to \ref _MALI_OSK_CPU_PAGE_SIZE, and the function
* will allocate the physical page itself. The physical address of the
* allocated page will be returned through \a phys_addr.
*
* It is an error to set \a size != \ref _MALI_OSK_CPU_PAGE_SIZE while
* \a *phys_addr == \ref MALI_MEMORY_ALLOCATION_OS_ALLOCATED_PHYSADDR_MAGIC,
* since it is not always possible for OSs to support such a setting through this
* interface.
*
* @note \b IMPORTANT: This code must validate the input parameters. If the
* range defined by \a offset and \a size is outside the range allocated in
* \a descriptor, then this function \b MUST not attempt any mapping, and must
* instead return a suitable \ref _mali_osk_errcode_t \b failure code.
*
* @param[in,out] descriptor the mali_memory_allocation representing the
* user-process's virtual address range to map into.
*
* @param[in] offset the offset into the virtual address range. This is only added
* to the mapping member of the \a descriptor, and not the \a phys_addr parameter.
* It must be a multiple of \ref _MALI_OSK_CPU_PAGE_SIZE.
*
* @param[in,out] phys_addr a pointer to the physical base address to begin the
* mapping from. If \a size == \ref _MALI_OSK_CPU_PAGE_SIZE and
* \a *phys_addr == \ref MALI_MEMORY_ALLOCATION_OS_ALLOCATED_PHYSADDR_MAGIC, then this
* function will allocate the physical page itself, and return the
* physical address of the page through \a phys_addr, which will be aligned to
* \ref _MALI_OSK_CPU_PAGE_SIZE. Otherwise, \a *phys_addr must be aligned to
* \ref _MALI_OSK_CPU_PAGE_SIZE, and is unmodified after the call.
* \a phys_addr is unaffected by the \a offset parameter.
*
* @param[in] size the number of bytes to map in. This must be a multiple of
* \ref _MALI_OSK_CPU_PAGE_SIZE.
*
* @return _MALI_OSK_ERR_OK on sucess, otherwise a _mali_osk_errcode_t value
* on failure
*
* @note could expand to use _mali_osk_mem_mapregion_flags_t instead of
* \ref MALI_MEMORY_ALLOCATION_OS_ALLOCATED_PHYSADDR_MAGIC, but note that we must
* also modify the mali process address manager in the mmu/memory engine code.
*/
_mali_osk_errcode_t _mali_osk_mem_mapregion_map( mali_memory_allocation * descriptor, u32 offset, u32 *phys_addr, u32 size );
/** @brief Unmap physical pages from a user process's virtual address range
*
* This is used to unmap a number of physically contigous pages from a
* user-process's virtual address range, which were previously mapped by a
* call to _mali_osk_mem_mapregion_map(). If the range specified was allocated
* from OS memory, then that memory will be returned to the OS. Whilst pages
* will be mapped out, the Virtual address range remains reserved, and at the
* same base address.
*
* When this function is used to unmap pages from OS memory
* (_mali_osk_mem_mapregion_map() was called with *phys_addr ==
* \ref MALI_MEMORY_ALLOCATION_OS_ALLOCATED_PHYSADDR_MAGIC), then the \a flags must
* include \ref _MALI_OSK_MEM_MAPREGION_FLAG_OS_ALLOCATED_PHYSADDR. This is because
* it is not always easy for an OS implementation to discover whether the
* memory was OS allocated or not (and so, how it should release the memory).
*
* For this reason, only a range of pages of the same allocation type (all OS
* allocated, or none OS allocacted) may be unmapped in one call. Multiple
* calls must be made if allocations of these different types exist across the
* entire region described by the \a descriptor.
*
* The function will always be called with MALI_MEMORY_ALLOCATION_FLAG_MAP_INTO_USERSPACE
* set in \a descriptor->flags. It is an error to call this function without
* setting this flag. Otherwise, \a descriptor->flags bits are reserved for
* future expansion
*
* @param[in,out] descriptor the mali_memory_allocation representing the
* user-process's virtual address range to map into.
*
* @param[in] offset the offset into the virtual address range. This is only added
* to the mapping member of the \a descriptor. \a offset must be a multiple of
* \ref _MALI_OSK_CPU_PAGE_SIZE.
*
* @param[in] size the number of bytes to unmap. This must be a multiple of
* \ref _MALI_OSK_CPU_PAGE_SIZE.
*
* @param[in] flags specifies how the memory should be unmapped. For a range
* of pages that were originally OS allocated, this must have
* \ref _MALI_OSK_MEM_MAPREGION_FLAG_OS_ALLOCATED_PHYSADDR set.
*/
void _mali_osk_mem_mapregion_unmap( mali_memory_allocation * descriptor, u32 offset, u32 size, _mali_osk_mem_mapregion_flags_t flags );
/** @} */ /* end group _mali_osk_low_level_memory */
#ifdef __cplusplus
}
#endif
#endif /* __MALI_OSK_MALI_H__ */