44 lines
1.4 KiB
Plaintext
44 lines
1.4 KiB
Plaintext
ADS Bitsy Single Board Computer
|
|
(It is different from Bitsy(iPAQ) of Compaq)
|
|
|
|
For more details, contact Applied Data Systems or see
|
|
http://www.applieddata.net/products.html
|
|
|
|
The Linux support for this product has been provided by
|
|
Woojung Huh <whuh@applieddata.net>
|
|
|
|
Use 'make adsbitsy_config' before any 'make config'.
|
|
This will set up defaults for ADS Bitsy support.
|
|
|
|
The kernel zImage is linked to be loaded and executed at 0xc0400000.
|
|
|
|
Linux can be used with the ADS BootLoader that ships with the
|
|
newer rev boards. See their documentation on how to load Linux.
|
|
|
|
Supported peripherals:
|
|
- SA1100 LCD frame buffer (8/16bpp...sort of)
|
|
- SA1111 USB Master
|
|
- SA1100 serial port
|
|
- pcmcia, compact flash
|
|
- touchscreen(ucb1200)
|
|
- console on LCD screen
|
|
- serial ports (ttyS[0-2])
|
|
- ttyS0 is default for serial console
|
|
|
|
To do:
|
|
- everything else! :-)
|
|
|
|
Notes:
|
|
|
|
- The flash on board is divided into 3 partitions.
|
|
You should be careful to use flash on board.
|
|
It's partition is different from GraphicsClient Plus and GraphicsMaster
|
|
|
|
- 16bpp mode requires a different cable than what ships with the board.
|
|
Contact ADS or look through the manual to wire your own. Currently,
|
|
if you compile with 16bit mode support and switch into a lower bpp
|
|
mode, the timing is off so the image is corrupted. This will be
|
|
fixed soon.
|
|
|
|
Any contribution can be sent to nico@fluxnic.net and will be greatly welcome!
|