149 lines
5.7 KiB
Plaintext
149 lines
5.7 KiB
Plaintext
|
|
bttv and sound mini howto
|
|
=========================
|
|
|
|
There are alot of different bt848/849/878/879 based boards available.
|
|
Making video work often is not a big deal, because this is handled
|
|
completely by the bt8xx chip, which is common on all boards. But
|
|
sound is handled in slightly different ways on each board.
|
|
|
|
To handle the grabber boards correctly, there is a array tvcards[] in
|
|
bttv-cards.c, which holds the informations required for each board.
|
|
Sound will work only, if the correct entry is used (for video it often
|
|
makes no difference). The bttv driver prints a line to the kernel
|
|
log, telling which card type is used. Like this one:
|
|
|
|
bttv0: model: BT848(Hauppauge old) [autodetected]
|
|
|
|
You should verify this is correct. If it isn't, you have to pass the
|
|
correct board type as insmod argument, "insmod bttv card=2" for
|
|
example. The file CARDLIST has a list of valid arguments for card.
|
|
If your card isn't listed there, you might check the source code for
|
|
new entries which are not listed yet. If there isn't one for your
|
|
card, you can check if one of the existing entries does work for you
|
|
(just trial and error...).
|
|
|
|
Some boards have an extra processor for sound to do stereo decoding
|
|
and other nice features. The msp34xx chips are used by Hauppauge for
|
|
example. If your board has one, you might have to load a helper
|
|
module like msp3400.o to make sound work. If there isn't one for the
|
|
chip used on your board: Bad luck. Start writing a new one. Well,
|
|
you might want to check the video4linux mailing list archive first...
|
|
|
|
Of course you need a correctly installed soundcard unless you have the
|
|
speakers connected directly to the grabber board. Hint: check the
|
|
mixer settings too. ALSA for example has everything muted by default.
|
|
|
|
|
|
How sound works in detail
|
|
=========================
|
|
|
|
Still doesn't work? Looks like some driver hacking is required.
|
|
Below is a do-it-yourself description for you.
|
|
|
|
The bt8xx chips have 32 general purpose pins, and registers to control
|
|
these pins. One register is the output enable register
|
|
(BT848_GPIO_OUT_EN), it says which pins are actively driven by the
|
|
bt848 chip. Another one is the data register (BT848_GPIO_DATA), where
|
|
you can get/set the status if these pins. They can be used for input
|
|
and output.
|
|
|
|
Most grabber board vendors use these pins to control an external chip
|
|
which does the sound routing. But every board is a little different.
|
|
These pins are also used by some companies to drive remote control
|
|
receiver chips. Some boards use the i2c bus instead of the gpio pins
|
|
to connect the mux chip.
|
|
|
|
As mentioned above, there is a array which holds the required
|
|
informations for each known board. You basically have to create a new
|
|
line for your board. The important fields are these two:
|
|
|
|
struct tvcard
|
|
{
|
|
[ ... ]
|
|
u32 gpiomask;
|
|
u32 audiomux[6]; /* Tuner, Radio, external, internal, mute, stereo */
|
|
};
|
|
|
|
gpiomask specifies which pins are used to control the audio mux chip.
|
|
The corresponding bits in the output enable register
|
|
(BT848_GPIO_OUT_EN) will be set as these pins must be driven by the
|
|
bt848 chip.
|
|
|
|
The audiomux[] array holds the data values for the different inputs
|
|
(i.e. which pins must be high/low for tuner/mute/...). This will be
|
|
written to the data register (BT848_GPIO_DATA) to switch the audio
|
|
mux.
|
|
|
|
|
|
What you have to do is figure out the correct values for gpiomask and
|
|
the audiomux array. If you have Windows and the drivers four your
|
|
card installed, you might to check out if you can read these registers
|
|
values used by the windows driver. A tool to do this is available
|
|
from ftp://telepresence.dmem.strath.ac.uk/pub/bt848/winutil, but it
|
|
does'nt work with bt878 boards according to some reports I received.
|
|
Another one with bt878 suport is available from
|
|
http://btwincap.sourceforge.net/Files/btspy2.00.zip
|
|
|
|
You might also dig around in the *.ini files of the Windows applications.
|
|
You can have a look at the board to see which of the gpio pins are
|
|
connected at all and then start trial-and-error ...
|
|
|
|
|
|
Starting with release 0.7.41 bttv has a number of insmod options to
|
|
make the gpio debugging easier:
|
|
|
|
bttv_gpio=0/1 enable/disable gpio debug messages
|
|
gpiomask=n set the gpiomask value
|
|
audiomux=i,j,... set the values of the audiomux array
|
|
audioall=a set the values of the audiomux array (one
|
|
value for all array elements, useful to check
|
|
out which effect the particular value has).
|
|
|
|
The messages printed with bttv_gpio=1 look like this:
|
|
|
|
bttv0: gpio: en=00000027, out=00000024 in=00ffffd8 [audio: off]
|
|
|
|
en = output _en_able register (BT848_GPIO_OUT_EN)
|
|
out = _out_put bits of the data register (BT848_GPIO_DATA),
|
|
i.e. BT848_GPIO_DATA & BT848_GPIO_OUT_EN
|
|
in = _in_put bits of the data register,
|
|
i.e. BT848_GPIO_DATA & ~BT848_GPIO_OUT_EN
|
|
|
|
|
|
|
|
Other elements of the tvcards array
|
|
===================================
|
|
|
|
If you are trying to make a new card work you might find it useful to
|
|
know what the other elements in the tvcards array are good for:
|
|
|
|
video_inputs - # of video inputs the card has
|
|
audio_inputs - historical cruft, not used any more.
|
|
tuner - which input is the tuner
|
|
svhs - which input is svhs (all others are labeled composite)
|
|
muxsel - video mux, input->registervalue mapping
|
|
pll - same as pll= insmod option
|
|
tuner_type - same as tuner= insmod option
|
|
*_modulename - hint whenever some card needs this or that audio
|
|
module loaded to work properly.
|
|
has_radio - whenever this TV card has a radio tuner.
|
|
no_msp34xx - "1" disables loading of msp3400.o module
|
|
no_tda9875 - "1" disables loading of tda9875.o module
|
|
needs_tvaudio - set to "1" to load tvaudio.o module
|
|
|
|
If some config item is specified both from the tvcards array and as
|
|
insmod option, the insmod option takes precedence.
|
|
|
|
|
|
|
|
Good luck,
|
|
|
|
Gerd
|
|
|
|
|
|
PS: If you have a new working entry, mail it to me.
|
|
|
|
--
|
|
Gerd Knorr <kraxel@bytesex.org>
|