satip-axe/kernel/arch/arm/mach-at91/include/mach/at91_twi.h
2015-03-26 17:24:57 +01:00

69 lines
3.0 KiB
C

/*
* arch/arm/mach-at91/include/mach/at91_twi.h
*
* Copyright (C) 2005 Ivan Kokshaysky
* Copyright (C) SAN People
*
* Two-wire Interface (TWI) registers.
* Based on AT91RM9200 datasheet revision E.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef AT91_TWI_H
#define AT91_TWI_H
#define AT91_TWI_CR 0x00 /* Control Register */
#define AT91_TWI_START (1 << 0) /* Send a Start Condition */
#define AT91_TWI_STOP (1 << 1) /* Send a Stop Condition */
#define AT91_TWI_MSEN (1 << 2) /* Master Transfer Enable */
#define AT91_TWI_MSDIS (1 << 3) /* Master Transfer Disable */
#define AT91_TWI_SVEN (1 << 4) /* Slave Transfer Enable [SAM9260 only] */
#define AT91_TWI_SVDIS (1 << 5) /* Slave Transfer Disable [SAM9260 only] */
#define AT91_TWI_SWRST (1 << 7) /* Software Reset */
#define AT91_TWI_MMR 0x04 /* Master Mode Register */
#define AT91_TWI_IADRSZ (3 << 8) /* Internal Device Address Size */
#define AT91_TWI_IADRSZ_NO (0 << 8)
#define AT91_TWI_IADRSZ_1 (1 << 8)
#define AT91_TWI_IADRSZ_2 (2 << 8)
#define AT91_TWI_IADRSZ_3 (3 << 8)
#define AT91_TWI_MREAD (1 << 12) /* Master Read Direction */
#define AT91_TWI_DADR (0x7f << 16) /* Device Address */
#define AT91_TWI_SMR 0x08 /* Slave Mode Register [SAM9260 only] */
#define AT91_TWI_SADR (0x7f << 16) /* Slave Address */
#define AT91_TWI_IADR 0x0c /* Internal Address Register */
#define AT91_TWI_CWGR 0x10 /* Clock Waveform Generator Register */
#define AT91_TWI_CLDIV (0xff << 0) /* Clock Low Divisor */
#define AT91_TWI_CHDIV (0xff << 8) /* Clock High Divisor */
#define AT91_TWI_CKDIV (7 << 16) /* Clock Divider */
#define AT91_TWI_SR 0x20 /* Status Register */
#define AT91_TWI_TXCOMP (1 << 0) /* Transmission Complete */
#define AT91_TWI_RXRDY (1 << 1) /* Receive Holding Register Ready */
#define AT91_TWI_TXRDY (1 << 2) /* Transmit Holding Register Ready */
#define AT91_TWI_SVREAD (1 << 3) /* Slave Read [SAM9260 only] */
#define AT91_TWI_SVACC (1 << 4) /* Slave Access [SAM9260 only] */
#define AT91_TWI_GACC (1 << 5) /* General Call Access [SAM9260 only] */
#define AT91_TWI_OVRE (1 << 6) /* Overrun Error [AT91RM9200 only] */
#define AT91_TWI_UNRE (1 << 7) /* Underrun Error [AT91RM9200 only] */
#define AT91_TWI_NACK (1 << 8) /* Not Acknowledged */
#define AT91_TWI_ARBLST (1 << 9) /* Arbitration Lost [SAM9260 only] */
#define AT91_TWI_SCLWS (1 << 10) /* Clock Wait State [SAM9260 only] */
#define AT91_TWI_EOSACC (1 << 11) /* End of Slave Address [SAM9260 only] */
#define AT91_TWI_IER 0x24 /* Interrupt Enable Register */
#define AT91_TWI_IDR 0x28 /* Interrupt Disable Register */
#define AT91_TWI_IMR 0x2c /* Interrupt Mask Register */
#define AT91_TWI_RHR 0x30 /* Receive Holding Register */
#define AT91_TWI_THR 0x34 /* Transmit Holding Register */
#endif