satip-axe/kernel/arch/sh/drivers/pci/pci-sh7780.c
2015-03-26 17:24:57 +01:00

147 lines
4.1 KiB
C

/*
* Low-Level PCI Support for the SH7780
*
* Copyright (C) 2005 - 2009 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/errno.h>
#include <linux/delay.h>
#include "pci-sh4.h"
static struct resource sh7785_io_resource = {
.name = "SH7785_IO",
.start = SH7780_PCI_IO_BASE,
.end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1,
.flags = IORESOURCE_IO
};
static struct resource sh7785_mem_resource = {
.name = "SH7785_mem",
.start = SH7780_PCI_MEMORY_BASE,
.end = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1,
.flags = IORESOURCE_MEM
};
static struct pci_channel sh7780_pci_controller = {
.pci_ops = &sh4_pci_ops,
.mem_resource = &sh7785_mem_resource,
.mem_offset = 0x00000000,
.io_resource = &sh7785_io_resource,
.io_offset = 0x00000000,
.io_map_base = SH7780_PCI_IO_BASE,
};
static struct sh4_pci_address_map sh7780_pci_map = {
.window0 = {
#if defined(CONFIG_32BIT)
.base = SH7780_32BIT_DDR_BASE_ADDR,
.size = 0x40000000,
#else
.base = SH7780_CS0_BASE_ADDR,
.size = 0x20000000,
#endif
},
};
static int __init sh7780_pci_init(void)
{
struct pci_channel *chan = &sh7780_pci_controller;
unsigned int id;
const char *type = NULL;
int ret;
u32 word;
printk(KERN_NOTICE "PCI: Starting intialization.\n");
chan->reg_base = 0xfe040000;
/* Enable CPU access to the PCIC registers. */
__raw_writel(PCIECR_ENBL, PCIECR);
id = __raw_readw(chan->reg_base + SH7780_PCIVID);
if (id != SH7780_VENDOR_ID) {
printk(KERN_ERR "PCI: Unknown vendor ID 0x%04x.\n", id);
return -ENODEV;
}
id = __raw_readw(chan->reg_base + SH7780_PCIDID);
type = (id == SH7763_DEVICE_ID) ? "SH7763" :
(id == SH7780_DEVICE_ID) ? "SH7780" :
(id == SH7781_DEVICE_ID) ? "SH7781" :
(id == SH7785_DEVICE_ID) ? "SH7785" :
NULL;
if (unlikely(!type)) {
printk(KERN_ERR "PCI: Found an unsupported Renesas host "
"controller, device id 0x%04x.\n", id);
return -EINVAL;
}
printk(KERN_NOTICE "PCI: Found a Renesas %s host "
"controller, revision %d.\n", type,
__raw_readb(chan->reg_base + SH7780_PCIRID));
if ((ret = sh4_pci_check_direct(chan)) != 0)
return ret;
/*
* Set the class and sub-class codes.
*/
__raw_writeb(PCI_CLASS_BRIDGE_HOST >> 8,
chan->reg_base + SH7780_PCIBCC);
__raw_writeb(PCI_CLASS_BRIDGE_HOST & 0xff,
chan->reg_base + SH7780_PCISUB);
/*
* Set IO and Mem windows to local address
* Make PCI and local address the same for easy 1 to 1 mapping
*/
pci_write_reg(chan, sh7780_pci_map.window0.size - 0xfffff, SH4_PCILSR0);
/* Set the values on window 0 PCI config registers */
pci_write_reg(chan, sh7780_pci_map.window0.base, SH4_PCILAR0);
pci_write_reg(chan, sh7780_pci_map.window0.base, SH7780_PCIMBAR0);
pci_write_reg(chan, 0x0000380f, SH4_PCIAINTM);
/* Set up standard PCI config registers */
__raw_writew(0xFB00, chan->reg_base + SH7780_PCISTATUS);
__raw_writew(0x0047, chan->reg_base + SH7780_PCICMD);
__raw_writew(0x1912, chan->reg_base + SH7780_PCISVID);
__raw_writew(0x0001, chan->reg_base + SH7780_PCISID);
__raw_writeb(0x00, chan->reg_base + SH7780_PCIPIF);
/* Apply any last-minute PCIC fixups */
pci_fixup_pcic(chan);
pci_write_reg(chan, 0xfd000000, SH7780_PCIMBR0);
pci_write_reg(chan, 0x00fc0000, SH7780_PCIMBMR0);
#ifdef CONFIG_32BIT
pci_write_reg(chan, 0xc0000000, SH7780_PCIMBR2);
pci_write_reg(chan, 0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2);
#endif
/* Set IOBR for windows containing area specified in pci.h */
pci_write_reg(chan, chan->io_resource->start & ~(SH7780_PCI_IO_SIZE-1),
SH7780_PCIIOBR);
pci_write_reg(chan, ((SH7780_PCI_IO_SIZE-1) & (7<<18)),
SH7780_PCIIOBMR);
/* SH7780 init done, set central function init complete */
/* use round robin mode to stop a device starving/overruning */
word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_FTO;
pci_write_reg(chan, word, SH4_PCICR);
register_pci_controller(chan);
return 0;
}
arch_initcall(sh7780_pci_init);