607 lines
16 KiB
C
607 lines
16 KiB
C
/*
|
|
* (c) 2010 STMicroelectronics Limited
|
|
*
|
|
* Author: Pawel Moll <pawel.moll@st.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/stm/pad.h>
|
|
#include <linux/stm/stx7200.h>
|
|
#include <asm/irq-ilc.h>
|
|
|
|
|
|
|
|
/* ASC resources ---------------------------------------------------------- */
|
|
|
|
static struct stm_pad_config stx7200_asc_pad_configs[] = {
|
|
[0] = {
|
|
.gpios_num = 4,
|
|
.gpios = (struct stm_pad_gpio []) {
|
|
STM_PAD_PIO_OUT(0, 0, 1), /* TX */
|
|
STM_PAD_PIO_IN(0, 1, -1), /* RX */
|
|
STM_PAD_PIO_IN_NAMED(0, 4, -1, "CTS"),
|
|
STM_PAD_PIO_OUT_NAMED(0, 7, 1, "RTS"),
|
|
},
|
|
.sysconfs_num = 2,
|
|
.sysconfs = (struct stm_pad_sysconf []) {
|
|
/* Route UART0/1 and MPX instead of DVP to pins:
|
|
* CONF_PAD_PIO[5] = 0 */
|
|
STM_PAD_SYS_CFG(7, 29, 29, 0),
|
|
/* Route UART0 instead of PDES to pins:
|
|
* PDES_SCMUX_OUT = 0 */
|
|
STM_PAD_SYS_CFG(0, 0, 0, 0),
|
|
},
|
|
},
|
|
[1] = {
|
|
.gpios_num = 4,
|
|
.gpios = (struct stm_pad_gpio []) {
|
|
STM_PAD_PIO_OUT(1, 0, 1), /* TX */
|
|
STM_PAD_PIO_IN(1, 1, -1), /* RX */
|
|
STM_PAD_PIO_IN_NAMED(1, 4, -1, "CTS"),
|
|
STM_PAD_PIO_OUT_NAMED(1, 5, 1, "RTS"),
|
|
},
|
|
.sysconfs_num = 2, /* !!! see stx7200_configure_asc() */
|
|
.sysconfs = (struct stm_pad_sysconf []) {
|
|
/* CONF_PAD_PIO[5] = 0 - route UART0/1 and
|
|
* MPX instead of DVP to pins */
|
|
STM_PAD_SYS_CFG(7, 29, 29, 0),
|
|
/* Route UART1 RTS/CTS instead of dvo to pins.
|
|
* CONF_PAD_PIO[0] = 0 */
|
|
STM_PAD_SYS_CFG(7, 24, 24, 0),
|
|
},
|
|
},
|
|
[2] = {
|
|
.gpios_num = 4,
|
|
.gpios = (struct stm_pad_gpio []) {
|
|
STM_PAD_PIO_OUT(4, 3, 1), /* TX */
|
|
STM_PAD_PIO_IN(4, 2, -1), /* RX */
|
|
STM_PAD_PIO_IN_NAMED(4, 4, -1, "CTS"),
|
|
STM_PAD_PIO_OUT_NAMED(4, 5, 1, "RTS"),
|
|
},
|
|
.sysconfs_num = 4, /* !!! see stx7200_configure_asc() */
|
|
.sysconfs = (struct stm_pad_sysconf []) {
|
|
/* Route UART2 (in and out) and PWM_OUT0 instead of
|
|
* SCI to pins: SSC2_MUX_SEL = 0 */
|
|
STM_PAD_SYS_CFG(7, 2, 2, 0),
|
|
/* Route UART2&3/SCI outputs instead of DVP to pins.
|
|
* CONF_PAD_PIO[1]=0 */
|
|
STM_PAD_SYS_CFG(7, 25, 25, 0),
|
|
/* No idea, more routing:
|
|
* CONF_PAD_PIO[0] = 0 */
|
|
STM_PAD_SYS_CFG(7, 24, 24, 0),
|
|
/* Route UART2&3 RTS/CTS or SCI inputs instead of DVP
|
|
* to pins: CONF_PAD_DVP = 0 */
|
|
STM_PAD_SYS_CFG(40, 16, 16, 0),
|
|
},
|
|
},
|
|
[3] = {
|
|
.gpios_num = 4, /* !!! see stx7200_configure_asc() */
|
|
.gpios = (struct stm_pad_gpio []) {
|
|
STM_PAD_PIO_OUT(5, 4, 1), /* TX */
|
|
STM_PAD_PIO_IN(5, 3, -1), /* RX */
|
|
STM_PAD_PIO_IN_NAMED(5, 5, -1, "CTS"),
|
|
STM_PAD_PIO_OUT_NAMED(5, 6, 1, "RTS"),
|
|
},
|
|
.sysconfs_num = 2, /* !!! see stx7200_configure_asc() */
|
|
.sysconfs = (struct stm_pad_sysconf []) {
|
|
/* Route UART3 (in and out) instead of SCI to pins:
|
|
* SSC3_MUX_SEL = 0 */
|
|
STM_PAD_SYS_CFG(7, 3, 3, 0),
|
|
/* No idea, more routing (RTS/CTS):
|
|
* CONF_PAD_PIO[4] = 0 */
|
|
STM_PAD_SYS_CFG(7, 28, 28, 0),
|
|
},
|
|
},
|
|
};
|
|
|
|
static struct platform_device stx7200_asc_devices[] = {
|
|
[0] = {
|
|
.name = "stm-asc",
|
|
/* .id set in stx7200_configure_asc() */
|
|
.num_resources = 4,
|
|
.resource = (struct resource[]) {
|
|
STM_PLAT_RESOURCE_MEM(0xfd030000, 0x2c),
|
|
STM_PLAT_RESOURCE_IRQ(ILC_IRQ(104), -1),
|
|
STM_PLAT_RESOURCE_DMA_NAMED("rx_half_full", 19),
|
|
STM_PLAT_RESOURCE_DMA_NAMED("tx_half_empty", 23),
|
|
},
|
|
.dev.platform_data = &(struct stm_plat_asc_data) {
|
|
.pad_config = &stx7200_asc_pad_configs[0],
|
|
},
|
|
},
|
|
[1] = {
|
|
.name = "stm-asc",
|
|
/* .id set in stx7200_configure_asc() */
|
|
.num_resources = 4,
|
|
.resource = (struct resource[]) {
|
|
STM_PLAT_RESOURCE_MEM(0xfd031000, 0x2c),
|
|
STM_PLAT_RESOURCE_IRQ(ILC_IRQ(105), -1),
|
|
STM_PLAT_RESOURCE_DMA_NAMED("rx_half_full", 20),
|
|
STM_PLAT_RESOURCE_DMA_NAMED("tx_half_empty", 24),
|
|
},
|
|
.dev.platform_data = &(struct stm_plat_asc_data) {
|
|
.pad_config = &stx7200_asc_pad_configs[1],
|
|
},
|
|
},
|
|
[2] = {
|
|
.name = "stm-asc",
|
|
/* .id set in stx7200_configure_asc() */
|
|
.num_resources = 4,
|
|
.resource = (struct resource[]) {
|
|
STM_PLAT_RESOURCE_MEM(0xfd032000, 0x2c),
|
|
STM_PLAT_RESOURCE_IRQ(ILC_IRQ(106), -1),
|
|
STM_PLAT_RESOURCE_DMA_NAMED("rx_half_full", 21),
|
|
STM_PLAT_RESOURCE_DMA_NAMED("tx_half_empty", 25),
|
|
},
|
|
.dev.platform_data = &(struct stm_plat_asc_data) {
|
|
.pad_config = &stx7200_asc_pad_configs[2],
|
|
},
|
|
},
|
|
[3] = {
|
|
.name = "stm-asc",
|
|
/* .id set in stx7200_configure_asc() */
|
|
.num_resources = 4,
|
|
.resource = (struct resource[]) {
|
|
STM_PLAT_RESOURCE_MEM(0xfd033000, 0x2c),
|
|
STM_PLAT_RESOURCE_IRQ(ILC_IRQ(107), -1),
|
|
STM_PLAT_RESOURCE_DMA_NAMED("rx_half_full", 22),
|
|
STM_PLAT_RESOURCE_DMA_NAMED("tx_half_empty", 26),
|
|
},
|
|
.dev.platform_data = &(struct stm_plat_asc_data) {
|
|
.pad_config = &stx7200_asc_pad_configs[3],
|
|
},
|
|
},
|
|
};
|
|
|
|
/* Note these three variables are global, and shared with the stasc driver
|
|
* for console bring up prior to platform initialisation. */
|
|
|
|
/* the serial console device */
|
|
int __initdata stm_asc_console_device;
|
|
|
|
/* Platform devices to register */
|
|
unsigned int __initdata stm_asc_configured_devices_num = 0;
|
|
struct platform_device __initdata
|
|
*stm_asc_configured_devices[ARRAY_SIZE(stx7200_asc_devices)];
|
|
|
|
void __init stx7200_configure_asc(int asc, struct stx7200_asc_config *config)
|
|
{
|
|
static int configured[ARRAY_SIZE(stx7200_asc_devices)];
|
|
static int tty_id;
|
|
struct stx7200_asc_config default_config = {};
|
|
struct platform_device *pdev;
|
|
struct stm_plat_asc_data *plat_data;
|
|
|
|
BUG_ON(asc < 0 || asc >= ARRAY_SIZE(stx7200_asc_devices));
|
|
|
|
BUG_ON(configured[asc]);
|
|
configured[asc] = 1;
|
|
|
|
if (!config)
|
|
config = &default_config;
|
|
|
|
if (!config->hw_flow_control) {
|
|
struct stm_pad_config *pad_config =
|
|
&stx7200_asc_pad_configs[asc];
|
|
|
|
/* Don't claim RTS/CTS pads */
|
|
stm_pad_set_pio_ignored(pad_config, "RTS");
|
|
stm_pad_set_pio_ignored(pad_config, "CTS");
|
|
|
|
/* sysconf values responsible for RTS/CTS routing
|
|
* are defined as the last ones... */
|
|
if (asc == 1 || asc == 2 || asc == 3)
|
|
pad_config->sysconfs_num--;
|
|
}
|
|
|
|
pdev = &stx7200_asc_devices[asc];
|
|
plat_data = pdev->dev.platform_data;
|
|
|
|
pdev->id = tty_id++;
|
|
plat_data->hw_flow_control = config->hw_flow_control;
|
|
|
|
if (config->is_console)
|
|
stm_asc_console_device = pdev->id;
|
|
|
|
stm_asc_configured_devices[stm_asc_configured_devices_num++] = pdev;
|
|
}
|
|
|
|
/* Add platform device as configured by board specific code */
|
|
static int __init stx7200_add_asc(void)
|
|
{
|
|
return platform_add_devices(stm_asc_configured_devices,
|
|
stm_asc_configured_devices_num);
|
|
}
|
|
arch_initcall(stx7200_add_asc);
|
|
|
|
|
|
|
|
/* SSC resources ---------------------------------------------------------- */
|
|
|
|
/* Pad configuration for I2C mode */
|
|
static struct stm_pad_config stx7200_ssc_i2c_pad_configs[] = {
|
|
[0] = {
|
|
.gpios_num = 2,
|
|
.gpios = (struct stm_pad_gpio []) {
|
|
STM_PAD_PIO_BIDIR_NAMED(2, 0, 1, "SCL"),
|
|
STM_PAD_PIO_BIDIR_NAMED(2, 1, 1, "SDA"),
|
|
},
|
|
.sysconfs_num = 1,
|
|
.sysconfs = (struct stm_pad_sysconf []) {
|
|
/* SSC0_MUX_SEL = 0 (default assignment) */
|
|
STM_PAD_SYS_CFG(7, 0, 0, 0),
|
|
},
|
|
},
|
|
[1] = {
|
|
.gpios_num = 2,
|
|
.gpios = (struct stm_pad_gpio []) {
|
|
STM_PAD_PIO_BIDIR_NAMED(3, 0, 1, "SCL"),
|
|
STM_PAD_PIO_BIDIR_NAMED(3, 1, 1, "SDA"),
|
|
},
|
|
.sysconfs_num = 1,
|
|
.sysconfs = (struct stm_pad_sysconf []) {
|
|
/* SSC1_MUX_SEL = 0 (default assignment) */
|
|
STM_PAD_SYS_CFG(7, 1, 1, 0),
|
|
},
|
|
},
|
|
[2] = {
|
|
.gpios_num = 2,
|
|
.gpios = (struct stm_pad_gpio []) {
|
|
STM_PAD_PIO_BIDIR_NAMED(4, 0, 1, "SCL"),
|
|
STM_PAD_PIO_BIDIR_NAMED(4, 1, 1, "SDA"),
|
|
},
|
|
.sysconfs_num = 1,
|
|
.sysconfs = (struct stm_pad_sysconf []) {
|
|
/* SSC2_MUX_SEL = 0 (separate PIOs) */
|
|
STM_PAD_SYS_CFG(7, 2, 2, 0),
|
|
},
|
|
},
|
|
[3] = {
|
|
.gpios_num = 2,
|
|
.gpios = (struct stm_pad_gpio []) {
|
|
STM_PAD_PIO_BIDIR_NAMED(5, 0, 1, "SCL"),
|
|
STM_PAD_PIO_BIDIR_NAMED(5, 1, 1, "SDA"),
|
|
},
|
|
.sysconfs_num = 1,
|
|
.sysconfs = (struct stm_pad_sysconf []) {
|
|
/* SSC3_MUX_SEL = 0 (separate PIOs) */
|
|
STM_PAD_SYS_CFG(7, 3, 3, 0),
|
|
},
|
|
},
|
|
[4] = {
|
|
.gpios_num = 2,
|
|
.gpios = (struct stm_pad_gpio []) {
|
|
STM_PAD_PIO_BIDIR_NAMED(7, 6, 1, "SCL"),
|
|
STM_PAD_PIO_BIDIR_NAMED(7, 7, 1, "SDA"),
|
|
},
|
|
.sysconfs_num = 1,
|
|
.sysconfs = (struct stm_pad_sysconf []) {
|
|
/* SSC4_MUX_SEL = 0 (separate PIOs) */
|
|
STM_PAD_SYS_CFG(7, 4, 4, 0),
|
|
},
|
|
},
|
|
};
|
|
|
|
/* Pad configuration for SPI mode */
|
|
static struct stm_pad_config stx7200_ssc_spi_pad_configs[] = {
|
|
[0] = {
|
|
.gpios_num = 3,
|
|
.gpios = (struct stm_pad_gpio []) {
|
|
STM_PAD_PIO_OUT(2, 0, 1), /* SCK */
|
|
STM_PAD_PIO_OUT(2, 1, 1), /* MOSI */
|
|
STM_PAD_PIO_IN(2, 2, -1), /* MISO */
|
|
},
|
|
.sysconfs_num = 2,
|
|
.sysconfs = (struct stm_pad_sysconf []) {
|
|
/* SSC0_MUX_SEL = 0 (default assignment) */
|
|
STM_PAD_SYS_CFG(7, 0, 0, 0),
|
|
/* !!FIXME!! For some reason, nand_rb signal (PIO2[7])
|
|
* must be disabled for SSC0/SPI to get input.
|
|
* CONF_PAD_NAND_FLASH = 0 */
|
|
STM_PAD_SYS_CFG(7, 15, 15, 0),
|
|
},
|
|
},
|
|
[1] = {
|
|
.gpios_num = 3,
|
|
.gpios = (struct stm_pad_gpio []) {
|
|
STM_PAD_PIO_OUT(3, 0, 1), /* SCK */
|
|
STM_PAD_PIO_OUT(3, 1, 1), /* MOSI */
|
|
STM_PAD_PIO_IN(3, 2, -1), /* MISO */
|
|
},
|
|
.sysconfs_num = 1,
|
|
.sysconfs = (struct stm_pad_sysconf []) {
|
|
/* SSC1_MUX_SEL = 0 (default assignment) */
|
|
STM_PAD_SYS_CFG(7, 1, 1, 0),
|
|
},
|
|
},
|
|
[3] = {
|
|
.gpios_num = 3,
|
|
.gpios = (struct stm_pad_gpio []) {
|
|
STM_PAD_PIO_OUT(5, 0, 1), /* SCK */
|
|
STM_PAD_PIO_OUT(5, 1, 1), /* MOSI */
|
|
STM_PAD_PIO_IN(5, 2, -1), /* MISO */
|
|
},
|
|
.sysconfs_num = 1,
|
|
.sysconfs = (struct stm_pad_sysconf []) {
|
|
/* SSC3_MUX_SEL = 0 (separate PIOs) */
|
|
STM_PAD_SYS_CFG(7, 3, 3, 0),
|
|
},
|
|
},
|
|
};
|
|
|
|
static struct platform_device stx7200_ssc_devices[] = {
|
|
[0] = {
|
|
/* .name & .id set in stx7200_configure_ssc_*() */
|
|
.num_resources = 2,
|
|
.resource = (struct resource[]) {
|
|
STM_PLAT_RESOURCE_MEM(0xfd040000, 0x110),
|
|
STM_PLAT_RESOURCE_IRQ(ILC_IRQ(108), -1),
|
|
},
|
|
.dev.platform_data = &(struct stm_plat_ssc_data) {
|
|
/* .pad_config_* set in stx7200_configure_ssc_*() */
|
|
},
|
|
},
|
|
[1] = {
|
|
/* .name & .id set in stx7200_configure_ssc_*() */
|
|
.num_resources = 2,
|
|
.resource = (struct resource[]) {
|
|
STM_PLAT_RESOURCE_MEM(0xfd041000, 0x110),
|
|
STM_PLAT_RESOURCE_IRQ(ILC_IRQ(109), -1),
|
|
},
|
|
.dev.platform_data = &(struct stm_plat_ssc_data) {
|
|
/* .pad_config_* set in stx7200_configure_ssc_*() */
|
|
},
|
|
},
|
|
[2] = {
|
|
/* .name & .id set in stx7200_configure_ssc_*() */
|
|
.num_resources = 2,
|
|
.resource = (struct resource[]) {
|
|
STM_PLAT_RESOURCE_MEM(0xfd042000, 0x110),
|
|
STM_PLAT_RESOURCE_IRQ(ILC_IRQ(110), -1),
|
|
},
|
|
.dev.platform_data = &(struct stm_plat_ssc_data) {
|
|
/* .pad_config_* set in stx7200_configure_ssc_*() */
|
|
},
|
|
},
|
|
[3] = {
|
|
/* .name & .id set in stx7200_configure_ssc_*() */
|
|
.num_resources = 2,
|
|
.resource = (struct resource[]) {
|
|
STM_PLAT_RESOURCE_MEM(0xfd043000, 0x110),
|
|
STM_PLAT_RESOURCE_IRQ(ILC_IRQ(111), -1),
|
|
},
|
|
.dev.platform_data = &(struct stm_plat_ssc_data) {
|
|
/* .pad_config_* set in stx7200_configure_ssc_*() */
|
|
},
|
|
},
|
|
[4] = {
|
|
/* .name & .id set in stx7200_configure_ssc_*() */
|
|
.num_resources = 2,
|
|
.resource = (struct resource[]) {
|
|
STM_PLAT_RESOURCE_MEM(0xfd044000, 0x110),
|
|
STM_PLAT_RESOURCE_IRQ(ILC_IRQ(112), -1),
|
|
},
|
|
.dev.platform_data = &(struct stm_plat_ssc_data) {
|
|
/* .pad_config_* set in stx7200_configure_ssc_*() */
|
|
},
|
|
},
|
|
};
|
|
|
|
static int __initdata stx7200_ssc_configured[ARRAY_SIZE(stx7200_ssc_devices)];
|
|
|
|
int __init stx7200_configure_ssc_i2c(int ssc)
|
|
{
|
|
static int i2c_busnum;
|
|
struct stm_plat_ssc_data *plat_data;
|
|
|
|
BUG_ON(ssc < 0 || ssc >= ARRAY_SIZE(stx7200_ssc_devices));
|
|
|
|
BUG_ON(stx7200_ssc_configured[ssc]);
|
|
stx7200_ssc_configured[ssc] = 1;
|
|
|
|
stx7200_ssc_devices[ssc].name = "i2c-stm";
|
|
stx7200_ssc_devices[ssc].id = i2c_busnum;
|
|
|
|
plat_data = stx7200_ssc_devices[ssc].dev.platform_data;
|
|
plat_data->pad_config = &stx7200_ssc_i2c_pad_configs[ssc];
|
|
|
|
/* I2C bus number reservation (to prevent any hot-plug device
|
|
* from using it) */
|
|
i2c_register_board_info(i2c_busnum, NULL, 0);
|
|
|
|
platform_device_register(&stx7200_ssc_devices[ssc]);
|
|
|
|
return i2c_busnum++;
|
|
}
|
|
|
|
int __init stx7200_configure_ssc_spi(int ssc,
|
|
struct stx7200_ssc_spi_config *config)
|
|
{
|
|
static int spi_busnum;
|
|
struct stm_plat_ssc_data *plat_data;
|
|
|
|
BUG_ON(ssc < 0 || ssc >= ARRAY_SIZE(stx7200_ssc_devices));
|
|
|
|
BUG_ON(stx7200_ssc_configured[ssc]);
|
|
stx7200_ssc_configured[ssc] = 1;
|
|
|
|
/* These two SSC can't be used in SPI mode - there is no
|
|
* MRST pin available */
|
|
BUG_ON(ssc == 2 || ssc == 4);
|
|
|
|
stx7200_ssc_devices[ssc].name = "spi-stm";
|
|
stx7200_ssc_devices[ssc].id = spi_busnum;
|
|
|
|
plat_data = stx7200_ssc_devices[ssc].dev.platform_data;
|
|
if (config)
|
|
plat_data->spi_chipselect = config->chipselect;
|
|
plat_data->pad_config = &stx7200_ssc_spi_pad_configs[ssc];
|
|
|
|
platform_device_register(&stx7200_ssc_devices[ssc]);
|
|
|
|
return spi_busnum++;
|
|
}
|
|
|
|
|
|
|
|
/* LiRC resources --------------------------------------------------------- */
|
|
|
|
static struct platform_device stx7200_lirc_device = {
|
|
.name = "lirc-stm",
|
|
.id = -1,
|
|
.num_resources = 2,
|
|
.resource = (struct resource []) {
|
|
STM_PLAT_RESOURCE_MEM(0xfd018000, 0x234),
|
|
STM_PLAT_RESOURCE_IRQ(ILC_IRQ(116), -1),
|
|
},
|
|
.dev.platform_data = &(struct stm_plat_lirc_data) {
|
|
/* The clock settings will be calculated by
|
|
* the driver from the system clock */
|
|
.irbclock = 0, /* use current_cpu data */
|
|
.irbclkdiv = 0, /* automatically calculate */
|
|
.irbperiodmult = 0,
|
|
.irbperioddiv = 0,
|
|
.irbontimemult = 0,
|
|
.irbontimediv = 0,
|
|
.irbrxmaxperiod = 0x5000,
|
|
.sysclkdiv = 1,
|
|
.rxpolarity = 1,
|
|
},
|
|
};
|
|
|
|
void __init stx7200_configure_lirc(struct stx7200_lirc_config *config)
|
|
{
|
|
static int configured;
|
|
struct stx7200_lirc_config default_config = {};
|
|
struct stm_plat_lirc_data *plat_data =
|
|
stx7200_lirc_device.dev.platform_data;
|
|
struct stm_pad_config *pad_config;
|
|
|
|
BUG_ON(configured);
|
|
configured = 1;
|
|
|
|
if (!config)
|
|
config = &default_config;
|
|
|
|
pad_config = stm_pad_config_alloc(3, 1);
|
|
BUG_ON(!pad_config);
|
|
|
|
plat_data->txenabled = config->tx_enabled || config->tx_od_enabled;
|
|
plat_data->pads = pad_config;
|
|
|
|
switch (config->rx_mode) {
|
|
case stx7200_lirc_rx_disabled:
|
|
/* Nothing to do */
|
|
break;
|
|
case stx7200_lirc_rx_mode_ir:
|
|
plat_data->rxuhfmode = 0;
|
|
stm_pad_config_add_pio_in(pad_config, 3, 3, -1);
|
|
break;
|
|
case stx7200_lirc_rx_mode_uhf:
|
|
plat_data->rxuhfmode = 1;
|
|
stm_pad_config_add_pio_in(pad_config, 3, 4, -1);
|
|
break;
|
|
default:
|
|
BUG();
|
|
break;
|
|
}
|
|
|
|
if (config->tx_enabled)
|
|
stm_pad_config_add_pio_out(pad_config, 3, 5, 1);
|
|
|
|
if (config->tx_od_enabled) {
|
|
stm_pad_config_add_pio_out(pad_config, 3, 6, 1);
|
|
stm_pad_config_add_sys_cfg(pad_config, 20, 21, 21, 1);
|
|
};
|
|
|
|
platform_device_register(&stx7200_lirc_device);
|
|
}
|
|
|
|
|
|
|
|
/* PWM resources ---------------------------------------------------------- */
|
|
|
|
static struct stm_plat_pwm_data stx7200_pwm_platform_data = {
|
|
.channel_pad_config = {
|
|
[0] = &(struct stm_pad_config) {
|
|
.gpios_num = 1,
|
|
.gpios = (struct stm_pad_gpio []) {
|
|
STM_PAD_PIO_OUT(4, 6, 1),
|
|
},
|
|
.sysconfs_num = 1,
|
|
.sysconfs = (struct stm_pad_sysconf []) {
|
|
/* Route UART2 and PWM_OUT0 instead of
|
|
* SCI to pins: SSC2_MUX_SEL = 0 */
|
|
STM_PAD_SYS_CFG(7, 2, 2, 0),
|
|
},
|
|
},
|
|
[1] = &(struct stm_pad_config) {
|
|
.gpios_num = 1,
|
|
.gpios = (struct stm_pad_gpio []) {
|
|
STM_PAD_PIO_OUT(4, 7, 1),
|
|
},
|
|
},
|
|
},
|
|
};
|
|
|
|
static struct platform_device stx7200_pwm_device = {
|
|
.name = "stm-pwm",
|
|
.id = -1,
|
|
.num_resources = 2,
|
|
.resource = (struct resource[]) {
|
|
STM_PLAT_RESOURCE_MEM(0xfd010000, 0x68),
|
|
STM_PLAT_RESOURCE_IRQ(ILC_IRQ(114), -1),
|
|
},
|
|
.dev.platform_data = &stx7200_pwm_platform_data,
|
|
};
|
|
|
|
void __init stx7200_configure_pwm(struct stx7200_pwm_config *config)
|
|
{
|
|
static int configured;
|
|
|
|
BUG_ON(configured);
|
|
configured = 1;
|
|
|
|
if (config) {
|
|
stx7200_pwm_platform_data.channel_enabled[0] =
|
|
config->out0_enabled;
|
|
stx7200_pwm_platform_data.channel_enabled[1] =
|
|
config->out1_enabled;
|
|
}
|
|
|
|
platform_device_register(&stx7200_pwm_device);
|
|
}
|
|
|
|
/* Low Power Controller ---------------------------------------------------- */
|
|
|
|
static struct platform_device stx7200_lpc_device = {
|
|
.name = "stm-rtc",
|
|
.id = -1,
|
|
.num_resources = 2,
|
|
.resource = (struct resource[]){
|
|
STM_PLAT_RESOURCE_MEM(0xfd008000, 0x600),
|
|
STM_PLAT_RESOURCE_IRQ(ILC_IRQ(120), -1),
|
|
},
|
|
.dev.platform_data = &(struct stm_plat_rtc_lpc) {
|
|
.clk_id = "CLKB_LPC",
|
|
.need_wdt_reset = 1,
|
|
.irq_edge_level = IRQ_TYPE_EDGE_FALLING,
|
|
}
|
|
};
|
|
|
|
static int __init stx7200_add_lpc(void)
|
|
{
|
|
return platform_device_register(&stx7200_lpc_device);
|
|
}
|
|
|
|
module_init(stx7200_add_lpc);
|