satip-axe/kernel/drivers/scsi/bfa/include/bfi/bfi_fcpim.h
2015-03-26 17:24:57 +01:00

302 lines
8.6 KiB
C

/*
* Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
* All rights reserved
* www.brocade.com
*
* Linux driver for Brocade Fibre Channel Host Bus Adapter.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License (GPL) Version 2 as
* published by the Free Software Foundation
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*/
#ifndef __BFI_FCPIM_H__
#define __BFI_FCPIM_H__
#include "bfi.h"
#include <protocol/fcp.h>
#pragma pack(1)
/*
* Initiator mode I-T nexus interface defines.
*/
enum bfi_itnim_h2i {
BFI_ITNIM_H2I_CREATE_REQ = 1, /* i-t nexus creation */
BFI_ITNIM_H2I_DELETE_REQ = 2, /* i-t nexus deletion */
};
enum bfi_itnim_i2h {
BFI_ITNIM_I2H_CREATE_RSP = BFA_I2HM(1),
BFI_ITNIM_I2H_DELETE_RSP = BFA_I2HM(2),
BFI_ITNIM_I2H_SLER_EVENT = BFA_I2HM(3),
};
struct bfi_itnim_create_req_s {
struct bfi_mhdr_s mh; /* common msg header */
u16 fw_handle; /* f/w handle for itnim */
u8 class; /* FC class for IO */
u8 seq_rec; /* sequence recovery support */
u8 msg_no; /* seq id of the msg */
};
struct bfi_itnim_create_rsp_s {
struct bfi_mhdr_s mh; /* common msg header */
u16 bfa_handle; /* bfa handle for itnim */
u8 status; /* fcp request status */
u8 seq_id; /* seq id of the msg */
};
struct bfi_itnim_delete_req_s {
struct bfi_mhdr_s mh; /* common msg header */
u16 fw_handle; /* f/w itnim handle */
u8 seq_id; /* seq id of the msg */
u8 rsvd;
};
struct bfi_itnim_delete_rsp_s {
struct bfi_mhdr_s mh; /* common msg header */
u16 bfa_handle; /* bfa handle for itnim */
u8 status; /* fcp request status */
u8 seq_id; /* seq id of the msg */
};
struct bfi_itnim_sler_event_s {
struct bfi_mhdr_s mh; /* common msg header */
u16 bfa_handle; /* bfa handle for itnim */
u16 rsvd;
};
union bfi_itnim_h2i_msg_u {
struct bfi_itnim_create_req_s *create_req;
struct bfi_itnim_delete_req_s *delete_req;
struct bfi_msg_s *msg;
};
union bfi_itnim_i2h_msg_u {
struct bfi_itnim_create_rsp_s *create_rsp;
struct bfi_itnim_delete_rsp_s *delete_rsp;
struct bfi_itnim_sler_event_s *sler_event;
struct bfi_msg_s *msg;
};
/*
* Initiator mode IO interface defines.
*/
enum bfi_ioim_h2i {
BFI_IOIM_H2I_IOABORT_REQ = 1, /* IO abort request */
BFI_IOIM_H2I_IOCLEANUP_REQ = 2, /* IO cleanup request */
};
enum bfi_ioim_i2h {
BFI_IOIM_I2H_IO_RSP = BFA_I2HM(1), /* non-fp IO response */
BFI_IOIM_I2H_IOABORT_RSP = BFA_I2HM(2),/* ABORT rsp */
};
/**
* IO command DIF info
*/
struct bfi_ioim_dif_s {
u32 dif_info[4];
};
/**
* FCP IO messages overview
*
* @note
* - Max CDB length supported is 64 bytes.
* - SCSI Linked commands and SCSI bi-directional Commands not
* supported.
*
*/
struct bfi_ioim_req_s {
struct bfi_mhdr_s mh; /* Common msg header */
u16 io_tag; /* I/O tag */
u16 rport_hdl; /* itnim/rport firmware handle */
struct fcp_cmnd_s cmnd; /* IO request info */
/**
* SG elements array within the IO request must be double word
* aligned. This aligment is required to optimize SGM setup for the IO.
*/
struct bfi_sge_s sges[BFI_SGE_INLINE_MAX];
u8 io_timeout;
u8 dif_en;
u8 rsvd_a[2];
struct bfi_ioim_dif_s dif;
};
/**
* This table shows various IO status codes from firmware and their
* meaning. Host driver can use these status codes to further process
* IO completions.
*
* BFI_IOIM_STS_OK : IO completed with error free SCSI &
* transport status.
* - io-tag can be reused.
*
* BFA_IOIM_STS_SCSI_ERR : IO completed with scsi error.
* - io-tag can be reused.
*
* BFI_IOIM_STS_HOST_ABORTED : IO was aborted successfully due to
* host request.
* - io-tag cannot be reused yet.
*
* BFI_IOIM_STS_ABORTED : IO was aborted successfully
* internally by f/w.
* - io-tag cannot be reused yet.
*
* BFI_IOIM_STS_TIMEDOUT : IO timedout and ABTS/RRQ is happening
* in the firmware and
* - io-tag cannot be reused yet.
*
* BFI_IOIM_STS_SQER_NEEDED : Firmware could not recover the IO
* with sequence level error
* logic and hence host needs to retry
* this IO with a different IO tag
* - io-tag cannot be used yet.
*
* BFI_IOIM_STS_NEXUS_ABORT : Second Level Error Recovery from host
* is required because 2 consecutive ABTS
* timedout and host needs logout and
* re-login with the target
* - io-tag cannot be used yet.
*
* BFI_IOIM_STS_UNDERRUN : IO completed with SCSI status good,
* but the data tranferred is less than
* the fcp data length in the command.
* ex. SCSI INQUIRY where transferred
* data length and residue count in FCP
* response accounts for total fcp-dl
* - io-tag can be reused.
*
* BFI_IOIM_STS_OVERRUN : IO completed with SCSI status good,
* but the data transerred is more than
* fcp data length in the command. ex.
* TAPE IOs where blocks can of unequal
* lengths.
* - io-tag can be reused.
*
* BFI_IOIM_STS_RES_FREE : Firmware has completed using io-tag
* during abort process
* - io-tag can be reused.
*
* BFI_IOIM_STS_PROTO_ERR : Firmware detected a protocol error.
* ex target sent more data than
* requested, or there was data frame
* loss and other reasons
* - io-tag cannot be used yet.
*
* BFI_IOIM_STS_DIF_ERR : Firwmare detected DIF error. ex: DIF
* CRC err or Ref Tag err or App tag err.
* - io-tag can be reused.
*
* BFA_IOIM_STS_TSK_MGT_ABORT : IO was aborted because of Task
* Management command from the host
* - io-tag can be reused.
*
* BFI_IOIM_STS_UTAG : Firmware does not know about this
* io_tag.
* - io-tag can be reused.
*/
enum bfi_ioim_status {
BFI_IOIM_STS_OK = 0,
BFI_IOIM_STS_HOST_ABORTED = 1,
BFI_IOIM_STS_ABORTED = 2,
BFI_IOIM_STS_TIMEDOUT = 3,
BFI_IOIM_STS_RES_FREE = 4,
BFI_IOIM_STS_SQER_NEEDED = 5,
BFI_IOIM_STS_PROTO_ERR = 6,
BFI_IOIM_STS_UTAG = 7,
BFI_IOIM_STS_PATHTOV = 8,
};
#define BFI_IOIM_SNSLEN (256)
/**
* I/O response message
*/
struct bfi_ioim_rsp_s {
struct bfi_mhdr_s mh; /* common msg header */
u16 io_tag; /* completed IO tag */
u16 bfa_rport_hndl; /* releated rport handle */
u8 io_status; /* IO completion status */
u8 reuse_io_tag; /* IO tag can be reused */
u16 abort_tag; /* host abort request tag */
u8 scsi_status; /* scsi status from target */
u8 sns_len; /* scsi sense length */
u8 resid_flags; /* IO residue flags */
u8 rsvd_a;
u32 residue; /* IO residual length in bytes */
u32 rsvd_b[3];
};
struct bfi_ioim_abort_req_s {
struct bfi_mhdr_s mh; /* Common msg header */
u16 io_tag; /* I/O tag */
u16 abort_tag; /* unique request tag */
};
/*
* Initiator mode task management command interface defines.
*/
enum bfi_tskim_h2i {
BFI_TSKIM_H2I_TM_REQ = 1, /* task-mgmt command */
BFI_TSKIM_H2I_ABORT_REQ = 2, /* task-mgmt command */
};
enum bfi_tskim_i2h {
BFI_TSKIM_I2H_TM_RSP = BFA_I2HM(1),
};
struct bfi_tskim_req_s {
struct bfi_mhdr_s mh; /* Common msg header */
u16 tsk_tag; /* task management tag */
u16 itn_fhdl; /* itn firmware handle */
lun_t lun; /* LU number */
u8 tm_flags; /* see fcp_tm_cmnd_t */
u8 t_secs; /* Timeout value in seconds */
u8 rsvd[2];
};
struct bfi_tskim_abortreq_s {
struct bfi_mhdr_s mh; /* Common msg header */
u16 tsk_tag; /* task management tag */
u16 rsvd;
};
enum bfi_tskim_status {
/*
* Following are FCP-4 spec defined status codes,
* **DO NOT CHANGE THEM **
*/
BFI_TSKIM_STS_OK = 0,
BFI_TSKIM_STS_NOT_SUPP = 4,
BFI_TSKIM_STS_FAILED = 5,
/**
* Defined by BFA
*/
BFI_TSKIM_STS_TIMEOUT = 10, /* TM request timedout */
BFI_TSKIM_STS_ABORTED = 11, /* Aborted on host request */
};
struct bfi_tskim_rsp_s {
struct bfi_mhdr_s mh; /* Common msg header */
u16 tsk_tag; /* task mgmt cmnd tag */
u8 tsk_status; /* @ref bfi_tskim_status */
u8 rsvd;
};
#pragma pack()
#endif /* __BFI_FCPIM_H__ */