satip-axe/kernel/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/usb.txt
2015-03-26 17:24:57 +01:00

38 lines
1.4 KiB
Plaintext

Freescale QUICC Engine USB Controller
Required properties:
- compatible : should be "fsl,<chip>-qe-usb", "fsl,mpc8323-qe-usb".
- reg : the first two cells should contain usb registers location and
length, the next two two cells should contain PRAM location and
length.
- interrupts : should contain USB interrupt.
- interrupt-parent : interrupt source phandle.
- fsl,fullspeed-clock : specifies the full speed USB clock source:
"none": clock source is disabled
"brg1" through "brg16": clock source is BRG1-BRG16, respectively
"clk1" through "clk24": clock source is CLK1-CLK24, respectively
- fsl,lowspeed-clock : specifies the low speed USB clock source:
"none": clock source is disabled
"brg1" through "brg16": clock source is BRG1-BRG16, respectively
"clk1" through "clk24": clock source is CLK1-CLK24, respectively
- hub-power-budget : USB power budget for the root hub, in mA.
- gpios : should specify GPIOs in this order: USBOE, USBTP, USBTN, USBRP,
USBRN, SPEED (optional), and POWER (optional).
Example:
usb@6c0 {
compatible = "fsl,mpc8360-qe-usb", "fsl,mpc8323-qe-usb";
reg = <0x6c0 0x40 0x8b00 0x100>;
interrupts = <11>;
interrupt-parent = <&qeic>;
fsl,fullspeed-clock = "clk21";
gpios = <&qe_pio_b 2 0 /* USBOE */
&qe_pio_b 3 0 /* USBTP */
&qe_pio_b 8 0 /* USBTN */
&qe_pio_b 9 0 /* USBRP */
&qe_pio_b 11 0 /* USBRN */
&qe_pio_e 20 0 /* SPEED */
&qe_pio_e 21 0 /* POWER */>;
};