satip-axe/fs-add/etc/config.default
2015-08-04 18:38:54 +02:00

85 lines
1.1 KiB
Plaintext

#
# SATIP AXE firmware configuration
#
CFGVER="10"
HOSTNAME="satip-axe"
KMODULES="drivers/usb/serial/cp210x.ko drivers/usb/serial/pl2303.ko drivers/usb/serial/ftdi_sio.ko"
#
# STV6210 baseband amplifier gain (0dB .. 16dB - 2dB step)
#
STV6210_BAMP="16dB"
#DEMUXTS_OLD="yes"
#
# ttyUSB names
#
TTYUSB1_DEV="2-1:1.0"
TTYUSB1_NAME="ttyUSBupper"
TTYUSB2_DEV="4-1:1.0"
TTYUSB2_NAME="ttyUSBlower"
TTYUSB3_DEV="1-1.1:1.0" # USB hub port#1 in upper port
TTYUSB3_NAME="ttyUSBupper1"
TTYUSB4_DEV="3-1.2:1.0" # USB hub port#2 in lower port
TTYUSB4_NAME="ttyUSBlower2"
#
# IPV4 config
#
IPV4="dhcp"
# or
#IPV4="192.168.1.240"
#IPV4_NETMASK="255.255.255.0"
#IPV4_BROADCAST="192.168.1.255"
#IPV4_GATEWAY="192.168.1.1"
#
# ntpd
#
NTPD_OPTS="-p 0.pool.ntp.org"
#
# telnetd
#
TELNETD="yes"
#
# dropbear
#
DROPBEAR="yes"
#
# minisatip
#
MINISATIP="yes"
MINISATIP_OPTS=""
#
# inetd (httpd,ftpd)
#
INETD="yes"
#
# crond
#
CROND="yes"
#
# nfsd v3
#
NFSD="yes"
NFSD_HOTPLUG_EXPORT="*" # replace with host or subnet, '*' = world
#
# oscamd
#
OSCAMD="yes"
#
# custom daemon/service/setup executed from sysinit
#
#CUSTOMD="/etc/sysconfig/myboot"