satip-axe/kernel/arch/m68k/Kconfig
2015-03-26 17:24:57 +01:00

630 lines
19 KiB
Plaintext

#
# For a description of the syntax of this configuration file,
# see Documentation/kbuild/kconfig-language.txt.
#
config M68K
bool
default y
select HAVE_AOUT
select HAVE_IDE
config MMU
bool
default y
config RWSEM_GENERIC_SPINLOCK
bool
default y
config RWSEM_XCHGADD_ALGORITHM
bool
config ARCH_HAS_ILOG2_U32
bool
default n
config ARCH_HAS_ILOG2_U64
bool
default n
config GENERIC_HWEIGHT
bool
default y
config GENERIC_CALIBRATE_DELAY
bool
default y
config TIME_LOW_RES
bool
default y
config GENERIC_IOMAP
bool
default y
config ARCH_MAY_HAVE_PC_FDC
bool
depends on BROKEN && (Q40 || SUN3X)
default y
config NO_IOPORT
def_bool y
config NO_DMA
def_bool SUN3
config HZ
int
default 100
config GENERIC_TIME
def_bool y
config ARCH_USES_GETTIMEOFFSET
def_bool y
mainmenu "Linux/68k Kernel Configuration"
source "init/Kconfig"
source "kernel/Kconfig.freezer"
menu "Platform dependent setup"
config EISA
bool
---help---
The Extended Industry Standard Architecture (EISA) bus was
developed as an open alternative to the IBM MicroChannel bus.
The EISA bus provided some of the features of the IBM MicroChannel
bus while maintaining backward compatibility with cards made for
the older ISA bus. The EISA bus saw limited use between 1988 and
1995 when it was made obsolete by the PCI bus.
Say Y here if you are building a kernel for an EISA-based machine.
Otherwise, say N.
config MCA
bool
help
MicroChannel Architecture is found in some IBM PS/2 machines and
laptops. It is a bus system similar to PCI or ISA. See
<file:Documentation/mca.txt> (and especially the web page given
there) before attempting to build an MCA bus kernel.
config PCMCIA
tristate
---help---
Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
computer. These are credit-card size devices such as network cards,
modems or hard drives often used with laptops computers. There are
actually two varieties of these cards: the older 16 bit PCMCIA cards
and the newer 32 bit CardBus cards. If you want to use CardBus
cards, you need to say Y here and also to "CardBus support" below.
To use your PC-cards, you will need supporting software from David
Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
for location). Please also read the PCMCIA-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as modules, choose M here: the
modules will be called pcmcia_core and ds.
config AMIGA
bool "Amiga support"
select MMU_MOTOROLA if MMU
help
This option enables support for the Amiga series of computers. If
you plan to use this kernel on an Amiga, say Y here and browse the
material available in <file:Documentation/m68k>; otherwise say N.
config ATARI
bool "Atari support"
select MMU_MOTOROLA if MMU
help
This option enables support for the 68000-based Atari series of
computers (including the TT, Falcon and Medusa). If you plan to use
this kernel on an Atari, say Y here and browse the material
available in <file:Documentation/m68k>; otherwise say N.
config MAC
bool "Macintosh support"
select MMU_MOTOROLA if MMU
help
This option enables support for the Apple Macintosh series of
computers (yes, there is experimental support now, at least for part
of the series).
Say N unless you're willing to code the remaining necessary support.
;)
config NUBUS
bool
depends on MAC
default y
config M68K_L2_CACHE
bool
depends on MAC
default y
config APOLLO
bool "Apollo support"
select MMU_MOTOROLA if MMU
help
Say Y here if you want to run Linux on an MC680x0-based Apollo
Domain workstation such as the DN3500.
config VME
bool "VME (Motorola and BVM) support"
select MMU_MOTOROLA if MMU
help
Say Y here if you want to build a kernel for a 680x0 based VME
board. Boards currently supported include Motorola boards MVME147,
MVME162, MVME166, MVME167, MVME172, and MVME177. BVME4000 and
BVME6000 boards from BVM Ltd are also supported.
config MVME147
bool "MVME147 support"
depends on VME
help
Say Y to include support for early Motorola VME boards. This will
build a kernel which can run on MVME147 single-board computers. If
you select this option you will have to select the appropriate
drivers for SCSI, Ethernet and serial ports later on.
config MVME16x
bool "MVME162, 166 and 167 support"
depends on VME
help
Say Y to include support for Motorola VME boards. This will build a
kernel which can run on MVME162, MVME166, MVME167, MVME172, and
MVME177 boards. If you select this option you will have to select
the appropriate drivers for SCSI, Ethernet and serial ports later
on.
config BVME6000
bool "BVME4000 and BVME6000 support"
depends on VME
help
Say Y to include support for VME boards from BVM Ltd. This will
build a kernel which can run on BVME4000 and BVME6000 boards. If
you select this option you will have to select the appropriate
drivers for SCSI, Ethernet and serial ports later on.
config HP300
bool "HP9000/300 and HP9000/400 support"
select MMU_MOTOROLA if MMU
help
This option enables support for the HP9000/300 and HP9000/400 series
of workstations. Support for these machines is still somewhat
experimental. If you plan to try to use the kernel on such a machine
say Y here.
Everybody else says N.
config DIO
bool "DIO bus support"
depends on HP300
default y
help
Say Y here to enable support for the "DIO" expansion bus used in
HP300 machines. If you are using such a system you almost certainly
want this.
config SUN3X
bool "Sun3x support"
select MMU_MOTOROLA if MMU
select M68030
help
This option enables support for the Sun 3x series of workstations.
Be warned that this support is very experimental.
Note that Sun 3x kernels are not compatible with Sun 3 hardware.
General Linux information on the Sun 3x series (now discontinued)
is at <http://www.angelfire.com/ca2/tech68k/sun3.html>.
If you don't want to compile a kernel for a Sun 3x, say N.
config Q40
bool "Q40/Q60 support"
select MMU_MOTOROLA if MMU
help
The Q40 is a Motorola 68040-based successor to the Sinclair QL
manufactured in Germany. There is an official Q40 home page at
<http://www.q40.de/>. This option enables support for the Q40 and
Q60. Select your CPU below. For 68LC060 don't forget to enable FPU
emulation.
config SUN3
bool "Sun3 support"
depends on !MMU_MOTOROLA
select MMU_SUN3 if MMU
select M68020
help
This option enables support for the Sun 3 series of workstations
(3/50, 3/60, 3/1xx, 3/2xx systems). Enabling this option requires
that all other hardware types must be disabled, as Sun 3 kernels
are incompatible with all other m68k targets (including Sun 3x!).
If you don't want to compile a kernel exclusively for a Sun 3, say N.
comment "Processor type"
config M68020
bool "68020 support"
help
If you anticipate running this kernel on a computer with a MC68020
processor, say Y. Otherwise, say N. Note that the 68020 requires a
68851 MMU (Memory Management Unit) to run Linux/m68k, except on the
Sun 3, which provides its own version.
config M68030
bool "68030 support"
depends on !MMU_SUN3
help
If you anticipate running this kernel on a computer with a MC68030
processor, say Y. Otherwise, say N. Note that a MC68EC030 will not
work, as it does not include an MMU (Memory Management Unit).
config M68040
bool "68040 support"
depends on !MMU_SUN3
help
If you anticipate running this kernel on a computer with a MC68LC040
or MC68040 processor, say Y. Otherwise, say N. Note that an
MC68EC040 will not work, as it does not include an MMU (Memory
Management Unit).
config M68060
bool "68060 support"
depends on !MMU_SUN3
help
If you anticipate running this kernel on a computer with a MC68060
processor, say Y. Otherwise, say N.
config MMU_MOTOROLA
bool
config MMU_SUN3
bool
depends on MMU && !MMU_MOTOROLA
config M68KFPU_EMU
bool "Math emulation support (EXPERIMENTAL)"
depends on EXPERIMENTAL
help
At some point in the future, this will cause floating-point math
instructions to be emulated by the kernel on machines that lack a
floating-point math coprocessor. Thrill-seekers and chronically
sleep-deprived psychotic hacker types can say Y now, everyone else
should probably wait a while.
config M68KFPU_EMU_EXTRAPREC
bool "Math emulation extra precision"
depends on M68KFPU_EMU
help
The fpu uses normally a few bit more during calculations for
correct rounding, the emulator can (often) do the same but this
extra calculation can cost quite some time, so you can disable
it here. The emulator will then "only" calculate with a 64 bit
mantissa and round slightly incorrect, what is more than enough
for normal usage.
config M68KFPU_EMU_ONLY
bool "Math emulation only kernel"
depends on M68KFPU_EMU
help
This option prevents any floating-point instructions from being
compiled into the kernel, thereby the kernel doesn't save any
floating point context anymore during task switches, so this
kernel will only be usable on machines without a floating-point
math coprocessor. This makes the kernel a bit faster as no tests
needs to be executed whether a floating-point instruction in the
kernel should be executed or not.
config ADVANCED
bool "Advanced configuration options"
---help---
This gives you access to some advanced options for the CPU. The
defaults should be fine for most users, but these options may make
it possible for you to improve performance somewhat if you know what
you are doing.
Note that the answer to this question won't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about these options.
Most users should say N to this question.
config RMW_INSNS
bool "Use read-modify-write instructions"
depends on ADVANCED
---help---
This allows to use certain instructions that work with indivisible
read-modify-write bus cycles. While this is faster than the
workaround of disabling interrupts, it can conflict with DMA
( = direct memory access) on many Amiga systems, and it is also said
to destabilize other machines. It is very likely that this will
cause serious problems on any Amiga or Atari Medusa if set. The only
configuration where it should work are 68030-based Ataris, where it
apparently improves performance. But you've been warned! Unless you
really know what you are doing, say N. Try Y only if you're quite
adventurous.
config SINGLE_MEMORY_CHUNK
bool "Use one physical chunk of memory only" if ADVANCED && !SUN3
default y if SUN3
select NEED_MULTIPLE_NODES
help
Ignore all but the first contiguous chunk of physical memory for VM
purposes. This will save a few bytes kernel size and may speed up
some operations. Say N if not sure.
config 060_WRITETHROUGH
bool "Use write-through caching for 68060 supervisor accesses"
depends on ADVANCED && M68060
---help---
The 68060 generally uses copyback caching of recently accessed data.
Copyback caching means that memory writes will be held in an on-chip
cache and only written back to memory some time later. Saying Y
here will force supervisor (kernel) accesses to use writethrough
caching. Writethrough caching means that data is written to memory
straight away, so that cache and memory data always agree.
Writethrough caching is less efficient, but is needed for some
drivers on 68060 based systems where the 68060 bus snooping signal
is hardwired on. The 53c710 SCSI driver is known to suffer from
this problem.
config ARCH_DISCONTIGMEM_ENABLE
def_bool !SINGLE_MEMORY_CHUNK
config NODES_SHIFT
int
default "3"
depends on !SINGLE_MEMORY_CHUNK
source "mm/Kconfig"
endmenu
menu "General setup"
source "fs/Kconfig.binfmt"
config ZORRO
bool "Amiga Zorro (AutoConfig) bus support"
depends on AMIGA
help
This enables support for the Zorro bus in the Amiga. If you have
expansion cards in your Amiga that conform to the Amiga
AutoConfig(tm) specification, say Y, otherwise N. Note that even
expansion cards that do not fit in the Zorro slots but fit in e.g.
the CPU slot may fall in this category, so you have to say Y to let
Linux use these.
config AMIGA_PCMCIA
bool "Amiga 1200/600 PCMCIA support (EXPERIMENTAL)"
depends on AMIGA && EXPERIMENTAL
help
Include support in the kernel for pcmcia on Amiga 1200 and Amiga
600. If you intend to use pcmcia cards say Y; otherwise say N.
config STRAM_PROC
bool "ST-RAM statistics in /proc"
depends on ATARI
help
Say Y here to report ST-RAM usage statistics in /proc/stram.
config HEARTBEAT
bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || MAC ||Q40
default y if !AMIGA && !APOLLO && !ATARI && !MAC && !Q40 && HP300
help
Use the power-on LED on your machine as a load meter. The exact
behavior is platform-dependent, but normally the flash frequency is
a hyperbolic function of the 5-minute load average.
# We have a dedicated heartbeat LED. :-)
config PROC_HARDWARE
bool "/proc/hardware support"
help
Say Y here to support the /proc/hardware file, which gives you
access to information about the machine you're running on,
including the model, CPU, MMU, clock speed, BogoMIPS rating,
and memory size.
config ISA
bool
depends on Q40 || AMIGA_PCMCIA || GG2
default y
help
Find out whether you have ISA slots on your motherboard. ISA is the
name of a bus system, i.e. the way the CPU talks to the other stuff
inside your box. Other bus systems are PCI, EISA, MicroChannel
(MCA) or VESA. ISA is an older system, now being displaced by PCI;
newer boards don't support it. If you have ISA, say Y, otherwise N.
config GENERIC_ISA_DMA
bool
depends on Q40 || AMIGA_PCMCIA || GG2
default y
config ZONE_DMA
bool
default y
source "drivers/pci/Kconfig"
source "drivers/zorro/Kconfig"
endmenu
source "net/Kconfig"
source "drivers/Kconfig"
menu "Character devices"
config ATARI_MFPSER
tristate "Atari MFP serial support"
depends on ATARI
---help---
If you like to use the MFP serial ports ("Modem1", "Serial1") under
Linux, say Y. The driver equally supports all kinds of MFP serial
ports and automatically detects whether Serial1 is available.
To compile this driver as a module, choose M here.
Note for Falcon users: You also have an MFP port, it's just not
wired to the outside... But you could use the port under Linux.
config ATARI_MIDI
tristate "Atari MIDI serial support"
depends on ATARI
help
If you want to use your Atari's MIDI port in Linux, say Y.
To compile this driver as a module, choose M here.
config ATARI_DSP56K
tristate "Atari DSP56k support (EXPERIMENTAL)"
depends on ATARI && EXPERIMENTAL
help
If you want to be able to use the DSP56001 in Falcons, say Y. This
driver is still experimental, and if you don't know what it is, or
if you don't have this processor, just say N.
To compile this driver as a module, choose M here.
config AMIGA_BUILTIN_SERIAL
tristate "Amiga builtin serial support"
depends on AMIGA
help
If you want to use your Amiga's built-in serial port in Linux,
answer Y.
To compile this driver as a module, choose M here.
config MULTIFACE_III_TTY
tristate "Multiface Card III serial support"
depends on AMIGA
help
If you want to use a Multiface III card's serial port in Linux,
answer Y.
To compile this driver as a module, choose M here.
config GVPIOEXT
tristate "GVP IO-Extender support"
depends on PARPORT=n && ZORRO
help
If you want to use a GVP IO-Extender serial card in Linux, say Y.
Otherwise, say N.
config GVPIOEXT_LP
tristate "GVP IO-Extender parallel printer support"
depends on GVPIOEXT
help
Say Y to enable driving a printer from the parallel port on your
GVP IO-Extender card, N otherwise.
config GVPIOEXT_PLIP
tristate "GVP IO-Extender PLIP support"
depends on GVPIOEXT
help
Say Y to enable doing IP over the parallel port on your GVP
IO-Extender card, N otherwise.
config MAC_SCC
tristate "Macintosh serial support"
depends on MAC
config MAC_HID
bool
depends on INPUT_ADBHID
default y
config HPDCA
tristate "HP DCA serial support"
depends on DIO && SERIAL_8250
help
If you want to use the internal "DCA" serial ports on an HP300
machine, say Y here.
config HPAPCI
tristate "HP APCI serial support"
depends on HP300 && SERIAL_8250 && EXPERIMENTAL
help
If you want to use the internal "APCI" serial ports on an HP400
machine, say Y here.
config MVME147_SCC
bool "SCC support for MVME147 serial ports"
depends on MVME147 && BROKEN
help
This is the driver for the serial ports on the Motorola MVME147
boards. Everyone using one of these boards should say Y here.
config SERIAL167
bool "CD2401 support for MVME166/7 serial ports"
depends on MVME16x
help
This is the driver for the serial ports on the Motorola MVME166,
167, and 172 boards. Everyone using one of these boards should say
Y here.
config MVME162_SCC
bool "SCC support for MVME162 serial ports"
depends on MVME16x && BROKEN
help
This is the driver for the serial ports on the Motorola MVME162 and
172 boards. Everyone using one of these boards should say Y here.
config BVME6000_SCC
bool "SCC support for BVME6000 serial ports"
depends on BVME6000 && BROKEN
help
This is the driver for the serial ports on the BVME4000 and BVME6000
boards from BVM Ltd. Everyone using one of these boards should say
Y here.
config DN_SERIAL
bool "Support for DN serial port (dummy)"
depends on APOLLO
config SERIAL_CONSOLE
bool "Support for serial port console"
depends on (AMIGA || ATARI || MAC || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_MIDI=y || MAC_SCC=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL)
---help---
If you say Y here, it will be possible to use a serial port as the
system console (the system console is the device which receives all
kernel messages and warnings and which allows logins in single user
mode). This could be useful if some terminal or printer is connected
to that serial port.
Even if you say Y here, the currently visible virtual console
(/dev/tty0) will still be used as the system console by default, but
you can alter that using a kernel command line option such as
"console=ttyS1". (Try "man bootparam" or see the documentation of
your boot loader (lilo or loadlin) about how to pass options to the
kernel at boot time.)
If you don't have a VGA card installed and you say Y here, the
kernel will automatically use the first serial line, /dev/ttyS0, as
system console.
If unsure, say N.
endmenu
source "fs/Kconfig"
source "arch/m68k/Kconfig.debug"
source "security/Kconfig"
source "crypto/Kconfig"
source "lib/Kconfig"