frodovdr/satip-axe
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
e2155eb2e0
satip-axe/kernel/sound/stm/pcm_player.c
Jaroslav Kysela e9070cdc77 add idl4k kernel firmware version 1.13.0.105
2015-03-26 17:24:57 +01:00

1144 lines
32 KiB
C
Raw Blame History

/*
* STMicroelectronics System-on-Chips' PCM player driver
*
* Copyright (c) 2005-2011 STMicroelectronics Limited
*
* Author: Pawel Moll <pawel.moll@st.com>
* Mark Glaisher
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <asm/cacheflush.h>
#include <asm/clock.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/stm/pad.h>
#include <linux/stm/stm-dma.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/control.h>
#include <sound/info.h>
#include <sound/pcm_params.h>
#include "common.h"
#include "reg_aud_pcmout.h"
static int snd_stm_debug_level;
module_param_named(debug, snd_stm_debug_level, int, S_IRUGO | S_IWUSR);
/*
* Some hardware-related definitions
*/
#define DEFAULT_FORMAT (SND_STM_FORMAT__I2S | \
SND_STM_FORMAT__SUBFRAME_32_BITS)
#define DEFAULT_OVERSAMPLING 256
/* The sample count field (NSAMPLES in CTRL register) is 19 bits wide */
#define MAX_SAMPLES_PER_PERIOD ((1 << 19) - 1)
/*
* PCM player instance definition
*/
struct snd_stm_pcm_player {
/* System informations */
struct snd_stm_pcm_player_info *info;
struct device *device;
struct snd_pcm *pcm;
int ver; /* IP version, used by register access macros */
/* Resources */
struct resource *mem_region;
void *base;
unsigned long fifo_phys_address;
unsigned int irq;
int fdma_channel;
/* Environment settings */
struct clk *clock;
struct snd_pcm_hw_constraint_list channels_constraint;
struct snd_stm_conv_source *conv_source;
/* Runtime data */
struct snd_stm_conv_group *conv_group;
struct snd_stm_buffer *buffer;
struct snd_info_entry *proc_entry;
struct snd_pcm_substream *substream;
int fdma_max_transfer_size;
struct stm_dma_params fdma_params;
struct stm_dma_req *fdma_request;
struct stm_pad_state *pads;
snd_stm_magic_field;
};
/*
* Playing engine implementation
*/
static irqreturn_t snd_stm_pcm_player_irq_handler(int irq, void *dev_id)
{
irqreturn_t result = IRQ_NONE;
struct snd_stm_pcm_player *pcm_player = dev_id;
unsigned int status;
snd_stm_printd(2, "snd_stm_pcm_player_irq_handler(irq=%d, "
"dev_id=0x%p)\n", irq, dev_id);
BUG_ON(!pcm_player);
BUG_ON(!snd_stm_magic_valid(pcm_player));
/* Get interrupt status & clear them immediately */
preempt_disable();
status = get__AUD_PCMOUT_ITS(pcm_player);
set__AUD_PCMOUT_ITS_CLR(pcm_player, status);
preempt_enable();
/* Underflow? */
if (unlikely(status & mask__AUD_PCMOUT_ITS__UNF__PENDING(pcm_player))) {
snd_stm_printe("Underflow detected in PCM player '%s'!\n",
dev_name(pcm_player->device));
snd_pcm_stop(pcm_player->substream, SNDRV_PCM_STATE_XRUN);
result = IRQ_HANDLED;
} else if (likely(status &
mask__AUD_PCMOUT_ITS__NSAMPLE__PENDING(pcm_player))) {
/* Period successfully played */
do {
BUG_ON(!pcm_player->substream);
snd_stm_printd(2, "Period elapsed ('%s')\n",
dev_name(pcm_player->device));
snd_pcm_period_elapsed(pcm_player->substream);
result = IRQ_HANDLED;
} while (0);
}
/* Some alien interrupt??? */
BUG_ON(result != IRQ_HANDLED);
return result;
}
static struct snd_pcm_hardware snd_stm_pcm_player_hw = {
.info = (SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_MMAP_VALID |
SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_BLOCK_TRANSFER |
SNDRV_PCM_INFO_PAUSE),
.formats = (SNDRV_PCM_FMTBIT_S32_LE |
SNDRV_PCM_FMTBIT_S16_LE),
.rates = SNDRV_PCM_RATE_CONTINUOUS,
.rate_min = 32000,
.rate_max = 192000,
.channels_min = 2,
.channels_max = 10,
.periods_min = 2,
.periods_max = 1024, /* TODO: sample, work out this somehow... */
/* Values below were worked out mostly basing on ST media player
* requirements. They should, however, fit most "normal" cases...
* Note 1: that these value must be also calculated not to exceed
* NSAMPLE interrupt counter size (19 bits) - MAX_SAMPLES_PER_PERIOD.
* Note 2: for 16/16-bits data this counter is a "frames counter",
* not "samples counter" (two channels are read as one word).
* Note 3: period_bytes_min defines minimum time between period
* (NSAMPLE) interrupts... Keep it large enough not to kill
* the system... */
.period_bytes_min = 4096, /* 1024 frames @ 32kHz, 16 bits, 2 ch. */
.period_bytes_max = 81920, /* 2048 frames @ 192kHz, 32 bits, 10 ch. */
.buffer_bytes_max = 81920 * 3, /* 3 worst-case-periods */
};
static int snd_stm_pcm_player_open(struct snd_pcm_substream *substream)
{
int result;
struct snd_stm_pcm_player *pcm_player =
snd_pcm_substream_chip(substream);
struct snd_pcm_runtime *runtime = substream->runtime;
snd_stm_printd(1, "snd_stm_pcm_player_open(substream=0x%p)\n",
substream);
BUG_ON(!pcm_player);
BUG_ON(!snd_stm_magic_valid(pcm_player));
BUG_ON(!runtime);
snd_pcm_set_sync(substream); /* TODO: ??? */
/* Get attached converters handle */
pcm_player->conv_group =
snd_stm_conv_request_group(pcm_player->conv_source);
if (pcm_player->conv_group)
snd_stm_printd(1, "'%s' is attached to '%s' converter(s)...\n",
dev_name(pcm_player->device),
snd_stm_conv_get_name(pcm_player->conv_group));
else
snd_stm_printd(1, "No converter attached to '%s'!\n",
dev_name(pcm_player->device));
/* Set up constraints & pass hardware capabilities info to ALSA */
result = snd_pcm_hw_constraint_list(runtime, 0,
SNDRV_PCM_HW_PARAM_CHANNELS,
&pcm_player->channels_constraint);
if (result < 0) {
snd_stm_printe("Can't set channels constraint!\n");
return result;
}
/* It is better when buffer size is an integer multiple of period
* size... Such thing will ensure this :-O */
result = snd_pcm_hw_constraint_integer(runtime,
SNDRV_PCM_HW_PARAM_PERIODS);
if (result < 0) {
snd_stm_printe("Can't set periods constraint!\n");
return result;
}
/* Make the period (so buffer as well) length (in bytes) a multiply
* of a FDMA transfer bytes (which varies depending on channels
* number and sample bytes) */
result = snd_stm_pcm_hw_constraint_transfer_bytes(runtime,
pcm_player->fdma_max_transfer_size * 4);
if (result < 0) {
snd_stm_printe("Can't set buffer bytes constraint!\n");
return result;
}
runtime->hw = snd_stm_pcm_player_hw;
/* Interrupt handler will need the substream pointer... */
pcm_player->substream = substream;
return 0;
}
static int snd_stm_pcm_player_close(struct snd_pcm_substream *substream)
{
struct snd_stm_pcm_player *pcm_player =
snd_pcm_substream_chip(substream);
snd_stm_printd(1, "snd_stm_pcm_player_close(substream=0x%p)\n",
substream);
BUG_ON(!pcm_player);
BUG_ON(!snd_stm_magic_valid(pcm_player));
if (pcm_player->conv_group) {
snd_stm_conv_release_group(pcm_player->conv_group);
pcm_player->conv_group = NULL;
}
pcm_player->substream = NULL;
return 0;
}
static int snd_stm_pcm_player_hw_free(struct snd_pcm_substream *substream)
{
struct snd_stm_pcm_player *pcm_player =
snd_pcm_substream_chip(substream);
struct snd_pcm_runtime *runtime = substream->runtime;
snd_stm_printd(1, "snd_stm_pcm_player_hw_free(substream=0x%p)\n",
substream);
BUG_ON(!pcm_player);
BUG_ON(!snd_stm_magic_valid(pcm_player));
BUG_ON(!runtime);
/* This callback may be called more than once... */
if (snd_stm_buffer_is_allocated(pcm_player->buffer)) {
/* Let the FDMA stop */
dma_wait_for_completion(pcm_player->fdma_channel);
/* Free buffer */
snd_stm_buffer_free(pcm_player->buffer);
/* Free FDMA parameters & configuration */
dma_params_free(&pcm_player->fdma_params);
dma_req_free(pcm_player->fdma_channel,
pcm_player->fdma_request);
}
return 0;
}
static int snd_stm_pcm_player_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *hw_params)
{
int result;
struct snd_stm_pcm_player *pcm_player =
snd_pcm_substream_chip(substream);
struct snd_pcm_runtime *runtime = substream->runtime;
int buffer_bytes, frame_bytes, transfer_bytes;
unsigned int transfer_size;
struct stm_dma_req_config fdma_req_config = {
.rw = REQ_CONFIG_WRITE,
.opcode = REQ_CONFIG_OPCODE_4,
.increment = 0,
.hold_off = 0,
.initiator = pcm_player->info->fdma_initiator,
};
snd_stm_printd(1, "snd_stm_pcm_player_hw_params(substream=0x%p,"
" hw_params=0x%p)\n", substream, hw_params);
BUG_ON(!pcm_player);
BUG_ON(!snd_stm_magic_valid(pcm_player));
BUG_ON(!runtime);
/* This function may be called many times, so let's be prepared... */
if (snd_stm_buffer_is_allocated(pcm_player->buffer))
snd_stm_pcm_player_hw_free(substream);
/* Allocate buffer */
buffer_bytes = params_buffer_bytes(hw_params);
result = snd_stm_buffer_alloc(pcm_player->buffer, substream,
buffer_bytes);
if (result != 0) {
snd_stm_printe("Can't allocate %d bytes buffer for '%s'!\n",
buffer_bytes, dev_name(pcm_player->device));
result = -ENOMEM;
goto error_buf_alloc;
}
/* Set FDMA transfer size (number of opcodes generated
* after request line assertion) */
frame_bytes = snd_pcm_format_physical_width(params_format(hw_params)) *
params_channels(hw_params) / 8;
transfer_bytes = snd_stm_pcm_transfer_bytes(frame_bytes,
pcm_player->fdma_max_transfer_size * 4);
transfer_size = transfer_bytes / 4;
snd_stm_printd(1, "FDMA request trigger limit and transfer size set "
"to %d.\n", transfer_size);
BUG_ON(buffer_bytes % transfer_bytes != 0);
BUG_ON(transfer_size > pcm_player->fdma_max_transfer_size);
fdma_req_config.count = transfer_size;
BUG_ON(transfer_size != 1 && transfer_size % 2 != 0);
BUG_ON(transfer_size >
mask__AUD_PCMOUT_FMT__DMA_REQ_TRIG_LMT(pcm_player));
set__AUD_PCMOUT_FMT__DMA_REQ_TRIG_LMT(pcm_player, transfer_size);
/* Configure FDMA transfer */
pcm_player->fdma_request = dma_req_config(pcm_player->fdma_channel,
pcm_player->info->fdma_request_line, &fdma_req_config);
if (!pcm_player->fdma_request) {
snd_stm_printe("Can't configure FDMA pacing channel for player"
" '%s'!\n", dev_name(pcm_player->device));
result = -EINVAL;
goto error_req_config;
}
dma_params_init(&pcm_player->fdma_params, MODE_PACED,
STM_DMA_LIST_CIRC);
dma_params_DIM_1_x_0(&pcm_player->fdma_params);
dma_params_req(&pcm_player->fdma_params, pcm_player->fdma_request);
dma_params_addrs(&pcm_player->fdma_params, runtime->dma_addr,
pcm_player->fifo_phys_address, buffer_bytes);
result = dma_compile_list(pcm_player->fdma_channel,
&pcm_player->fdma_params, GFP_KERNEL);
if (result < 0) {
snd_stm_printe("Can't compile FDMA parameters for player"
" '%s'!\n", dev_name(pcm_player->device));
goto error_compile_list;
}
return 0;
error_compile_list:
dma_req_free(pcm_player->fdma_channel,
pcm_player->fdma_request);
error_req_config:
snd_stm_buffer_free(pcm_player->buffer);
error_buf_alloc:
return result;
}
static int snd_stm_pcm_player_prepare(struct snd_pcm_substream *substream)
{
struct snd_stm_pcm_player *pcm_player =
snd_pcm_substream_chip(substream);
struct snd_pcm_runtime *runtime = substream->runtime;
unsigned int format, lr_pol;
int oversampling, bits_in_output_frame;
int result;
snd_stm_printd(1, "snd_stm_pcm_player_prepare(substream=0x%p)\n",
substream);
BUG_ON(!pcm_player);
BUG_ON(!snd_stm_magic_valid(pcm_player));
BUG_ON(!runtime);
BUG_ON(runtime->period_size * runtime->channels >=
MAX_SAMPLES_PER_PERIOD);
/* Configure SPDIF synchronisation */
/* TODO */
/* Get format & oversampling value from connected converter */
if (pcm_player->conv_group) {
format = snd_stm_conv_get_format(pcm_player->conv_group);
oversampling = snd_stm_conv_get_oversampling(
pcm_player->conv_group);
if (oversampling == 0)
oversampling = DEFAULT_OVERSAMPLING;
} else {
format = DEFAULT_FORMAT;
oversampling = DEFAULT_OVERSAMPLING;
}
snd_stm_printd(1, "Player %s: sampling frequency %d, oversampling %d\n",
dev_name(pcm_player->device), runtime->rate,
oversampling);
BUG_ON(oversampling < 0);
/* For 32 bits subframe oversampling must be a multiple of 128,
* for 16 bits - of 64 */
BUG_ON((format & SND_STM_FORMAT__SUBFRAME_32_BITS) &&
(oversampling % 128 != 0));
BUG_ON(!(format & SND_STM_FORMAT__SUBFRAME_16_BITS) &&
(oversampling % 64 != 0));
/* Set up frequency synthesizer */
result = clk_enable(pcm_player->clock);
if (result != 0) {
snd_stm_printe("Can't enable clock for player '%s'!\n",
dev_name(pcm_player->device));
return result;
}
result = clk_set_rate(pcm_player->clock,
runtime->rate * oversampling);
if (result != 0) {
snd_stm_printe("Can't configure clock for player '%s'!\n",
dev_name(pcm_player->device));
clk_disable(pcm_player->clock);
return result;
}
/* Set up player hardware */
snd_stm_printd(1, "Player %s format configuration:\n",
dev_name(pcm_player->device));
/* Number of bits per subframe (which is one channel sample)
* on output - it determines serial clock frequency, which is
* 64 times sampling rate for 32 bits subframe (2 channels 32
* bits each means 64 bits per frame) and 32 times sampling
* rate for 16 bits subframe
* (you know why, don't you? :-) */
switch (format & SND_STM_FORMAT__SUBFRAME_MASK) {
case SND_STM_FORMAT__SUBFRAME_32_BITS:
snd_stm_printd(1, "- 32 bits per subframe\n");
set__AUD_PCMOUT_FMT__NBIT__32_BITS(pcm_player);
if (pcm_player->ver > 5)
set__AUD_PCMOUT_FMT__DATA_SIZE__32_BITS(pcm_player);
else
set__AUD_PCMOUT_FMT__DATA_SIZE__24_BITS(pcm_player);
bits_in_output_frame = 64; /* frame = 2 * subframe */
break;
case SND_STM_FORMAT__SUBFRAME_16_BITS:
snd_stm_printd(1, "- 16 bits per subframe\n");
set__AUD_PCMOUT_FMT__NBIT__16_BITS(pcm_player);
set__AUD_PCMOUT_FMT__DATA_SIZE__16_BITS(pcm_player);
bits_in_output_frame = 32; /* frame = 2 * subframe */
break;
default:
snd_BUG();
return -EINVAL;
}
/* Serial audio interface format - for detailed explanation
* see ie.:
* http://www.cirrus.com/en/pubs/appNote/AN282REV1.pdf */
set__AUD_PCMOUT_FMT__ORDER__MSB_FIRST(pcm_player);
/* Value FALLING of SCLK_EDGE bit in AUD_PCMOUT_FMT register that
* actually means "data clocking (changing) on the falling edge"
* (and we usually want this...) - STx7100 and cuts < 3.0 of
* STx7109 have this bit inverted comparing to what their
* datasheets claim... (specs say 1) */
set__AUD_PCMOUT_FMT__SCLK_EDGE__FALLING(pcm_player);
switch (format & SND_STM_FORMAT__MASK) {
case SND_STM_FORMAT__I2S:
snd_stm_printd(1, "- I2S\n");
set__AUD_PCMOUT_FMT__ALIGN__LEFT(pcm_player);
set__AUD_PCMOUT_FMT__PADDING__1_CYCLE_DELAY(pcm_player);
lr_pol = value__AUD_PCMOUT_FMT__LR_POL__LEFT_LOW(pcm_player);
break;
case SND_STM_FORMAT__LEFT_JUSTIFIED:
snd_stm_printd(1, "- left justified\n");
set__AUD_PCMOUT_FMT__ALIGN__LEFT(pcm_player);
set__AUD_PCMOUT_FMT__PADDING__NO_DELAY(pcm_player);
lr_pol = value__AUD_PCMOUT_FMT__LR_POL__LEFT_HIGH(pcm_player);
break;
case SND_STM_FORMAT__RIGHT_JUSTIFIED:
snd_stm_printd(1, "- right justified\n");
set__AUD_PCMOUT_FMT__ALIGN__RIGHT(pcm_player);
set__AUD_PCMOUT_FMT__PADDING__NO_DELAY(pcm_player);
lr_pol = value__AUD_PCMOUT_FMT__LR_POL__LEFT_HIGH(pcm_player);
break;
default:
snd_BUG();
return -EINVAL;
}
/* Configure PCM player frequency divider
*
* Fdacclk Fs * oversampling
* divider = ----------- = ------------------------------- =
* 2 * Fsclk 2 * Fs * bits_in_output_frame
*
* oversampling
* = --------------------------
* 2 * bits_in_output_frame
* where:
* - Fdacclk - frequency of DAC clock signal, known also as PCMCLK,
* MCLK (master clock), "system clock" etc.
* - Fsclk - frequency of SCLK (serial clock) aka BICK (bit clock)
* - Fs - sampling rate (frequency)
* - bits_in_output_frame - number of bits in output signal _frame_
* (32 or 64, depending on NBIT field of FMT register)
*/
set__AUD_PCMOUT_CTRL__CLK_DIV(pcm_player,
oversampling / (2 * bits_in_output_frame));
/* Configure data memory format & NSAMPLE interrupt */
switch (runtime->format) {
case SNDRV_PCM_FORMAT_S16_LE:
/* One data word contains two samples */
set__AUD_PCMOUT_CTRL__MEM_FMT__16_BITS_16_BITS(pcm_player);
/* Workaround for a problem with L/R channels swap in case of
* 16/16 memory model: PCM player expects left channel data in
* word's upper two bytes, but due to little endianess
* character of our memory there is right channel data there;
* the workaround is to invert L/R signal, however it is
* cheating, because in such case channel phases are shifted
* by one sample...
* (ask me for more details if above is not clear ;-)
* TODO this somehow better... */
set__AUD_PCMOUT_FMT__LR_POL(pcm_player, !lr_pol);
/* One word of data is two samples (two channels...) */
set__AUD_PCMOUT_CTRL__NSAMPLE(pcm_player,
runtime->period_size * runtime->channels / 2);
break;
case SNDRV_PCM_FORMAT_S32_LE:
/* Actually "16 bits/0 bits" means "32/28/24/20/18/16 bits
* on the left than zeros (if less than 32 bites)"... ;-) */
set__AUD_PCMOUT_CTRL__MEM_FMT__16_BITS_0_BITS(pcm_player);
/* In x/0 bits memory mode there is no problem with
* L/R polarity */
set__AUD_PCMOUT_FMT__LR_POL(pcm_player, lr_pol);
/* One word of data is one sample, so period size
* times channels */
set__AUD_PCMOUT_CTRL__NSAMPLE(pcm_player,
runtime->period_size * runtime->channels);
break;
default:
snd_BUG();
return -EINVAL;
}
/* Number of channels... */
BUG_ON(runtime->channels % 2 != 0);
BUG_ON(runtime->channels < 2);
BUG_ON(runtime->channels > 10);
set__AUD_PCMOUT_FMT__NUM_CH(pcm_player, runtime->channels / 2);
return 0;
}
static int snd_stm_pcm_player_start(struct snd_pcm_substream *substream)
{
int result;
struct snd_stm_pcm_player *pcm_player =
snd_pcm_substream_chip(substream);
snd_stm_printd(1, "snd_stm_pcm_player_start(substream=0x%p)\n",
substream);
BUG_ON(!pcm_player);
BUG_ON(!snd_stm_magic_valid(pcm_player));
/* Un-reset PCM player */
set__AUD_PCMOUT_RST__SRSTP__RUNNING(pcm_player);
/* Launch FDMA transfer */
result = dma_xfer_list(pcm_player->fdma_channel,
&pcm_player->fdma_params);
if (result != 0) {
snd_stm_printe("Can't launch FDMA transfer for player '%s'!\n",
dev_name(pcm_player->device));
clk_disable(pcm_player->clock);
return -EINVAL;
}
while (dma_get_status(pcm_player->fdma_channel) !=
DMA_CHANNEL_STATUS_RUNNING)
udelay(5);
/* Enable player interrupts (and clear possible stalled ones) */
enable_irq(pcm_player->irq);
set__AUD_PCMOUT_ITS_CLR__NSAMPLE__CLEAR(pcm_player);
set__AUD_PCMOUT_IT_EN_SET__NSAMPLE__SET(pcm_player);
set__AUD_PCMOUT_ITS_CLR__UNF__CLEAR(pcm_player);
set__AUD_PCMOUT_IT_EN_SET__UNF__SET(pcm_player);
/* Launch the player */
set__AUD_PCMOUT_CTRL__MODE__PCM(pcm_player);
/* Wake up & unmute DAC */
if (pcm_player->conv_group) {
snd_stm_conv_enable(pcm_player->conv_group,
0, substream->runtime->channels - 1);
snd_stm_conv_unmute(pcm_player->conv_group);
}
return 0;
}
static int snd_stm_pcm_player_stop(struct snd_pcm_substream *substream)
{
struct snd_stm_pcm_player *pcm_player =
snd_pcm_substream_chip(substream);
snd_stm_printd(1, "snd_stm_pcm_player_stop(substream=0x%p)\n",
substream);
BUG_ON(!pcm_player);
BUG_ON(!snd_stm_magic_valid(pcm_player));
/* Mute & shutdown DAC */
if (pcm_player->conv_group) {
snd_stm_conv_mute(pcm_player->conv_group);
snd_stm_conv_disable(pcm_player->conv_group);
}
/* Disable interrupts */
set__AUD_PCMOUT_IT_EN_CLR__NSAMPLE__CLEAR(pcm_player);
set__AUD_PCMOUT_IT_EN_CLR__UNF__CLEAR(pcm_player);
disable_irq_nosync(pcm_player->irq);
/* Stop PCM player */
set__AUD_PCMOUT_CTRL__MODE__OFF(pcm_player);
/* Stop FDMA transfer */
dma_stop_channel(pcm_player->fdma_channel);
/* Stop the clock & reset PCM player */
clk_disable(pcm_player->clock);
set__AUD_PCMOUT_RST__SRSTP__RESET(pcm_player);
return 0;
}
static int snd_stm_pcm_player_pause(struct snd_pcm_substream *substream)
{
struct snd_stm_pcm_player *pcm_player =
snd_pcm_substream_chip(substream);
snd_stm_printd(1, "snd_stm_pcm_player_pause(substream=0x%p)\n",
substream);
BUG_ON(!pcm_player);
BUG_ON(!snd_stm_magic_valid(pcm_player));
/* "Mute" player
* Documentation describes this mode in a wrong way - data is _not_
* consumed in the "mute" mode, so it is actually a "pause" mode */
set__AUD_PCMOUT_CTRL__MODE__MUTE(pcm_player);
return 0;
}
static int snd_stm_pcm_player_release(struct snd_pcm_substream *substream)
{
struct snd_stm_pcm_player *pcm_player =
snd_pcm_substream_chip(substream);
snd_stm_printd(1, "snd_stm_pcm_player_release(substream=0x%p)\n",
substream);
BUG_ON(!pcm_player);
BUG_ON(!snd_stm_magic_valid(pcm_player));
/* "Unmute" player */
set__AUD_PCMOUT_CTRL__MODE__PCM(pcm_player);
return 0;
}
static int snd_stm_pcm_player_trigger(struct snd_pcm_substream *substream,
int command)
{
snd_stm_printd(1, "snd_stm_pcm_player_trigger(substream=0x%p,"
" command=%d)\n", substream, command);
switch (command) {
case SNDRV_PCM_TRIGGER_START:
return snd_stm_pcm_player_start(substream);
case SNDRV_PCM_TRIGGER_STOP:
return snd_stm_pcm_player_stop(substream);
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
return snd_stm_pcm_player_pause(substream);
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
return snd_stm_pcm_player_release(substream);
default:
return -EINVAL;
}
}
static snd_pcm_uframes_t snd_stm_pcm_player_pointer(struct snd_pcm_substream
*substream)
{
struct snd_stm_pcm_player *pcm_player =
snd_pcm_substream_chip(substream);
struct snd_pcm_runtime *runtime = substream->runtime;
int residue, hwptr;
snd_pcm_uframes_t pointer;
snd_stm_printd(2, "snd_stm_pcm_player_pointer(substream=0x%p)\n",
substream);
BUG_ON(!pcm_player);
BUG_ON(!snd_stm_magic_valid(pcm_player));
BUG_ON(!runtime);
residue = get_dma_residue(pcm_player->fdma_channel);
hwptr = (runtime->dma_bytes - residue) % runtime->dma_bytes;
pointer = bytes_to_frames(runtime, hwptr);
snd_stm_printd(2, "FDMA residue value is %i and buffer size is %u"
" bytes...\n", residue, runtime->dma_bytes);
snd_stm_printd(2, "... so HW pointer in frames is %lu (0x%lx)!\n",
pointer, pointer);
return pointer;
}
static struct snd_pcm_ops snd_stm_pcm_player_pcm_ops = {
.open = snd_stm_pcm_player_open,
.close = snd_stm_pcm_player_close,
.mmap = snd_stm_buffer_mmap,
.ioctl = snd_pcm_lib_ioctl,
.hw_params = snd_stm_pcm_player_hw_params,
.hw_free = snd_stm_pcm_player_hw_free,
.prepare = snd_stm_pcm_player_prepare,
.trigger = snd_stm_pcm_player_trigger,
.pointer = snd_stm_pcm_player_pointer,
};
/*
* ALSA lowlevel device implementation
*/
#define DUMP_REGISTER(r) \
snd_iprintf(buffer, "AUD_PCMOUT_%s (offset 0x%02x) =" \
" 0x%08x\n", __stringify(r), \
offset__AUD_PCMOUT_##r(pcm_player), \
get__AUD_PCMOUT_##r(pcm_player))
static void snd_stm_pcm_player_dump_registers(struct snd_info_entry *entry,
struct snd_info_buffer *buffer)
{
struct snd_stm_pcm_player *pcm_player = entry->private_data;
BUG_ON(!pcm_player);
BUG_ON(!snd_stm_magic_valid(pcm_player));
snd_iprintf(buffer, "--- %s ---\n", dev_name(pcm_player->device));
snd_iprintf(buffer, "base = 0x%p\n", pcm_player->base);
DUMP_REGISTER(RST);
DUMP_REGISTER(DATA);
DUMP_REGISTER(ITS);
DUMP_REGISTER(ITS_CLR);
DUMP_REGISTER(IT_EN);
DUMP_REGISTER(IT_EN_SET);
DUMP_REGISTER(IT_EN_CLR);
DUMP_REGISTER(CTRL);
DUMP_REGISTER(STA);
DUMP_REGISTER(FMT);
snd_iprintf(buffer, "\n");
}
static int snd_stm_pcm_player_register(struct snd_device *snd_device)
{
struct snd_stm_pcm_player *pcm_player = snd_device->device_data;
snd_stm_printd(1, "%s(snd_device=0x%p)\n", __func__, snd_device);
BUG_ON(!pcm_player);
BUG_ON(!snd_stm_magic_valid(pcm_player));
/* Set reset mode */
set__AUD_PCMOUT_RST__SRSTP__RESET(pcm_player);
/* TODO: well, hardcoded - shall anyone use it?
* And what does it actually mean? */
if (pcm_player->ver > 5)
set__AUD_PCMOUT_FMT__BACK_STALLING__DISABLED(pcm_player);
set__AUD_PCMOUT_CTRL__RND__NO_ROUNDING(pcm_player);
/* Get frequency synthesizer channel */
BUG_ON(!pcm_player->info->clock_name);
snd_stm_printd(0, "Player connected to clock '%s'.\n",
pcm_player->info->clock_name);
pcm_player->clock = snd_stm_clk_get(pcm_player->device,
pcm_player->info->clock_name, snd_device->card,
pcm_player->info->card_device);
if (!pcm_player->clock || IS_ERR(pcm_player->clock)) {
snd_stm_printe("Failed to get a clock for '%s'!\n",
dev_name(pcm_player->device));
return -EINVAL;
}
/* Registers view in ALSA's procfs */
snd_stm_info_register(&pcm_player->proc_entry,
dev_name(pcm_player->device),
snd_stm_pcm_player_dump_registers, pcm_player);
return 0;
}
static int __exit snd_stm_pcm_player_disconnect(struct snd_device *snd_device)
{
struct snd_stm_pcm_player *pcm_player = snd_device->device_data;
snd_stm_printd(1, "%s(snd_device=0x%p)\n", __func__, snd_device);
BUG_ON(!pcm_player);
BUG_ON(!snd_stm_magic_valid(pcm_player));
snd_stm_clk_put(pcm_player->clock);
snd_stm_info_unregister(pcm_player->proc_entry);
return 0;
}
static struct snd_device_ops snd_stm_pcm_player_snd_device_ops = {
.dev_register = snd_stm_pcm_player_register,
.dev_disconnect = snd_stm_pcm_player_disconnect,
};
/*
* Platform driver routines
*/
static int snd_stm_pcm_player_probe(struct platform_device *pdev)
{
int result = 0;
struct snd_stm_pcm_player *pcm_player;
struct snd_card *card = snd_stm_card_get();
int i;
snd_stm_printd(0, "%s('%s')\n", __func__, dev_name(&pdev->dev));
BUG_ON(!card);
pcm_player = kzalloc(sizeof(*pcm_player), GFP_KERNEL);
if (!pcm_player) {
snd_stm_printe("Can't allocate memory "
"for a device description!\n");
result = -ENOMEM;
goto error_alloc;
}
snd_stm_magic_set(pcm_player);
pcm_player->info = pdev->dev.platform_data;
BUG_ON(!pcm_player->info);
pcm_player->ver = pcm_player->info->ver;
BUG_ON(pcm_player->ver <= 0);
pcm_player->device = &pdev->dev;
/* Get resources */
result = snd_stm_memory_request(pdev, &pcm_player->mem_region,
&pcm_player->base);
if (result < 0) {
snd_stm_printe("Memory region request failed!\n");
goto error_memory_request;
}
pcm_player->fifo_phys_address = pcm_player->mem_region->start +
offset__AUD_PCMOUT_DATA(pcm_player);
snd_stm_printd(0, "FIFO physical address: 0x%lx.\n",
pcm_player->fifo_phys_address);
result = snd_stm_irq_request(pdev, &pcm_player->irq,
snd_stm_pcm_player_irq_handler, pcm_player);
if (result < 0) {
snd_stm_printe("IRQ request failed!\n");
goto error_irq_request;
}
result = snd_stm_fdma_request(pdev, &pcm_player->fdma_channel);
if (result < 0) {
snd_stm_printe("FDMA request failed!\n");
goto error_fdma_request;
}
/* FDMA transfer size depends (among others ;-) on FIFO length,
* which is:
* - 30 cells (120 bytes) in STx7100/9 and STx7200 cut 1.0
* - 70 cells (280 bytes) in STx7111 and STx7200 cut 2.0. */
if (pcm_player->ver < 5)
pcm_player->fdma_max_transfer_size = 2;
else if (pcm_player->ver == 5)
pcm_player->fdma_max_transfer_size = 20;
else
pcm_player->fdma_max_transfer_size = 30;
/* Get player capabilities */
snd_stm_printd(0, "Player's name is '%s'\n", pcm_player->info->name);
BUG_ON(pcm_player->info->channels <= 0);
BUG_ON(pcm_player->info->channels > 10);
BUG_ON(pcm_player->info->channels % 2 != 0);
if (pcm_player->ver > 1) {
static unsigned int channels_2_10[] = { 2, 4, 6, 8, 10 };
pcm_player->channels_constraint.list = channels_2_10;
pcm_player->channels_constraint.count =
pcm_player->info->channels / 2;
} else {
/* In STx7100 cut < 3.0 PCM player ignored NUM_CH setting in
* AUD_PCMOUT_FMT register (and it was always in 10 channels
* mode...) */
static unsigned int channels_10[] = { 10 };
pcm_player->channels_constraint.list = channels_10;
pcm_player->channels_constraint.count = 1;
}
pcm_player->channels_constraint.mask = 0;
for (i = 0; i < pcm_player->channels_constraint.count; i++)
snd_stm_printd(0, "Player capable of playing %u-channels PCM."
"\n", pcm_player->channels_constraint.list[i]);
/* STx7100 has a problem with 16/16 bits FIFO organization,
* so we disable the 16 bits samples capability... */
if (pcm_player->ver <= 2)
snd_stm_pcm_player_hw.formats &= ~SNDRV_PCM_FMTBIT_S16_LE;
/* Create ALSA lowlevel device */
result = snd_device_new(card, SNDRV_DEV_LOWLEVEL, pcm_player,
&snd_stm_pcm_player_snd_device_ops);
if (result < 0) {
snd_stm_printe("ALSA low level device creation failed!\n");
goto error_device;
}
/* Create ALSA PCM device */
result = snd_pcm_new(card, NULL, pcm_player->info->card_device, 1, 0,
&pcm_player->pcm);
if (result < 0) {
snd_stm_printe("ALSA PCM instance creation failed!\n");
goto error_pcm;
}
pcm_player->pcm->private_data = pcm_player;
strcpy(pcm_player->pcm->name, pcm_player->info->name);
snd_pcm_set_ops(pcm_player->pcm, SNDRV_PCM_STREAM_PLAYBACK,
&snd_stm_pcm_player_pcm_ops);
/* Initialize buffer */
pcm_player->buffer = snd_stm_buffer_create(pcm_player->pcm,
pcm_player->device,
snd_stm_pcm_player_hw.buffer_bytes_max);
if (!pcm_player->buffer) {
snd_stm_printe("Cannot initialize buffer!\n");
result = -ENOMEM;
goto error_buffer_init;
}
/* Register in converters router */
pcm_player->conv_source = snd_stm_conv_register_source(
&platform_bus_type, dev_name(&pdev->dev),
pcm_player->info->channels,
card, pcm_player->info->card_device);
if (!pcm_player->conv_source) {
snd_stm_printe("Cannot register in converters router!\n");
result = -ENOMEM;
goto error_conv_register_source;
}
/* Claim the pads */
if (pcm_player->info->pad_config) {
pcm_player->pads = stm_pad_claim(pcm_player->info->pad_config,
dev_name(&pdev->dev));
if (!pcm_player->pads) {
snd_stm_printe("Failed to claimed pads for '%s'!\n",
dev_name(&pdev->dev));
result = -EBUSY;
goto error_pad_claim;
}
}
/* Done now */
platform_set_drvdata(pdev, pcm_player);
return 0;
error_pad_claim:
snd_stm_conv_unregister_source(pcm_player->conv_source);
error_conv_register_source:
snd_stm_buffer_dispose(pcm_player->buffer);
error_buffer_init:
/* snd_pcm_free() is not available - PCM device will be released
* during card release */
error_pcm:
snd_device_free(card, pcm_player);
error_device:
snd_stm_fdma_release(pcm_player->fdma_channel);
error_fdma_request:
snd_stm_irq_release(pcm_player->irq, pcm_player);
error_irq_request:
snd_stm_memory_release(pcm_player->mem_region, pcm_player->base);
error_memory_request:
snd_stm_magic_clear(pcm_player);
kfree(pcm_player);
error_alloc:
return result;
}
static int snd_stm_pcm_player_remove(struct platform_device *pdev)
{
struct snd_stm_pcm_player *pcm_player = platform_get_drvdata(pdev);
snd_stm_printd(1, "snd_stm_pcm_player_remove(pdev=%p)\n", pdev);
BUG_ON(!pcm_player);
BUG_ON(!snd_stm_magic_valid(pcm_player));
if (pcm_player->pads)
stm_pad_release(pcm_player->pads);
snd_stm_conv_unregister_source(pcm_player->conv_source);
snd_stm_buffer_dispose(pcm_player->buffer);
snd_stm_fdma_release(pcm_player->fdma_channel);
snd_stm_irq_release(pcm_player->irq, pcm_player);
snd_stm_memory_release(pcm_player->mem_region, pcm_player->base);
snd_stm_magic_clear(pcm_player);
kfree(pcm_player);
return 0;
}
static struct platform_driver snd_stm_pcm_player_driver = {
.driver.name = "snd_pcm_player",
.probe = snd_stm_pcm_player_probe,
.remove = snd_stm_pcm_player_remove,
};
/*
* Initialization
*/
static int __init snd_stm_pcm_player_init(void)
{
return platform_driver_register(&snd_stm_pcm_player_driver);
}
static void __exit snd_stm_pcm_player_exit(void)
{
platform_driver_unregister(&snd_stm_pcm_player_driver);
}
MODULE_AUTHOR("Pawel Moll <pawel.moll@st.com>");
MODULE_DESCRIPTION("STMicroelectronics PCM player driver");
MODULE_LICENSE("GPL");
module_init(snd_stm_pcm_player_init);
module_exit(snd_stm_pcm_player_exit);
Reference in New Issue View Git Blame Copy Permalink