163 lines
4.4 KiB
C
163 lines
4.4 KiB
C
/*
|
|
* Copyright 2008-2009 Analog Devices Inc.
|
|
*
|
|
* Licensed under the GPL-2 or later.
|
|
*/
|
|
|
|
#include <linux/serial.h>
|
|
#include <asm/dma.h>
|
|
#include <asm/portmux.h>
|
|
|
|
#define UART_GET_CHAR(uart) bfin_read16(((uart)->port.membase + OFFSET_RBR))
|
|
#define UART_GET_DLL(uart) bfin_read16(((uart)->port.membase + OFFSET_DLL))
|
|
#define UART_GET_IER(uart) bfin_read16(((uart)->port.membase + OFFSET_IER))
|
|
#define UART_GET_DLH(uart) bfin_read16(((uart)->port.membase + OFFSET_DLH))
|
|
#define UART_GET_IIR(uart) bfin_read16(((uart)->port.membase + OFFSET_IIR))
|
|
#define UART_GET_LCR(uart) bfin_read16(((uart)->port.membase + OFFSET_LCR))
|
|
#define UART_GET_GCTL(uart) bfin_read16(((uart)->port.membase + OFFSET_GCTL))
|
|
|
|
#define UART_PUT_CHAR(uart, v) bfin_write16(((uart)->port.membase + OFFSET_THR), v)
|
|
#define UART_PUT_DLL(uart, v) bfin_write16(((uart)->port.membase + OFFSET_DLL), v)
|
|
#define UART_PUT_IER(uart, v) bfin_write16(((uart)->port.membase + OFFSET_IER), v)
|
|
#define UART_SET_IER(uart, v) UART_PUT_IER(uart, UART_GET_IER(uart) | (v))
|
|
#define UART_CLEAR_IER(uart, v) UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v))
|
|
#define UART_PUT_DLH(uart, v) bfin_write16(((uart)->port.membase + OFFSET_DLH), v)
|
|
#define UART_PUT_LCR(uart, v) bfin_write16(((uart)->port.membase + OFFSET_LCR), v)
|
|
#define UART_PUT_GCTL(uart, v) bfin_write16(((uart)->port.membase + OFFSET_GCTL), v)
|
|
|
|
#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
|
|
#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
|
|
|
|
#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
|
|
#define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
|
|
#define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
|
|
#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
|
|
#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
|
|
|
|
#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
|
|
# define CONFIG_SERIAL_BFIN_CTSRTS
|
|
|
|
# ifndef CONFIG_UART0_CTS_PIN
|
|
# define CONFIG_UART0_CTS_PIN -1
|
|
# endif
|
|
|
|
# ifndef CONFIG_UART0_RTS_PIN
|
|
# define CONFIG_UART0_RTS_PIN -1
|
|
# endif
|
|
|
|
# ifndef CONFIG_UART1_CTS_PIN
|
|
# define CONFIG_UART1_CTS_PIN -1
|
|
# endif
|
|
|
|
# ifndef CONFIG_UART1_RTS_PIN
|
|
# define CONFIG_UART1_RTS_PIN -1
|
|
# endif
|
|
#endif
|
|
|
|
#define BFIN_UART_TX_FIFO_SIZE 2
|
|
|
|
/*
|
|
* The pin configuration is different from schematic
|
|
*/
|
|
struct bfin_serial_port {
|
|
struct uart_port port;
|
|
unsigned int old_status;
|
|
int status_irq;
|
|
unsigned int lsr;
|
|
#ifdef CONFIG_SERIAL_BFIN_DMA
|
|
int tx_done;
|
|
int tx_count;
|
|
struct circ_buf rx_dma_buf;
|
|
struct timer_list rx_dma_timer;
|
|
int rx_dma_nrows;
|
|
unsigned int tx_dma_channel;
|
|
unsigned int rx_dma_channel;
|
|
struct work_struct tx_dma_workqueue;
|
|
#endif
|
|
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
|
|
struct timer_list cts_timer;
|
|
int cts_pin;
|
|
int rts_pin;
|
|
#endif
|
|
};
|
|
|
|
/* The hardware clears the LSR bits upon read, so we need to cache
|
|
* some of the more fun bits in software so they don't get lost
|
|
* when checking the LSR in other code paths (TX).
|
|
*/
|
|
static inline unsigned int UART_GET_LSR(struct bfin_serial_port *uart)
|
|
{
|
|
unsigned int lsr = bfin_read16(uart->port.membase + OFFSET_LSR);
|
|
uart->lsr |= (lsr & (BI|FE|PE|OE));
|
|
return lsr | uart->lsr;
|
|
}
|
|
|
|
static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart)
|
|
{
|
|
uart->lsr = 0;
|
|
bfin_write16(uart->port.membase + OFFSET_LSR, -1);
|
|
}
|
|
|
|
struct bfin_serial_res {
|
|
unsigned long uart_base_addr;
|
|
int uart_irq;
|
|
int uart_status_irq;
|
|
#ifdef CONFIG_SERIAL_BFIN_DMA
|
|
unsigned int uart_tx_dma_channel;
|
|
unsigned int uart_rx_dma_channel;
|
|
#endif
|
|
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
|
|
int uart_cts_pin;
|
|
int uart_rts_pin;
|
|
#endif
|
|
};
|
|
|
|
struct bfin_serial_res bfin_serial_resource[] = {
|
|
#ifdef CONFIG_SERIAL_BFIN_UART0
|
|
{
|
|
0xFFC00400,
|
|
IRQ_UART0_RX,
|
|
IRQ_UART0_ERROR,
|
|
#ifdef CONFIG_SERIAL_BFIN_DMA
|
|
CH_UART0_TX,
|
|
CH_UART0_RX,
|
|
#endif
|
|
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
|
|
CONFIG_UART0_CTS_PIN,
|
|
CONFIG_UART0_RTS_PIN,
|
|
#endif
|
|
},
|
|
#endif
|
|
#ifdef CONFIG_SERIAL_BFIN_UART1
|
|
{
|
|
0xFFC02000,
|
|
IRQ_UART1_RX,
|
|
IRQ_UART1_ERROR,
|
|
#ifdef CONFIG_SERIAL_BFIN_DMA
|
|
CH_UART1_TX,
|
|
CH_UART1_RX,
|
|
#endif
|
|
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
|
|
CONFIG_UART1_CTS_PIN,
|
|
CONFIG_UART1_RTS_PIN,
|
|
#endif
|
|
},
|
|
#endif
|
|
#ifdef CONFIG_SERIAL_BFIN_UART2
|
|
{
|
|
0xFFC02100,
|
|
IRQ_UART2_RX,
|
|
#ifdef CONFIG_SERIAL_BFIN_DMA
|
|
CH_UART2_TX,
|
|
CH_UART2_RX,
|
|
#endif
|
|
#ifdef CONFIG_BFIN_UART2_CTSRTS
|
|
CONFIG_UART2_CTS_PIN,
|
|
CONFIG_UART2_RTS_PIN,
|
|
#endif
|
|
},
|
|
#endif
|
|
};
|
|
|
|
#define DRIVER_NAME "bfin-uart"
|