1176 lines
30 KiB
C
1176 lines
30 KiB
C
/*
|
|
* Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
|
|
* Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
|
|
* Copyright (c) 2007-2008 Matthew W. S. Bell <mentor@madwifi.org>
|
|
* Copyright (c) 2007-2008 Luis Rodriguez <mcgrof@winlab.rutgers.edu>
|
|
* Copyright (c) 2007-2008 Pavel Roskin <proski@gnu.org>
|
|
* Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com>
|
|
*
|
|
* Permission to use, copy, modify, and distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*
|
|
*/
|
|
|
|
/*********************************\
|
|
* Protocol Control Unit Functions *
|
|
\*********************************/
|
|
|
|
#include "ath5k.h"
|
|
#include "reg.h"
|
|
#include "debug.h"
|
|
#include "base.h"
|
|
|
|
/*******************\
|
|
* Generic functions *
|
|
\*******************/
|
|
|
|
/**
|
|
* ath5k_hw_set_opmode - Set PCU operating mode
|
|
*
|
|
* @ah: The &struct ath5k_hw
|
|
*
|
|
* Initialize PCU for the various operating modes (AP/STA etc)
|
|
*
|
|
* NOTE: ah->ah_op_mode must be set before calling this.
|
|
*/
|
|
int ath5k_hw_set_opmode(struct ath5k_hw *ah)
|
|
{
|
|
u32 pcu_reg, beacon_reg, low_id, high_id;
|
|
|
|
|
|
/* Preserve rest settings */
|
|
pcu_reg = ath5k_hw_reg_read(ah, AR5K_STA_ID1) & 0xffff0000;
|
|
pcu_reg &= ~(AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_AP
|
|
| AR5K_STA_ID1_KEYSRCH_MODE
|
|
| (ah->ah_version == AR5K_AR5210 ?
|
|
(AR5K_STA_ID1_PWR_SV | AR5K_STA_ID1_NO_PSPOLL) : 0));
|
|
|
|
beacon_reg = 0;
|
|
|
|
ATH5K_TRACE(ah->ah_sc);
|
|
|
|
switch (ah->ah_op_mode) {
|
|
case NL80211_IFTYPE_ADHOC:
|
|
pcu_reg |= AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_KEYSRCH_MODE;
|
|
beacon_reg |= AR5K_BCR_ADHOC;
|
|
if (ah->ah_version == AR5K_AR5210)
|
|
pcu_reg |= AR5K_STA_ID1_NO_PSPOLL;
|
|
else
|
|
AR5K_REG_ENABLE_BITS(ah, AR5K_CFG, AR5K_CFG_IBSS);
|
|
break;
|
|
|
|
case NL80211_IFTYPE_AP:
|
|
case NL80211_IFTYPE_MESH_POINT:
|
|
pcu_reg |= AR5K_STA_ID1_AP | AR5K_STA_ID1_KEYSRCH_MODE;
|
|
beacon_reg |= AR5K_BCR_AP;
|
|
if (ah->ah_version == AR5K_AR5210)
|
|
pcu_reg |= AR5K_STA_ID1_NO_PSPOLL;
|
|
else
|
|
AR5K_REG_DISABLE_BITS(ah, AR5K_CFG, AR5K_CFG_IBSS);
|
|
break;
|
|
|
|
case NL80211_IFTYPE_STATION:
|
|
pcu_reg |= AR5K_STA_ID1_KEYSRCH_MODE
|
|
| (ah->ah_version == AR5K_AR5210 ?
|
|
AR5K_STA_ID1_PWR_SV : 0);
|
|
case NL80211_IFTYPE_MONITOR:
|
|
pcu_reg |= AR5K_STA_ID1_KEYSRCH_MODE
|
|
| (ah->ah_version == AR5K_AR5210 ?
|
|
AR5K_STA_ID1_NO_PSPOLL : 0);
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* Set PCU registers
|
|
*/
|
|
low_id = AR5K_LOW_ID(ah->ah_sta_id);
|
|
high_id = AR5K_HIGH_ID(ah->ah_sta_id);
|
|
ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0);
|
|
ath5k_hw_reg_write(ah, pcu_reg | high_id, AR5K_STA_ID1);
|
|
|
|
/*
|
|
* Set Beacon Control Register on 5210
|
|
*/
|
|
if (ah->ah_version == AR5K_AR5210)
|
|
ath5k_hw_reg_write(ah, beacon_reg, AR5K_BCR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ath5k_hw_update - Update mib counters (mac layer statistics)
|
|
*
|
|
* @ah: The &struct ath5k_hw
|
|
* @stats: The &struct ieee80211_low_level_stats we use to track
|
|
* statistics on the driver
|
|
*
|
|
* Reads MIB counters from PCU and updates sw statistics. Must be
|
|
* called after a MIB interrupt.
|
|
*/
|
|
void ath5k_hw_update_mib_counters(struct ath5k_hw *ah,
|
|
struct ieee80211_low_level_stats *stats)
|
|
{
|
|
ATH5K_TRACE(ah->ah_sc);
|
|
|
|
/* Read-And-Clear */
|
|
stats->dot11ACKFailureCount += ath5k_hw_reg_read(ah, AR5K_ACK_FAIL);
|
|
stats->dot11RTSFailureCount += ath5k_hw_reg_read(ah, AR5K_RTS_FAIL);
|
|
stats->dot11RTSSuccessCount += ath5k_hw_reg_read(ah, AR5K_RTS_OK);
|
|
stats->dot11FCSErrorCount += ath5k_hw_reg_read(ah, AR5K_FCS_FAIL);
|
|
|
|
/* XXX: Should we use this to track beacon count ?
|
|
* -we read it anyway to clear the register */
|
|
ath5k_hw_reg_read(ah, AR5K_BEACON_CNT);
|
|
|
|
/* Reset profile count registers on 5212*/
|
|
if (ah->ah_version == AR5K_AR5212) {
|
|
ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_TX);
|
|
ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_RX);
|
|
ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_RXCLR);
|
|
ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_CYCLE);
|
|
}
|
|
|
|
/* TODO: Handle ANI stats */
|
|
}
|
|
|
|
/**
|
|
* ath5k_hw_set_ack_bitrate - set bitrate for ACKs
|
|
*
|
|
* @ah: The &struct ath5k_hw
|
|
* @high: Flag to determine if we want to use high transmition rate
|
|
* for ACKs or not
|
|
*
|
|
* If high flag is set, we tell hw to use a set of control rates based on
|
|
* the current transmition rate (check out control_rates array inside reset.c).
|
|
* If not hw just uses the lowest rate available for the current modulation
|
|
* scheme being used (1Mbit for CCK and 6Mbits for OFDM).
|
|
*/
|
|
void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high)
|
|
{
|
|
if (ah->ah_version != AR5K_AR5212)
|
|
return;
|
|
else {
|
|
u32 val = AR5K_STA_ID1_BASE_RATE_11B | AR5K_STA_ID1_ACKCTS_6MB;
|
|
if (high)
|
|
AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, val);
|
|
else
|
|
AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, val);
|
|
}
|
|
}
|
|
|
|
|
|
/******************\
|
|
* ACK/CTS Timeouts *
|
|
\******************/
|
|
|
|
/**
|
|
* ath5k_hw_het_ack_timeout - Get ACK timeout from PCU in usec
|
|
*
|
|
* @ah: The &struct ath5k_hw
|
|
*/
|
|
unsigned int ath5k_hw_get_ack_timeout(struct ath5k_hw *ah)
|
|
{
|
|
ATH5K_TRACE(ah->ah_sc);
|
|
|
|
return ath5k_hw_clocktoh(AR5K_REG_MS(ath5k_hw_reg_read(ah,
|
|
AR5K_TIME_OUT), AR5K_TIME_OUT_ACK), ah->ah_turbo);
|
|
}
|
|
|
|
/**
|
|
* ath5k_hw_set_ack_timeout - Set ACK timeout on PCU
|
|
*
|
|
* @ah: The &struct ath5k_hw
|
|
* @timeout: Timeout in usec
|
|
*/
|
|
int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout)
|
|
{
|
|
ATH5K_TRACE(ah->ah_sc);
|
|
if (ath5k_hw_clocktoh(AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_ACK),
|
|
ah->ah_turbo) <= timeout)
|
|
return -EINVAL;
|
|
|
|
AR5K_REG_WRITE_BITS(ah, AR5K_TIME_OUT, AR5K_TIME_OUT_ACK,
|
|
ath5k_hw_htoclock(timeout, ah->ah_turbo));
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ath5k_hw_get_cts_timeout - Get CTS timeout from PCU in usec
|
|
*
|
|
* @ah: The &struct ath5k_hw
|
|
*/
|
|
unsigned int ath5k_hw_get_cts_timeout(struct ath5k_hw *ah)
|
|
{
|
|
ATH5K_TRACE(ah->ah_sc);
|
|
return ath5k_hw_clocktoh(AR5K_REG_MS(ath5k_hw_reg_read(ah,
|
|
AR5K_TIME_OUT), AR5K_TIME_OUT_CTS), ah->ah_turbo);
|
|
}
|
|
|
|
/**
|
|
* ath5k_hw_set_cts_timeout - Set CTS timeout on PCU
|
|
*
|
|
* @ah: The &struct ath5k_hw
|
|
* @timeout: Timeout in usec
|
|
*/
|
|
int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout)
|
|
{
|
|
ATH5K_TRACE(ah->ah_sc);
|
|
if (ath5k_hw_clocktoh(AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_CTS),
|
|
ah->ah_turbo) <= timeout)
|
|
return -EINVAL;
|
|
|
|
AR5K_REG_WRITE_BITS(ah, AR5K_TIME_OUT, AR5K_TIME_OUT_CTS,
|
|
ath5k_hw_htoclock(timeout, ah->ah_turbo));
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/****************\
|
|
* BSSID handling *
|
|
\****************/
|
|
|
|
/**
|
|
* ath5k_hw_get_lladdr - Get station id
|
|
*
|
|
* @ah: The &struct ath5k_hw
|
|
* @mac: The card's mac address
|
|
*
|
|
* Initialize ah->ah_sta_id using the mac address provided
|
|
* (just a memcpy).
|
|
*
|
|
* TODO: Remove it once we merge ath5k_softc and ath5k_hw
|
|
*/
|
|
void ath5k_hw_get_lladdr(struct ath5k_hw *ah, u8 *mac)
|
|
{
|
|
ATH5K_TRACE(ah->ah_sc);
|
|
memcpy(mac, ah->ah_sta_id, ETH_ALEN);
|
|
}
|
|
|
|
/**
|
|
* ath5k_hw_set_lladdr - Set station id
|
|
*
|
|
* @ah: The &struct ath5k_hw
|
|
* @mac: The card's mac address
|
|
*
|
|
* Set station id on hw using the provided mac address
|
|
*/
|
|
int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac)
|
|
{
|
|
u32 low_id, high_id;
|
|
u32 pcu_reg;
|
|
|
|
ATH5K_TRACE(ah->ah_sc);
|
|
/* Set new station ID */
|
|
memcpy(ah->ah_sta_id, mac, ETH_ALEN);
|
|
|
|
pcu_reg = ath5k_hw_reg_read(ah, AR5K_STA_ID1) & 0xffff0000;
|
|
|
|
low_id = AR5K_LOW_ID(mac);
|
|
high_id = AR5K_HIGH_ID(mac);
|
|
|
|
ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0);
|
|
ath5k_hw_reg_write(ah, pcu_reg | high_id, AR5K_STA_ID1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ath5k_hw_set_associd - Set BSSID for association
|
|
*
|
|
* @ah: The &struct ath5k_hw
|
|
* @bssid: BSSID
|
|
* @assoc_id: Assoc id
|
|
*
|
|
* Sets the BSSID which trigers the "SME Join" operation
|
|
*/
|
|
void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc_id)
|
|
{
|
|
u32 low_id, high_id;
|
|
u16 tim_offset = 0;
|
|
|
|
/*
|
|
* Set simple BSSID mask on 5212
|
|
*/
|
|
if (ah->ah_version == AR5K_AR5212) {
|
|
ath5k_hw_reg_write(ah, AR5K_LOW_ID(ah->ah_bssid_mask),
|
|
AR5K_BSS_IDM0);
|
|
ath5k_hw_reg_write(ah, AR5K_HIGH_ID(ah->ah_bssid_mask),
|
|
AR5K_BSS_IDM1);
|
|
}
|
|
|
|
/*
|
|
* Set BSSID which triggers the "SME Join" operation
|
|
*/
|
|
low_id = AR5K_LOW_ID(bssid);
|
|
high_id = AR5K_HIGH_ID(bssid);
|
|
ath5k_hw_reg_write(ah, low_id, AR5K_BSS_ID0);
|
|
ath5k_hw_reg_write(ah, high_id | ((assoc_id & 0x3fff) <<
|
|
AR5K_BSS_ID1_AID_S), AR5K_BSS_ID1);
|
|
|
|
if (assoc_id == 0) {
|
|
ath5k_hw_disable_pspoll(ah);
|
|
return;
|
|
}
|
|
|
|
AR5K_REG_WRITE_BITS(ah, AR5K_BEACON, AR5K_BEACON_TIM,
|
|
tim_offset ? tim_offset + 4 : 0);
|
|
|
|
ath5k_hw_enable_pspoll(ah, NULL, 0);
|
|
}
|
|
|
|
/**
|
|
* ath5k_hw_set_bssid_mask - filter out bssids we listen
|
|
*
|
|
* @ah: the &struct ath5k_hw
|
|
* @mask: the bssid_mask, a u8 array of size ETH_ALEN
|
|
*
|
|
* BSSID masking is a method used by AR5212 and newer hardware to inform PCU
|
|
* which bits of the interface's MAC address should be looked at when trying
|
|
* to decide which packets to ACK. In station mode and AP mode with a single
|
|
* BSS every bit matters since we lock to only one BSS. In AP mode with
|
|
* multiple BSSes (virtual interfaces) not every bit matters because hw must
|
|
* accept frames for all BSSes and so we tweak some bits of our mac address
|
|
* in order to have multiple BSSes.
|
|
*
|
|
* NOTE: This is a simple filter and does *not* filter out all
|
|
* relevant frames. Some frames that are not for us might get ACKed from us
|
|
* by PCU because they just match the mask.
|
|
*
|
|
* When handling multiple BSSes you can get the BSSID mask by computing the
|
|
* set of ~ ( MAC XOR BSSID ) for all bssids we handle.
|
|
*
|
|
* When you do this you are essentially computing the common bits of all your
|
|
* BSSes. Later it is assumed the harware will "and" (&) the BSSID mask with
|
|
* the MAC address to obtain the relevant bits and compare the result with
|
|
* (frame's BSSID & mask) to see if they match.
|
|
*/
|
|
/*
|
|
* Simple example: on your card you have have two BSSes you have created with
|
|
* BSSID-01 and BSSID-02. Lets assume BSSID-01 will not use the MAC address.
|
|
* There is another BSSID-03 but you are not part of it. For simplicity's sake,
|
|
* assuming only 4 bits for a mac address and for BSSIDs you can then have:
|
|
*
|
|
* \
|
|
* MAC: 0001 |
|
|
* BSSID-01: 0100 | --> Belongs to us
|
|
* BSSID-02: 1001 |
|
|
* /
|
|
* -------------------
|
|
* BSSID-03: 0110 | --> External
|
|
* -------------------
|
|
*
|
|
* Our bssid_mask would then be:
|
|
*
|
|
* On loop iteration for BSSID-01:
|
|
* ~(0001 ^ 0100) -> ~(0101)
|
|
* -> 1010
|
|
* bssid_mask = 1010
|
|
*
|
|
* On loop iteration for BSSID-02:
|
|
* bssid_mask &= ~(0001 ^ 1001)
|
|
* bssid_mask = (1010) & ~(0001 ^ 1001)
|
|
* bssid_mask = (1010) & ~(1001)
|
|
* bssid_mask = (1010) & (0110)
|
|
* bssid_mask = 0010
|
|
*
|
|
* A bssid_mask of 0010 means "only pay attention to the second least
|
|
* significant bit". This is because its the only bit common
|
|
* amongst the MAC and all BSSIDs we support. To findout what the real
|
|
* common bit is we can simply "&" the bssid_mask now with any BSSID we have
|
|
* or our MAC address (we assume the hardware uses the MAC address).
|
|
*
|
|
* Now, suppose there's an incoming frame for BSSID-03:
|
|
*
|
|
* IFRAME-01: 0110
|
|
*
|
|
* An easy eye-inspeciton of this already should tell you that this frame
|
|
* will not pass our check. This is beacuse the bssid_mask tells the
|
|
* hardware to only look at the second least significant bit and the
|
|
* common bit amongst the MAC and BSSIDs is 0, this frame has the 2nd LSB
|
|
* as 1, which does not match 0.
|
|
*
|
|
* So with IFRAME-01 we *assume* the hardware will do:
|
|
*
|
|
* allow = (IFRAME-01 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0;
|
|
* --> allow = (0110 & 0010) == (0010 & 0001) ? 1 : 0;
|
|
* --> allow = (0010) == 0000 ? 1 : 0;
|
|
* --> allow = 0
|
|
*
|
|
* Lets now test a frame that should work:
|
|
*
|
|
* IFRAME-02: 0001 (we should allow)
|
|
*
|
|
* allow = (0001 & 1010) == 1010
|
|
*
|
|
* allow = (IFRAME-02 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0;
|
|
* --> allow = (0001 & 0010) == (0010 & 0001) ? 1 :0;
|
|
* --> allow = (0010) == (0010)
|
|
* --> allow = 1
|
|
*
|
|
* Other examples:
|
|
*
|
|
* IFRAME-03: 0100 --> allowed
|
|
* IFRAME-04: 1001 --> allowed
|
|
* IFRAME-05: 1101 --> allowed but its not for us!!!
|
|
*
|
|
*/
|
|
int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask)
|
|
{
|
|
u32 low_id, high_id;
|
|
ATH5K_TRACE(ah->ah_sc);
|
|
|
|
/* Cache bssid mask so that we can restore it
|
|
* on reset */
|
|
memcpy(ah->ah_bssid_mask, mask, ETH_ALEN);
|
|
if (ah->ah_version == AR5K_AR5212) {
|
|
low_id = AR5K_LOW_ID(mask);
|
|
high_id = AR5K_HIGH_ID(mask);
|
|
|
|
ath5k_hw_reg_write(ah, low_id, AR5K_BSS_IDM0);
|
|
ath5k_hw_reg_write(ah, high_id, AR5K_BSS_IDM1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
return -EIO;
|
|
}
|
|
|
|
|
|
/************\
|
|
* RX Control *
|
|
\************/
|
|
|
|
/**
|
|
* ath5k_hw_start_rx_pcu - Start RX engine
|
|
*
|
|
* @ah: The &struct ath5k_hw
|
|
*
|
|
* Starts RX engine on PCU so that hw can process RXed frames
|
|
* (ACK etc).
|
|
*
|
|
* NOTE: RX DMA should be already enabled using ath5k_hw_start_rx_dma
|
|
* TODO: Init ANI here
|
|
*/
|
|
void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah)
|
|
{
|
|
ATH5K_TRACE(ah->ah_sc);
|
|
AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX);
|
|
}
|
|
|
|
/**
|
|
* at5k_hw_stop_rx_pcu - Stop RX engine
|
|
*
|
|
* @ah: The &struct ath5k_hw
|
|
*
|
|
* Stops RX engine on PCU
|
|
*
|
|
* TODO: Detach ANI here
|
|
*/
|
|
void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah)
|
|
{
|
|
ATH5K_TRACE(ah->ah_sc);
|
|
AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX);
|
|
}
|
|
|
|
/*
|
|
* Set multicast filter
|
|
*/
|
|
void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1)
|
|
{
|
|
ATH5K_TRACE(ah->ah_sc);
|
|
/* Set the multicat filter */
|
|
ath5k_hw_reg_write(ah, filter0, AR5K_MCAST_FILTER0);
|
|
ath5k_hw_reg_write(ah, filter1, AR5K_MCAST_FILTER1);
|
|
}
|
|
|
|
/*
|
|
* Set multicast filter by index
|
|
*/
|
|
int ath5k_hw_set_mcast_filter_idx(struct ath5k_hw *ah, u32 index)
|
|
{
|
|
|
|
ATH5K_TRACE(ah->ah_sc);
|
|
if (index >= 64)
|
|
return -EINVAL;
|
|
else if (index >= 32)
|
|
AR5K_REG_ENABLE_BITS(ah, AR5K_MCAST_FILTER1,
|
|
(1 << (index - 32)));
|
|
else
|
|
AR5K_REG_ENABLE_BITS(ah, AR5K_MCAST_FILTER0, (1 << index));
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Clear Multicast filter by index
|
|
*/
|
|
int ath5k_hw_clear_mcast_filter_idx(struct ath5k_hw *ah, u32 index)
|
|
{
|
|
|
|
ATH5K_TRACE(ah->ah_sc);
|
|
if (index >= 64)
|
|
return -EINVAL;
|
|
else if (index >= 32)
|
|
AR5K_REG_DISABLE_BITS(ah, AR5K_MCAST_FILTER1,
|
|
(1 << (index - 32)));
|
|
else
|
|
AR5K_REG_DISABLE_BITS(ah, AR5K_MCAST_FILTER0, (1 << index));
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ath5k_hw_get_rx_filter - Get current rx filter
|
|
*
|
|
* @ah: The &struct ath5k_hw
|
|
*
|
|
* Returns the RX filter by reading rx filter and
|
|
* phy error filter registers. RX filter is used
|
|
* to set the allowed frame types that PCU will accept
|
|
* and pass to the driver. For a list of frame types
|
|
* check out reg.h.
|
|
*/
|
|
u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah)
|
|
{
|
|
u32 data, filter = 0;
|
|
|
|
ATH5K_TRACE(ah->ah_sc);
|
|
filter = ath5k_hw_reg_read(ah, AR5K_RX_FILTER);
|
|
|
|
/*Radar detection for 5212*/
|
|
if (ah->ah_version == AR5K_AR5212) {
|
|
data = ath5k_hw_reg_read(ah, AR5K_PHY_ERR_FIL);
|
|
|
|
if (data & AR5K_PHY_ERR_FIL_RADAR)
|
|
filter |= AR5K_RX_FILTER_RADARERR;
|
|
if (data & (AR5K_PHY_ERR_FIL_OFDM | AR5K_PHY_ERR_FIL_CCK))
|
|
filter |= AR5K_RX_FILTER_PHYERR;
|
|
}
|
|
|
|
return filter;
|
|
}
|
|
|
|
/**
|
|
* ath5k_hw_set_rx_filter - Set rx filter
|
|
*
|
|
* @ah: The &struct ath5k_hw
|
|
* @filter: RX filter mask (see reg.h)
|
|
*
|
|
* Sets RX filter register and also handles PHY error filter
|
|
* register on 5212 and newer chips so that we have proper PHY
|
|
* error reporting.
|
|
*/
|
|
void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter)
|
|
{
|
|
u32 data = 0;
|
|
|
|
ATH5K_TRACE(ah->ah_sc);
|
|
|
|
/* Set PHY error filter register on 5212*/
|
|
if (ah->ah_version == AR5K_AR5212) {
|
|
if (filter & AR5K_RX_FILTER_RADARERR)
|
|
data |= AR5K_PHY_ERR_FIL_RADAR;
|
|
if (filter & AR5K_RX_FILTER_PHYERR)
|
|
data |= AR5K_PHY_ERR_FIL_OFDM | AR5K_PHY_ERR_FIL_CCK;
|
|
}
|
|
|
|
/*
|
|
* The AR5210 uses promiscous mode to detect radar activity
|
|
*/
|
|
if (ah->ah_version == AR5K_AR5210 &&
|
|
(filter & AR5K_RX_FILTER_RADARERR)) {
|
|
filter &= ~AR5K_RX_FILTER_RADARERR;
|
|
filter |= AR5K_RX_FILTER_PROM;
|
|
}
|
|
|
|
/*Zero length DMA (phy error reporting) */
|
|
if (data)
|
|
AR5K_REG_ENABLE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_ZLFDMA);
|
|
else
|
|
AR5K_REG_DISABLE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_ZLFDMA);
|
|
|
|
/*Write RX Filter register*/
|
|
ath5k_hw_reg_write(ah, filter & 0xff, AR5K_RX_FILTER);
|
|
|
|
/*Write PHY error filter register on 5212*/
|
|
if (ah->ah_version == AR5K_AR5212)
|
|
ath5k_hw_reg_write(ah, data, AR5K_PHY_ERR_FIL);
|
|
|
|
}
|
|
|
|
|
|
/****************\
|
|
* Beacon control *
|
|
\****************/
|
|
|
|
/**
|
|
* ath5k_hw_get_tsf32 - Get a 32bit TSF
|
|
*
|
|
* @ah: The &struct ath5k_hw
|
|
*
|
|
* Returns lower 32 bits of current TSF
|
|
*/
|
|
u32 ath5k_hw_get_tsf32(struct ath5k_hw *ah)
|
|
{
|
|
ATH5K_TRACE(ah->ah_sc);
|
|
return ath5k_hw_reg_read(ah, AR5K_TSF_L32);
|
|
}
|
|
|
|
/**
|
|
* ath5k_hw_get_tsf64 - Get the full 64bit TSF
|
|
*
|
|
* @ah: The &struct ath5k_hw
|
|
*
|
|
* Returns the current TSF
|
|
*/
|
|
u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah)
|
|
{
|
|
u64 tsf = ath5k_hw_reg_read(ah, AR5K_TSF_U32);
|
|
ATH5K_TRACE(ah->ah_sc);
|
|
|
|
return ath5k_hw_reg_read(ah, AR5K_TSF_L32) | (tsf << 32);
|
|
}
|
|
|
|
/**
|
|
* ath5k_hw_set_tsf64 - Set a new 64bit TSF
|
|
*
|
|
* @ah: The &struct ath5k_hw
|
|
* @tsf64: The new 64bit TSF
|
|
*
|
|
* Sets the new TSF
|
|
*/
|
|
void ath5k_hw_set_tsf64(struct ath5k_hw *ah, u64 tsf64)
|
|
{
|
|
ATH5K_TRACE(ah->ah_sc);
|
|
|
|
ath5k_hw_reg_write(ah, tsf64 & 0xffffffff, AR5K_TSF_L32);
|
|
ath5k_hw_reg_write(ah, (tsf64 >> 32) & 0xffffffff, AR5K_TSF_U32);
|
|
}
|
|
|
|
/**
|
|
* ath5k_hw_reset_tsf - Force a TSF reset
|
|
*
|
|
* @ah: The &struct ath5k_hw
|
|
*
|
|
* Forces a TSF reset on PCU
|
|
*/
|
|
void ath5k_hw_reset_tsf(struct ath5k_hw *ah)
|
|
{
|
|
u32 val;
|
|
|
|
ATH5K_TRACE(ah->ah_sc);
|
|
|
|
val = ath5k_hw_reg_read(ah, AR5K_BEACON) | AR5K_BEACON_RESET_TSF;
|
|
|
|
/*
|
|
* Each write to the RESET_TSF bit toggles a hardware internal
|
|
* signal to reset TSF, but if left high it will cause a TSF reset
|
|
* on the next chip reset as well. Thus we always write the value
|
|
* twice to clear the signal.
|
|
*/
|
|
ath5k_hw_reg_write(ah, val, AR5K_BEACON);
|
|
ath5k_hw_reg_write(ah, val, AR5K_BEACON);
|
|
}
|
|
|
|
/*
|
|
* Initialize beacon timers
|
|
*/
|
|
void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval)
|
|
{
|
|
u32 timer1, timer2, timer3;
|
|
|
|
ATH5K_TRACE(ah->ah_sc);
|
|
/*
|
|
* Set the additional timers by mode
|
|
*/
|
|
switch (ah->ah_op_mode) {
|
|
case NL80211_IFTYPE_MONITOR:
|
|
case NL80211_IFTYPE_STATION:
|
|
/* In STA mode timer1 is used as next wakeup
|
|
* timer and timer2 as next CFP duration start
|
|
* timer. Both in 1/8TUs. */
|
|
/* TODO: PCF handling */
|
|
if (ah->ah_version == AR5K_AR5210) {
|
|
timer1 = 0xffffffff;
|
|
timer2 = 0xffffffff;
|
|
} else {
|
|
timer1 = 0x0000ffff;
|
|
timer2 = 0x0007ffff;
|
|
}
|
|
/* Mark associated AP as PCF incapable for now */
|
|
AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, AR5K_STA_ID1_PCF);
|
|
break;
|
|
case NL80211_IFTYPE_ADHOC:
|
|
AR5K_REG_ENABLE_BITS(ah, AR5K_TXCFG, AR5K_TXCFG_ADHOC_BCN_ATIM);
|
|
default:
|
|
/* On non-STA modes timer1 is used as next DMA
|
|
* beacon alert (DBA) timer and timer2 as next
|
|
* software beacon alert. Both in 1/8TUs. */
|
|
timer1 = (next_beacon - AR5K_TUNE_DMA_BEACON_RESP) << 3;
|
|
timer2 = (next_beacon - AR5K_TUNE_SW_BEACON_RESP) << 3;
|
|
break;
|
|
}
|
|
|
|
/* Timer3 marks the end of our ATIM window
|
|
* a zero length window is not allowed because
|
|
* we 'll get no beacons */
|
|
timer3 = next_beacon + (ah->ah_atim_window ? ah->ah_atim_window : 1);
|
|
|
|
/*
|
|
* Set the beacon register and enable all timers.
|
|
*/
|
|
/* When in AP or Mesh Point mode zero timer0 to start TSF */
|
|
if (ah->ah_op_mode == NL80211_IFTYPE_AP ||
|
|
ah->ah_op_mode == NL80211_IFTYPE_MESH_POINT)
|
|
ath5k_hw_reg_write(ah, 0, AR5K_TIMER0);
|
|
|
|
ath5k_hw_reg_write(ah, next_beacon, AR5K_TIMER0);
|
|
ath5k_hw_reg_write(ah, timer1, AR5K_TIMER1);
|
|
ath5k_hw_reg_write(ah, timer2, AR5K_TIMER2);
|
|
ath5k_hw_reg_write(ah, timer3, AR5K_TIMER3);
|
|
|
|
/* Force a TSF reset if requested and enable beacons */
|
|
if (interval & AR5K_BEACON_RESET_TSF)
|
|
ath5k_hw_reset_tsf(ah);
|
|
|
|
ath5k_hw_reg_write(ah, interval & (AR5K_BEACON_PERIOD |
|
|
AR5K_BEACON_ENABLE),
|
|
AR5K_BEACON);
|
|
|
|
/* Flush any pending BMISS interrupts on ISR by
|
|
* performing a clear-on-write operation on PISR
|
|
* register for the BMISS bit (writing a bit on
|
|
* ISR togles a reset for that bit and leaves
|
|
* the rest bits intact) */
|
|
if (ah->ah_version == AR5K_AR5210)
|
|
ath5k_hw_reg_write(ah, AR5K_ISR_BMISS, AR5K_ISR);
|
|
else
|
|
ath5k_hw_reg_write(ah, AR5K_ISR_BMISS, AR5K_PISR);
|
|
|
|
/* TODO: Set enchanced sleep registers on AR5212
|
|
* based on vif->bss_conf params, until then
|
|
* disable power save reporting.*/
|
|
AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, AR5K_STA_ID1_PWR_SV);
|
|
|
|
}
|
|
|
|
#if 0
|
|
/*
|
|
* Set beacon timers
|
|
*/
|
|
int ath5k_hw_set_beacon_timers(struct ath5k_hw *ah,
|
|
const struct ath5k_beacon_state *state)
|
|
{
|
|
u32 cfp_period, next_cfp, dtim, interval, next_beacon;
|
|
|
|
/*
|
|
* TODO: should be changed through *state
|
|
* review struct ath5k_beacon_state struct
|
|
*
|
|
* XXX: These are used for cfp period bellow, are they
|
|
* ok ? Is it O.K. for tsf here to be 0 or should we use
|
|
* get_tsf ?
|
|
*/
|
|
u32 dtim_count = 0; /* XXX */
|
|
u32 cfp_count = 0; /* XXX */
|
|
u32 tsf = 0; /* XXX */
|
|
|
|
ATH5K_TRACE(ah->ah_sc);
|
|
/* Return on an invalid beacon state */
|
|
if (state->bs_interval < 1)
|
|
return -EINVAL;
|
|
|
|
interval = state->bs_interval;
|
|
dtim = state->bs_dtim_period;
|
|
|
|
/*
|
|
* PCF support?
|
|
*/
|
|
if (state->bs_cfp_period > 0) {
|
|
/*
|
|
* Enable PCF mode and set the CFP
|
|
* (Contention Free Period) and timer registers
|
|
*/
|
|
cfp_period = state->bs_cfp_period * state->bs_dtim_period *
|
|
state->bs_interval;
|
|
next_cfp = (cfp_count * state->bs_dtim_period + dtim_count) *
|
|
state->bs_interval;
|
|
|
|
AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1,
|
|
AR5K_STA_ID1_DEFAULT_ANTENNA |
|
|
AR5K_STA_ID1_PCF);
|
|
ath5k_hw_reg_write(ah, cfp_period, AR5K_CFP_PERIOD);
|
|
ath5k_hw_reg_write(ah, state->bs_cfp_max_duration,
|
|
AR5K_CFP_DUR);
|
|
ath5k_hw_reg_write(ah, (tsf + (next_cfp == 0 ? cfp_period :
|
|
next_cfp)) << 3, AR5K_TIMER2);
|
|
} else {
|
|
/* Disable PCF mode */
|
|
AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1,
|
|
AR5K_STA_ID1_DEFAULT_ANTENNA |
|
|
AR5K_STA_ID1_PCF);
|
|
}
|
|
|
|
/*
|
|
* Enable the beacon timer register
|
|
*/
|
|
ath5k_hw_reg_write(ah, state->bs_next_beacon, AR5K_TIMER0);
|
|
|
|
/*
|
|
* Start the beacon timers
|
|
*/
|
|
ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, AR5K_BEACON) &
|
|
~(AR5K_BEACON_PERIOD | AR5K_BEACON_TIM)) |
|
|
AR5K_REG_SM(state->bs_tim_offset ? state->bs_tim_offset + 4 : 0,
|
|
AR5K_BEACON_TIM) | AR5K_REG_SM(state->bs_interval,
|
|
AR5K_BEACON_PERIOD), AR5K_BEACON);
|
|
|
|
/*
|
|
* Write new beacon miss threshold, if it appears to be valid
|
|
* XXX: Figure out right values for min <= bs_bmiss_threshold <= max
|
|
* and return if its not in range. We can test this by reading value and
|
|
* setting value to a largest value and seeing which values register.
|
|
*/
|
|
|
|
AR5K_REG_WRITE_BITS(ah, AR5K_RSSI_THR, AR5K_RSSI_THR_BMISS,
|
|
state->bs_bmiss_threshold);
|
|
|
|
/*
|
|
* Set sleep control register
|
|
* XXX: Didn't find this in 5210 code but since this register
|
|
* exists also in ar5k's 5210 headers i leave it as common code.
|
|
*/
|
|
AR5K_REG_WRITE_BITS(ah, AR5K_SLEEP_CTL, AR5K_SLEEP_CTL_SLDUR,
|
|
(state->bs_sleep_duration - 3) << 3);
|
|
|
|
/*
|
|
* Set enhanced sleep registers on 5212
|
|
*/
|
|
if (ah->ah_version == AR5K_AR5212) {
|
|
if (state->bs_sleep_duration > state->bs_interval &&
|
|
roundup(state->bs_sleep_duration, interval) ==
|
|
state->bs_sleep_duration)
|
|
interval = state->bs_sleep_duration;
|
|
|
|
if (state->bs_sleep_duration > dtim && (dtim == 0 ||
|
|
roundup(state->bs_sleep_duration, dtim) ==
|
|
state->bs_sleep_duration))
|
|
dtim = state->bs_sleep_duration;
|
|
|
|
if (interval > dtim)
|
|
return -EINVAL;
|
|
|
|
next_beacon = interval == dtim ? state->bs_next_dtim :
|
|
state->bs_next_beacon;
|
|
|
|
ath5k_hw_reg_write(ah,
|
|
AR5K_REG_SM((state->bs_next_dtim - 3) << 3,
|
|
AR5K_SLEEP0_NEXT_DTIM) |
|
|
AR5K_REG_SM(10, AR5K_SLEEP0_CABTO) |
|
|
AR5K_SLEEP0_ENH_SLEEP_EN |
|
|
AR5K_SLEEP0_ASSUME_DTIM, AR5K_SLEEP0);
|
|
|
|
ath5k_hw_reg_write(ah, AR5K_REG_SM((next_beacon - 3) << 3,
|
|
AR5K_SLEEP1_NEXT_TIM) |
|
|
AR5K_REG_SM(10, AR5K_SLEEP1_BEACON_TO), AR5K_SLEEP1);
|
|
|
|
ath5k_hw_reg_write(ah,
|
|
AR5K_REG_SM(interval, AR5K_SLEEP2_TIM_PER) |
|
|
AR5K_REG_SM(dtim, AR5K_SLEEP2_DTIM_PER), AR5K_SLEEP2);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Reset beacon timers
|
|
*/
|
|
void ath5k_hw_reset_beacon(struct ath5k_hw *ah)
|
|
{
|
|
ATH5K_TRACE(ah->ah_sc);
|
|
/*
|
|
* Disable beacon timer
|
|
*/
|
|
ath5k_hw_reg_write(ah, 0, AR5K_TIMER0);
|
|
|
|
/*
|
|
* Disable some beacon register values
|
|
*/
|
|
AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1,
|
|
AR5K_STA_ID1_DEFAULT_ANTENNA | AR5K_STA_ID1_PCF);
|
|
ath5k_hw_reg_write(ah, AR5K_BEACON_PERIOD, AR5K_BEACON);
|
|
}
|
|
|
|
/*
|
|
* Wait for beacon queue to finish
|
|
*/
|
|
int ath5k_hw_beaconq_finish(struct ath5k_hw *ah, unsigned long phys_addr)
|
|
{
|
|
unsigned int i;
|
|
int ret;
|
|
|
|
ATH5K_TRACE(ah->ah_sc);
|
|
|
|
/* 5210 doesn't have QCU*/
|
|
if (ah->ah_version == AR5K_AR5210) {
|
|
/*
|
|
* Wait for beaconn queue to finish by checking
|
|
* Control Register and Beacon Status Register.
|
|
*/
|
|
for (i = AR5K_TUNE_BEACON_INTERVAL / 2; i > 0; i--) {
|
|
if (!(ath5k_hw_reg_read(ah, AR5K_BSR) & AR5K_BSR_TXQ1F)
|
|
||
|
|
!(ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_BSR_TXQ1F))
|
|
break;
|
|
udelay(10);
|
|
}
|
|
|
|
/* Timeout... */
|
|
if (i <= 0) {
|
|
/*
|
|
* Re-schedule the beacon queue
|
|
*/
|
|
ath5k_hw_reg_write(ah, phys_addr, AR5K_NOQCU_TXDP1);
|
|
ath5k_hw_reg_write(ah, AR5K_BCR_TQ1V | AR5K_BCR_BDMAE,
|
|
AR5K_BCR);
|
|
|
|
return -EIO;
|
|
}
|
|
ret = 0;
|
|
} else {
|
|
/*5211/5212*/
|
|
ret = ath5k_hw_register_timeout(ah,
|
|
AR5K_QUEUE_STATUS(AR5K_TX_QUEUE_ID_BEACON),
|
|
AR5K_QCU_STS_FRMPENDCNT, 0, false);
|
|
|
|
if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, AR5K_TX_QUEUE_ID_BEACON))
|
|
return -EIO;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
|
|
/*********************\
|
|
* Key table functions *
|
|
\*********************/
|
|
|
|
/*
|
|
* Reset a key entry on the table
|
|
*/
|
|
int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry)
|
|
{
|
|
unsigned int i, type;
|
|
u16 micentry = entry + AR5K_KEYTABLE_MIC_OFFSET;
|
|
|
|
ATH5K_TRACE(ah->ah_sc);
|
|
AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE);
|
|
|
|
type = ath5k_hw_reg_read(ah, AR5K_KEYTABLE_TYPE(entry));
|
|
|
|
for (i = 0; i < AR5K_KEYCACHE_SIZE; i++)
|
|
ath5k_hw_reg_write(ah, 0, AR5K_KEYTABLE_OFF(entry, i));
|
|
|
|
/* Reset associated MIC entry if TKIP
|
|
* is enabled located at offset (entry + 64) */
|
|
if (type == AR5K_KEYTABLE_TYPE_TKIP) {
|
|
AR5K_ASSERT_ENTRY(micentry, AR5K_KEYTABLE_SIZE);
|
|
for (i = 0; i < AR5K_KEYCACHE_SIZE / 2 ; i++)
|
|
ath5k_hw_reg_write(ah, 0,
|
|
AR5K_KEYTABLE_OFF(micentry, i));
|
|
}
|
|
|
|
/*
|
|
* Set NULL encryption on AR5212+
|
|
*
|
|
* Note: AR5K_KEYTABLE_TYPE -> AR5K_KEYTABLE_OFF(entry, 5)
|
|
* AR5K_KEYTABLE_TYPE_NULL -> 0x00000007
|
|
*
|
|
* Note2: Windows driver (ndiswrapper) sets this to
|
|
* 0x00000714 instead of 0x00000007
|
|
*/
|
|
if (ah->ah_version >= AR5K_AR5211) {
|
|
ath5k_hw_reg_write(ah, AR5K_KEYTABLE_TYPE_NULL,
|
|
AR5K_KEYTABLE_TYPE(entry));
|
|
|
|
if (type == AR5K_KEYTABLE_TYPE_TKIP) {
|
|
ath5k_hw_reg_write(ah, AR5K_KEYTABLE_TYPE_NULL,
|
|
AR5K_KEYTABLE_TYPE(micentry));
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Check if a table entry is valid
|
|
*/
|
|
int ath5k_hw_is_key_valid(struct ath5k_hw *ah, u16 entry)
|
|
{
|
|
ATH5K_TRACE(ah->ah_sc);
|
|
AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE);
|
|
|
|
/* Check the validation flag at the end of the entry */
|
|
return ath5k_hw_reg_read(ah, AR5K_KEYTABLE_MAC1(entry)) &
|
|
AR5K_KEYTABLE_VALID;
|
|
}
|
|
|
|
static
|
|
int ath5k_keycache_type(const struct ieee80211_key_conf *key)
|
|
{
|
|
switch (key->alg) {
|
|
case ALG_TKIP:
|
|
return AR5K_KEYTABLE_TYPE_TKIP;
|
|
case ALG_CCMP:
|
|
return AR5K_KEYTABLE_TYPE_CCM;
|
|
case ALG_WEP:
|
|
if (key->keylen == WLAN_KEY_LEN_WEP40)
|
|
return AR5K_KEYTABLE_TYPE_40;
|
|
else if (key->keylen == WLAN_KEY_LEN_WEP104)
|
|
return AR5K_KEYTABLE_TYPE_104;
|
|
return -EINVAL;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* Set a key entry on the table
|
|
*/
|
|
int ath5k_hw_set_key(struct ath5k_hw *ah, u16 entry,
|
|
const struct ieee80211_key_conf *key, const u8 *mac)
|
|
{
|
|
unsigned int i;
|
|
int keylen;
|
|
__le32 key_v[5] = {};
|
|
__le32 key0 = 0, key1 = 0;
|
|
__le32 *rxmic, *txmic;
|
|
int keytype;
|
|
u16 micentry = entry + AR5K_KEYTABLE_MIC_OFFSET;
|
|
bool is_tkip;
|
|
const u8 *key_ptr;
|
|
|
|
ATH5K_TRACE(ah->ah_sc);
|
|
|
|
is_tkip = (key->alg == ALG_TKIP);
|
|
|
|
/*
|
|
* key->keylen comes in from mac80211 in bytes.
|
|
* TKIP is 128 bit + 128 bit mic
|
|
*/
|
|
keylen = (is_tkip) ? (128 / 8) : key->keylen;
|
|
|
|
if (entry > AR5K_KEYTABLE_SIZE ||
|
|
(is_tkip && micentry > AR5K_KEYTABLE_SIZE))
|
|
return -EOPNOTSUPP;
|
|
|
|
if (unlikely(keylen > 16))
|
|
return -EOPNOTSUPP;
|
|
|
|
keytype = ath5k_keycache_type(key);
|
|
if (keytype < 0)
|
|
return keytype;
|
|
|
|
/*
|
|
* each key block is 6 bytes wide, written as pairs of
|
|
* alternating 32 and 16 bit le values.
|
|
*/
|
|
key_ptr = key->key;
|
|
for (i = 0; keylen >= 6; keylen -= 6) {
|
|
memcpy(&key_v[i], key_ptr, 6);
|
|
i += 2;
|
|
key_ptr += 6;
|
|
}
|
|
if (keylen)
|
|
memcpy(&key_v[i], key_ptr, keylen);
|
|
|
|
/* intentionally corrupt key until mic is installed */
|
|
if (is_tkip) {
|
|
key0 = key_v[0] = ~key_v[0];
|
|
key1 = key_v[1] = ~key_v[1];
|
|
}
|
|
|
|
for (i = 0; i < ARRAY_SIZE(key_v); i++)
|
|
ath5k_hw_reg_write(ah, le32_to_cpu(key_v[i]),
|
|
AR5K_KEYTABLE_OFF(entry, i));
|
|
|
|
ath5k_hw_reg_write(ah, keytype, AR5K_KEYTABLE_TYPE(entry));
|
|
|
|
if (is_tkip) {
|
|
/* Install rx/tx MIC */
|
|
rxmic = (__le32 *) &key->key[16];
|
|
txmic = (__le32 *) &key->key[24];
|
|
|
|
if (ah->ah_combined_mic) {
|
|
key_v[0] = rxmic[0];
|
|
key_v[1] = cpu_to_le32(le32_to_cpu(txmic[0]) >> 16);
|
|
key_v[2] = rxmic[1];
|
|
key_v[3] = cpu_to_le32(le32_to_cpu(txmic[0]) & 0xffff);
|
|
key_v[4] = txmic[1];
|
|
} else {
|
|
key_v[0] = rxmic[0];
|
|
key_v[1] = 0;
|
|
key_v[2] = rxmic[1];
|
|
key_v[3] = 0;
|
|
key_v[4] = 0;
|
|
}
|
|
for (i = 0; i < ARRAY_SIZE(key_v); i++)
|
|
ath5k_hw_reg_write(ah, le32_to_cpu(key_v[i]),
|
|
AR5K_KEYTABLE_OFF(micentry, i));
|
|
|
|
ath5k_hw_reg_write(ah, AR5K_KEYTABLE_TYPE_NULL,
|
|
AR5K_KEYTABLE_TYPE(micentry));
|
|
ath5k_hw_reg_write(ah, 0, AR5K_KEYTABLE_MAC0(micentry));
|
|
ath5k_hw_reg_write(ah, 0, AR5K_KEYTABLE_MAC1(micentry));
|
|
|
|
/* restore first 2 words of key */
|
|
ath5k_hw_reg_write(ah, le32_to_cpu(~key0),
|
|
AR5K_KEYTABLE_OFF(entry, 0));
|
|
ath5k_hw_reg_write(ah, le32_to_cpu(~key1),
|
|
AR5K_KEYTABLE_OFF(entry, 1));
|
|
}
|
|
|
|
return ath5k_hw_set_key_lladdr(ah, entry, mac);
|
|
}
|
|
|
|
int ath5k_hw_set_key_lladdr(struct ath5k_hw *ah, u16 entry, const u8 *mac)
|
|
{
|
|
u32 low_id, high_id;
|
|
|
|
ATH5K_TRACE(ah->ah_sc);
|
|
/* Invalid entry (key table overflow) */
|
|
AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE);
|
|
|
|
/* MAC may be NULL if it's a broadcast key. In this case no need to
|
|
* to compute AR5K_LOW_ID and AR5K_HIGH_ID as we already know it. */
|
|
if (!mac) {
|
|
low_id = 0xffffffff;
|
|
high_id = 0xffff | AR5K_KEYTABLE_VALID;
|
|
} else {
|
|
low_id = AR5K_LOW_ID(mac);
|
|
high_id = AR5K_HIGH_ID(mac) | AR5K_KEYTABLE_VALID;
|
|
}
|
|
|
|
ath5k_hw_reg_write(ah, low_id, AR5K_KEYTABLE_MAC0(entry));
|
|
ath5k_hw_reg_write(ah, high_id, AR5K_KEYTABLE_MAC1(entry));
|
|
|
|
return 0;
|
|
}
|
|
|