364 lines
8.8 KiB
C
364 lines
8.8 KiB
C
/*
|
|
* MPC85xx setup and early boot code plus other random bits.
|
|
*
|
|
* Maintained by Kumar Gala (see MAINTAINERS for contact information)
|
|
*
|
|
* Copyright 2005 Freescale Semiconductor Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
#include <linux/stddef.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/reboot.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/kdev_t.h>
|
|
#include <linux/major.h>
|
|
#include <linux/console.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/initrd.h>
|
|
#include <linux/module.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/fsl_devices.h>
|
|
#include <linux/of_platform.h>
|
|
|
|
#include <asm/system.h>
|
|
#include <asm/pgtable.h>
|
|
#include <asm/page.h>
|
|
#include <asm/atomic.h>
|
|
#include <asm/time.h>
|
|
#include <asm/io.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/ipic.h>
|
|
#include <asm/pci-bridge.h>
|
|
#include <asm/irq.h>
|
|
#include <mm/mmu_decl.h>
|
|
#include <asm/prom.h>
|
|
#include <asm/udbg.h>
|
|
#include <asm/mpic.h>
|
|
#include <asm/i8259.h>
|
|
|
|
#include <sysdev/fsl_soc.h>
|
|
#include <sysdev/fsl_pci.h>
|
|
|
|
/* CADMUS info */
|
|
/* xxx - galak, move into device tree */
|
|
#define CADMUS_BASE (0xf8004000)
|
|
#define CADMUS_SIZE (256)
|
|
#define CM_VER (0)
|
|
#define CM_CSR (1)
|
|
#define CM_RST (2)
|
|
|
|
|
|
static int cds_pci_slot = 2;
|
|
static volatile u8 *cadmus;
|
|
|
|
#ifdef CONFIG_PCI
|
|
|
|
#define ARCADIA_HOST_BRIDGE_IDSEL 17
|
|
#define ARCADIA_2ND_BRIDGE_IDSEL 3
|
|
|
|
static int mpc85xx_exclude_device(struct pci_controller *hose,
|
|
u_char bus, u_char devfn)
|
|
{
|
|
/* We explicitly do not go past the Tundra 320 Bridge */
|
|
if ((bus == 1) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL))
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
if ((bus == 0) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL))
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
else
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
static void mpc85xx_cds_restart(char *cmd)
|
|
{
|
|
struct pci_dev *dev;
|
|
u_char tmp;
|
|
|
|
if ((dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686,
|
|
NULL))) {
|
|
|
|
/* Use the VIA Super Southbridge to force a PCI reset */
|
|
pci_read_config_byte(dev, 0x47, &tmp);
|
|
pci_write_config_byte(dev, 0x47, tmp | 1);
|
|
|
|
/* Flush the outbound PCI write queues */
|
|
pci_read_config_byte(dev, 0x47, &tmp);
|
|
|
|
/*
|
|
* At this point, the harware reset should have triggered.
|
|
* However, if it doesn't work for some mysterious reason,
|
|
* just fall through to the default reset below.
|
|
*/
|
|
|
|
pci_dev_put(dev);
|
|
}
|
|
|
|
/*
|
|
* If we can't find the VIA chip (maybe the P2P bridge is disabled)
|
|
* or the VIA chip reset didn't work, just use the default reset.
|
|
*/
|
|
fsl_rstcr_restart(NULL);
|
|
}
|
|
|
|
static void __init mpc85xx_cds_pci_irq_fixup(struct pci_dev *dev)
|
|
{
|
|
u_char c;
|
|
if (dev->vendor == PCI_VENDOR_ID_VIA) {
|
|
switch (dev->device) {
|
|
case PCI_DEVICE_ID_VIA_82C586_1:
|
|
/*
|
|
* U-Boot does not set the enable bits
|
|
* for the IDE device. Force them on here.
|
|
*/
|
|
pci_read_config_byte(dev, 0x40, &c);
|
|
c |= 0x03; /* IDE: Chip Enable Bits */
|
|
pci_write_config_byte(dev, 0x40, c);
|
|
|
|
/*
|
|
* Since only primary interface works, force the
|
|
* IDE function to standard primary IDE interrupt
|
|
* w/ 8259 offset
|
|
*/
|
|
dev->irq = 14;
|
|
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
|
|
break;
|
|
/*
|
|
* Force legacy USB interrupt routing
|
|
*/
|
|
case PCI_DEVICE_ID_VIA_82C586_2:
|
|
/* There are two USB controllers.
|
|
* Identify them by functon number
|
|
*/
|
|
if (PCI_FUNC(dev->devfn) == 3)
|
|
dev->irq = 11;
|
|
else
|
|
dev->irq = 10;
|
|
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void __devinit skip_fake_bridge(struct pci_dev *dev)
|
|
{
|
|
/* Make it an error to skip the fake bridge
|
|
* in pci_setup_device() in probe.c */
|
|
dev->hdr_type = 0x7f;
|
|
}
|
|
DECLARE_PCI_FIXUP_EARLY(0x1957, 0x3fff, skip_fake_bridge);
|
|
DECLARE_PCI_FIXUP_EARLY(0x3fff, 0x1957, skip_fake_bridge);
|
|
DECLARE_PCI_FIXUP_EARLY(0xff3f, 0x5719, skip_fake_bridge);
|
|
|
|
#ifdef CONFIG_PPC_I8259
|
|
static void mpc85xx_8259_cascade_handler(unsigned int irq,
|
|
struct irq_desc *desc)
|
|
{
|
|
unsigned int cascade_irq = i8259_irq();
|
|
|
|
if (cascade_irq != NO_IRQ)
|
|
/* handle an interrupt from the 8259 */
|
|
generic_handle_irq(cascade_irq);
|
|
|
|
/* check for any interrupts from the shared IRQ line */
|
|
handle_fasteoi_irq(irq, desc);
|
|
}
|
|
|
|
static irqreturn_t mpc85xx_8259_cascade_action(int irq, void *dev_id)
|
|
{
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static struct irqaction mpc85xxcds_8259_irqaction = {
|
|
.handler = mpc85xx_8259_cascade_action,
|
|
.flags = IRQF_SHARED,
|
|
.name = "8259 cascade",
|
|
};
|
|
#endif /* PPC_I8259 */
|
|
#endif /* CONFIG_PCI */
|
|
|
|
static void __init mpc85xx_cds_pic_init(void)
|
|
{
|
|
struct mpic *mpic;
|
|
struct resource r;
|
|
struct device_node *np = NULL;
|
|
|
|
np = of_find_node_by_type(np, "open-pic");
|
|
|
|
if (np == NULL) {
|
|
printk(KERN_ERR "Could not find open-pic node\n");
|
|
return;
|
|
}
|
|
|
|
if (of_address_to_resource(np, 0, &r)) {
|
|
printk(KERN_ERR "Failed to map mpic register space\n");
|
|
of_node_put(np);
|
|
return;
|
|
}
|
|
|
|
mpic = mpic_alloc(np, r.start,
|
|
MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
|
|
0, 256, " OpenPIC ");
|
|
BUG_ON(mpic == NULL);
|
|
|
|
/* Return the mpic node */
|
|
of_node_put(np);
|
|
|
|
mpic_init(mpic);
|
|
}
|
|
|
|
#if defined(CONFIG_PPC_I8259) && defined(CONFIG_PCI)
|
|
static int mpc85xx_cds_8259_attach(void)
|
|
{
|
|
int ret;
|
|
struct device_node *np = NULL;
|
|
struct device_node *cascade_node = NULL;
|
|
int cascade_irq;
|
|
|
|
/* Initialize the i8259 controller */
|
|
for_each_node_by_type(np, "interrupt-controller")
|
|
if (of_device_is_compatible(np, "chrp,iic")) {
|
|
cascade_node = np;
|
|
break;
|
|
}
|
|
|
|
if (cascade_node == NULL) {
|
|
printk(KERN_DEBUG "Could not find i8259 PIC\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
cascade_irq = irq_of_parse_and_map(cascade_node, 0);
|
|
if (cascade_irq == NO_IRQ) {
|
|
printk(KERN_ERR "Failed to map cascade interrupt\n");
|
|
return -ENXIO;
|
|
}
|
|
|
|
i8259_init(cascade_node, 0);
|
|
of_node_put(cascade_node);
|
|
|
|
/*
|
|
* Hook the interrupt to make sure desc->action is never NULL.
|
|
* This is required to ensure that the interrupt does not get
|
|
* disabled when the last user of the shared IRQ line frees their
|
|
* interrupt.
|
|
*/
|
|
if ((ret = setup_irq(cascade_irq, &mpc85xxcds_8259_irqaction))) {
|
|
printk(KERN_ERR "Failed to setup cascade interrupt\n");
|
|
return ret;
|
|
}
|
|
|
|
/* Success. Connect our low-level cascade handler. */
|
|
set_irq_handler(cascade_irq, mpc85xx_8259_cascade_handler);
|
|
|
|
return 0;
|
|
}
|
|
machine_device_initcall(mpc85xx_cds, mpc85xx_cds_8259_attach);
|
|
|
|
#endif /* CONFIG_PPC_I8259 */
|
|
|
|
/*
|
|
* Setup the architecture
|
|
*/
|
|
static void __init mpc85xx_cds_setup_arch(void)
|
|
{
|
|
#ifdef CONFIG_PCI
|
|
struct device_node *np;
|
|
#endif
|
|
|
|
if (ppc_md.progress)
|
|
ppc_md.progress("mpc85xx_cds_setup_arch()", 0);
|
|
|
|
cadmus = ioremap(CADMUS_BASE, CADMUS_SIZE);
|
|
cds_pci_slot = ((cadmus[CM_CSR] >> 6) & 0x3) + 1;
|
|
|
|
if (ppc_md.progress) {
|
|
char buf[40];
|
|
snprintf(buf, 40, "CDS Version = 0x%x in slot %d\n",
|
|
cadmus[CM_VER], cds_pci_slot);
|
|
ppc_md.progress(buf, 0);
|
|
}
|
|
|
|
#ifdef CONFIG_PCI
|
|
for_each_node_by_type(np, "pci") {
|
|
if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
|
|
of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
|
|
struct resource rsrc;
|
|
of_address_to_resource(np, 0, &rsrc);
|
|
if ((rsrc.start & 0xfffff) == 0x8000)
|
|
fsl_add_bridge(np, 1);
|
|
else
|
|
fsl_add_bridge(np, 0);
|
|
}
|
|
}
|
|
|
|
ppc_md.pci_irq_fixup = mpc85xx_cds_pci_irq_fixup;
|
|
ppc_md.pci_exclude_device = mpc85xx_exclude_device;
|
|
#endif
|
|
}
|
|
|
|
static void mpc85xx_cds_show_cpuinfo(struct seq_file *m)
|
|
{
|
|
uint pvid, svid, phid1;
|
|
|
|
pvid = mfspr(SPRN_PVR);
|
|
svid = mfspr(SPRN_SVR);
|
|
|
|
seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n");
|
|
seq_printf(m, "Machine\t\t: MPC85xx CDS (0x%x)\n", cadmus[CM_VER]);
|
|
seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
|
|
seq_printf(m, "SVR\t\t: 0x%x\n", svid);
|
|
|
|
/* Display cpu Pll setting */
|
|
phid1 = mfspr(SPRN_HID1);
|
|
seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
|
|
}
|
|
|
|
|
|
/*
|
|
* Called very early, device-tree isn't unflattened
|
|
*/
|
|
static int __init mpc85xx_cds_probe(void)
|
|
{
|
|
unsigned long root = of_get_flat_dt_root();
|
|
|
|
return of_flat_dt_is_compatible(root, "MPC85xxCDS");
|
|
}
|
|
|
|
static struct of_device_id __initdata of_bus_ids[] = {
|
|
{ .type = "soc", },
|
|
{ .compatible = "soc", },
|
|
{ .compatible = "simple-bus", },
|
|
{ .compatible = "gianfar", },
|
|
{},
|
|
};
|
|
|
|
static int __init declare_of_platform_devices(void)
|
|
{
|
|
return of_platform_bus_probe(NULL, of_bus_ids, NULL);
|
|
}
|
|
machine_device_initcall(mpc85xx_cds, declare_of_platform_devices);
|
|
|
|
define_machine(mpc85xx_cds) {
|
|
.name = "MPC85xx CDS",
|
|
.probe = mpc85xx_cds_probe,
|
|
.setup_arch = mpc85xx_cds_setup_arch,
|
|
.init_IRQ = mpc85xx_cds_pic_init,
|
|
.show_cpuinfo = mpc85xx_cds_show_cpuinfo,
|
|
.get_irq = mpic_get_irq,
|
|
#ifdef CONFIG_PCI
|
|
.restart = mpc85xx_cds_restart,
|
|
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
|
|
#else
|
|
.restart = fsl_rstcr_restart,
|
|
#endif
|
|
.calibrate_decr = generic_calibrate_decr,
|
|
.progress = udbg_progress,
|
|
};
|