satip-axe/kernel/drivers/net/wireless/ath/ath5k/reg.h
2015-03-26 17:24:57 +01:00

2597 lines
95 KiB
C

/*
* Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
* Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
* Copyright (c) 2007-2008 Michael Taylor <mike.taylor@apprion.com>
*
* Permission to use, copy, modify, and distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
/*
* Register values for Atheros 5210/5211/5212 cards from OpenBSD's ar5k
* maintained by Reyk Floeter
*
* I tried to document those registers by looking at ar5k code, some
* 802.11 (802.11e mostly) papers and by reading various public available
* Atheros presentations and papers like these:
*
* 5210 - http://nova.stanford.edu/~bbaas/ps/isscc2002_slides.pdf
* http://www.it.iitb.ac.in/~janak/wifire/01222734.pdf
*
* 5211 - http://www.hotchips.org/archives/hc14/3_Tue/16_mcfarland.pdf
*
* This file also contains register values found on a memory dump of
* Atheros's ART program (Atheros Radio Test), on ath9k, on legacy-hal
* released by Atheros and on various debug messages found on the net.
*/
/*====MAC DMA REGISTERS====*/
/*
* AR5210-Specific TXDP registers
* 5210 has only 2 transmit queues so no DCU/QCU, just
* 2 transmit descriptor pointers...
*/
#define AR5K_NOQCU_TXDP0 0x0000 /* Queue 0 - data */
#define AR5K_NOQCU_TXDP1 0x0004 /* Queue 1 - beacons */
/*
* Mac Control Register
*/
#define AR5K_CR 0x0008 /* Register Address */
#define AR5K_CR_TXE0 0x00000001 /* TX Enable for queue 0 on 5210 */
#define AR5K_CR_TXE1 0x00000002 /* TX Enable for queue 1 on 5210 */
#define AR5K_CR_RXE 0x00000004 /* RX Enable */
#define AR5K_CR_TXD0 0x00000008 /* TX Disable for queue 0 on 5210 */
#define AR5K_CR_TXD1 0x00000010 /* TX Disable for queue 1 on 5210 */
#define AR5K_CR_RXD 0x00000020 /* RX Disable */
#define AR5K_CR_SWI 0x00000040 /* Software Interrupt */
/*
* RX Descriptor Pointer register
*/
#define AR5K_RXDP 0x000c
/*
* Configuration and status register
*/
#define AR5K_CFG 0x0014 /* Register Address */
#define AR5K_CFG_SWTD 0x00000001 /* Byte-swap TX descriptor (for big endian archs) */
#define AR5K_CFG_SWTB 0x00000002 /* Byte-swap TX buffer */
#define AR5K_CFG_SWRD 0x00000004 /* Byte-swap RX descriptor */
#define AR5K_CFG_SWRB 0x00000008 /* Byte-swap RX buffer */
#define AR5K_CFG_SWRG 0x00000010 /* Byte-swap Register access */
#define AR5K_CFG_IBSS 0x00000020 /* 0-BSS, 1-IBSS [5211+] */
#define AR5K_CFG_PHY_OK 0x00000100 /* [5211+] */
#define AR5K_CFG_EEBS 0x00000200 /* EEPROM is busy */
#define AR5K_CFG_CLKGD 0x00000400 /* Clock gated (Disable dynamic clock) */
#define AR5K_CFG_TXCNT 0x00007800 /* Tx frame count (?) [5210] */
#define AR5K_CFG_TXCNT_S 11
#define AR5K_CFG_TXFSTAT 0x00008000 /* Tx frame status (?) [5210] */
#define AR5K_CFG_TXFSTRT 0x00010000 /* [5210] */
#define AR5K_CFG_PCI_THRES 0x00060000 /* PCI Master req q threshold [5211+] */
#define AR5K_CFG_PCI_THRES_S 17
/*
* Interrupt enable register
*/
#define AR5K_IER 0x0024 /* Register Address */
#define AR5K_IER_DISABLE 0x00000000 /* Disable card interrupts */
#define AR5K_IER_ENABLE 0x00000001 /* Enable card interrupts */
/*
* 0x0028 is Beacon Control Register on 5210
* and first RTS duration register on 5211
*/
/*
* Beacon control register [5210]
*/
#define AR5K_BCR 0x0028 /* Register Address */
#define AR5K_BCR_AP 0x00000000 /* AP mode */
#define AR5K_BCR_ADHOC 0x00000001 /* Ad-Hoc mode */
#define AR5K_BCR_BDMAE 0x00000002 /* DMA enable */
#define AR5K_BCR_TQ1FV 0x00000004 /* Use Queue1 for CAB traffic */
#define AR5K_BCR_TQ1V 0x00000008 /* Use Queue1 for Beacon traffic */
#define AR5K_BCR_BCGET 0x00000010
/*
* First RTS duration register [5211]
*/
#define AR5K_RTSD0 0x0028 /* Register Address */
#define AR5K_RTSD0_6 0x000000ff /* 6Mb RTS duration mask (?) */
#define AR5K_RTSD0_6_S 0 /* 6Mb RTS duration shift (?) */
#define AR5K_RTSD0_9 0x0000ff00 /* 9Mb*/
#define AR5K_RTSD0_9_S 8
#define AR5K_RTSD0_12 0x00ff0000 /* 12Mb*/
#define AR5K_RTSD0_12_S 16
#define AR5K_RTSD0_18 0xff000000 /* 16Mb*/
#define AR5K_RTSD0_18_S 24
/*
* 0x002c is Beacon Status Register on 5210
* and second RTS duration register on 5211
*/
/*
* Beacon status register [5210]
*
* As i can see in ar5k_ar5210_tx_start Reyk uses some of the values of BCR
* for this register, so i guess TQ1V,TQ1FV and BDMAE have the same meaning
* here and SNP/SNAP means "snapshot" (so this register gets synced with BCR).
* So SNAPPEDBCRVALID sould also stand for "snapped BCR -values- valid", so i
* renamed it to SNAPSHOTSVALID to make more sense. I realy have no idea what
* else can it be. I also renamed SNPBCMD to SNPADHOC to match BCR.
*/
#define AR5K_BSR 0x002c /* Register Address */
#define AR5K_BSR_BDLYSW 0x00000001 /* SW Beacon delay (?) */
#define AR5K_BSR_BDLYDMA 0x00000002 /* DMA Beacon delay (?) */
#define AR5K_BSR_TXQ1F 0x00000004 /* Beacon queue (1) finished */
#define AR5K_BSR_ATIMDLY 0x00000008 /* ATIM delay (?) */
#define AR5K_BSR_SNPADHOC 0x00000100 /* Ad-hoc mode set (?) */
#define AR5K_BSR_SNPBDMAE 0x00000200 /* Beacon DMA enabled (?) */
#define AR5K_BSR_SNPTQ1FV 0x00000400 /* Queue1 is used for CAB traffic (?) */
#define AR5K_BSR_SNPTQ1V 0x00000800 /* Queue1 is used for Beacon traffic (?) */
#define AR5K_BSR_SNAPSHOTSVALID 0x00001000 /* BCR snapshots are valid (?) */
#define AR5K_BSR_SWBA_CNT 0x00ff0000
/*
* Second RTS duration register [5211]
*/
#define AR5K_RTSD1 0x002c /* Register Address */
#define AR5K_RTSD1_24 0x000000ff /* 24Mb */
#define AR5K_RTSD1_24_S 0
#define AR5K_RTSD1_36 0x0000ff00 /* 36Mb */
#define AR5K_RTSD1_36_S 8
#define AR5K_RTSD1_48 0x00ff0000 /* 48Mb */
#define AR5K_RTSD1_48_S 16
#define AR5K_RTSD1_54 0xff000000 /* 54Mb */
#define AR5K_RTSD1_54_S 24
/*
* Transmit configuration register
*/
#define AR5K_TXCFG 0x0030 /* Register Address */
#define AR5K_TXCFG_SDMAMR 0x00000007 /* DMA size (read) */
#define AR5K_TXCFG_SDMAMR_S 0
#define AR5K_TXCFG_B_MODE 0x00000008 /* Set b mode for 5111 (enable 2111) */
#define AR5K_TXCFG_TXFSTP 0x00000008 /* TX DMA full Stop [5210] */
#define AR5K_TXCFG_TXFULL 0x000003f0 /* TX Triger level mask */
#define AR5K_TXCFG_TXFULL_S 4
#define AR5K_TXCFG_TXFULL_0B 0x00000000
#define AR5K_TXCFG_TXFULL_64B 0x00000010
#define AR5K_TXCFG_TXFULL_128B 0x00000020
#define AR5K_TXCFG_TXFULL_192B 0x00000030
#define AR5K_TXCFG_TXFULL_256B 0x00000040
#define AR5K_TXCFG_TXCONT_EN 0x00000080
#define AR5K_TXCFG_DMASIZE 0x00000100 /* Flag for passing DMA size [5210] */
#define AR5K_TXCFG_JUMBO_DESC_EN 0x00000400 /* Enable jumbo tx descriptors [5211+] */
#define AR5K_TXCFG_ADHOC_BCN_ATIM 0x00000800 /* Adhoc Beacon ATIM Policy */
#define AR5K_TXCFG_ATIM_WINDOW_DEF_DIS 0x00001000 /* Disable ATIM window defer [5211+] */
#define AR5K_TXCFG_RTSRND 0x00001000 /* [5211+] */
#define AR5K_TXCFG_FRMPAD_DIS 0x00002000 /* [5211+] */
#define AR5K_TXCFG_RDY_CBR_DIS 0x00004000 /* Ready time CBR disable [5211+] */
#define AR5K_TXCFG_JUMBO_FRM_MODE 0x00008000 /* Jumbo frame mode [5211+] */
#define AR5K_TXCFG_DCU_DBL_BUF_DIS 0x00008000 /* Disable double buffering on DCU */
#define AR5K_TXCFG_DCU_CACHING_DIS 0x00010000 /* Disable DCU caching */
/*
* Receive configuration register
*/
#define AR5K_RXCFG 0x0034 /* Register Address */
#define AR5K_RXCFG_SDMAMW 0x00000007 /* DMA size (write) */
#define AR5K_RXCFG_SDMAMW_S 0
#define AR5K_RXCFG_ZLFDMA 0x00000008 /* Enable Zero-length frame DMA */
#define AR5K_RXCFG_DEF_ANTENNA 0x00000010 /* Default antenna (?) */
#define AR5K_RXCFG_JUMBO_RXE 0x00000020 /* Enable jumbo rx descriptors [5211+] */
#define AR5K_RXCFG_JUMBO_WRAP 0x00000040 /* Wrap jumbo frames [5211+] */
#define AR5K_RXCFG_SLE_ENTRY 0x00000080 /* Sleep entry policy */
/*
* Receive jumbo descriptor last address register
* Only found in 5211 (?)
*/
#define AR5K_RXJLA 0x0038
/*
* MIB control register
*/
#define AR5K_MIBC 0x0040 /* Register Address */
#define AR5K_MIBC_COW 0x00000001 /* Warn test indicator */
#define AR5K_MIBC_FMC 0x00000002 /* Freeze MIB Counters */
#define AR5K_MIBC_CMC 0x00000004 /* Clean MIB Counters */
#define AR5K_MIBC_MCS 0x00000008 /* MIB counter strobe */
/*
* Timeout prescale register
*/
#define AR5K_TOPS 0x0044
#define AR5K_TOPS_M 0x0000ffff
/*
* Receive timeout register (no frame received)
*/
#define AR5K_RXNOFRM 0x0048
#define AR5K_RXNOFRM_M 0x000003ff
/*
* Transmit timeout register (no frame sent)
*/
#define AR5K_TXNOFRM 0x004c
#define AR5K_TXNOFRM_M 0x000003ff
#define AR5K_TXNOFRM_QCU 0x000ffc00
#define AR5K_TXNOFRM_QCU_S 10
/*
* Receive frame gap timeout register
*/
#define AR5K_RPGTO 0x0050
#define AR5K_RPGTO_M 0x000003ff
/*
* Receive frame count limit register
*/
#define AR5K_RFCNT 0x0054
#define AR5K_RFCNT_M 0x0000001f /* [5211+] (?) */
#define AR5K_RFCNT_RFCL 0x0000000f /* [5210] */
/*
* Misc settings register
* (reserved0-3)
*/
#define AR5K_MISC 0x0058 /* Register Address */
#define AR5K_MISC_DMA_OBS_M 0x000001e0
#define AR5K_MISC_DMA_OBS_S 5
#define AR5K_MISC_MISC_OBS_M 0x00000e00
#define AR5K_MISC_MISC_OBS_S 9
#define AR5K_MISC_MAC_OBS_LSB_M 0x00007000
#define AR5K_MISC_MAC_OBS_LSB_S 12
#define AR5K_MISC_MAC_OBS_MSB_M 0x00038000
#define AR5K_MISC_MAC_OBS_MSB_S 15
#define AR5K_MISC_LED_DECAY 0x001c0000 /* [5210] */
#define AR5K_MISC_LED_BLINK 0x00e00000 /* [5210] */
/*
* QCU/DCU clock gating register (5311)
* (reserved4-5)
*/
#define AR5K_QCUDCU_CLKGT 0x005c /* Register Address (?) */
#define AR5K_QCUDCU_CLKGT_QCU 0x0000ffff /* Mask for QCU clock */
#define AR5K_QCUDCU_CLKGT_DCU 0x07ff0000 /* Mask for DCU clock */
/*
* Interrupt Status Registers
*
* For 5210 there is only one status register but for
* 5211/5212 we have one primary and 4 secondary registers.
* So we have AR5K_ISR for 5210 and AR5K_PISR /SISRx for 5211/5212.
* Most of these bits are common for all chipsets.
*/
#define AR5K_ISR 0x001c /* Register Address [5210] */
#define AR5K_PISR 0x0080 /* Register Address [5211+] */
#define AR5K_ISR_RXOK 0x00000001 /* Frame successfuly recieved */
#define AR5K_ISR_RXDESC 0x00000002 /* RX descriptor request */
#define AR5K_ISR_RXERR 0x00000004 /* Receive error */
#define AR5K_ISR_RXNOFRM 0x00000008 /* No frame received (receive timeout) */
#define AR5K_ISR_RXEOL 0x00000010 /* Empty RX descriptor */
#define AR5K_ISR_RXORN 0x00000020 /* Receive FIFO overrun */
#define AR5K_ISR_TXOK 0x00000040 /* Frame successfuly transmited */
#define AR5K_ISR_TXDESC 0x00000080 /* TX descriptor request */
#define AR5K_ISR_TXERR 0x00000100 /* Transmit error */
#define AR5K_ISR_TXNOFRM 0x00000200 /* No frame transmited (transmit timeout) */
#define AR5K_ISR_TXEOL 0x00000400 /* Empty TX descriptor */
#define AR5K_ISR_TXURN 0x00000800 /* Transmit FIFO underrun */
#define AR5K_ISR_MIB 0x00001000 /* Update MIB counters */
#define AR5K_ISR_SWI 0x00002000 /* Software interrupt */
#define AR5K_ISR_RXPHY 0x00004000 /* PHY error */
#define AR5K_ISR_RXKCM 0x00008000 /* RX Key cache miss */
#define AR5K_ISR_SWBA 0x00010000 /* Software beacon alert */
#define AR5K_ISR_BRSSI 0x00020000 /* Beacon rssi below threshold (?) */
#define AR5K_ISR_BMISS 0x00040000 /* Beacon missed */
#define AR5K_ISR_HIUERR 0x00080000 /* Host Interface Unit error [5211+] */
#define AR5K_ISR_BNR 0x00100000 /* Beacon not ready [5211+] */
#define AR5K_ISR_MCABT 0x00100000 /* Master Cycle Abort [5210] */
#define AR5K_ISR_RXCHIRP 0x00200000 /* CHIRP Received [5212+] */
#define AR5K_ISR_SSERR 0x00200000 /* Signaled System Error [5210] */
#define AR5K_ISR_DPERR 0x00400000 /* Det par Error (?) [5210] */
#define AR5K_ISR_RXDOPPLER 0x00400000 /* Doppler chirp received [5212+] */
#define AR5K_ISR_TIM 0x00800000 /* [5211+] */
#define AR5K_ISR_BCNMISC 0x00800000 /* 'or' of TIM, CAB_END, DTIM_SYNC, BCN_TIMEOUT,
CAB_TIMEOUT and DTIM bits from SISR2 [5212+] */
#define AR5K_ISR_GPIO 0x01000000 /* GPIO (rf kill) */
#define AR5K_ISR_QCBRORN 0x02000000 /* QCU CBR overrun [5211+] */
#define AR5K_ISR_QCBRURN 0x04000000 /* QCU CBR underrun [5211+] */
#define AR5K_ISR_QTRIG 0x08000000 /* QCU scheduling trigger [5211+] */
/*
* Secondary status registers [5211+] (0 - 4)
*
* These give the status for each QCU, only QCUs 0-9 are
* represented.
*/
#define AR5K_SISR0 0x0084 /* Register Address [5211+] */
#define AR5K_SISR0_QCU_TXOK 0x000003ff /* Mask for QCU_TXOK */
#define AR5K_SISR0_QCU_TXOK_S 0
#define AR5K_SISR0_QCU_TXDESC 0x03ff0000 /* Mask for QCU_TXDESC */
#define AR5K_SISR0_QCU_TXDESC_S 16
#define AR5K_SISR1 0x0088 /* Register Address [5211+] */
#define AR5K_SISR1_QCU_TXERR 0x000003ff /* Mask for QCU_TXERR */
#define AR5K_SISR1_QCU_TXERR_S 0
#define AR5K_SISR1_QCU_TXEOL 0x03ff0000 /* Mask for QCU_TXEOL */
#define AR5K_SISR1_QCU_TXEOL_S 16
#define AR5K_SISR2 0x008c /* Register Address [5211+] */
#define AR5K_SISR2_QCU_TXURN 0x000003ff /* Mask for QCU_TXURN */
#define AR5K_SISR2_QCU_TXURN_S 0
#define AR5K_SISR2_MCABT 0x00010000 /* Master Cycle Abort */
#define AR5K_SISR2_SSERR 0x00020000 /* Signaled System Error */
#define AR5K_SISR2_DPERR 0x00040000 /* Bus parity error */
#define AR5K_SISR2_TIM 0x01000000 /* [5212+] */
#define AR5K_SISR2_CAB_END 0x02000000 /* [5212+] */
#define AR5K_SISR2_DTIM_SYNC 0x04000000 /* DTIM sync lost [5212+] */
#define AR5K_SISR2_BCN_TIMEOUT 0x08000000 /* Beacon Timeout [5212+] */
#define AR5K_SISR2_CAB_TIMEOUT 0x10000000 /* CAB Timeout [5212+] */
#define AR5K_SISR2_DTIM 0x20000000 /* [5212+] */
#define AR5K_SISR2_TSFOOR 0x80000000 /* TSF OOR (?) */
#define AR5K_SISR3 0x0090 /* Register Address [5211+] */
#define AR5K_SISR3_QCBRORN 0x000003ff /* Mask for QCBRORN */
#define AR5K_SISR3_QCBRORN_S 0
#define AR5K_SISR3_QCBRURN 0x03ff0000 /* Mask for QCBRURN */
#define AR5K_SISR3_QCBRURN_S 16
#define AR5K_SISR4 0x0094 /* Register Address [5211+] */
#define AR5K_SISR4_QTRIG 0x000003ff /* Mask for QTRIG */
#define AR5K_SISR4_QTRIG_S 0
/*
* Shadow read-and-clear interrupt status registers [5211+]
*/
#define AR5K_RAC_PISR 0x00c0 /* Read and clear PISR */
#define AR5K_RAC_SISR0 0x00c4 /* Read and clear SISR0 */
#define AR5K_RAC_SISR1 0x00c8 /* Read and clear SISR1 */
#define AR5K_RAC_SISR2 0x00cc /* Read and clear SISR2 */
#define AR5K_RAC_SISR3 0x00d0 /* Read and clear SISR3 */
#define AR5K_RAC_SISR4 0x00d4 /* Read and clear SISR4 */
/*
* Interrupt Mask Registers
*
* As whith ISRs 5210 has one IMR (AR5K_IMR) and 5211/5212 has one primary
* (AR5K_PIMR) and 4 secondary IMRs (AR5K_SIMRx). Note that ISR/IMR flags match.
*/
#define AR5K_IMR 0x0020 /* Register Address [5210] */
#define AR5K_PIMR 0x00a0 /* Register Address [5211+] */
#define AR5K_IMR_RXOK 0x00000001 /* Frame successfuly recieved*/
#define AR5K_IMR_RXDESC 0x00000002 /* RX descriptor request*/
#define AR5K_IMR_RXERR 0x00000004 /* Receive error*/
#define AR5K_IMR_RXNOFRM 0x00000008 /* No frame received (receive timeout)*/
#define AR5K_IMR_RXEOL 0x00000010 /* Empty RX descriptor*/
#define AR5K_IMR_RXORN 0x00000020 /* Receive FIFO overrun*/
#define AR5K_IMR_TXOK 0x00000040 /* Frame successfuly transmited*/
#define AR5K_IMR_TXDESC 0x00000080 /* TX descriptor request*/
#define AR5K_IMR_TXERR 0x00000100 /* Transmit error*/
#define AR5K_IMR_TXNOFRM 0x00000200 /* No frame transmited (transmit timeout)*/
#define AR5K_IMR_TXEOL 0x00000400 /* Empty TX descriptor*/
#define AR5K_IMR_TXURN 0x00000800 /* Transmit FIFO underrun*/
#define AR5K_IMR_MIB 0x00001000 /* Update MIB counters*/
#define AR5K_IMR_SWI 0x00002000 /* Software interrupt */
#define AR5K_IMR_RXPHY 0x00004000 /* PHY error*/
#define AR5K_IMR_RXKCM 0x00008000 /* RX Key cache miss */
#define AR5K_IMR_SWBA 0x00010000 /* Software beacon alert*/
#define AR5K_IMR_BRSSI 0x00020000 /* Beacon rssi below threshold (?) */
#define AR5K_IMR_BMISS 0x00040000 /* Beacon missed*/
#define AR5K_IMR_HIUERR 0x00080000 /* Host Interface Unit error [5211+] */
#define AR5K_IMR_BNR 0x00100000 /* Beacon not ready [5211+] */
#define AR5K_IMR_MCABT 0x00100000 /* Master Cycle Abort [5210] */
#define AR5K_IMR_RXCHIRP 0x00200000 /* CHIRP Received [5212+]*/
#define AR5K_IMR_SSERR 0x00200000 /* Signaled System Error [5210] */
#define AR5K_IMR_DPERR 0x00400000 /* Det par Error (?) [5210] */
#define AR5K_IMR_RXDOPPLER 0x00400000 /* Doppler chirp received [5212+] */
#define AR5K_IMR_TIM 0x00800000 /* [5211+] */
#define AR5K_IMR_BCNMISC 0x00800000 /* 'or' of TIM, CAB_END, DTIM_SYNC, BCN_TIMEOUT,
CAB_TIMEOUT and DTIM bits from SISR2 [5212+] */
#define AR5K_IMR_GPIO 0x01000000 /* GPIO (rf kill)*/
#define AR5K_IMR_QCBRORN 0x02000000 /* QCU CBR overrun (?) [5211+] */
#define AR5K_IMR_QCBRURN 0x04000000 /* QCU CBR underrun (?) [5211+] */
#define AR5K_IMR_QTRIG 0x08000000 /* QCU scheduling trigger [5211+] */
/*
* Secondary interrupt mask registers [5211+] (0 - 4)
*/
#define AR5K_SIMR0 0x00a4 /* Register Address [5211+] */
#define AR5K_SIMR0_QCU_TXOK 0x000003ff /* Mask for QCU_TXOK */
#define AR5K_SIMR0_QCU_TXOK_S 0
#define AR5K_SIMR0_QCU_TXDESC 0x03ff0000 /* Mask for QCU_TXDESC */
#define AR5K_SIMR0_QCU_TXDESC_S 16
#define AR5K_SIMR1 0x00a8 /* Register Address [5211+] */
#define AR5K_SIMR1_QCU_TXERR 0x000003ff /* Mask for QCU_TXERR */
#define AR5K_SIMR1_QCU_TXERR_S 0
#define AR5K_SIMR1_QCU_TXEOL 0x03ff0000 /* Mask for QCU_TXEOL */
#define AR5K_SIMR1_QCU_TXEOL_S 16
#define AR5K_SIMR2 0x00ac /* Register Address [5211+] */
#define AR5K_SIMR2_QCU_TXURN 0x000003ff /* Mask for QCU_TXURN */
#define AR5K_SIMR2_QCU_TXURN_S 0
#define AR5K_SIMR2_MCABT 0x00010000 /* Master Cycle Abort */
#define AR5K_SIMR2_SSERR 0x00020000 /* Signaled System Error */
#define AR5K_SIMR2_DPERR 0x00040000 /* Bus parity error */
#define AR5K_SIMR2_TIM 0x01000000 /* [5212+] */
#define AR5K_SIMR2_CAB_END 0x02000000 /* [5212+] */
#define AR5K_SIMR2_DTIM_SYNC 0x04000000 /* DTIM Sync lost [5212+] */
#define AR5K_SIMR2_BCN_TIMEOUT 0x08000000 /* Beacon Timeout [5212+] */
#define AR5K_SIMR2_CAB_TIMEOUT 0x10000000 /* CAB Timeout [5212+] */
#define AR5K_SIMR2_DTIM 0x20000000 /* [5212+] */
#define AR5K_SIMR2_TSFOOR 0x80000000 /* TSF OOR (?) */
#define AR5K_SIMR3 0x00b0 /* Register Address [5211+] */
#define AR5K_SIMR3_QCBRORN 0x000003ff /* Mask for QCBRORN */
#define AR5K_SIMR3_QCBRORN_S 0
#define AR5K_SIMR3_QCBRURN 0x03ff0000 /* Mask for QCBRURN */
#define AR5K_SIMR3_QCBRURN_S 16
#define AR5K_SIMR4 0x00b4 /* Register Address [5211+] */
#define AR5K_SIMR4_QTRIG 0x000003ff /* Mask for QTRIG */
#define AR5K_SIMR4_QTRIG_S 0
/*
* DMA Debug registers 0-7
* 0xe0 - 0xfc
*/
/*
* Decompression mask registers [5212+]
*/
#define AR5K_DCM_ADDR 0x0400 /*Decompression mask address (index) */
#define AR5K_DCM_DATA 0x0404 /*Decompression mask data */
/*
* Wake On Wireless pattern control register [5212+]
*/
#define AR5K_WOW_PCFG 0x0410 /* Register Address */
#define AR5K_WOW_PCFG_PAT_MATCH_EN 0x00000001 /* Pattern match enable */
#define AR5K_WOW_PCFG_LONG_FRAME_POL 0x00000002 /* Long frame policy */
#define AR5K_WOW_PCFG_WOBMISS 0x00000004 /* Wake on bea(con) miss (?) */
#define AR5K_WOW_PCFG_PAT_0_EN 0x00000100 /* Enable pattern 0 */
#define AR5K_WOW_PCFG_PAT_1_EN 0x00000200 /* Enable pattern 1 */
#define AR5K_WOW_PCFG_PAT_2_EN 0x00000400 /* Enable pattern 2 */
#define AR5K_WOW_PCFG_PAT_3_EN 0x00000800 /* Enable pattern 3 */
#define AR5K_WOW_PCFG_PAT_4_EN 0x00001000 /* Enable pattern 4 */
#define AR5K_WOW_PCFG_PAT_5_EN 0x00002000 /* Enable pattern 5 */
/*
* Wake On Wireless pattern index register (?) [5212+]
*/
#define AR5K_WOW_PAT_IDX 0x0414
/*
* Wake On Wireless pattern data register [5212+]
*/
#define AR5K_WOW_PAT_DATA 0x0418 /* Register Address */
#define AR5K_WOW_PAT_DATA_0_3_V 0x00000001 /* Pattern 0, 3 value */
#define AR5K_WOW_PAT_DATA_1_4_V 0x00000100 /* Pattern 1, 4 value */
#define AR5K_WOW_PAT_DATA_2_5_V 0x00010000 /* Pattern 2, 5 value */
#define AR5K_WOW_PAT_DATA_0_3_M 0x01000000 /* Pattern 0, 3 mask */
#define AR5K_WOW_PAT_DATA_1_4_M 0x04000000 /* Pattern 1, 4 mask */
#define AR5K_WOW_PAT_DATA_2_5_M 0x10000000 /* Pattern 2, 5 mask */
/*
* Decompression configuration registers [5212+]
*/
#define AR5K_DCCFG 0x0420 /* Register Address */
#define AR5K_DCCFG_GLOBAL_EN 0x00000001 /* Enable decompression on all queues */
#define AR5K_DCCFG_BYPASS_EN 0x00000002 /* Bypass decompression */
#define AR5K_DCCFG_BCAST_EN 0x00000004 /* Enable decompression for bcast frames */
#define AR5K_DCCFG_MCAST_EN 0x00000008 /* Enable decompression for mcast frames */
/*
* Compression configuration registers [5212+]
*/
#define AR5K_CCFG 0x0600 /* Register Address */
#define AR5K_CCFG_WINDOW_SIZE 0x00000007 /* Compression window size */
#define AR5K_CCFG_CPC_EN 0x00000008 /* Enable performance counters */
#define AR5K_CCFG_CCU 0x0604 /* Register Address */
#define AR5K_CCFG_CCU_CUP_EN 0x00000001 /* CCU Catchup enable */
#define AR5K_CCFG_CCU_CREDIT 0x00000002 /* CCU Credit (field) */
#define AR5K_CCFG_CCU_CD_THRES 0x00000080 /* CCU Cyc(lic?) debt threshold (field) */
#define AR5K_CCFG_CCU_CUP_LCNT 0x00010000 /* CCU Catchup lit(?) count */
#define AR5K_CCFG_CCU_INIT 0x00100200 /* Initial value during reset */
/*
* Compression performance counter registers [5212+]
*/
#define AR5K_CPC0 0x0610 /* Compression performance counter 0 */
#define AR5K_CPC1 0x0614 /* Compression performance counter 1*/
#define AR5K_CPC2 0x0618 /* Compression performance counter 2 */
#define AR5K_CPC3 0x061c /* Compression performance counter 3 */
#define AR5K_CPCOVF 0x0620 /* Compression performance overflow */
/*
* Queue control unit (QCU) registers [5211+]
*
* Card has 12 TX Queues but i see that only 0-9 are used (?)
* both in binary HAL (see ah.h) and ar5k. Each queue has it's own
* TXDP at addresses 0x0800 - 0x082c, a CBR (Constant Bit Rate)
* configuration register (0x08c0 - 0x08ec), a ready time configuration
* register (0x0900 - 0x092c), a misc configuration register (0x09c0 -
* 0x09ec) and a status register (0x0a00 - 0x0a2c). We also have some
* global registers, QCU transmit enable/disable and "one shot arm (?)"
* set/clear, which contain status for all queues (we shift by 1 for each
* queue). To access these registers easily we define some macros here
* that are used inside HAL. For more infos check out *_tx_queue functs.
*/
/*
* Generic QCU Register access macros
*/
#define AR5K_QUEUE_REG(_r, _q) (((_q) << 2) + _r)
#define AR5K_QCU_GLOBAL_READ(_r, _q) (AR5K_REG_READ(_r) & (1 << _q))
#define AR5K_QCU_GLOBAL_WRITE(_r, _q) AR5K_REG_WRITE(_r, (1 << _q))
/*
* QCU Transmit descriptor pointer registers
*/
#define AR5K_QCU_TXDP_BASE 0x0800 /* Register Address - Queue0 TXDP */
#define AR5K_QUEUE_TXDP(_q) AR5K_QUEUE_REG(AR5K_QCU_TXDP_BASE, _q)
/*
* QCU Transmit enable register
*/
#define AR5K_QCU_TXE 0x0840
#define AR5K_ENABLE_QUEUE(_q) AR5K_QCU_GLOBAL_WRITE(AR5K_QCU_TXE, _q)
#define AR5K_QUEUE_ENABLED(_q) AR5K_QCU_GLOBAL_READ(AR5K_QCU_TXE, _q)
/*
* QCU Transmit disable register
*/
#define AR5K_QCU_TXD 0x0880
#define AR5K_DISABLE_QUEUE(_q) AR5K_QCU_GLOBAL_WRITE(AR5K_QCU_TXD, _q)
#define AR5K_QUEUE_DISABLED(_q) AR5K_QCU_GLOBAL_READ(AR5K_QCU_TXD, _q)
/*
* QCU Constant Bit Rate configuration registers
*/
#define AR5K_QCU_CBRCFG_BASE 0x08c0 /* Register Address - Queue0 CBRCFG */
#define AR5K_QCU_CBRCFG_INTVAL 0x00ffffff /* CBR Interval mask */
#define AR5K_QCU_CBRCFG_INTVAL_S 0
#define AR5K_QCU_CBRCFG_ORN_THRES 0xff000000 /* CBR overrun threshold mask */
#define AR5K_QCU_CBRCFG_ORN_THRES_S 24
#define AR5K_QUEUE_CBRCFG(_q) AR5K_QUEUE_REG(AR5K_QCU_CBRCFG_BASE, _q)
/*
* QCU Ready time configuration registers
*/
#define AR5K_QCU_RDYTIMECFG_BASE 0x0900 /* Register Address - Queue0 RDYTIMECFG */
#define AR5K_QCU_RDYTIMECFG_INTVAL 0x00ffffff /* Ready time interval mask */
#define AR5K_QCU_RDYTIMECFG_INTVAL_S 0
#define AR5K_QCU_RDYTIMECFG_ENABLE 0x01000000 /* Ready time enable mask */
#define AR5K_QUEUE_RDYTIMECFG(_q) AR5K_QUEUE_REG(AR5K_QCU_RDYTIMECFG_BASE, _q)
/*
* QCU one shot arm set registers
*/
#define AR5K_QCU_ONESHOTARM_SET 0x0940 /* Register Address -QCU "one shot arm set (?)" */
#define AR5K_QCU_ONESHOTARM_SET_M 0x0000ffff
/*
* QCU one shot arm clear registers
*/
#define AR5K_QCU_ONESHOTARM_CLEAR 0x0980 /* Register Address -QCU "one shot arm clear (?)" */
#define AR5K_QCU_ONESHOTARM_CLEAR_M 0x0000ffff
/*
* QCU misc registers
*/
#define AR5K_QCU_MISC_BASE 0x09c0 /* Register Address -Queue0 MISC */
#define AR5K_QCU_MISC_FRSHED_M 0x0000000f /* Frame sheduling mask */
#define AR5K_QCU_MISC_FRSHED_ASAP 0 /* ASAP */
#define AR5K_QCU_MISC_FRSHED_CBR 1 /* Constant Bit Rate */
#define AR5K_QCU_MISC_FRSHED_DBA_GT 2 /* DMA Beacon alert gated */
#define AR5K_QCU_MISC_FRSHED_TIM_GT 3 /* TIMT gated */
#define AR5K_QCU_MISC_FRSHED_BCN_SENT_GT 4 /* Beacon sent gated */
#define AR5K_QCU_MISC_ONESHOT_ENABLE 0x00000010 /* Oneshot enable */
#define AR5K_QCU_MISC_CBREXP_DIS 0x00000020 /* Disable CBR expired counter (normal queue) */
#define AR5K_QCU_MISC_CBREXP_BCN_DIS 0x00000040 /* Disable CBR expired counter (beacon queue) */
#define AR5K_QCU_MISC_BCN_ENABLE 0x00000080 /* Enable Beacon use */
#define AR5K_QCU_MISC_CBR_THRES_ENABLE 0x00000100 /* CBR expired threshold enabled */
#define AR5K_QCU_MISC_RDY_VEOL_POLICY 0x00000200 /* TXE reset when RDYTIME expired or VEOL */
#define AR5K_QCU_MISC_CBR_RESET_CNT 0x00000400 /* CBR threshold (counter) reset */
#define AR5K_QCU_MISC_DCU_EARLY 0x00000800 /* DCU early termination */
#define AR5K_QCU_MISC_DCU_CMP_EN 0x00001000 /* Enable frame compression */
#define AR5K_QUEUE_MISC(_q) AR5K_QUEUE_REG(AR5K_QCU_MISC_BASE, _q)
/*
* QCU status registers
*/
#define AR5K_QCU_STS_BASE 0x0a00 /* Register Address - Queue0 STS */
#define AR5K_QCU_STS_FRMPENDCNT 0x00000003 /* Frames pending counter */
#define AR5K_QCU_STS_CBREXPCNT 0x0000ff00 /* CBR expired counter */
#define AR5K_QUEUE_STATUS(_q) AR5K_QUEUE_REG(AR5K_QCU_STS_BASE, _q)
/*
* QCU ready time shutdown register
*/
#define AR5K_QCU_RDYTIMESHDN 0x0a40
#define AR5K_QCU_RDYTIMESHDN_M 0x000003ff
/*
* QCU compression buffer base registers [5212+]
*/
#define AR5K_QCU_CBB_SELECT 0x0b00
#define AR5K_QCU_CBB_ADDR 0x0b04
#define AR5K_QCU_CBB_ADDR_S 9
/*
* QCU compression buffer configuration register [5212+]
* (buffer size)
*/
#define AR5K_QCU_CBCFG 0x0b08
/*
* Distributed Coordination Function (DCF) control unit (DCU)
* registers [5211+]
*
* These registers control the various characteristics of each queue
* for 802.11e (WME) combatibility so they go together with
* QCU registers in pairs. For each queue we have a QCU mask register,
* (0x1000 - 0x102c), a local-IFS settings register (0x1040 - 0x106c),
* a retry limit register (0x1080 - 0x10ac), a channel time register
* (0x10c0 - 0x10ec), a misc-settings register (0x1100 - 0x112c) and
* a sequence number register (0x1140 - 0x116c). It seems that "global"
* registers here afect all queues (see use of DCU_GBL_IFS_SLOT in ar5k).
* We use the same macros here for easier register access.
*
*/
/*
* DCU QCU mask registers
*/
#define AR5K_DCU_QCUMASK_BASE 0x1000 /* Register Address -Queue0 DCU_QCUMASK */
#define AR5K_DCU_QCUMASK_M 0x000003ff
#define AR5K_QUEUE_QCUMASK(_q) AR5K_QUEUE_REG(AR5K_DCU_QCUMASK_BASE, _q)
/*
* DCU local Inter Frame Space settings register
*/
#define AR5K_DCU_LCL_IFS_BASE 0x1040 /* Register Address -Queue0 DCU_LCL_IFS */
#define AR5K_DCU_LCL_IFS_CW_MIN 0x000003ff /* Minimum Contention Window */
#define AR5K_DCU_LCL_IFS_CW_MIN_S 0
#define AR5K_DCU_LCL_IFS_CW_MAX 0x000ffc00 /* Maximum Contention Window */
#define AR5K_DCU_LCL_IFS_CW_MAX_S 10
#define AR5K_DCU_LCL_IFS_AIFS 0x0ff00000 /* Arbitrated Interframe Space */
#define AR5K_DCU_LCL_IFS_AIFS_S 20
#define AR5K_DCU_LCL_IFS_AIFS_MAX 0xfc /* Anything above that can cause DCU to hang */
#define AR5K_QUEUE_DFS_LOCAL_IFS(_q) AR5K_QUEUE_REG(AR5K_DCU_LCL_IFS_BASE, _q)
/*
* DCU retry limit registers
*/
#define AR5K_DCU_RETRY_LMT_BASE 0x1080 /* Register Address -Queue0 DCU_RETRY_LMT */
#define AR5K_DCU_RETRY_LMT_SH_RETRY 0x0000000f /* Short retry limit mask */
#define AR5K_DCU_RETRY_LMT_SH_RETRY_S 0
#define AR5K_DCU_RETRY_LMT_LG_RETRY 0x000000f0 /* Long retry limit mask */
#define AR5K_DCU_RETRY_LMT_LG_RETRY_S 4
#define AR5K_DCU_RETRY_LMT_SSH_RETRY 0x00003f00 /* Station short retry limit mask (?) */
#define AR5K_DCU_RETRY_LMT_SSH_RETRY_S 8
#define AR5K_DCU_RETRY_LMT_SLG_RETRY 0x000fc000 /* Station long retry limit mask (?) */
#define AR5K_DCU_RETRY_LMT_SLG_RETRY_S 14
#define AR5K_QUEUE_DFS_RETRY_LIMIT(_q) AR5K_QUEUE_REG(AR5K_DCU_RETRY_LMT_BASE, _q)
/*
* DCU channel time registers
*/
#define AR5K_DCU_CHAN_TIME_BASE 0x10c0 /* Register Address -Queue0 DCU_CHAN_TIME */
#define AR5K_DCU_CHAN_TIME_DUR 0x000fffff /* Channel time duration */
#define AR5K_DCU_CHAN_TIME_DUR_S 0
#define AR5K_DCU_CHAN_TIME_ENABLE 0x00100000 /* Enable channel time */
#define AR5K_QUEUE_DFS_CHANNEL_TIME(_q) AR5K_QUEUE_REG(AR5K_DCU_CHAN_TIME_BASE, _q)
/*
* DCU misc registers [5211+]
*
* Note: Arbiter lockout control controls the
* behaviour on low priority queues when we have multiple queues
* with pending frames. Intra-frame lockout means we wait until
* the queue's current frame transmits (with post frame backoff and bursting)
* before we transmit anything else and global lockout means we
* wait for the whole queue to finish before higher priority queues
* can transmit (this is used on beacon and CAB queues).
* No lockout means there is no special handling.
*/
#define AR5K_DCU_MISC_BASE 0x1100 /* Register Address -Queue0 DCU_MISC */
#define AR5K_DCU_MISC_BACKOFF 0x0000003f /* Mask for backoff threshold */
#define AR5K_DCU_MISC_ETS_RTS_POL 0x00000040 /* End of transmission series
station RTS/data failure count
reset policy (?) */
#define AR5K_DCU_MISC_ETS_CW_POL 0x00000080 /* End of transmission series
CW reset policy */
#define AR5K_DCU_MISC_FRAG_WAIT 0x00000100 /* Wait for next fragment */
#define AR5K_DCU_MISC_BACKOFF_FRAG 0x00000200 /* Enable backoff while bursting */
#define AR5K_DCU_MISC_HCFPOLL_ENABLE 0x00000800 /* CF - Poll enable */
#define AR5K_DCU_MISC_BACKOFF_PERSIST 0x00001000 /* Persistent backoff */
#define AR5K_DCU_MISC_FRMPRFTCH_ENABLE 0x00002000 /* Enable frame pre-fetch */
#define AR5K_DCU_MISC_VIRTCOL 0x0000c000 /* Mask for Virtual Collision (?) */
#define AR5K_DCU_MISC_VIRTCOL_NORMAL 0
#define AR5K_DCU_MISC_VIRTCOL_IGNORE 1
#define AR5K_DCU_MISC_BCN_ENABLE 0x00010000 /* Enable Beacon use */
#define AR5K_DCU_MISC_ARBLOCK_CTL 0x00060000 /* Arbiter lockout control mask */
#define AR5K_DCU_MISC_ARBLOCK_CTL_S 17
#define AR5K_DCU_MISC_ARBLOCK_CTL_NONE 0 /* No arbiter lockout */
#define AR5K_DCU_MISC_ARBLOCK_CTL_INTFRM 1 /* Intra-frame lockout */
#define AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL 2 /* Global lockout */
#define AR5K_DCU_MISC_ARBLOCK_IGNORE 0x00080000 /* Ignore Arbiter lockout */
#define AR5K_DCU_MISC_SEQ_NUM_INCR_DIS 0x00100000 /* Disable sequence number increment */
#define AR5K_DCU_MISC_POST_FR_BKOFF_DIS 0x00200000 /* Disable post-frame backoff */
#define AR5K_DCU_MISC_VIRT_COLL_POLICY 0x00400000 /* Virtual Collision cw policy */
#define AR5K_DCU_MISC_BLOWN_IFS_POLICY 0x00800000 /* Blown IFS policy (?) */
#define AR5K_DCU_MISC_SEQNUM_CTL 0x01000000 /* Sequence number control (?) */
#define AR5K_QUEUE_DFS_MISC(_q) AR5K_QUEUE_REG(AR5K_DCU_MISC_BASE, _q)
/*
* DCU frame sequence number registers
*/
#define AR5K_DCU_SEQNUM_BASE 0x1140
#define AR5K_DCU_SEQNUM_M 0x00000fff
#define AR5K_QUEUE_DCU_SEQNUM(_q) AR5K_QUEUE_REG(AR5K_DCU_SEQNUM_BASE, _q)
/*
* DCU global IFS SIFS register
*/
#define AR5K_DCU_GBL_IFS_SIFS 0x1030
#define AR5K_DCU_GBL_IFS_SIFS_M 0x0000ffff
/*
* DCU global IFS slot interval register
*/
#define AR5K_DCU_GBL_IFS_SLOT 0x1070
#define AR5K_DCU_GBL_IFS_SLOT_M 0x0000ffff
/*
* DCU global IFS EIFS register
*/
#define AR5K_DCU_GBL_IFS_EIFS 0x10b0
#define AR5K_DCU_GBL_IFS_EIFS_M 0x0000ffff
/*
* DCU global IFS misc register
*
* LFSR stands for Linear Feedback Shift Register
* and it's used for generating pseudo-random
* number sequences.
*
* (If i understand corectly, random numbers are
* used for idle sensing -multiplied with cwmin/max etc-)
*/
#define AR5K_DCU_GBL_IFS_MISC 0x10f0 /* Register Address */
#define AR5K_DCU_GBL_IFS_MISC_LFSR_SLICE 0x00000007 /* LFSR Slice Select */
#define AR5K_DCU_GBL_IFS_MISC_TURBO_MODE 0x00000008 /* Turbo mode */
#define AR5K_DCU_GBL_IFS_MISC_SIFS_DUR_USEC 0x000003f0 /* SIFS Duration mask */
#define AR5K_DCU_GBL_IFS_MISC_USEC_DUR 0x000ffc00 /* USEC Duration mask */
#define AR5K_DCU_GBL_IFS_MISC_USEC_DUR_S 10
#define AR5K_DCU_GBL_IFS_MISC_DCU_ARB_DELAY 0x00300000 /* DCU Arbiter delay mask */
#define AR5K_DCU_GBL_IFS_MISC_SIFS_CNT_RST 0x00400000 /* SIFS cnt reset policy (?) */
#define AR5K_DCU_GBL_IFS_MISC_AIFS_CNT_RST 0x00800000 /* AIFS cnt reset policy (?) */
#define AR5K_DCU_GBL_IFS_MISC_RND_LFSR_SL_DIS 0x01000000 /* Disable random LFSR slice */
/*
* DCU frame prefetch control register
*/
#define AR5K_DCU_FP 0x1230 /* Register Address */
#define AR5K_DCU_FP_NOBURST_DCU_EN 0x00000001 /* Enable non-burst prefetch on DCU (?) */
#define AR5K_DCU_FP_NOBURST_EN 0x00000010 /* Enable non-burst prefetch (?) */
#define AR5K_DCU_FP_BURST_DCU_EN 0x00000020 /* Enable burst prefetch on DCU (?) */
/*
* DCU transmit pause control/status register
*/
#define AR5K_DCU_TXP 0x1270 /* Register Address */
#define AR5K_DCU_TXP_M 0x000003ff /* Tx pause mask */
#define AR5K_DCU_TXP_STATUS 0x00010000 /* Tx pause status */
/*
* DCU transmit filter table 0 (32 entries)
* each entry contains a 32bit slice of the
* 128bit tx filter for each DCU (4 slices per DCU)
*/
#define AR5K_DCU_TX_FILTER_0_BASE 0x1038
#define AR5K_DCU_TX_FILTER_0(_n) (AR5K_DCU_TX_FILTER_0_BASE + (_n * 64))
/*
* DCU transmit filter table 1 (16 entries)
*/
#define AR5K_DCU_TX_FILTER_1_BASE 0x103c
#define AR5K_DCU_TX_FILTER_1(_n) (AR5K_DCU_TX_FILTER_1_BASE + (_n * 64))
/*
* DCU clear transmit filter register
*/
#define AR5K_DCU_TX_FILTER_CLR 0x143c
/*
* DCU set transmit filter register
*/
#define AR5K_DCU_TX_FILTER_SET 0x147c
/*
* Reset control register
*/
#define AR5K_RESET_CTL 0x4000 /* Register Address */
#define AR5K_RESET_CTL_PCU 0x00000001 /* Protocol Control Unit reset */
#define AR5K_RESET_CTL_DMA 0x00000002 /* DMA (Rx/Tx) reset [5210] */
#define AR5K_RESET_CTL_BASEBAND 0x00000002 /* Baseband reset [5211+] */
#define AR5K_RESET_CTL_MAC 0x00000004 /* MAC reset (PCU+Baseband ?) [5210] */
#define AR5K_RESET_CTL_PHY 0x00000008 /* PHY reset [5210] */
#define AR5K_RESET_CTL_PCI 0x00000010 /* PCI Core reset (interrupts etc) */
/*
* Sleep control register
*/
#define AR5K_SLEEP_CTL 0x4004 /* Register Address */
#define AR5K_SLEEP_CTL_SLDUR 0x0000ffff /* Sleep duration mask */
#define AR5K_SLEEP_CTL_SLDUR_S 0
#define AR5K_SLEEP_CTL_SLE 0x00030000 /* Sleep enable mask */
#define AR5K_SLEEP_CTL_SLE_S 16
#define AR5K_SLEEP_CTL_SLE_WAKE 0x00000000 /* Force chip awake */
#define AR5K_SLEEP_CTL_SLE_SLP 0x00010000 /* Force chip sleep */
#define AR5K_SLEEP_CTL_SLE_ALLOW 0x00020000 /* Normal sleep policy */
#define AR5K_SLEEP_CTL_SLE_UNITS 0x00000008 /* [5211+] */
#define AR5K_SLEEP_CTL_DUR_TIM_POL 0x00040000 /* Sleep duration timing policy */
#define AR5K_SLEEP_CTL_DUR_WRITE_POL 0x00080000 /* Sleep duration write policy */
#define AR5K_SLEEP_CTL_SLE_POL 0x00100000 /* Sleep policy mode */
/*
* Interrupt pending register
*/
#define AR5K_INTPEND 0x4008
#define AR5K_INTPEND_M 0x00000001
/*
* Sleep force register
*/
#define AR5K_SFR 0x400c
#define AR5K_SFR_EN 0x00000001
/*
* PCI configuration register
* TODO: Fix LED stuff
*/
#define AR5K_PCICFG 0x4010 /* Register Address */
#define AR5K_PCICFG_EEAE 0x00000001 /* Eeprom access enable [5210] */
#define AR5K_PCICFG_SLEEP_CLOCK_EN 0x00000002 /* Enable sleep clock */
#define AR5K_PCICFG_CLKRUNEN 0x00000004 /* CLKRUN enable [5211+] */
#define AR5K_PCICFG_EESIZE 0x00000018 /* Mask for EEPROM size [5211+] */
#define AR5K_PCICFG_EESIZE_S 3
#define AR5K_PCICFG_EESIZE_4K 0 /* 4K */
#define AR5K_PCICFG_EESIZE_8K 1 /* 8K */
#define AR5K_PCICFG_EESIZE_16K 2 /* 16K */
#define AR5K_PCICFG_EESIZE_FAIL 3 /* Failed to get size [5211+] */
#define AR5K_PCICFG_LED 0x00000060 /* Led status [5211+] */
#define AR5K_PCICFG_LED_NONE 0x00000000 /* Default [5211+] */
#define AR5K_PCICFG_LED_PEND 0x00000020 /* Scan / Auth pending */
#define AR5K_PCICFG_LED_ASSOC 0x00000040 /* Associated */
#define AR5K_PCICFG_BUS_SEL 0x00000380 /* Mask for "bus select" [5211+] (?) */
#define AR5K_PCICFG_CBEFIX_DIS 0x00000400 /* Disable CBE fix */
#define AR5K_PCICFG_SL_INTEN 0x00000800 /* Enable interrupts when asleep */
#define AR5K_PCICFG_LED_BCTL 0x00001000 /* Led blink (?) [5210] */
#define AR5K_PCICFG_RETRY_FIX 0x00001000 /* Enable pci core retry fix */
#define AR5K_PCICFG_SL_INPEN 0x00002000 /* Sleep even whith pending interrupts*/
#define AR5K_PCICFG_SPWR_DN 0x00010000 /* Mask for power status */
#define AR5K_PCICFG_LEDMODE 0x000e0000 /* Ledmode [5211+] */
#define AR5K_PCICFG_LEDMODE_PROP 0x00000000 /* Blink on standard traffic [5211+] */
#define AR5K_PCICFG_LEDMODE_PROM 0x00020000 /* Default mode (blink on any traffic) [5211+] */
#define AR5K_PCICFG_LEDMODE_PWR 0x00040000 /* Some other blinking mode (?) [5211+] */
#define AR5K_PCICFG_LEDMODE_RAND 0x00060000 /* Random blinking (?) [5211+] */
#define AR5K_PCICFG_LEDBLINK 0x00700000 /* Led blink rate */
#define AR5K_PCICFG_LEDBLINK_S 20
#define AR5K_PCICFG_LEDSLOW 0x00800000 /* Slowest led blink rate [5211+] */
#define AR5K_PCICFG_LEDSTATE \
(AR5K_PCICFG_LED | AR5K_PCICFG_LEDMODE | \
AR5K_PCICFG_LEDBLINK | AR5K_PCICFG_LEDSLOW)
#define AR5K_PCICFG_SLEEP_CLOCK_RATE 0x03000000 /* Sleep clock rate */
#define AR5K_PCICFG_SLEEP_CLOCK_RATE_S 24
/*
* "General Purpose Input/Output" (GPIO) control register
*
* I'm not sure about this but after looking at the code
* for all chipsets here is what i got.
*
* We have 6 GPIOs (pins), each GPIO has 4 modes (2 bits)
* Mode 0 -> always input
* Mode 1 -> output when GPIODO for this GPIO is set to 0
* Mode 2 -> output when GPIODO for this GPIO is set to 1
* Mode 3 -> always output
*
* For more infos check out get_gpio/set_gpio and
* set_gpio_input/set_gpio_output functs.
* For more infos on gpio interrupt check out set_gpio_intr.
*/
#define AR5K_NUM_GPIO 6
#define AR5K_GPIOCR 0x4014 /* Register Address */
#define AR5K_GPIOCR_INT_ENA 0x00008000 /* Enable GPIO interrupt */
#define AR5K_GPIOCR_INT_SELL 0x00000000 /* Generate interrupt when pin is low */
#define AR5K_GPIOCR_INT_SELH 0x00010000 /* Generate interrupt when pin is high */
#define AR5K_GPIOCR_IN(n) (0 << ((n) * 2)) /* Mode 0 for pin n */
#define AR5K_GPIOCR_OUT0(n) (1 << ((n) * 2)) /* Mode 1 for pin n */
#define AR5K_GPIOCR_OUT1(n) (2 << ((n) * 2)) /* Mode 2 for pin n */
#define AR5K_GPIOCR_OUT(n) (3 << ((n) * 2)) /* Mode 3 for pin n */
#define AR5K_GPIOCR_INT_SEL(n) ((n) << 12) /* Interrupt for GPIO pin n */
/*
* "General Purpose Input/Output" (GPIO) data output register
*/
#define AR5K_GPIODO 0x4018
/*
* "General Purpose Input/Output" (GPIO) data input register
*/
#define AR5K_GPIODI 0x401c
#define AR5K_GPIODI_M 0x0000002f
/*
* Silicon revision register
*/
#define AR5K_SREV 0x4020 /* Register Address */
#define AR5K_SREV_REV 0x0000000f /* Mask for revision */
#define AR5K_SREV_REV_S 0
#define AR5K_SREV_VER 0x000000ff /* Mask for version */
#define AR5K_SREV_VER_S 4
/*
* TXE write posting register
*/
#define AR5K_TXEPOST 0x4028
/*
* QCU sleep mask
*/
#define AR5K_QCU_SLEEP_MASK 0x402c
/* 0x4068 is compression buffer configuration
* register on 5414 and pm configuration register
* on 5424 and newer pci-e chips. */
/*
* Compression buffer configuration
* register (enable/disable) [5414]
*/
#define AR5K_5414_CBCFG 0x4068
#define AR5K_5414_CBCFG_BUF_DIS 0x10 /* Disable buffer */
/*
* PCI-E Power management configuration
* and status register [5424+]
*/
#define AR5K_PCIE_PM_CTL 0x4068 /* Register address */
/* Only 5424 */
#define AR5K_PCIE_PM_CTL_L1_WHEN_D2 0x00000001 /* enable PCIe core enter L1
when d2_sleep_en is asserted */
#define AR5K_PCIE_PM_CTL_L0_L0S_CLEAR 0x00000002 /* Clear L0 and L0S counters */
#define AR5K_PCIE_PM_CTL_L0_L0S_EN 0x00000004 /* Start L0 nd L0S counters */
#define AR5K_PCIE_PM_CTL_LDRESET_EN 0x00000008 /* Enable reset when link goes
down */
/* Wake On Wireless */
#define AR5K_PCIE_PM_CTL_PME_EN 0x00000010 /* PME Enable */
#define AR5K_PCIE_PM_CTL_AUX_PWR_DET 0x00000020 /* Aux power detect */
#define AR5K_PCIE_PM_CTL_PME_CLEAR 0x00000040 /* Clear PME */
#define AR5K_PCIE_PM_CTL_PSM_D0 0x00000080
#define AR5K_PCIE_PM_CTL_PSM_D1 0x00000100
#define AR5K_PCIE_PM_CTL_PSM_D2 0x00000200
#define AR5K_PCIE_PM_CTL_PSM_D3 0x00000400
/*
* PCI-E Workaround enable register
*/
#define AR5K_PCIE_WAEN 0x407c
/*
* PCI-E Serializer/Desirializer
* registers
*/
#define AR5K_PCIE_SERDES 0x4080
#define AR5K_PCIE_SERDES_RESET 0x4084
/*====EEPROM REGISTERS====*/
/*
* EEPROM access registers
*
* Here we got a difference between 5210/5211-12
* read data register for 5210 is at 0x6800 and
* status register is at 0x6c00. There is also
* no eeprom command register on 5210 and the
* offsets are different.
*
* To read eeprom data for a specific offset:
* 5210 - enable eeprom access (AR5K_PCICFG_EEAE)
* read AR5K_EEPROM_BASE +(4 * offset)
* check the eeprom status register
* and read eeprom data register.
*
* 5211 - write offset to AR5K_EEPROM_BASE
* 5212 write AR5K_EEPROM_CMD_READ on AR5K_EEPROM_CMD
* check the eeprom status register
* and read eeprom data register.
*
* To write eeprom data for a specific offset:
* 5210 - enable eeprom access (AR5K_PCICFG_EEAE)
* write data to AR5K_EEPROM_BASE +(4 * offset)
* check the eeprom status register
* 5211 - write AR5K_EEPROM_CMD_RESET on AR5K_EEPROM_CMD
* 5212 write offset to AR5K_EEPROM_BASE
* write data to data register
* write AR5K_EEPROM_CMD_WRITE on AR5K_EEPROM_CMD
* check the eeprom status register
*
* For more infos check eeprom_* functs and the ar5k.c
* file posted in madwifi-devel mailing list.
* http://sourceforge.net/mailarchive/message.php?msg_id=8966525
*
*/
#define AR5K_EEPROM_BASE 0x6000
/*
* EEPROM data register
*/
#define AR5K_EEPROM_DATA_5211 0x6004
#define AR5K_EEPROM_DATA_5210 0x6800
#define AR5K_EEPROM_DATA (ah->ah_version == AR5K_AR5210 ? \
AR5K_EEPROM_DATA_5210 : AR5K_EEPROM_DATA_5211)
/*
* EEPROM command register
*/
#define AR5K_EEPROM_CMD 0x6008 /* Register Addres */
#define AR5K_EEPROM_CMD_READ 0x00000001 /* EEPROM read */
#define AR5K_EEPROM_CMD_WRITE 0x00000002 /* EEPROM write */
#define AR5K_EEPROM_CMD_RESET 0x00000004 /* EEPROM reset */
/*
* EEPROM status register
*/
#define AR5K_EEPROM_STAT_5210 0x6c00 /* Register Address [5210] */
#define AR5K_EEPROM_STAT_5211 0x600c /* Register Address [5211+] */
#define AR5K_EEPROM_STATUS (ah->ah_version == AR5K_AR5210 ? \
AR5K_EEPROM_STAT_5210 : AR5K_EEPROM_STAT_5211)
#define AR5K_EEPROM_STAT_RDERR 0x00000001 /* EEPROM read failed */
#define AR5K_EEPROM_STAT_RDDONE 0x00000002 /* EEPROM read successful */
#define AR5K_EEPROM_STAT_WRERR 0x00000004 /* EEPROM write failed */
#define AR5K_EEPROM_STAT_WRDONE 0x00000008 /* EEPROM write successful */
/*
* EEPROM config register
*/
#define AR5K_EEPROM_CFG 0x6010 /* Register Addres */
#define AR5K_EEPROM_CFG_SIZE 0x00000003 /* Size determination override */
#define AR5K_EEPROM_CFG_SIZE_AUTO 0
#define AR5K_EEPROM_CFG_SIZE_4KBIT 1
#define AR5K_EEPROM_CFG_SIZE_8KBIT 2
#define AR5K_EEPROM_CFG_SIZE_16KBIT 3
#define AR5K_EEPROM_CFG_WR_WAIT_DIS 0x00000004 /* Disable write wait */
#define AR5K_EEPROM_CFG_CLK_RATE 0x00000018 /* Clock rate */
#define AR5K_EEPROM_CFG_CLK_RATE_S 3
#define AR5K_EEPROM_CFG_CLK_RATE_156KHZ 0
#define AR5K_EEPROM_CFG_CLK_RATE_312KHZ 1
#define AR5K_EEPROM_CFG_CLK_RATE_625KHZ 2
#define AR5K_EEPROM_CFG_PROT_KEY 0x00ffff00 /* Protection key */
#define AR5K_EEPROM_CFG_PROT_KEY_S 8
#define AR5K_EEPROM_CFG_LIND_EN 0x01000000 /* Enable length indicator (?) */
/*
* TODO: Wake On Wireless registers
* Range 0x7000 - 0x7ce0
*/
/*
* Protocol Control Unit (PCU) registers
*/
/*
* Used for checking initial register writes
* during channel reset (see reset func)
*/
#define AR5K_PCU_MIN 0x8000
#define AR5K_PCU_MAX 0x8fff
/*
* First station id register (Lower 32 bits of MAC address)
*/
#define AR5K_STA_ID0 0x8000
#define AR5K_STA_ID0_ARRD_L32 0xffffffff
/*
* Second station id register (Upper 16 bits of MAC address + PCU settings)
*/
#define AR5K_STA_ID1 0x8004 /* Register Address */
#define AR5K_STA_ID1_ADDR_U16 0x0000ffff /* Upper 16 bits of MAC addres */
#define AR5K_STA_ID1_AP 0x00010000 /* Set AP mode */
#define AR5K_STA_ID1_ADHOC 0x00020000 /* Set Ad-Hoc mode */
#define AR5K_STA_ID1_PWR_SV 0x00040000 /* Power save reporting */
#define AR5K_STA_ID1_NO_KEYSRCH 0x00080000 /* No key search */
#define AR5K_STA_ID1_NO_PSPOLL 0x00100000 /* No power save polling [5210] */
#define AR5K_STA_ID1_PCF_5211 0x00100000 /* Enable PCF on [5211+] */
#define AR5K_STA_ID1_PCF_5210 0x00200000 /* Enable PCF on [5210]*/
#define AR5K_STA_ID1_PCF (ah->ah_version == AR5K_AR5210 ? \
AR5K_STA_ID1_PCF_5210 : AR5K_STA_ID1_PCF_5211)
#define AR5K_STA_ID1_DEFAULT_ANTENNA 0x00200000 /* Use default antenna */
#define AR5K_STA_ID1_DESC_ANTENNA 0x00400000 /* Update antenna from descriptor */
#define AR5K_STA_ID1_RTS_DEF_ANTENNA 0x00800000 /* Use default antenna for RTS */
#define AR5K_STA_ID1_ACKCTS_6MB 0x01000000 /* Use 6Mbit/s for ACK/CTS */
#define AR5K_STA_ID1_BASE_RATE_11B 0x02000000 /* Use 11b base rate for ACK/CTS [5211+] */
#define AR5K_STA_ID1_SELFGEN_DEF_ANT 0x04000000 /* Use def. antenna for self generated frames */
#define AR5K_STA_ID1_CRYPT_MIC_EN 0x08000000 /* Enable MIC */
#define AR5K_STA_ID1_KEYSRCH_MODE 0x10000000 /* Look up key when key id != 0 */
#define AR5K_STA_ID1_PRESERVE_SEQ_NUM 0x20000000 /* Preserve sequence number */
#define AR5K_STA_ID1_CBCIV_ENDIAN 0x40000000 /* ??? */
#define AR5K_STA_ID1_KEYSRCH_MCAST 0x80000000 /* Do key cache search for mcast frames */
#define AR5K_STA_ID1_ANTENNA_SETTINGS (AR5K_STA_ID1_DEFAULT_ANTENNA | \
AR5K_STA_ID1_DESC_ANTENNA | \
AR5K_STA_ID1_RTS_DEF_ANTENNA | \
AR5K_STA_ID1_SELFGEN_DEF_ANT)
/*
* First BSSID register (MAC address, lower 32bits)
*/
#define AR5K_BSS_ID0 0x8008
/*
* Second BSSID register (MAC address in upper 16 bits)
*
* AID: Association ID
*/
#define AR5K_BSS_ID1 0x800c
#define AR5K_BSS_ID1_AID 0xffff0000
#define AR5K_BSS_ID1_AID_S 16
/*
* Backoff slot time register
*/
#define AR5K_SLOT_TIME 0x8010
/*
* ACK/CTS timeout register
*/
#define AR5K_TIME_OUT 0x8014 /* Register Address */
#define AR5K_TIME_OUT_ACK 0x00001fff /* ACK timeout mask */
#define AR5K_TIME_OUT_ACK_S 0
#define AR5K_TIME_OUT_CTS 0x1fff0000 /* CTS timeout mask */
#define AR5K_TIME_OUT_CTS_S 16
/*
* RSSI threshold register
*/
#define AR5K_RSSI_THR 0x8018 /* Register Address */
#define AR5K_RSSI_THR_M 0x000000ff /* Mask for RSSI threshold [5211+] */
#define AR5K_RSSI_THR_BMISS_5210 0x00000700 /* Mask for Beacon Missed threshold [5210] */
#define AR5K_RSSI_THR_BMISS_5210_S 8
#define AR5K_RSSI_THR_BMISS_5211 0x0000ff00 /* Mask for Beacon Missed threshold [5211+] */
#define AR5K_RSSI_THR_BMISS_5211_S 8
#define AR5K_RSSI_THR_BMISS (ah->ah_version == AR5K_AR5210 ? \
AR5K_RSSI_THR_BMISS_5210 : AR5K_RSSI_THR_BMISS_5211)
#define AR5K_RSSI_THR_BMISS_S 8
/*
* 5210 has more PCU registers because there is no QCU/DCU
* so queue parameters are set here, this way a lot common
* registers have different address for 5210. To make things
* easier we define a macro based on ah->ah_version for common
* registers with different addresses and common flags.
*/
/*
* Retry limit register
*
* Retry limit register for 5210 (no QCU/DCU so it's done in PCU)
*/
#define AR5K_NODCU_RETRY_LMT 0x801c /* Register Address */
#define AR5K_NODCU_RETRY_LMT_SH_RETRY 0x0000000f /* Short retry limit mask */
#define AR5K_NODCU_RETRY_LMT_SH_RETRY_S 0
#define AR5K_NODCU_RETRY_LMT_LG_RETRY 0x000000f0 /* Long retry mask */
#define AR5K_NODCU_RETRY_LMT_LG_RETRY_S 4
#define AR5K_NODCU_RETRY_LMT_SSH_RETRY 0x00003f00 /* Station short retry limit mask */
#define AR5K_NODCU_RETRY_LMT_SSH_RETRY_S 8
#define AR5K_NODCU_RETRY_LMT_SLG_RETRY 0x000fc000 /* Station long retry limit mask */
#define AR5K_NODCU_RETRY_LMT_SLG_RETRY_S 14
#define AR5K_NODCU_RETRY_LMT_CW_MIN 0x3ff00000 /* Minimum contention window mask */
#define AR5K_NODCU_RETRY_LMT_CW_MIN_S 20
/*
* Transmit latency register
*/
#define AR5K_USEC_5210 0x8020 /* Register Address [5210] */
#define AR5K_USEC_5211 0x801c /* Register Address [5211+] */
#define AR5K_USEC (ah->ah_version == AR5K_AR5210 ? \
AR5K_USEC_5210 : AR5K_USEC_5211)
#define AR5K_USEC_1 0x0000007f /* clock cycles for 1us */
#define AR5K_USEC_1_S 0
#define AR5K_USEC_32 0x00003f80 /* clock cycles for 1us while on 32Mhz clock */
#define AR5K_USEC_32_S 7
#define AR5K_USEC_TX_LATENCY_5211 0x007fc000
#define AR5K_USEC_TX_LATENCY_5211_S 14
#define AR5K_USEC_RX_LATENCY_5211 0x1f800000
#define AR5K_USEC_RX_LATENCY_5211_S 23
#define AR5K_USEC_TX_LATENCY_5210 0x000fc000 /* also for 5311 */
#define AR5K_USEC_TX_LATENCY_5210_S 14
#define AR5K_USEC_RX_LATENCY_5210 0x03f00000 /* also for 5311 */
#define AR5K_USEC_RX_LATENCY_5210_S 20
/*
* PCU beacon control register
*/
#define AR5K_BEACON_5210 0x8024 /*Register Address [5210] */
#define AR5K_BEACON_5211 0x8020 /*Register Address [5211+] */
#define AR5K_BEACON (ah->ah_version == AR5K_AR5210 ? \
AR5K_BEACON_5210 : AR5K_BEACON_5211)
#define AR5K_BEACON_PERIOD 0x0000ffff /* Mask for beacon period */
#define AR5K_BEACON_PERIOD_S 0
#define AR5K_BEACON_TIM 0x007f0000 /* Mask for TIM offset */
#define AR5K_BEACON_TIM_S 16
#define AR5K_BEACON_ENABLE 0x00800000 /* Enable beacons */
#define AR5K_BEACON_RESET_TSF 0x01000000 /* Force TSF reset */
/*
* CFP period register
*/
#define AR5K_CFP_PERIOD_5210 0x8028
#define AR5K_CFP_PERIOD_5211 0x8024
#define AR5K_CFP_PERIOD (ah->ah_version == AR5K_AR5210 ? \
AR5K_CFP_PERIOD_5210 : AR5K_CFP_PERIOD_5211)
/*
* Next beacon time register
*/
#define AR5K_TIMER0_5210 0x802c
#define AR5K_TIMER0_5211 0x8028
#define AR5K_TIMER0 (ah->ah_version == AR5K_AR5210 ? \
AR5K_TIMER0_5210 : AR5K_TIMER0_5211)
/*
* Next DMA beacon alert register
*/
#define AR5K_TIMER1_5210 0x8030
#define AR5K_TIMER1_5211 0x802c
#define AR5K_TIMER1 (ah->ah_version == AR5K_AR5210 ? \
AR5K_TIMER1_5210 : AR5K_TIMER1_5211)
/*
* Next software beacon alert register
*/
#define AR5K_TIMER2_5210 0x8034
#define AR5K_TIMER2_5211 0x8030
#define AR5K_TIMER2 (ah->ah_version == AR5K_AR5210 ? \
AR5K_TIMER2_5210 : AR5K_TIMER2_5211)
/*
* Next ATIM window time register
*/
#define AR5K_TIMER3_5210 0x8038
#define AR5K_TIMER3_5211 0x8034
#define AR5K_TIMER3 (ah->ah_version == AR5K_AR5210 ? \
AR5K_TIMER3_5210 : AR5K_TIMER3_5211)
/*
* 5210 First inter frame spacing register (IFS)
*/
#define AR5K_IFS0 0x8040
#define AR5K_IFS0_SIFS 0x000007ff
#define AR5K_IFS0_SIFS_S 0
#define AR5K_IFS0_DIFS 0x007ff800
#define AR5K_IFS0_DIFS_S 11
/*
* 5210 Second inter frame spacing register (IFS)
*/
#define AR5K_IFS1 0x8044
#define AR5K_IFS1_PIFS 0x00000fff
#define AR5K_IFS1_PIFS_S 0
#define AR5K_IFS1_EIFS 0x03fff000
#define AR5K_IFS1_EIFS_S 12
#define AR5K_IFS1_CS_EN 0x04000000
/*
* CFP duration register
*/
#define AR5K_CFP_DUR_5210 0x8048
#define AR5K_CFP_DUR_5211 0x8038
#define AR5K_CFP_DUR (ah->ah_version == AR5K_AR5210 ? \
AR5K_CFP_DUR_5210 : AR5K_CFP_DUR_5211)
/*
* Receive filter register
*/
#define AR5K_RX_FILTER_5210 0x804c /* Register Address [5210] */
#define AR5K_RX_FILTER_5211 0x803c /* Register Address [5211+] */
#define AR5K_RX_FILTER (ah->ah_version == AR5K_AR5210 ? \
AR5K_RX_FILTER_5210 : AR5K_RX_FILTER_5211)
#define AR5K_RX_FILTER_UCAST 0x00000001 /* Don't filter unicast frames */
#define AR5K_RX_FILTER_MCAST 0x00000002 /* Don't filter multicast frames */
#define AR5K_RX_FILTER_BCAST 0x00000004 /* Don't filter broadcast frames */
#define AR5K_RX_FILTER_CONTROL 0x00000008 /* Don't filter control frames */
#define AR5K_RX_FILTER_BEACON 0x00000010 /* Don't filter beacon frames */
#define AR5K_RX_FILTER_PROM 0x00000020 /* Set promiscuous mode */
#define AR5K_RX_FILTER_XRPOLL 0x00000040 /* Don't filter XR poll frame [5212+] */
#define AR5K_RX_FILTER_PROBEREQ 0x00000080 /* Don't filter probe requests [5212+] */
#define AR5K_RX_FILTER_PHYERR_5212 0x00000100 /* Don't filter phy errors [5212+] */
#define AR5K_RX_FILTER_RADARERR_5212 0x00000200 /* Don't filter phy radar errors [5212+] */
#define AR5K_RX_FILTER_PHYERR_5211 0x00000040 /* [5211] */
#define AR5K_RX_FILTER_RADARERR_5211 0x00000080 /* [5211] */
#define AR5K_RX_FILTER_PHYERR \
((ah->ah_version == AR5K_AR5211 ? \
AR5K_RX_FILTER_PHYERR_5211 : AR5K_RX_FILTER_PHYERR_5212))
#define AR5K_RX_FILTER_RADARERR \
((ah->ah_version == AR5K_AR5211 ? \
AR5K_RX_FILTER_RADARERR_5211 : AR5K_RX_FILTER_RADARERR_5212))
/*
* Multicast filter register (lower 32 bits)
*/
#define AR5K_MCAST_FILTER0_5210 0x8050
#define AR5K_MCAST_FILTER0_5211 0x8040
#define AR5K_MCAST_FILTER0 (ah->ah_version == AR5K_AR5210 ? \
AR5K_MCAST_FILTER0_5210 : AR5K_MCAST_FILTER0_5211)
/*
* Multicast filter register (higher 16 bits)
*/
#define AR5K_MCAST_FILTER1_5210 0x8054
#define AR5K_MCAST_FILTER1_5211 0x8044
#define AR5K_MCAST_FILTER1 (ah->ah_version == AR5K_AR5210 ? \
AR5K_MCAST_FILTER1_5210 : AR5K_MCAST_FILTER1_5211)
/*
* Transmit mask register (lower 32 bits) [5210]
*/
#define AR5K_TX_MASK0 0x8058
/*
* Transmit mask register (higher 16 bits) [5210]
*/
#define AR5K_TX_MASK1 0x805c
/*
* Clear transmit mask [5210]
*/
#define AR5K_CLR_TMASK 0x8060
/*
* Trigger level register (before transmission) [5210]
*/
#define AR5K_TRIG_LVL 0x8064
/*
* PCU control register
*
* Only DIS_RX is used in the code, the rest i guess are
* for tweaking/diagnostics.
*/
#define AR5K_DIAG_SW_5210 0x8068 /* Register Address [5210] */
#define AR5K_DIAG_SW_5211 0x8048 /* Register Address [5211+] */
#define AR5K_DIAG_SW (ah->ah_version == AR5K_AR5210 ? \
AR5K_DIAG_SW_5210 : AR5K_DIAG_SW_5211)
#define AR5K_DIAG_SW_DIS_WEP_ACK 0x00000001 /* Disable ACKs if WEP key is invalid */
#define AR5K_DIAG_SW_DIS_ACK 0x00000002 /* Disable ACKs */
#define AR5K_DIAG_SW_DIS_CTS 0x00000004 /* Disable CTSs */
#define AR5K_DIAG_SW_DIS_ENC 0x00000008 /* Disable encryption */
#define AR5K_DIAG_SW_DIS_DEC 0x00000010 /* Disable decryption */
#define AR5K_DIAG_SW_DIS_TX 0x00000020 /* Disable transmit [5210] */
#define AR5K_DIAG_SW_DIS_RX_5210 0x00000040 /* Disable recieve */
#define AR5K_DIAG_SW_DIS_RX_5211 0x00000020
#define AR5K_DIAG_SW_DIS_RX (ah->ah_version == AR5K_AR5210 ? \
AR5K_DIAG_SW_DIS_RX_5210 : AR5K_DIAG_SW_DIS_RX_5211)
#define AR5K_DIAG_SW_LOOP_BACK_5210 0x00000080 /* Loopback (i guess it goes with DIS_TX) [5210] */
#define AR5K_DIAG_SW_LOOP_BACK_5211 0x00000040
#define AR5K_DIAG_SW_LOOP_BACK (ah->ah_version == AR5K_AR5210 ? \
AR5K_DIAG_SW_LOOP_BACK_5210 : AR5K_DIAG_SW_LOOP_BACK_5211)
#define AR5K_DIAG_SW_CORR_FCS_5210 0x00000100 /* Corrupted FCS */
#define AR5K_DIAG_SW_CORR_FCS_5211 0x00000080
#define AR5K_DIAG_SW_CORR_FCS (ah->ah_version == AR5K_AR5210 ? \
AR5K_DIAG_SW_CORR_FCS_5210 : AR5K_DIAG_SW_CORR_FCS_5211)
#define AR5K_DIAG_SW_CHAN_INFO_5210 0x00000200 /* Dump channel info */
#define AR5K_DIAG_SW_CHAN_INFO_5211 0x00000100
#define AR5K_DIAG_SW_CHAN_INFO (ah->ah_version == AR5K_AR5210 ? \
AR5K_DIAG_SW_CHAN_INFO_5210 : AR5K_DIAG_SW_CHAN_INFO_5211)
#define AR5K_DIAG_SW_EN_SCRAM_SEED_5210 0x00000400 /* Enable fixed scrambler seed */
#define AR5K_DIAG_SW_EN_SCRAM_SEED_5211 0x00000200
#define AR5K_DIAG_SW_EN_SCRAM_SEED (ah->ah_version == AR5K_AR5210 ? \
AR5K_DIAG_SW_EN_SCRAM_SEED_5210 : AR5K_DIAG_SW_EN_SCRAM_SEED_5211)
#define AR5K_DIAG_SW_ECO_ENABLE 0x00000400 /* [5211+] */
#define AR5K_DIAG_SW_SCVRAM_SEED 0x0003f800 /* [5210] */
#define AR5K_DIAG_SW_SCRAM_SEED_M 0x0001fc00 /* Scrambler seed mask */
#define AR5K_DIAG_SW_SCRAM_SEED_S 10
#define AR5K_DIAG_SW_DIS_SEQ_INC 0x00040000 /* Disable seqnum increment (?)[5210] */
#define AR5K_DIAG_SW_FRAME_NV0_5210 0x00080000
#define AR5K_DIAG_SW_FRAME_NV0_5211 0x00020000 /* Accept frames of non-zero protocol number */
#define AR5K_DIAG_SW_FRAME_NV0 (ah->ah_version == AR5K_AR5210 ? \
AR5K_DIAG_SW_FRAME_NV0_5210 : AR5K_DIAG_SW_FRAME_NV0_5211)
#define AR5K_DIAG_SW_OBSPT_M 0x000c0000 /* Observation point select (?) */
#define AR5K_DIAG_SW_OBSPT_S 18
#define AR5K_DIAG_SW_RX_CLEAR_HIGH 0x0010000 /* Force RX Clear high */
#define AR5K_DIAG_SW_IGNORE_CARR_SENSE 0x0020000 /* Ignore virtual carrier sense */
#define AR5K_DIAG_SW_CHANEL_IDLE_HIGH 0x0040000 /* Force channel idle high */
#define AR5K_DIAG_SW_PHEAR_ME 0x0080000 /* ??? */
/*
* TSF (clock) register (lower 32 bits)
*/
#define AR5K_TSF_L32_5210 0x806c
#define AR5K_TSF_L32_5211 0x804c
#define AR5K_TSF_L32 (ah->ah_version == AR5K_AR5210 ? \
AR5K_TSF_L32_5210 : AR5K_TSF_L32_5211)
/*
* TSF (clock) register (higher 32 bits)
*/
#define AR5K_TSF_U32_5210 0x8070
#define AR5K_TSF_U32_5211 0x8050
#define AR5K_TSF_U32 (ah->ah_version == AR5K_AR5210 ? \
AR5K_TSF_U32_5210 : AR5K_TSF_U32_5211)
/*
* Last beacon timestamp register (Read Only)
*/
#define AR5K_LAST_TSTP 0x8080
/*
* ADDAC test register [5211+]
*/
#define AR5K_ADDAC_TEST 0x8054 /* Register Address */
#define AR5K_ADDAC_TEST_TXCONT 0x00000001 /* Test continuous tx */
#define AR5K_ADDAC_TEST_TST_MODE 0x00000002 /* Test mode */
#define AR5K_ADDAC_TEST_LOOP_EN 0x00000004 /* Enable loop */
#define AR5K_ADDAC_TEST_LOOP_LEN 0x00000008 /* Loop length (field) */
#define AR5K_ADDAC_TEST_USE_U8 0x00004000 /* Use upper 8 bits */
#define AR5K_ADDAC_TEST_MSB 0x00008000 /* State of MSB */
#define AR5K_ADDAC_TEST_TRIG_SEL 0x00010000 /* Trigger select */
#define AR5K_ADDAC_TEST_TRIG_PTY 0x00020000 /* Trigger polarity */
#define AR5K_ADDAC_TEST_RXCONT 0x00040000 /* Continuous capture */
#define AR5K_ADDAC_TEST_CAPTURE 0x00080000 /* Begin capture */
#define AR5K_ADDAC_TEST_TST_ARM 0x00100000 /* ARM rx buffer for capture */
/*
* Default antenna register [5211+]
*/
#define AR5K_DEFAULT_ANTENNA 0x8058
/*
* Frame control QoS mask register (?) [5211+]
* (FC_QOS_MASK)
*/
#define AR5K_FRAME_CTL_QOSM 0x805c
/*
* Seq mask register (?) [5211+]
*/
#define AR5K_SEQ_MASK 0x8060
/*
* Retry count register [5210]
*/
#define AR5K_RETRY_CNT 0x8084 /* Register Address [5210] */
#define AR5K_RETRY_CNT_SSH 0x0000003f /* Station short retry count (?) */
#define AR5K_RETRY_CNT_SLG 0x00000fc0 /* Station long retry count (?) */
/*
* Back-off status register [5210]
*/
#define AR5K_BACKOFF 0x8088 /* Register Address [5210] */
#define AR5K_BACKOFF_CW 0x000003ff /* Backoff Contention Window (?) */
#define AR5K_BACKOFF_CNT 0x03ff0000 /* Backoff count (?) */
/*
* NAV register (current)
*/
#define AR5K_NAV_5210 0x808c
#define AR5K_NAV_5211 0x8084
#define AR5K_NAV (ah->ah_version == AR5K_AR5210 ? \
AR5K_NAV_5210 : AR5K_NAV_5211)
/*
* RTS success register
*/
#define AR5K_RTS_OK_5210 0x8090
#define AR5K_RTS_OK_5211 0x8088
#define AR5K_RTS_OK (ah->ah_version == AR5K_AR5210 ? \
AR5K_RTS_OK_5210 : AR5K_RTS_OK_5211)
/*
* RTS failure register
*/
#define AR5K_RTS_FAIL_5210 0x8094
#define AR5K_RTS_FAIL_5211 0x808c
#define AR5K_RTS_FAIL (ah->ah_version == AR5K_AR5210 ? \
AR5K_RTS_FAIL_5210 : AR5K_RTS_FAIL_5211)
/*
* ACK failure register
*/
#define AR5K_ACK_FAIL_5210 0x8098
#define AR5K_ACK_FAIL_5211 0x8090
#define AR5K_ACK_FAIL (ah->ah_version == AR5K_AR5210 ? \
AR5K_ACK_FAIL_5210 : AR5K_ACK_FAIL_5211)
/*
* FCS failure register
*/
#define AR5K_FCS_FAIL_5210 0x809c
#define AR5K_FCS_FAIL_5211 0x8094
#define AR5K_FCS_FAIL (ah->ah_version == AR5K_AR5210 ? \
AR5K_FCS_FAIL_5210 : AR5K_FCS_FAIL_5211)
/*
* Beacon count register
*/
#define AR5K_BEACON_CNT_5210 0x80a0
#define AR5K_BEACON_CNT_5211 0x8098
#define AR5K_BEACON_CNT (ah->ah_version == AR5K_AR5210 ? \
AR5K_BEACON_CNT_5210 : AR5K_BEACON_CNT_5211)
/*===5212 Specific PCU registers===*/
/*
* Transmit power control register
*/
#define AR5K_TPC 0x80e8
#define AR5K_TPC_ACK 0x0000003f /* ack frames */
#define AR5K_TPC_ACK_S 0
#define AR5K_TPC_CTS 0x00003f00 /* cts frames */
#define AR5K_TPC_CTS_S 8
#define AR5K_TPC_CHIRP 0x003f0000 /* chirp frames */
#define AR5K_TPC_CHIRP_S 16
#define AR5K_TPC_DOPPLER 0x0f000000 /* doppler chirp span */
#define AR5K_TPC_DOPPLER_S 24
/*
* XR (eXtended Range) mode register
*/
#define AR5K_XRMODE 0x80c0 /* Register Address */
#define AR5K_XRMODE_POLL_TYPE_M 0x0000003f /* Mask for Poll type (?) */
#define AR5K_XRMODE_POLL_TYPE_S 0
#define AR5K_XRMODE_POLL_SUBTYPE_M 0x0000003c /* Mask for Poll subtype (?) */
#define AR5K_XRMODE_POLL_SUBTYPE_S 2
#define AR5K_XRMODE_POLL_WAIT_ALL 0x00000080 /* Wait for poll */
#define AR5K_XRMODE_SIFS_DELAY 0x000fff00 /* Mask for SIFS delay */
#define AR5K_XRMODE_FRAME_HOLD_M 0xfff00000 /* Mask for frame hold (?) */
#define AR5K_XRMODE_FRAME_HOLD_S 20
/*
* XR delay register
*/
#define AR5K_XRDELAY 0x80c4 /* Register Address */
#define AR5K_XRDELAY_SLOT_DELAY_M 0x0000ffff /* Mask for slot delay */
#define AR5K_XRDELAY_SLOT_DELAY_S 0
#define AR5K_XRDELAY_CHIRP_DELAY_M 0xffff0000 /* Mask for CHIRP data delay */
#define AR5K_XRDELAY_CHIRP_DELAY_S 16
/*
* XR timeout register
*/
#define AR5K_XRTIMEOUT 0x80c8 /* Register Address */
#define AR5K_XRTIMEOUT_CHIRP_M 0x0000ffff /* Mask for CHIRP timeout */
#define AR5K_XRTIMEOUT_CHIRP_S 0
#define AR5K_XRTIMEOUT_POLL_M 0xffff0000 /* Mask for Poll timeout */
#define AR5K_XRTIMEOUT_POLL_S 16
/*
* XR chirp register
*/
#define AR5K_XRCHIRP 0x80cc /* Register Address */
#define AR5K_XRCHIRP_SEND 0x00000001 /* Send CHIRP */
#define AR5K_XRCHIRP_GAP 0xffff0000 /* Mask for CHIRP gap (?) */
/*
* XR stomp register
*/
#define AR5K_XRSTOMP 0x80d0 /* Register Address */
#define AR5K_XRSTOMP_TX 0x00000001 /* Stomp Tx (?) */
#define AR5K_XRSTOMP_RX 0x00000002 /* Stomp Rx (?) */
#define AR5K_XRSTOMP_TX_RSSI 0x00000004 /* Stomp Tx RSSI (?) */
#define AR5K_XRSTOMP_TX_BSSID 0x00000008 /* Stomp Tx BSSID (?) */
#define AR5K_XRSTOMP_DATA 0x00000010 /* Stomp data (?)*/
#define AR5K_XRSTOMP_RSSI_THRES 0x0000ff00 /* Mask for XR RSSI threshold */
/*
* First enhanced sleep register
*/
#define AR5K_SLEEP0 0x80d4 /* Register Address */
#define AR5K_SLEEP0_NEXT_DTIM 0x0007ffff /* Mask for next DTIM (?) */
#define AR5K_SLEEP0_NEXT_DTIM_S 0
#define AR5K_SLEEP0_ASSUME_DTIM 0x00080000 /* Assume DTIM */
#define AR5K_SLEEP0_ENH_SLEEP_EN 0x00100000 /* Enable enchanced sleep control */
#define AR5K_SLEEP0_CABTO 0xff000000 /* Mask for CAB Time Out */
#define AR5K_SLEEP0_CABTO_S 24
/*
* Second enhanced sleep register
*/
#define AR5K_SLEEP1 0x80d8 /* Register Address */
#define AR5K_SLEEP1_NEXT_TIM 0x0007ffff /* Mask for next TIM (?) */
#define AR5K_SLEEP1_NEXT_TIM_S 0
#define AR5K_SLEEP1_BEACON_TO 0xff000000 /* Mask for Beacon Time Out */
#define AR5K_SLEEP1_BEACON_TO_S 24
/*
* Third enhanced sleep register
*/
#define AR5K_SLEEP2 0x80dc /* Register Address */
#define AR5K_SLEEP2_TIM_PER 0x0000ffff /* Mask for TIM period (?) */
#define AR5K_SLEEP2_TIM_PER_S 0
#define AR5K_SLEEP2_DTIM_PER 0xffff0000 /* Mask for DTIM period (?) */
#define AR5K_SLEEP2_DTIM_PER_S 16
/*
* BSSID mask registers
*/
#define AR5K_BSS_IDM0 0x80e0 /* Upper bits */
#define AR5K_BSS_IDM1 0x80e4 /* Lower bits */
/*
* TX power control (TPC) register
*
* XXX: PCDAC steps (0.5dbm) or DBM ?
*
*/
#define AR5K_TXPC 0x80e8 /* Register Address */
#define AR5K_TXPC_ACK_M 0x0000003f /* ACK tx power */
#define AR5K_TXPC_ACK_S 0
#define AR5K_TXPC_CTS_M 0x00003f00 /* CTS tx power */
#define AR5K_TXPC_CTS_S 8
#define AR5K_TXPC_CHIRP_M 0x003f0000 /* CHIRP tx power */
#define AR5K_TXPC_CHIRP_S 16
#define AR5K_TXPC_DOPPLER 0x0f000000 /* Doppler chirp span (?) */
#define AR5K_TXPC_DOPPLER_S 24
/*
* Profile count registers
*/
#define AR5K_PROFCNT_TX 0x80ec /* Tx count */
#define AR5K_PROFCNT_RX 0x80f0 /* Rx count */
#define AR5K_PROFCNT_RXCLR 0x80f4 /* Clear Rx count */
#define AR5K_PROFCNT_CYCLE 0x80f8 /* Cycle count (?) */
/*
* Quiet period control registers
*/
#define AR5K_QUIET_CTL1 0x80fc /* Register Address */
#define AR5K_QUIET_CTL1_NEXT_QT_TSF 0x0000ffff /* Next quiet period TSF (TU) */
#define AR5K_QUIET_CTL1_NEXT_QT_TSF_S 0
#define AR5K_QUIET_CTL1_QT_EN 0x00010000 /* Enable quiet period */
#define AR5K_QUIET_CTL1_ACK_CTS_EN 0x00020000 /* Send ACK/CTS during quiet period */
#define AR5K_QUIET_CTL2 0x8100 /* Register Address */
#define AR5K_QUIET_CTL2_QT_PER 0x0000ffff /* Mask for quiet period periodicity */
#define AR5K_QUIET_CTL2_QT_PER_S 0
#define AR5K_QUIET_CTL2_QT_DUR 0xffff0000 /* Mask for quiet period duration */
#define AR5K_QUIET_CTL2_QT_DUR_S 16
/*
* TSF parameter register
*/
#define AR5K_TSF_PARM 0x8104 /* Register Address */
#define AR5K_TSF_PARM_INC 0x000000ff /* Mask for TSF increment */
#define AR5K_TSF_PARM_INC_S 0
/*
* QoS NOACK policy
*/
#define AR5K_QOS_NOACK 0x8108 /* Register Address */
#define AR5K_QOS_NOACK_2BIT_VALUES 0x0000000f /* ??? */
#define AR5K_QOS_NOACK_2BIT_VALUES_S 0
#define AR5K_QOS_NOACK_BIT_OFFSET 0x00000070 /* ??? */
#define AR5K_QOS_NOACK_BIT_OFFSET_S 4
#define AR5K_QOS_NOACK_BYTE_OFFSET 0x00000180 /* ??? */
#define AR5K_QOS_NOACK_BYTE_OFFSET_S 7
/*
* PHY error filter register
*/
#define AR5K_PHY_ERR_FIL 0x810c
#define AR5K_PHY_ERR_FIL_RADAR 0x00000020 /* Radar signal */
#define AR5K_PHY_ERR_FIL_OFDM 0x00020000 /* OFDM false detect (ANI) */
#define AR5K_PHY_ERR_FIL_CCK 0x02000000 /* CCK false detect (ANI) */
/*
* XR latency register
*/
#define AR5K_XRLAT_TX 0x8110
/*
* ACK SIFS register
*/
#define AR5K_ACKSIFS 0x8114 /* Register Address */
#define AR5K_ACKSIFS_INC 0x00000000 /* ACK SIFS Increment (field) */
/*
* MIC QoS control register (?)
*/
#define AR5K_MIC_QOS_CTL 0x8118 /* Register Address */
#define AR5K_MIC_QOS_CTL_OFF(_n) (1 << (_n * 2))
#define AR5K_MIC_QOS_CTL_MQ_EN 0x00010000 /* Enable MIC QoS */
/*
* MIC QoS select register (?)
*/
#define AR5K_MIC_QOS_SEL 0x811c
#define AR5K_MIC_QOS_SEL_OFF(_n) (1 << (_n * 4))
/*
* Misc mode control register (?)
*/
#define AR5K_MISC_MODE 0x8120 /* Register Address */
#define AR5K_MISC_MODE_FBSSID_MATCH 0x00000001 /* Force BSSID match */
#define AR5K_MISC_MODE_ACKSIFS_MEM 0x00000002 /* ACK SIFS memory (?) */
#define AR5K_MISC_MODE_COMBINED_MIC 0x00000004 /* use rx/tx MIC key */
/* more bits */
/*
* OFDM Filter counter
*/
#define AR5K_OFDM_FIL_CNT 0x8124
/*
* CCK Filter counter
*/
#define AR5K_CCK_FIL_CNT 0x8128
/*
* PHY Error Counters (?)
*/
#define AR5K_PHYERR_CNT1 0x812c
#define AR5K_PHYERR_CNT1_MASK 0x8130
#define AR5K_PHYERR_CNT2 0x8134
#define AR5K_PHYERR_CNT2_MASK 0x8138
/*
* TSF Threshold register (?)
*/
#define AR5K_TSF_THRES 0x813c
/*
* TODO: Wake On Wireless registers
* Range: 0x8147 - 0x818c
*/
/*
* Rate -> ACK SIFS mapping table (32 entries)
*/
#define AR5K_RATE_ACKSIFS_BASE 0x8680 /* Register Address */
#define AR5K_RATE_ACKSIFS(_n) (AR5K_RATE_ACKSIFS_BSE + ((_n) << 2))
#define AR5K_RATE_ACKSIFS_NORMAL 0x00000001 /* Normal SIFS (field) */
#define AR5K_RATE_ACKSIFS_TURBO 0x00000400 /* Turbo SIFS (field) */
/*
* Rate -> duration mapping table (32 entries)
*/
#define AR5K_RATE_DUR_BASE 0x8700
#define AR5K_RATE_DUR(_n) (AR5K_RATE_DUR_BASE + ((_n) << 2))
/*
* Rate -> db mapping table
* (8 entries, each one has 4 8bit fields)
*/
#define AR5K_RATE2DB_BASE 0x87c0
#define AR5K_RATE2DB(_n) (AR5K_RATE2DB_BASE + ((_n) << 2))
/*
* db -> Rate mapping table
* (8 entries, each one has 4 8bit fields)
*/
#define AR5K_DB2RATE_BASE 0x87e0
#define AR5K_DB2RATE(_n) (AR5K_DB2RATE_BASE + ((_n) << 2))
/*===5212 end===*/
/*
* Key table (WEP) register
*/
#define AR5K_KEYTABLE_0_5210 0x9000
#define AR5K_KEYTABLE_0_5211 0x8800
#define AR5K_KEYTABLE_5210(_n) (AR5K_KEYTABLE_0_5210 + ((_n) << 5))
#define AR5K_KEYTABLE_5211(_n) (AR5K_KEYTABLE_0_5211 + ((_n) << 5))
#define AR5K_KEYTABLE(_n) (ah->ah_version == AR5K_AR5210 ? \
AR5K_KEYTABLE_5210(_n) : AR5K_KEYTABLE_5211(_n))
#define AR5K_KEYTABLE_OFF(_n, x) (AR5K_KEYTABLE(_n) + (x << 2))
#define AR5K_KEYTABLE_TYPE(_n) AR5K_KEYTABLE_OFF(_n, 5)
#define AR5K_KEYTABLE_TYPE_40 0x00000000
#define AR5K_KEYTABLE_TYPE_104 0x00000001
#define AR5K_KEYTABLE_TYPE_128 0x00000003
#define AR5K_KEYTABLE_TYPE_TKIP 0x00000004 /* [5212+] */
#define AR5K_KEYTABLE_TYPE_AES 0x00000005 /* [5211+] */
#define AR5K_KEYTABLE_TYPE_CCM 0x00000006 /* [5212+] */
#define AR5K_KEYTABLE_TYPE_NULL 0x00000007 /* [5211+] */
#define AR5K_KEYTABLE_ANTENNA 0x00000008 /* [5212+] */
#define AR5K_KEYTABLE_MAC0(_n) AR5K_KEYTABLE_OFF(_n, 6)
#define AR5K_KEYTABLE_MAC1(_n) AR5K_KEYTABLE_OFF(_n, 7)
#define AR5K_KEYTABLE_VALID 0x00008000
/* If key type is TKIP and MIC is enabled
* MIC key goes in offset entry + 64 */
#define AR5K_KEYTABLE_MIC_OFFSET 64
/* WEP 40-bit = 40-bit entered key + 24 bit IV = 64-bit
* WEP 104-bit = 104-bit entered key + 24-bit IV = 128-bit
* WEP 128-bit = 128-bit entered key + 24 bit IV = 152-bit
*
* Some vendors have introduced bigger WEP keys to address
* security vulnerabilities in WEP. This includes:
*
* WEP 232-bit = 232-bit entered key + 24 bit IV = 256-bit
*
* We can expand this if we find ar5k Atheros cards with a larger
* key table size.
*/
#define AR5K_KEYTABLE_SIZE_5210 64
#define AR5K_KEYTABLE_SIZE_5211 128
#define AR5K_KEYTABLE_SIZE (ah->ah_version == AR5K_AR5210 ? \
AR5K_KEYTABLE_SIZE_5210 : AR5K_KEYTABLE_SIZE_5211)
/*===PHY REGISTERS===*/
/*
* PHY registers start
*/
#define AR5K_PHY_BASE 0x9800
#define AR5K_PHY(_n) (AR5K_PHY_BASE + ((_n) << 2))
/*
* TST_2 (Misc config parameters)
*/
#define AR5K_PHY_TST2 0x9800 /* Register Address */
#define AR5K_PHY_TST2_TRIG_SEL 0x00000007 /* Trigger select (?)*/
#define AR5K_PHY_TST2_TRIG 0x00000010 /* Trigger (?) */
#define AR5K_PHY_TST2_CBUS_MODE 0x00000060 /* Cardbus mode (?) */
#define AR5K_PHY_TST2_CLK32 0x00000400 /* CLK_OUT is CLK32 (32Khz external) */
#define AR5K_PHY_TST2_CHANCOR_DUMP_EN 0x00000800 /* Enable Chancor dump (?) */
#define AR5K_PHY_TST2_EVEN_CHANCOR_DUMP 0x00001000 /* Even Chancor dump (?) */
#define AR5K_PHY_TST2_RFSILENT_EN 0x00002000 /* Enable RFSILENT */
#define AR5K_PHY_TST2_ALT_RFDATA 0x00004000 /* Alternate RFDATA (5-2GHz switch ?) */
#define AR5K_PHY_TST2_MINI_OBS_EN 0x00008000 /* Enable mini OBS (?) */
#define AR5K_PHY_TST2_RX2_IS_RX5_INV 0x00010000 /* 2GHz rx path is the 5GHz path inverted (?) */
#define AR5K_PHY_TST2_SLOW_CLK160 0x00020000 /* Slow CLK160 (?) */
#define AR5K_PHY_TST2_AGC_OBS_SEL_3 0x00040000 /* AGC OBS Select 3 (?) */
#define AR5K_PHY_TST2_BBB_OBS_SEL 0x00080000 /* BB OBS Select (field ?) */
#define AR5K_PHY_TST2_ADC_OBS_SEL 0x00800000 /* ADC OBS Select (field ?) */
#define AR5K_PHY_TST2_RX_CLR_SEL 0x08000000 /* RX Clear Select (?) */
#define AR5K_PHY_TST2_FORCE_AGC_CLR 0x10000000 /* Force AGC clear (?) */
#define AR5K_PHY_SHIFT_2GHZ 0x00004007 /* Used to access 2GHz radios */
#define AR5K_PHY_SHIFT_5GHZ 0x00000007 /* Used to access 5GHz radios (default) */
/*
* PHY frame control register [5110] /turbo mode register [5111+]
*
* There is another frame control register for [5111+]
* at address 0x9944 (see below) but the 2 first flags
* are common here between 5110 frame control register
* and [5111+] turbo mode register, so this also works as
* a "turbo mode register" for 5110. We treat this one as
* a frame control register for 5110 below.
*/
#define AR5K_PHY_TURBO 0x9804 /* Register Address */
#define AR5K_PHY_TURBO_MODE 0x00000001 /* Enable turbo mode */
#define AR5K_PHY_TURBO_SHORT 0x00000002 /* Set short symbols to turbo mode */
#define AR5K_PHY_TURBO_MIMO 0x00000004 /* Set turbo for mimo mimo */
/*
* PHY agility command register
* (aka TST_1)
*/
#define AR5K_PHY_AGC 0x9808 /* Register Address */
#define AR5K_PHY_TST1 0x9808
#define AR5K_PHY_AGC_DISABLE 0x08000000 /* Disable AGC to A2 (?)*/
#define AR5K_PHY_TST1_TXHOLD 0x00003800 /* Set tx hold (?) */
#define AR5K_PHY_TST1_TXSRC_SRC 0x00000002 /* Used with bit 7 (?) */
#define AR5K_PHY_TST1_TXSRC_SRC_S 1
#define AR5K_PHY_TST1_TXSRC_ALT 0x00000080 /* Set input to tsdac (?) */
#define AR5K_PHY_TST1_TXSRC_ALT_S 7
/*
* PHY timing register 3 [5112+]
*/
#define AR5K_PHY_TIMING_3 0x9814
#define AR5K_PHY_TIMING_3_DSC_MAN 0xfffe0000
#define AR5K_PHY_TIMING_3_DSC_MAN_S 17
#define AR5K_PHY_TIMING_3_DSC_EXP 0x0001e000
#define AR5K_PHY_TIMING_3_DSC_EXP_S 13
/*
* PHY chip revision register
*/
#define AR5K_PHY_CHIP_ID 0x9818
/*
* PHY activation register
*/
#define AR5K_PHY_ACT 0x981c /* Register Address */
#define AR5K_PHY_ACT_ENABLE 0x00000001 /* Activate PHY */
#define AR5K_PHY_ACT_DISABLE 0x00000002 /* Deactivate PHY */
/*
* PHY RF control registers
*/
#define AR5K_PHY_RF_CTL2 0x9824 /* Register Address */
#define AR5K_PHY_RF_CTL2_TXF2TXD_START 0x0000000f /* TX frame to TX data start */
#define AR5K_PHY_RF_CTL2_TXF2TXD_START_S 0
#define AR5K_PHY_RF_CTL3 0x9828 /* Register Address */
#define AR5K_PHY_RF_CTL3_TXE2XLNA_ON 0x0000ff00 /* TX end to XLNA on */
#define AR5K_PHY_RF_CTL3_TXE2XLNA_ON_S 8
#define AR5K_PHY_ADC_CTL 0x982c
#define AR5K_PHY_ADC_CTL_INBUFGAIN_OFF 0x00000003
#define AR5K_PHY_ADC_CTL_INBUFGAIN_OFF_S 0
#define AR5K_PHY_ADC_CTL_PWD_DAC_OFF 0x00002000
#define AR5K_PHY_ADC_CTL_PWD_BAND_GAP_OFF 0x00004000
#define AR5K_PHY_ADC_CTL_PWD_ADC_OFF 0x00008000
#define AR5K_PHY_ADC_CTL_INBUFGAIN_ON 0x00030000
#define AR5K_PHY_ADC_CTL_INBUFGAIN_ON_S 16
#define AR5K_PHY_RF_CTL4 0x9834 /* Register Address */
#define AR5K_PHY_RF_CTL4_TXF2XPA_A_ON 0x00000001 /* TX frame to XPA A on (field) */
#define AR5K_PHY_RF_CTL4_TXF2XPA_B_ON 0x00000100 /* TX frame to XPA B on (field) */
#define AR5K_PHY_RF_CTL4_TXE2XPA_A_OFF 0x00010000 /* TX end to XPA A off (field) */
#define AR5K_PHY_RF_CTL4_TXE2XPA_B_OFF 0x01000000 /* TX end to XPA B off (field) */
/*
* Pre-Amplifier control register
* (XPA -> external pre-amplifier)
*/
#define AR5K_PHY_PA_CTL 0x9838 /* Register Address */
#define AR5K_PHY_PA_CTL_XPA_A_HI 0x00000001 /* XPA A high (?) */
#define AR5K_PHY_PA_CTL_XPA_B_HI 0x00000002 /* XPA B high (?) */
#define AR5K_PHY_PA_CTL_XPA_A_EN 0x00000004 /* Enable XPA A */
#define AR5K_PHY_PA_CTL_XPA_B_EN 0x00000008 /* Enable XPA B */
/*
* PHY settling register
*/
#define AR5K_PHY_SETTLING 0x9844 /* Register Address */
#define AR5K_PHY_SETTLING_AGC 0x0000007f /* AGC settling time */
#define AR5K_PHY_SETTLING_AGC_S 0
#define AR5K_PHY_SETTLING_SWITCH 0x00003f80 /* Switch settlig time */
#define AR5K_PHY_SETTLING_SWITCH_S 7
/*
* PHY Gain registers
*/
#define AR5K_PHY_GAIN 0x9848 /* Register Address */
#define AR5K_PHY_GAIN_TXRX_ATTEN 0x0003f000 /* TX-RX Attenuation */
#define AR5K_PHY_GAIN_TXRX_ATTEN_S 12
#define AR5K_PHY_GAIN_TXRX_RF_MAX 0x007c0000
#define AR5K_PHY_GAIN_TXRX_RF_MAX_S 18
#define AR5K_PHY_GAIN_OFFSET 0x984c /* Register Address */
#define AR5K_PHY_GAIN_OFFSET_RXTX_FLAG 0x00020000 /* RX-TX flag (?) */
/*
* Desired ADC/PGA size register
* (for more infos read ANI patent)
*/
#define AR5K_PHY_DESIRED_SIZE 0x9850 /* Register Address */
#define AR5K_PHY_DESIRED_SIZE_ADC 0x000000ff /* ADC desired size */
#define AR5K_PHY_DESIRED_SIZE_ADC_S 0
#define AR5K_PHY_DESIRED_SIZE_PGA 0x0000ff00 /* PGA desired size */
#define AR5K_PHY_DESIRED_SIZE_PGA_S 8
#define AR5K_PHY_DESIRED_SIZE_TOT 0x0ff00000 /* Total desired size */
#define AR5K_PHY_DESIRED_SIZE_TOT_S 20
/*
* PHY signal register
* (for more infos read ANI patent)
*/
#define AR5K_PHY_SIG 0x9858 /* Register Address */
#define AR5K_PHY_SIG_FIRSTEP 0x0003f000 /* FIRSTEP */
#define AR5K_PHY_SIG_FIRSTEP_S 12
#define AR5K_PHY_SIG_FIRPWR 0x03fc0000 /* FIPWR */
#define AR5K_PHY_SIG_FIRPWR_S 18
/*
* PHY coarse agility control register
* (for more infos read ANI patent)
*/
#define AR5K_PHY_AGCCOARSE 0x985c /* Register Address */
#define AR5K_PHY_AGCCOARSE_LO 0x00007f80 /* AGC Coarse low */
#define AR5K_PHY_AGCCOARSE_LO_S 7
#define AR5K_PHY_AGCCOARSE_HI 0x003f8000 /* AGC Coarse high */
#define AR5K_PHY_AGCCOARSE_HI_S 15
/*
* PHY agility control register
*/
#define AR5K_PHY_AGCCTL 0x9860 /* Register address */
#define AR5K_PHY_AGCCTL_CAL 0x00000001 /* Enable PHY calibration */
#define AR5K_PHY_AGCCTL_NF 0x00000002 /* Enable Noise Floor calibration */
#define AR5K_PHY_AGCCTL_OFDM_DIV_DIS 0x00000008 /* Disable antenna diversity on OFDM modes */
#define AR5K_PHY_AGCCTL_NF_EN 0x00008000 /* Enable nf calibration to happen (?) */
#define AR5K_PHY_AGCTL_FLTR_CAL 0x00010000 /* Allow filter calibration (?) */
#define AR5K_PHY_AGCCTL_NF_NOUPDATE 0x00020000 /* Don't update nf automaticaly */
/*
* PHY noise floor status register
*/
#define AR5K_PHY_NF 0x9864 /* Register address */
#define AR5K_PHY_NF_M 0x000001ff /* Noise floor mask */
#define AR5K_PHY_NF_ACTIVE 0x00000100 /* Noise floor calibration still active */
#define AR5K_PHY_NF_RVAL(_n) (((_n) >> 19) & AR5K_PHY_NF_M)
#define AR5K_PHY_NF_AVAL(_n) (-((_n) ^ AR5K_PHY_NF_M) + 1)
#define AR5K_PHY_NF_SVAL(_n) (((_n) & AR5K_PHY_NF_M) | (1 << 9))
#define AR5K_PHY_NF_THRESH62 0x0007f000 /* Thresh62 -check ANI patent- (field) */
#define AR5K_PHY_NF_THRESH62_S 12
#define AR5K_PHY_NF_MINCCA_PWR 0x0ff80000 /* ??? */
#define AR5K_PHY_NF_MINCCA_PWR_S 19
/*
* PHY ADC saturation register [5110]
*/
#define AR5K_PHY_ADCSAT 0x9868
#define AR5K_PHY_ADCSAT_ICNT 0x0001f800
#define AR5K_PHY_ADCSAT_ICNT_S 11
#define AR5K_PHY_ADCSAT_THR 0x000007e0
#define AR5K_PHY_ADCSAT_THR_S 5
/*
* PHY Weak ofdm signal detection threshold registers (ANI) [5212+]
*/
/* High thresholds */
#define AR5K_PHY_WEAK_OFDM_HIGH_THR 0x9868
#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_COUNT 0x0000001f
#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_COUNT_S 0
#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M1 0x00fe0000
#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M1_S 17
#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2 0x7f000000
#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_S 24
/* Low thresholds */
#define AR5K_PHY_WEAK_OFDM_LOW_THR 0x986c
#define AR5K_PHY_WEAK_OFDM_LOW_THR_SELFCOR_EN 0x00000001
#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_COUNT 0x00003f00
#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_COUNT_S 8
#define AR5K_PHY_WEAK_OFDM_LOW_THR_M1 0x001fc000
#define AR5K_PHY_WEAK_OFDM_LOW_THR_M1_S 14
#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2 0x0fe00000
#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_S 21
/*
* PHY sleep registers [5112+]
*/
#define AR5K_PHY_SCR 0x9870
#define AR5K_PHY_SLMT 0x9874
#define AR5K_PHY_SLMT_32MHZ 0x0000007f
#define AR5K_PHY_SCAL 0x9878
#define AR5K_PHY_SCAL_32MHZ 0x0000000e
#define AR5K_PHY_SCAL_32MHZ_2417 0x0000000a
#define AR5K_PHY_SCAL_32MHZ_HB63 0x00000032
/*
* PHY PLL (Phase Locked Loop) control register
*/
#define AR5K_PHY_PLL 0x987c
#define AR5K_PHY_PLL_20MHZ 0x00000013 /* For half rate (?) */
/* 40MHz -> 5GHz band */
#define AR5K_PHY_PLL_40MHZ_5211 0x00000018
#define AR5K_PHY_PLL_40MHZ_5212 0x000000aa
#define AR5K_PHY_PLL_40MHZ_5413 0x00000004
#define AR5K_PHY_PLL_40MHZ (ah->ah_version == AR5K_AR5211 ? \
AR5K_PHY_PLL_40MHZ_5211 : AR5K_PHY_PLL_40MHZ_5212)
/* 44MHz -> 2.4GHz band */
#define AR5K_PHY_PLL_44MHZ_5211 0x00000019
#define AR5K_PHY_PLL_44MHZ_5212 0x000000ab
#define AR5K_PHY_PLL_44MHZ (ah->ah_version == AR5K_AR5211 ? \
AR5K_PHY_PLL_44MHZ_5211 : AR5K_PHY_PLL_44MHZ_5212)
#define AR5K_PHY_PLL_RF5111 0x00000000
#define AR5K_PHY_PLL_RF5112 0x00000040
#define AR5K_PHY_PLL_HALF_RATE 0x00000100
#define AR5K_PHY_PLL_QUARTER_RATE 0x00000200
/*
* RF Buffer register
*
* It's obvious from the code that 0x989c is the buffer register but
* for the other special registers that we write to after sending each
* packet, i have no idea. So i'll name them BUFFER_CONTROL_X registers
* for now. It's interesting that they are also used for some other operations.
*/
#define AR5K_RF_BUFFER 0x989c
#define AR5K_RF_BUFFER_CONTROL_0 0x98c0 /* Channel on 5110 */
#define AR5K_RF_BUFFER_CONTROL_1 0x98c4 /* Bank 7 on 5112 */
#define AR5K_RF_BUFFER_CONTROL_2 0x98cc /* Bank 7 on 5111 */
#define AR5K_RF_BUFFER_CONTROL_3 0x98d0 /* Bank 2 on 5112 */
/* Channel set on 5111 */
/* Used to read radio revision*/
#define AR5K_RF_BUFFER_CONTROL_4 0x98d4 /* RF Stage register on 5110 */
/* Bank 0,1,2,6 on 5111 */
/* Bank 1 on 5112 */
/* Used during activation on 5111 */
#define AR5K_RF_BUFFER_CONTROL_5 0x98d8 /* Bank 3 on 5111 */
/* Used during activation on 5111 */
/* Channel on 5112 */
/* Bank 6 on 5112 */
#define AR5K_RF_BUFFER_CONTROL_6 0x98dc /* Bank 3 on 5112 */
/*
* PHY RF stage register [5210]
*/
#define AR5K_PHY_RFSTG 0x98d4
#define AR5K_PHY_RFSTG_DISABLE 0x00000021
/*
* BIN masks (?)
*/
#define AR5K_PHY_BIN_MASK_1 0x9900
#define AR5K_PHY_BIN_MASK_2 0x9904
#define AR5K_PHY_BIN_MASK_3 0x9908
#define AR5K_PHY_BIN_MASK_CTL 0x990c
#define AR5K_PHY_BIN_MASK_CTL_MASK_4 0x00003fff
#define AR5K_PHY_BIN_MASK_CTL_MASK_4_S 0
#define AR5K_PHY_BIN_MASK_CTL_RATE 0xff000000
#define AR5K_PHY_BIN_MASK_CTL_RATE_S 24
/*
* PHY Antenna control register
*/
#define AR5K_PHY_ANT_CTL 0x9910 /* Register Address */
#define AR5K_PHY_ANT_CTL_TXRX_EN 0x00000001 /* Enable TX/RX (?) */
#define AR5K_PHY_ANT_CTL_SECTORED_ANT 0x00000004 /* Sectored Antenna */
#define AR5K_PHY_ANT_CTL_HITUNE5 0x00000008 /* Hitune5 (?) */
#define AR5K_PHY_ANT_CTL_SWTABLE_IDLE 0x000003f0 /* Switch table idle (?) */
#define AR5K_PHY_ANT_CTL_SWTABLE_IDLE_S 4
/*
* PHY receiver delay register [5111+]
*/
#define AR5K_PHY_RX_DELAY 0x9914 /* Register Address */
#define AR5K_PHY_RX_DELAY_M 0x00003fff /* Mask for RX activate to receive delay (/100ns) */
/*
* PHY max rx length register (?) [5111]
*/
#define AR5K_PHY_MAX_RX_LEN 0x991c
/*
* PHY timing register 4
* I(nphase)/Q(adrature) calibration register [5111+]
*/
#define AR5K_PHY_IQ 0x9920 /* Register Address */
#define AR5K_PHY_IQ_CORR_Q_Q_COFF 0x0000001f /* Mask for q correction info */
#define AR5K_PHY_IQ_CORR_Q_I_COFF 0x000007e0 /* Mask for i correction info */
#define AR5K_PHY_IQ_CORR_Q_I_COFF_S 5
#define AR5K_PHY_IQ_CORR_ENABLE 0x00000800 /* Enable i/q correction */
#define AR5K_PHY_IQ_CAL_NUM_LOG_MAX 0x0000f000 /* Mask for max number of samples in log scale */
#define AR5K_PHY_IQ_CAL_NUM_LOG_MAX_S 12
#define AR5K_PHY_IQ_RUN 0x00010000 /* Run i/q calibration */
#define AR5K_PHY_IQ_USE_PT_DF 0x00020000 /* Use pilot track df (?) */
#define AR5K_PHY_IQ_EARLY_TRIG_THR 0x00200000 /* Early trigger threshold (?) (field) */
#define AR5K_PHY_IQ_PILOT_MASK_EN 0x10000000 /* Enable pilot mask (?) */
#define AR5K_PHY_IQ_CHAN_MASK_EN 0x20000000 /* Enable channel mask (?) */
#define AR5K_PHY_IQ_SPUR_FILT_EN 0x40000000 /* Enable spur filter */
#define AR5K_PHY_IQ_SPUR_RSSI_EN 0x80000000 /* Enable spur rssi */
/*
* PHY timing register 5
* OFDM Self-correlator Cyclic RSSI threshold params
* (Check out bb_cycpwr_thr1 on ANI patent)
*/
#define AR5K_PHY_OFDM_SELFCORR 0x9924 /* Register Address */
#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1_EN 0x00000001 /* Enable cyclic RSSI thr 1 */
#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1 0x000000fe /* Mask for Cyclic RSSI threshold 1 */
#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1_S 1
#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR3 0x00000100 /* Cyclic RSSI threshold 3 (field) (?) */
#define AR5K_PHY_OFDM_SELFCORR_RSSI_1ATHR_EN 0x00008000 /* Enable 1A RSSI threshold (?) */
#define AR5K_PHY_OFDM_SELFCORR_RSSI_1ATHR 0x00010000 /* 1A RSSI threshold (field) (?) */
#define AR5K_PHY_OFDM_SELFCORR_LSCTHR_HIRSSI 0x00800000 /* Long sc threshold hi rssi (?) */
/*
* PHY-only warm reset register
*/
#define AR5K_PHY_WARM_RESET 0x9928
/*
* PHY-only control register
*/
#define AR5K_PHY_CTL 0x992c /* Register Address */
#define AR5K_PHY_CTL_RX_DRAIN_RATE 0x00000001 /* RX drain rate (?) */
#define AR5K_PHY_CTL_LATE_TX_SIG_SYM 0x00000002 /* Late tx signal symbol (?) */
#define AR5K_PHY_CTL_GEN_SCRAMBLER 0x00000004 /* Generate scrambler */
#define AR5K_PHY_CTL_TX_ANT_SEL 0x00000008 /* TX antenna select */
#define AR5K_PHY_CTL_TX_ANT_STATIC 0x00000010 /* Static TX antenna */
#define AR5K_PHY_CTL_RX_ANT_SEL 0x00000020 /* RX antenna select */
#define AR5K_PHY_CTL_RX_ANT_STATIC 0x00000040 /* Static RX antenna */
#define AR5K_PHY_CTL_LOW_FREQ_SLE_EN 0x00000080 /* Enable low freq sleep */
/*
* PHY PAPD probe register [5111+]
*/
#define AR5K_PHY_PAPD_PROBE 0x9930
#define AR5K_PHY_PAPD_PROBE_SH_HI_PAR 0x00000001
#define AR5K_PHY_PAPD_PROBE_PCDAC_BIAS 0x00000002
#define AR5K_PHY_PAPD_PROBE_COMP_GAIN 0x00000040
#define AR5K_PHY_PAPD_PROBE_TXPOWER 0x00007e00
#define AR5K_PHY_PAPD_PROBE_TXPOWER_S 9
#define AR5K_PHY_PAPD_PROBE_TX_NEXT 0x00008000
#define AR5K_PHY_PAPD_PROBE_PREDIST_EN 0x00010000
#define AR5K_PHY_PAPD_PROBE_TYPE 0x01800000 /* [5112+] */
#define AR5K_PHY_PAPD_PROBE_TYPE_S 23
#define AR5K_PHY_PAPD_PROBE_TYPE_OFDM 0
#define AR5K_PHY_PAPD_PROBE_TYPE_XR 1
#define AR5K_PHY_PAPD_PROBE_TYPE_CCK 2
#define AR5K_PHY_PAPD_PROBE_GAINF 0xfe000000
#define AR5K_PHY_PAPD_PROBE_GAINF_S 25
#define AR5K_PHY_PAPD_PROBE_INI_5111 0x00004883 /* [5212+] */
#define AR5K_PHY_PAPD_PROBE_INI_5112 0x00004882 /* [5212+] */
/*
* PHY TX rate power registers [5112+]
*/
#define AR5K_PHY_TXPOWER_RATE1 0x9934
#define AR5K_PHY_TXPOWER_RATE2 0x9938
#define AR5K_PHY_TXPOWER_RATE_MAX 0x993c
#define AR5K_PHY_TXPOWER_RATE_MAX_TPC_ENABLE 0x00000040
#define AR5K_PHY_TXPOWER_RATE3 0xa234
#define AR5K_PHY_TXPOWER_RATE4 0xa238
/*
* PHY frame control register [5111+]
*/
#define AR5K_PHY_FRAME_CTL_5210 0x9804
#define AR5K_PHY_FRAME_CTL_5211 0x9944
#define AR5K_PHY_FRAME_CTL (ah->ah_version == AR5K_AR5210 ? \
AR5K_PHY_FRAME_CTL_5210 : AR5K_PHY_FRAME_CTL_5211)
/*---[5111+]---*/
#define AR5K_PHY_FRAME_CTL_TX_CLIP 0x00000038 /* Mask for tx clip (?) */
#define AR5K_PHY_FRAME_CTL_TX_CLIP_S 3
#define AR5K_PHY_FRAME_CTL_PREP_CHINFO 0x00010000 /* Prepend chan info */
#define AR5K_PHY_FRAME_CTL_EMU 0x80000000
#define AR5K_PHY_FRAME_CTL_EMU_S 31
/*---[5110/5111]---*/
#define AR5K_PHY_FRAME_CTL_TIMING_ERR 0x01000000 /* PHY timing error */
#define AR5K_PHY_FRAME_CTL_PARITY_ERR 0x02000000 /* Parity error */
#define AR5K_PHY_FRAME_CTL_ILLRATE_ERR 0x04000000 /* Illegal rate */
#define AR5K_PHY_FRAME_CTL_ILLLEN_ERR 0x08000000 /* Illegal length */
#define AR5K_PHY_FRAME_CTL_SERVICE_ERR 0x20000000
#define AR5K_PHY_FRAME_CTL_TXURN_ERR 0x40000000 /* TX underrun */
#define AR5K_PHY_FRAME_CTL_INI AR5K_PHY_FRAME_CTL_SERVICE_ERR | \
AR5K_PHY_FRAME_CTL_TXURN_ERR | \
AR5K_PHY_FRAME_CTL_ILLLEN_ERR | \
AR5K_PHY_FRAME_CTL_ILLRATE_ERR | \
AR5K_PHY_FRAME_CTL_PARITY_ERR | \
AR5K_PHY_FRAME_CTL_TIMING_ERR
/*
* PHY Tx Power adjustment register [5212A+]
*/
#define AR5K_PHY_TX_PWR_ADJ 0x994c
#define AR5K_PHY_TX_PWR_ADJ_CCK_GAIN_DELTA 0x00000fc0
#define AR5K_PHY_TX_PWR_ADJ_CCK_GAIN_DELTA_S 6
#define AR5K_PHY_TX_PWR_ADJ_CCK_PCDAC_INDEX 0x00fc0000
#define AR5K_PHY_TX_PWR_ADJ_CCK_PCDAC_INDEX_S 18
/*
* PHY radar detection register [5111+]
*/
#define AR5K_PHY_RADAR 0x9954
#define AR5K_PHY_RADAR_ENABLE 0x00000001
#define AR5K_PHY_RADAR_DISABLE 0x00000000
#define AR5K_PHY_RADAR_INBANDTHR 0x0000003e /* Inband threshold
5-bits, units unknown {0..31}
(? MHz ?) */
#define AR5K_PHY_RADAR_INBANDTHR_S 1
#define AR5K_PHY_RADAR_PRSSI_THR 0x00000fc0 /* Pulse RSSI/SNR threshold
6-bits, dBm range {0..63}
in dBm units. */
#define AR5K_PHY_RADAR_PRSSI_THR_S 6
#define AR5K_PHY_RADAR_PHEIGHT_THR 0x0003f000 /* Pulse height threshold
6-bits, dBm range {0..63}
in dBm units. */
#define AR5K_PHY_RADAR_PHEIGHT_THR_S 12
#define AR5K_PHY_RADAR_RSSI_THR 0x00fc0000 /* Radar RSSI/SNR threshold.
6-bits, dBm range {0..63}
in dBm units. */
#define AR5K_PHY_RADAR_RSSI_THR_S 18
#define AR5K_PHY_RADAR_FIRPWR_THR 0x7f000000 /* Finite Impulse Response
filter power out threshold.
7-bits, standard power range
{0..127} in 1/2 dBm units. */
#define AR5K_PHY_RADAR_FIRPWR_THRS 24
/*
* PHY antenna switch table registers
*/
#define AR5K_PHY_ANT_SWITCH_TABLE_0 0x9960
#define AR5K_PHY_ANT_SWITCH_TABLE_1 0x9964
/*
* PHY Noise floor threshold
*/
#define AR5K_PHY_NFTHRES 0x9968
/*
* Sigma Delta register (?) [5213]
*/
#define AR5K_PHY_SIGMA_DELTA 0x996C
#define AR5K_PHY_SIGMA_DELTA_ADC_SEL 0x00000003
#define AR5K_PHY_SIGMA_DELTA_ADC_SEL_S 0
#define AR5K_PHY_SIGMA_DELTA_FILT2 0x000000f8
#define AR5K_PHY_SIGMA_DELTA_FILT2_S 3
#define AR5K_PHY_SIGMA_DELTA_FILT1 0x00001f00
#define AR5K_PHY_SIGMA_DELTA_FILT1_S 8
#define AR5K_PHY_SIGMA_DELTA_ADC_CLIP 0x01ffe000
#define AR5K_PHY_SIGMA_DELTA_ADC_CLIP_S 13
/*
* RF restart register [5112+] (?)
*/
#define AR5K_PHY_RESTART 0x9970 /* restart */
#define AR5K_PHY_RESTART_DIV_GC 0x001c0000 /* Fast diversity gc_limit (?) */
#define AR5K_PHY_RESTART_DIV_GC_S 18
/*
* RF Bus access request register (for synth-oly channel switching)
*/
#define AR5K_PHY_RFBUS_REQ 0x997C
#define AR5K_PHY_RFBUS_REQ_REQUEST 0x00000001
/*
* Spur mitigation masks (?)
*/
#define AR5K_PHY_TIMING_7 0x9980
#define AR5K_PHY_TIMING_8 0x9984
#define AR5K_PHY_TIMING_8_PILOT_MASK_2 0x000fffff
#define AR5K_PHY_TIMING_8_PILOT_MASK_2_S 0
#define AR5K_PHY_BIN_MASK2_1 0x9988
#define AR5K_PHY_BIN_MASK2_2 0x998c
#define AR5K_PHY_BIN_MASK2_3 0x9990
#define AR5K_PHY_BIN_MASK2_4 0x9994
#define AR5K_PHY_BIN_MASK2_4_MASK_4 0x00003fff
#define AR5K_PHY_BIN_MASK2_4_MASK_4_S 0
#define AR5K_PHY_TIMING_9 0x9998
#define AR5K_PHY_TIMING_10 0x999c
#define AR5K_PHY_TIMING_10_PILOT_MASK_2 0x000fffff
#define AR5K_PHY_TIMING_10_PILOT_MASK_2_S 0
/*
* Spur mitigation control
*/
#define AR5K_PHY_TIMING_11 0x99a0 /* Register address */
#define AR5K_PHY_TIMING_11_SPUR_DELTA_PHASE 0x000fffff /* Spur delta phase */
#define AR5K_PHY_TIMING_11_SPUR_DELTA_PHASE_S 0
#define AR5K_PHY_TIMING_11_SPUR_FREQ_SD 0x3ff00000 /* Freq sigma delta */
#define AR5K_PHY_TIMING_11_SPUR_FREQ_SD_S 20
#define AR5K_PHY_TIMING_11_USE_SPUR_IN_AGC 0x40000000 /* Spur filter in AGC detector */
#define AR5K_PHY_TIMING_11_USE_SPUR_IN_SELFCOR 0x80000000 /* Spur filter in OFDM self correlator */
/*
* Gain tables
*/
#define AR5K_BB_GAIN_BASE 0x9b00 /* BaseBand Amplifier Gain table base address */
#define AR5K_BB_GAIN(_n) (AR5K_BB_GAIN_BASE + ((_n) << 2))
#define AR5K_RF_GAIN_BASE 0x9a00 /* RF Amplrifier Gain table base address */
#define AR5K_RF_GAIN(_n) (AR5K_RF_GAIN_BASE + ((_n) << 2))
/*
* PHY timing IQ calibration result register [5111+]
*/
#define AR5K_PHY_IQRES_CAL_PWR_I 0x9c10 /* I (Inphase) power value */
#define AR5K_PHY_IQRES_CAL_PWR_Q 0x9c14 /* Q (Quadrature) power value */
#define AR5K_PHY_IQRES_CAL_CORR 0x9c18 /* I/Q Correlation */
/*
* PHY current RSSI register [5111+]
*/
#define AR5K_PHY_CURRENT_RSSI 0x9c1c
/*
* PHY RF Bus grant register
*/
#define AR5K_PHY_RFBUS_GRANT 0x9c20
#define AR5K_PHY_RFBUS_GRANT_OK 0x00000001
/*
* PHY ADC test register
*/
#define AR5K_PHY_ADC_TEST 0x9c24
#define AR5K_PHY_ADC_TEST_I 0x00000001
#define AR5K_PHY_ADC_TEST_Q 0x00000200
/*
* PHY DAC test register
*/
#define AR5K_PHY_DAC_TEST 0x9c28
#define AR5K_PHY_DAC_TEST_I 0x00000001
#define AR5K_PHY_DAC_TEST_Q 0x00000200
/*
* PHY PTAT register (?)
*/
#define AR5K_PHY_PTAT 0x9c2c
/*
* PHY Illegal TX rate register [5112+]
*/
#define AR5K_PHY_BAD_TX_RATE 0x9c30
/*
* PHY SPUR Power register [5112+]
*/
#define AR5K_PHY_SPUR_PWR 0x9c34 /* Register Address */
#define AR5K_PHY_SPUR_PWR_I 0x00000001 /* SPUR Power estimate for I (field) */
#define AR5K_PHY_SPUR_PWR_Q 0x00000100 /* SPUR Power estimate for Q (field) */
#define AR5K_PHY_SPUR_PWR_FILT 0x00010000 /* Power with SPUR removed (field) */
/*
* PHY Channel status register [5112+] (?)
*/
#define AR5K_PHY_CHAN_STATUS 0x9c38
#define AR5K_PHY_CHAN_STATUS_BT_ACT 0x00000001
#define AR5K_PHY_CHAN_STATUS_RX_CLR_RAW 0x00000002
#define AR5K_PHY_CHAN_STATUS_RX_CLR_MAC 0x00000004
#define AR5K_PHY_CHAN_STATUS_RX_CLR_PAP 0x00000008
/*
* Heavy clip enable register
*/
#define AR5K_PHY_HEAVY_CLIP_ENABLE 0x99e0
/*
* PHY clock sleep registers [5112+]
*/
#define AR5K_PHY_SCLOCK 0x99f0
#define AR5K_PHY_SCLOCK_32MHZ 0x0000000c
#define AR5K_PHY_SDELAY 0x99f4
#define AR5K_PHY_SDELAY_32MHZ 0x000000ff
#define AR5K_PHY_SPENDING 0x99f8
/*
* PHY PAPD I (power?) table (?)
* (92! entries)
*/
#define AR5K_PHY_PAPD_I_BASE 0xa000
#define AR5K_PHY_PAPD_I(_n) (AR5K_PHY_PAPD_I_BASE + ((_n) << 2))
/*
* PHY PCDAC TX power table
*/
#define AR5K_PHY_PCDAC_TXPOWER_BASE 0xa180
#define AR5K_PHY_PCDAC_TXPOWER(_n) (AR5K_PHY_PCDAC_TXPOWER_BASE + ((_n) << 2))
/*
* PHY mode register [5111+]
*/
#define AR5K_PHY_MODE 0x0a200 /* Register Address */
#define AR5K_PHY_MODE_MOD 0x00000001 /* PHY Modulation bit */
#define AR5K_PHY_MODE_MOD_OFDM 0
#define AR5K_PHY_MODE_MOD_CCK 1
#define AR5K_PHY_MODE_FREQ 0x00000002 /* Freq mode bit */
#define AR5K_PHY_MODE_FREQ_5GHZ 0
#define AR5K_PHY_MODE_FREQ_2GHZ 2
#define AR5K_PHY_MODE_MOD_DYN 0x00000004 /* Enable Dynamic OFDM/CCK mode [5112+] */
#define AR5K_PHY_MODE_RAD 0x00000008 /* [5212+] */
#define AR5K_PHY_MODE_RAD_RF5111 0
#define AR5K_PHY_MODE_RAD_RF5112 8
#define AR5K_PHY_MODE_XR 0x00000010 /* Enable XR mode [5112+] */
#define AR5K_PHY_MODE_HALF_RATE 0x00000020 /* Enable Half rate (test) */
#define AR5K_PHY_MODE_QUARTER_RATE 0x00000040 /* Enable Quarter rat (test) */
/*
* PHY CCK transmit control register [5111+ (?)]
*/
#define AR5K_PHY_CCKTXCTL 0xa204
#define AR5K_PHY_CCKTXCTL_WORLD 0x00000000
#define AR5K_PHY_CCKTXCTL_JAPAN 0x00000010
#define AR5K_PHY_CCKTXCTL_SCRAMBLER_DIS 0x00000001
#define AR5K_PHY_CCKTXCTK_DAC_SCALE 0x00000004
/*
* PHY CCK Cross-correlator Barker RSSI threshold register [5212+]
*/
#define AR5K_PHY_CCK_CROSSCORR 0xa208
#define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR 0x0000003f
#define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR_S 0
/* Same address is used for antenna diversity activation */
#define AR5K_PHY_FAST_ANT_DIV 0xa208
#define AR5K_PHY_FAST_ANT_DIV_EN 0x00002000
/*
* PHY 2GHz gain register [5111+]
*/
#define AR5K_PHY_GAIN_2GHZ 0xa20c
#define AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX 0x00fc0000
#define AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX_S 18
#define AR5K_PHY_GAIN_2GHZ_INI_5111 0x6480416c
#define AR5K_PHY_CCK_RX_CTL_4 0xa21c
#define AR5K_PHY_CCK_RX_CTL_4_FREQ_EST_SHORT 0x01f80000
#define AR5K_PHY_CCK_RX_CTL_4_FREQ_EST_SHORT_S 19
#define AR5K_PHY_DAG_CCK_CTL 0xa228
#define AR5K_PHY_DAG_CCK_CTL_EN_RSSI_THR 0x00000200
#define AR5K_PHY_DAG_CCK_CTL_RSSI_THR 0x0001fc00
#define AR5K_PHY_DAG_CCK_CTL_RSSI_THR_S 10
#define AR5K_PHY_FAST_ADC 0xa24c
#define AR5K_PHY_BLUETOOTH 0xa254
/*
* Transmit Power Control register
* [2413+]
*/
#define AR5K_PHY_TPC_RG1 0xa258
#define AR5K_PHY_TPC_RG1_NUM_PD_GAIN 0x0000c000
#define AR5K_PHY_TPC_RG1_NUM_PD_GAIN_S 14
#define AR5K_PHY_TPC_RG1_PDGAIN_1 0x00030000
#define AR5K_PHY_TPC_RG1_PDGAIN_1_S 16
#define AR5K_PHY_TPC_RG1_PDGAIN_2 0x000c0000
#define AR5K_PHY_TPC_RG1_PDGAIN_2_S 18
#define AR5K_PHY_TPC_RG1_PDGAIN_3 0x00300000
#define AR5K_PHY_TPC_RG1_PDGAIN_3_S 20
#define AR5K_PHY_TPC_RG5 0xa26C
#define AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP 0x0000000F
#define AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP_S 0
#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_1 0x000003F0
#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_1_S 4
#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_2 0x0000FC00
#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_2_S 10
#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_3 0x003F0000
#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_3_S 16
#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_4 0x0FC00000
#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_4_S 22
/*
* PHY PDADC Tx power table
*/
#define AR5K_PHY_PDADC_TXPOWER_BASE 0xa280
#define AR5K_PHY_PDADC_TXPOWER(_n) (AR5K_PHY_PDADC_TXPOWER_BASE + ((_n) << 2))