1
0
mirror of https://github.com/rofafor/vdr-plugin-satip.git synced 2023-10-10 13:37:42 +02:00
vdr-plugin-satip/README
2015-02-20 21:15:55 +02:00

152 lines
6.2 KiB
Plaintext

This is an SAT>IP plugin for the Video Disk Recorder (VDR).
Written by: Rolf Ahrenberg
< R o l f . A h r e n b e r g @ s c i . f i >
Project's homepage: http://www.saunalahti.fi/~rahrenbe/vdr/satip/
Latest version available at: http://www.saunalahti.fi/~rahrenbe/vdr/satip/
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License version 2 as
published by the Free Software Foundation.
See the file COPYING for more information.
Requirements:
- Libcurl >= 7.36.0 - the multiprotocol file transfer library with RTSP support
http://curl.haxx.se/libcurl/
- PugiXML - Light-weight, simple and fast XML parser for C++
http://pugixml.org/
or
TinyXML - a simple, small, C++ XML parser
http://www.grinninglizard.com/tinyxml/
- Glibc >= 2.12 - the GNU C library (recvmmsg)
http://www.gnu.org/software/libc/
Description:
This plugin integrates SAT>IP network devices seamlessly into VDR.
You can use any SAT>IP channel like any other normal DVB channel for
live viewing, recording, etc. The plugin also features full section
filtering capabilities which allow for example EIT information to be
extracted from the incoming stream.
Installation:
tar -xzf /put/your/path/here/vdr-satip-X.Y.Z.tgz
make -C satip-X.Y.Z install
Configuration:
The plugin accepts a "--devices" (-d) command-line parameter defaulting
to one. This parameter defines how many simultaneous transponders can
be received, if there are available SAT>IP tuners.
The plugin accepts also a "--server" (-s) command-line parameter, that
can be used to manually configure static SAT>IP servers if autodetection
via UPnP somehow can't be used. The parameter string is a semicolon
separated list of "<ipaddress>|<model>|<description>" entries. The model
consists of a DVB system (DVBS2,DVBT2,DVBT,DVBC) and number of available
frontends separated by a hyphen:
vdr -P 'satip -s <ipaddress>|<model>|<description>;...'
vdr -P 'satip -s 192.168.0.1|DVBS2-2,DVBT2-2|Octo1'
vdr -P 'satip -s 192.168.0.1|DVBS2-4|Octo1;192.168.0.2|DVBT2-4|Octo2'
SAT>IP satellite positions (aka. signal sources) shall be defined via
sources.conf. If the source description begins with a number, it's used
as SAT>IP signal source selection parameter. A special number zero can
be used to disable the source. Otherwise, the default parameter is one:
S19.2E Astra 1KR/1L/1M/2C
=> Signal source = 1
S19.2E 2
=> Signal source = 2
S19.2E 3 Astra 1KR/1L/1M/2C
=> Signal source = 3
S19.2E 0 Astra 1KR/1L/1M/2C
=> Source is disabled
A channel can be assigned into a specific SAT>IP frontend by giving the
identifier number in RID field of a channels.conf entry:
FE = RID % 100
Valid range: 1 ... 99
Setup menu:
- Operating mode = off If you want exclude all SAT>IP devices
low from VDR's device handling, set this
normal option to "off". Otherwise, if you want
high to keep SAT>IP at a low priority when
selecting available devices, set this
option to "low". Similarly, the "high"
value prefers the SAT>IP over the local
DVB cards when selecting available devices.
- Use CI extension = no If you want to use the CI extension found
in some SAT>IP hardware (e.g. Digital
Devices OctopusNet), set this option to
"yes".
- CICAM #<slot> = <system> If you want to assign a CA system into
a specific CI slot, set this option to
a named one. Use "---" for autoselection.
- Enable EPG scanning = yes If you want exclude all SAT>IP devices
from VDR's EIT background scanning, set
this option to "no".
- Disabled sources = none If your SAT>IP servers don't have certain
satellite positions available you can
disable them via this option.
- Disabled filters = none Certain section filters might cause some
unwanted behaviour to VDR such as time
being falsely synchronized etc. This option
allows creation of blacklists of ill-behaving
filters. If this option is set to a non-zero
value, the menu page will contain that many
"Disable filter" options which allow you
to disable the individual section filters.
Valid range: "none" = 0 ... 7
- [Red:Scan] Forces network scanning of SAT>IP hardware.
- [Yellow:Devices] Opens SAT>IP device status menu.
- [Blue:Info] Opens SAT>IP information/statistics menu.
- [Ok] Opens information menu of selected SAT>IP
device.
Information menu:
- [Red:General] Opens the general information page.
- [Green:Pids] Opens the pid statistics page.
- [Yellow:Filters] Opens the section filter statistics page.
- [Blue:Bits/bytes] Toggles between bits and bytes mode.
Notes:
- The stream id "-1" states about unsuccessful tuning. This might be a
result of invalid channel parameters or lack of free SAT>IP tuners.
- If the plugin doesn't detect your SAT>IP network device, make sure
your setup doesn't have firewalled the UDP port 1900.
- Stream decryption requires a separate CAM plugin that works without
direct access to any DVB card devices. Also the integrated CAM slots
in Octopus Net devices are supported.
- Tracing can be set on/off dynamically via command-line switch or
SVDRP command.
- OctopusNet firmware 1.0.40 or greater recommended.
- Inverto OEM firmware 1.17.0.120 or greater recommended.
The firmware 1.16.0.120 can be downloaded and installed
from their webpage: http://www.inverto.tv/support/
An update to a newer firmware should be offered afterwards.
Acknowledgements:
- Big thanks to Digital Devices GmbH for providing the Octopus Net
hardware for development!