This is an SAT>IP plugin for the Video Disk Recorder (VDR).

Written by:                  Rolf Ahrenberg
                             < R o l f . A h r e n b e r g @ s c i . f i >

Project's homepage:          http://www.saunalahti.fi/~rahrenbe/vdr/satip/

Latest version available at: http://www.saunalahti.fi/~rahrenbe/vdr/satip/

This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License version 2 as
published by the Free Software Foundation.
See the file COPYING for more information.

Requirements:

- Libcurl - the multiprotocol file transfer library with RTSP support
  http://curl.haxx.se/libcurl/

- VDR-2.1.4+ for scrambled channels

Description:

This plugin integrates SAT>IP network devices seamlessly into VDR.
You can use any SAT>IP channel like any other normal DVB channel for
live viewing, recording, etc. The plugin also features full section
filtering capabilities which allow for example EIT information to be
extracted from the incoming stream.

Installation:

tar -xzf /put/your/path/here/vdr-satip-X.Y.Z.tgz
make -C satip-X.Y.Z install

Setup menu:

- Enable EPG scanning = yes  If you want exclude all SAT>IP devices 
                             from VDR's EIT background scanning, set
                             this option to "no".
- Disabled filters = none    Certain section filters might cause some
                             unwanted behaviour to VDR such as time
                             being falsely synchronized etc. This option
                             allows creation of  blacklists of ill-behaving
                             filters. If this option is set to a non-zero
                             value, the menu page will contain that many
                             "Disable filter" options which allow you
                             to disable the individual section filters.
                             Valid range: "none" = 0 ... 7
- [Blue:Info]                Opens SAT>IP information/statistics menu.
- [Ok]                       Opens information menu of selected SAT>IP
                             device.

Information menu:

- [Red:General]              Opens the general information page.
- [Green:Pids]               Opens the pid statistics page.
- [Yellow:Filters]           Opens the section filter statistics page.
- [Blue:Bits/bytes]          Toggles between bits and bytes mode.

SAT>IP device menu:

- [Red:Scan]                 Starts the channel scanning sometime in
                             the future.

Configuration:

- Parameters

  Various parameters, depending on whether this is a DVB-S, DVB-S2, DVB-T,
  or DVB-T2 channel. Each parameter consist of a key character, followed by
  an integer number that represents the actual setting of that parameter.
  The valid key characters, their meaning, and allowed values are:

  B  Bandwidth (1712, 5, 6, 7, 8, 10)
  C  Code rate high priority (12, 23, 34, 35, 45, 56, 67, 78, 89, 910)
  G  Guard interval (4, 8, 16, 32, 128, 19128, 19256)
  H  Horizontal polarization
  L  Left circular polarization
  M  Modulation (2, 5, 16, 64, 256)
  N  pilot toNes (0, 1)
  O  rollOff (20, 25, 35)
  P  stream id (0-255)
  Q  t2 system id (0-65535)
  R  Right circular polarization
  S  delivery System (0, 1)
  T  Transmission mode (1, 2, 4, 8, 16, 32)
  V  Vertical polarization
  X  siso/miso mode (0, 1)
  Z  signal source position (1-255)

  Bandwidth: The bandwidth of the channel in MHz (1712 in kHz)
    (DVB-T/DVB-T2)

  Code rate high priority: Forward Error Correction (FEC) of the high
    priority stream (DVB-T/DVB-T2) or the the inner FEC scheme (DVB-S/DVB-S2)
    12 = 1/2, 23 = 2/3, 34 = 3/4, 35 = 3/5, 45 = 4/5, 56 = 5/6,
    67 = 6/7, 78 = 7/8, 89 = 8/9, 910 = 9/10
    (DVB-T/DVB-T2/DVB-S/DVB-S2)

  Guard interval: The guard interval value
    4 = 1/4, 8 = 1/8, 16 = 1/16, 32 = 1/32, 128 = 1/128,
    19128 = 19/128, 19256 = 19/256
    (DVB-T/DVB-T2)

  Modulation: Specifies the modulation/constellation of the channel
    2   = QPSK (DVB-S, DVB-S2, DVB-T, DVB-T2)
    5   = 8PSK (DVB-S, DVB-S2)
    16  = QAM16 (DVB-T, DVB-T2)
    64  = QAM64 (DVB-T, DVB-T2)
    256 = QAM256 (DVB-T2)

  Pilot tones: Specifies pilot tones usage
    0 = off, 1 = on
    (DVB-S2)

  Rolloff: The Nyquist filter rolloff factor
    35 = 0.35, 25 = 0.25, 20 = 0.20
    (DVB-S/DVB-S2)

  Stream id: Physical Layer Pipe (PLP) id (0-255) for DVB-T2 multiplex
    (DVB-T2)

  T2 system id: Unique identifier (0-65535) of the T2 system
    (DVB-T2)

  Transmission mode: Number of DVB-T OFDM carriers
    32 = 32k, 16 = 16k, 8 = 8k, 4 = 4k, 2 = 2k, 1 = 1k
    (DVB-T/DVB-T2)

  Delivery System: The delivery system
    0 = "first generation" (DVB-S/DVB-T)
    1 = "second generation" (DVB-S2/DVB-T2)

  Polarization: Satellite antenna polarization
    H = horizontal, V = vertical
    R = circular right, L = circular left
    (DVB-S/DVB-S2)

  Signal source: Specifies the signal source (satellite) position
    (DVB-S/DVB-S2)

  SISO/MISO: Specifies the Single-Input/Multiple-Input Single-Output mode
    0 = SISO, 1 = MISO
    (DVB-T2)

- Source

  There are two separate signal sources for SAT>IP channels:
    Z = SAT>IP Satellite (DVB-S/DVB-S2)
    Y = SAT>IP Terrestrial (DVB-T/DVB-T2)

- Examples

  MTV3;DVB-T:658000000:B8C23D23G8M64S0T8Y0:T:0:305=2:561=fin@4,562=dut@4:5010;1073=fin,1074=dut:0:49:8438:8193:0
  =>
  MTV3;SAT>IP:658000000:B8C23G8M64S0T8:Y:0:305=2:561=fin@4,562=dut@4:5010;1073=fin,1074=dut:0:49:8438:8193:0

  Das Erste HD;DVB-S2:11494:HC23M5O35S1:S19.2E:22000:5101=27:5102=deu@3,5103=mis@3;5106=deu@106:5104;5105=deu:0:10301:1:1019:0
  =>
  Das Erste HD;SAT>IP:11494:HC23M5O35S1:Z:22000:5101=27:5102=deu@3,5103=mis@3;5106=deu@106:5104;5105=deu:0:10301:1:1019:0

Notes:

- The stream id "-1" states about unsuccessful tuning. This might be a
  result of invalid channel parameters or lack of free SAT>IP tuners.

- SAT>IP specification 1.2 doesn't support DVB-C/DVB-C2 receivers yet.

- If the plugin doesn't detect your SAT>IP network device, make sure
  your setup doesn't have firewalled the UDP port 1900.

Acknowledgements:

- Big thanks to Digital Devices GmbH for providing the Octopus Net
  hardware for development!