vdr-plugin-softhdcuvid/Makefile

382 lines
9.6 KiB
Makefile

#
# Makefile for a Video Disk Recorder plugin
#
# $Id: 2a41981a57e5e83036463c6a08c84b86ed9d2be3 $
# The official name of this plugin.
# This name will be used in the '-P...' option of VDR to load the plugin.
# By default the main source file also carries this name.
### Configuration (edit this for your needs)
# comment out if not needed
# what kind of decoder do we make -
# if VAAPI is enabled the pluginname is softhdvaapi
# if CUVID is enabled the pluginname is softhdcuvid
# if DRM is enabled the pluginname is softhddrm
VAAPI ?= 0
CUVID ?= 0
# if you enable DRM then the plugin will only run without X server
# only valid for VAAPI
DRM ?= 0
# use libplacebo -
# available for all decoders but for DRM you need LIBPLACEBO_GL
LIBPLACEBO ?= 1
LIBPLACEBO_GL ?= 0
# use YADIF deint - only available with cuvid
YADIF = 1
# use gamma correction
#GAMMA ?= 0
CONFIG := -DDEBUG # remove '#' to enable debug output
#--------------------- no more config needed past this point--------------------------------
# sanitize selections --------
ifneq "$(MAKECMDGOALS)" "clean"
ifneq "$(MAKECMDGOALS)" "indent"
ifeq ($(VAAPI),0)
ifeq ($(CUVID),0)
ifeq ($(DRM),0)
$(error Please define a plugin in the Makefile)
exit 1;
endif
endif
endif
ifeq ($(CUVID),1)
ifeq ($(DRM),1)
$(error Mismatch in Plugin selection)
exit 1;
endif
endif
ifeq ($(CUVID),1)
ifeq ($(VAAPI),1)
$(error Mismatch in Plugin selection)
exit 1;
endif
endif
endif # MAKECMDGOALS!=indent
endif # MAKECMDGOALS!=clean
#--------------------------
PLUGIN = softhdcuvid
# support OPENGLOSD always needed
OPENGLOSD=1
# use DMPS
SCREENSAVER=1
OPENGL=1
CONFIG += -DHAVE_GL # needed for mpv libs
#CONFIG += -DSTILL_DEBUG=2 # still picture debug verbose level
CONFIG += -DAV_INFO -DAV_INFO_TIME=3000 # info/debug a/v sync
#CONFIG += -DHAVE_PTHREAD_NAME # supports new pthread_setname_np
#CONFIG += -DNO_TS_AUDIO # disable ts audio parser
#CONFIG += -DUSE_TS_VIDEO # build new ts video parser
CONFIG += -DUSE_MPEG_COMPLETE # support only complete mpeg packets
CONFIG += -DH264_EOS_TRICKSPEED # insert seq end packets for trickspeed
#CONDIF += -DDUMP_TRICKSPEED # dump trickspeed packets
#CONFIG += -DUSE_BITMAP # VDPAU, use bitmap surface for OSD
CONFIG += -DUSE_VDR_SPU # use VDR SPU decoder.
#CONFIG += -DUSE_SOFTLIMIT # (tobe removed) limit the buffer fill
### The version number of this plugin (taken from the main source file):
VERSION = $(shell grep 'static const char \*const VERSION *=' softhdcuvid.cpp | awk '{ print $$7 }' | sed -e 's/[";]//g')
GIT_REV = $(shell git describe --always 2>/dev/null)
### The name of the distribution archive:
### The directory environment:
# Use package data if installed...otherwise assume we're under the VDR source directory:
PKGCFG = $(if $(VDRDIR),$(shell pkg-config --variable=$(1) $(VDRDIR)/vdr.pc),$(shell PKG_CONFIG_PATH="$$PKG_CONFIG_PATH:../../.." pkg-config --variable=$(1) vdr))
LIBDIR = $(call PKGCFG,libdir)
LOCDIR = $(call PKGCFG,locdir)
PLGCFG = $(call PKGCFG,plgcfg)
#
TMPDIR ?= /tmp
### The compiler options:
export CFLAGS = $(call PKGCFG,cflags)
export CXXFLAGS = $(call PKGCFG,cxxflags)
ifeq ($(CFLAGS),)
$(warning CFLAGS not set)
endif
ifeq ($(CXXFLAGS),)
$(warning CXXFLAGS not set)
endif
### The version number of VDR's plugin API:
APIVERSION = $(call PKGCFG,apiversion)
### Allow user defined options to overwrite defaults:
-include $(PLGCFG)
### Parse softhddevice config
ifeq ($(OPENGL),1)
#_CFLAGS += $(shell pkg-config --cflags libva-glx)
#LIBS += $(shell pkg-config --libs libva-glx)
endif
ifeq ($(OPENGLOSD),1)
CONFIG += -DUSE_OPENGLOSD
endif
ifeq ($(OPENGL),1)
CONFIG += -DUSE_GLX
_CFLAGS += $(shell pkg-config --cflags gl glu glew)
#LIBS += $(shell pkg-config --libs glu glew)
_CFLAGS += $(shell pkg-config --cflags freetype2)
LIBS += $(shell pkg-config --libs freetype2)
endif
ifeq ($(VAAPI),1)
CONFIG += -DVAAPI
#LIBPLACEBO=1
PLUGIN = softhdvaapi
endif
ifeq ($(LIBPLACEBO_GL),1)
CONFIG += -DPLACEBO_GL -DPLACEBO
LIBS += -lepoxy
LIBS += -lplacebo
else
LIBS += -lEGL
endif
ifeq ($(LIBPLACEBO),1)
CONFIG += -DPLACEBO
LIBS += -lEGL
LIBS += -lplacebo
endif
ifeq ($(DRM),1)
PLUGIN = softhddrm
CONFIG += -DUSE_DRM -DVAAPI
_CFLAGS += $(shell pkg-config --cflags libdrm)
LIBS += -lgbm -ldrm -lEGL
endif
ifeq ($(CUVID),1)
#CONFIG += -DUSE_PIP # PIP support
CONFIG += -DCUVID # enable CUVID decoder
LIBS += -lEGL -lGL
ifeq ($(YADIF),1)
CONFIG += -DYADIF # Yadif only with CUVID
endif
endif
ifeq ($(GAMMA),1)
CONFIG += -DGAMMA
endif
ARCHIVE = $(PLUGIN)-$(VERSION)
PACKAGE = vdr-$(ARCHIVE)
### The name of the shared object file:
SOFILE = libvdr-$(PLUGIN).so
#
# Test that libswresample is available
#
ifneq (exists, $(shell pkg-config libswresample && echo exists))
$(warning ******************************************************************)
$(warning 'libswresample' not found!)
$(error ******************************************************************)
endif
_CFLAGS += $(shell pkg-config --cflags libswresample)
LIBS += $(shell pkg-config --libs libswresample)
#
# Test and set config for libavutil
#
ifneq (exists, $(shell pkg-config libavutil && echo exists))
$(warning ******************************************************************)
$(warning 'libavutil' not found!)
$(error ******************************************************************)
endif
_CFLAGS += $(shell pkg-config --cflags libavutil)
LIBS += $(shell pkg-config --libs libavutil)
#
# Test and set config for libswscale
#
ifneq (exists, $(shell pkg-config libswscale && echo exists))
$(warning ******************************************************************)
$(warning 'libswscale' not found!)
$(error ******************************************************************)
endif
_CFLAGS += $(shell pkg-config --cflags libswscale)
LIBS += $(shell pkg-config --libs libswscale)
#
# Test and set config for libavcodec
#
ifneq (exists, $(shell pkg-config libavcodec && echo exists))
$(warning ******************************************************************)
$(warning 'libavcodec' not found!)
$(error ******************************************************************)
endif
_CFLAGS += $(shell pkg-config --cflags libavcodec)
LIBS += $(shell pkg-config --libs libavcodec libavfilter)
#
# Test and set config for alsa
#
ifneq (exists, $(shell pkg-config alsa && echo exists))
$(warning ******************************************************************)
$(warning 'alsa' not found!)
$(error ******************************************************************)
endif
_CFLAGS += $(shell pkg-config --cflags alsa)
LIBS += $(shell pkg-config --libs alsa)
ifeq ($(SCREENSAVER),1)
CONFIG += -DUSE_SCREENSAVER
_CFLAGS += $(shell pkg-config --cflags xcb-screensaver xcb-dpms)
LIBS += $(shell pkg-config --libs xcb-screensaver xcb-dpms)
endif
#_CFLAGS += $(shell pkg-config --cflags libavcodec x11 x11-xcb xcb xcb-icccm)
#LIBS += -lrt $(shell pkg-config --libs libavcodec x11 x11-xcb xcb xcb-icccm)
_CFLAGS += $(shell pkg-config --cflags x11 x11-xcb xcb xcb-icccm)
LIBS += -lrt $(shell pkg-config --libs x11 x11-xcb xcb xcb-icccm)
_CFLAGS += -I./opengl -I./
LIBS += -L/usr/lib64
ifeq ($(CUVID),1)
LIBS += -lcuda -lnvcuvid
endif
LIBS += -lGLEW -lGLU -ldl -lglut
### Includes and Defines (add further entries here):
INCLUDES +=
DEFINES += -DPLUGIN_NAME_I18N='"$(PLUGIN)"' -D_GNU_SOURCE $(CONFIG) \
$(if $(GIT_REV), -DGIT_REV='"$(GIT_REV)"')
### Make it standard
override CXXFLAGS += $(_CFLAGS) $(DEFINES) $(INCLUDES) \
-g -W -Wextra -Werror=overloaded-virtual -Wno-unused-parameter
override CFLAGS += $(_CFLAGS) $(DEFINES) $(INCLUDES) \
-g -W -Wextra
### The object files (add further files here):
OBJS = softhdcuvid.o softhddev.o video.o audio.o codec.o ringbuffer.o openglosd.o
ifeq ($(GAMMA),1)
OBJS += colorramp.o
ifeq ($(DRM),1)
OBJS += gamma-drm.o
else
OBJS += gamma-vidmode.o
endif
endif
SRCS = $(wildcard $(OBJS:.o=.c)) *.cpp
### The main target:
all: $(SOFILE) i18n
### Dependencies:
MAKEDEP = $(CXX) -MM -MG
DEPFILE = .dependencies
$(DEPFILE): Makefile
@$(MAKEDEP) $(CXXFLAGS) $(SRCS) > $@
-include $(DEPFILE)
### Internationalization (I18N):
PODIR = po
I18Npo = $(wildcard $(PODIR)/*.po)
I18Nmo = $(addsuffix .mo, $(foreach file, $(I18Npo), $(basename $(file))))
I18Nmsgs = $(addprefix $(DESTDIR)$(LOCDIR)/, $(addsuffix /LC_MESSAGES/vdr-$(PLUGIN).mo, $(notdir $(foreach file, $(I18Npo), $(basename $(file))))))
I18Npot = $(PODIR)/$(PLUGIN).pot
%.mo: %.po
msgfmt -c -o $@ $<
$(I18Npot): $(SRCS)
xgettext -C -cTRANSLATORS --no-wrap --no-location -k -ktr -ktrNOOP \
-k_ -k_N --package-name=vdr-$(PLUGIN) --package-version=$(VERSION) \
--msgid-bugs-address='<see README>' -o $@ `ls $^`
%.po: $(I18Npot)
msgmerge -U --no-wrap --no-location --backup=none -q -N $@ $<
@touch $@
$(I18Nmsgs): $(DESTDIR)$(LOCDIR)/%/LC_MESSAGES/vdr-$(PLUGIN).mo: $(PODIR)/%.mo
install -D -m644 $< $@
.PHONY: i18n
i18n: $(I18Nmo) $(I18Npot)
install-i18n: $(I18Nmsgs)
### Targets:
$(OBJS): Makefile
$(SOFILE): $(OBJS) shaders.h
$(CXX) $(CXXFLAGS) $(LDFLAGS) -shared $(OBJS) $(LIBS) -o $@
install-lib: $(SOFILE)
install -D $^ $(DESTDIR)$(LIBDIR)/$^.$(APIVERSION)
install: install-lib install-i18n
dist: $(I18Npo) clean
@-rm -rf $(TMPDIR)/$(ARCHIVE)
@mkdir $(TMPDIR)/$(ARCHIVE)
@cp -a * $(TMPDIR)/$(ARCHIVE)
@tar czf $(PACKAGE).tgz -C $(TMPDIR) $(ARCHIVE)
@-rm -rf $(TMPDIR)/$(ARCHIVE)
@echo Distribution package created as $(PACKAGE).tgz
clean:
@-rm -f $(PODIR)/*.mo $(PODIR)/*.pot
@-rm -f $(OBJS) $(DEPFILE) *.so *.tgz core* *~
HDRS = $(wildcard *.h)
indent:
for i in $(SRCS) drm.c hdr.c $(HDRS); do \
clang-format -i $$i; \
done
## Private Targets:
video_test: video.c Makefile
$(CC) -DVIDEO_TEST -DVERSION='"$(VERSION)"' $(CFLAGS) $(LDFLAGS) $< \
$(LIBS) -o $@