1
0
mirror of https://github.com/VDR4Arch/vdr.git synced 2023-10-10 13:36:52 +02:00
vdr/diseqc.h

154 lines
5.8 KiB
C
Raw Normal View History

/*
* diseqc.h: DiSEqC handling
*
* See the main source file 'vdr.c' for copyright information and
* how to reach the author.
*
* $Id: diseqc.h 4.1 2017/01/09 15:11:19 kls Exp $
*/
#ifndef __DISEQC_H
#define __DISEQC_H
#include "config.h"
#include "positioner.h"
#include "thread.h"
class cDiseqcPositioner : public cPositioner {
private:
void SendDiseqc(uint8_t *Codes, int NumCodes);
public:
cDiseqcPositioner(void);
virtual void Drive(ePositionerDirection Direction);
virtual void Step(ePositionerDirection Direction, uint Steps = 1);
virtual void Halt(void);
virtual void SetLimit(ePositionerDirection Direction);
virtual void DisableLimits(void);
virtual void EnableLimits(void);
virtual void StorePosition(uint Number);
virtual void RecalcPositions(uint Number);
virtual void GotoPosition(uint Number, int Longitude);
virtual void GotoAngle(int Longitude);
};
class cScr : public cListObject {
private:
int devices;
int channel;
uint userBand;
int pin;
bool used;
public:
cScr(void);
bool Parse(const char *s);
int Devices(void) const { return devices; }
int Channel(void) const { return channel; }
uint UserBand(void) const { return userBand; }
int Pin(void) const { return pin; }
bool Used(void) const { return used; }
void SetUsed(bool Used) { used = Used; }
};
class cScrs : public cConfig<cScr> {
private:
cMutex mutex;
public:
bool Load(const char *FileName, bool AllowComments = false, bool MustExist = false);
cScr *GetUnused(int Device);
};
extern cScrs Scrs;
class cDiseqc : public cListObject {
public:
enum eDiseqcActions {
daNone,
daToneOff,
daToneOn,
daVoltage13,
daVoltage18,
daMiniA,
daMiniB,
daPositionN,
daPositionA,
daScr,
daCodes,
daWait,
};
enum { MaxDiseqcCodes = 6 };
private:
int devices;
int source;
int slof;
char polarization;
int lof;
mutable int position;
mutable int scrBank;
char *commands;
bool parsing;
int SetScrFrequency(int SatFrequency, const cScr *Scr, uint8_t *Codes) const;
int SetScrPin(const cScr *Scr, uint8_t *Codes) const;
const char *Wait(const char *s) const;
const char *GetPosition(const char *s) const;
const char *GetScrBank(const char *s) const;
const char *GetCodes(const char *s, uchar *Codes = NULL, uint8_t *MaxCodes = NULL) const;
public:
cDiseqc(void);
~cDiseqc();
bool Parse(const char *s);
eDiseqcActions Execute(const char **CurrentAction, uchar *Codes, uint8_t *MaxCodes, const cScr *Scr, int *Frequency) const;
///< Parses the DiSEqC commands and returns the appropriate action code
///< with every call. CurrentAction must be the address of a character pointer,
///< which is initialized to NULL. This pointer is used internally while parsing
///< the commands and shall not be modified once Execute() has been called with
///< it. Call Execute() repeatedly (always providing the same CurrentAction pointer)
///< until it returns daNone. After a successful execution of all commands
///< *CurrentAction points to the value 0x00.
///< If the current action consists of sending code bytes to the device, those
///< bytes will be copied into Codes. MaxCodes must be initialized to the maximum
///< number of bytes Codes can handle, and will be set to the actual number of
///< bytes copied to Codes upon return.
///< If this DiSEqC entry requires SCR, the given Scr will be used. This must
///< be a pointer returned from a previous call to cDiseqcs::Get().
///< Frequency must be the frequency the tuner will be tuned to, and will be
///< set to the proper SCR frequency upon return (if SCR is used).
int Devices(void) const { return devices; }
///< Returns an integer where each bit represents one of the system's devices.
///< If a bit is set, this DiSEqC sequence applies to the corresponding device.
int Source(void) const { return source; }
///< Returns the satellite source this DiSEqC sequence applies to.
int Slof(void) const { return slof; }
///< Returns the switch frequency of the LNB this DiSEqC sequence applies to.
char Polarization(void) const { return polarization; }
///< Returns the signal polarization this DiSEqC sequence applies to.
int Lof(void) const { return lof; }
///< Returns the local oscillator frequency of the LNB this DiSEqC sequence applies to.
int Position(void) const { return position; }
///< Indicates which positioning mode to use in order to move the dish to a given
///< satellite position. -1 means "no positioning" (i.e. fixed dish); 0 means the
///< positioner can be moved to any arbitrary satellite position (within its
///< limits); and a positive number means "move the dish to the position stored
///< under the given number".
bool IsScr(void) const { return scrBank >= 0; }
///< Returns true if this DiSEqC sequence uses Satellite Channel Routing.
const char *Commands(void) const { return commands; }
///< Returns a pointer to the actual commands of this DiSEqC sequence.
};
class cDiseqcs : public cConfig<cDiseqc> {
public:
bool Load(const char *FileName, bool AllowComments = false, bool MustExist = false);
const cDiseqc *Get(int Device, int Source, int Frequency, char Polarization, const cScr **Scr) const;
///< Selects a DiSEqC entry suitable for the given Device and tuning parameters.
///< If this DiSEqC entry requires SCR and the given *Scr is NULL
///< a free one will be selected from the Scrs and a pointer to that will
///< be returned in Scr. The caller shall memorize that pointer and reuse it in
///< subsequent calls.
///< Scr may be NULL for checking whether there is any DiSEqC entry for the
///< given transponder.
};
extern cDiseqcs Diseqcs;
#endif //__DISEQC_H