1
0
mirror of https://github.com/VDR4Arch/vdr.git synced 2023-10-10 13:36:52 +02:00
vdr/MANUAL

53 lines
2.1 KiB
Plaintext
Raw Normal View History

Video Disk Recorder User's Manual
---------------------------------
* Selecting a Channel
2000-04-22 13:51:48 +02:00
There are three ways to select a channel:
1. With no On Screen Menu displayed press the "Up" or "Down" key to switch
to the next higher or lower channel.
2. Press the "Menu" button to bring up the On Screen Menu, select "Channels"
and browse through the list with the "Up" and "Down" key; to switch to the
selected channel press "Ok".
2. Directly type in the channel number with the numeric keys ('0'..'9');
if no key is pressed for about half a second, the digits collected so
far will define the channel number.
After switching to a different channel the channel number and name, as well
as the current time are displayed at the top of the screen. This line
automatically goes away after about two seconds, or if any key is pressed.
To bring up the channel display without switching channels you can press
the "Ok" button.
* Instant Recording
You can start recording the current channel by pressing the "Record"
2000-04-24 10:08:12 +02:00
button. This will create a timer event named "instant" that starts
at the current time and records for two hours.
If you want to modify the recording time you need to edit the timer.
Stop instant recording by disabling or deleting the timer.
* Replaying a Recording
All recordings are listed in the "Recordings" menu. Browse through the
list with the "Up" and "Down" button and press "Ok" (or the "Red" button)
to start playback.
* Replay Control
- "Begin" Positions to beginning of the recording and starts playback
from there.
- "Pause" Halts playback at the current frame. Press again to continue
playback.
- "Stop" Stops playback and stores the current position, so that
playback can be resumed later at that point.
- "Search" Runs playback forward or backward at a higher speed. Press
again to resume normal speed.
- "Skip" Skips about 60 seconds forward or backward.
* Programming the Timer
Use the "Timer" menu to maintain your list of timer controlled recordings.