Added support for "Satellite Channel Routing" (SCR) according to EN50607, also known as "JESS"

CONTRIBUTORS

@@ -2984,6 +2984,7 @@ Frank Neumann <fnu@yavdr.org>
  for suggesting to reduce the thread and I/O priority cCuttingThread::Action()
  for reporting a problem with tuning timeouts when using SCR with multiple tuners
  for fixing the German translation of "VDR will shut down in %s minutes"
+ for adding support for "Satellite Channel Routing" (SCR) according to EN50607 ("JESS")
 
 Gerald Dachs <vdr@dachsweb.de>
  for reporting a problem with checking for minimum line length of 21 characters in
@@ -3247,6 +3248,7 @@ Seppo Ingalsuo <seppo.ingalsuo@iki.fi>
 Manfred Völkel <mvoelkel@digitaldevices.de>
  for suggesting to make all bonded devices (except for the master) turn off their LNB
  power completely to avoid problems when receiving vertically polarized transponders
+ for adding support for "Satellite Channel Routing" (SCR) according to EN50607 ("JESS")
 
 Thomas Maass <mase@setho.org>
  for reporting a difference in the internal sequence of actions when pressing the Blue

HISTORY

@@ -8434,3 +8434,5 @@ Video Disk Recorder Revision History
   + The '8' key for testing an edited sequence now always jumps to the next *end*
     mark. This allows for testing edits in recordings that have actually been cut, as
     well as recordings that have not been cut, in case "Skip edited parts" is enabled.
+- Added support for "Satellite Channel Routing" (SCR) according to EN50607, also
+  known as "JESS" (thanks to Manfred Völkel and Frank Neumann).

INSTALL

@@ -391,8 +391,9 @@ access your DiSEqC equipment (see man vdr(5) for details).
 A special form of DiSEqC is used to connect several receivers to one signal
 source using only a single cable. This method, known as "Satellite Channel Routing"
 according to EN50494 (aka "Unicable(TM)", "OLT(TM)", "SatCR", "Single Cable
-Distribution", "Channel Stacking System" or "Single Cable Interface") uses
+Distribution", "Channel Stacking System" or "Single Cable Interface") or
-the file "scr.conf" to specify which SCR channels use which user band frequency.
+EN50607 (aka "JESS") uses the file "scr.conf" to specify which SCR channels
+use which user band frequency.
 
 If DVB-S devices need to be connected to the same satellite cable, but no
 "Satellite Channel Routing" is available, they can be set to be "bonded" in

diseqc.c

@@ -4,7 +4,7 @@
  * See the main source file 'vdr.c' for copyright information and
  * how to reach the author.
  *
- * $Id: diseqc.c 3.3 2013/12/28 11:33:08 kls Exp $
+ * $Id: diseqc.c 3.4 2015/01/26 12:02:14 kls Exp $
  */
 
 #include "diseqc.h"
@@ -164,7 +164,7 @@ bool cScr::Parse(const char *s)
   bool result = false;
   int fields = sscanf(s, "%d %u %d", &channel, &userBand, &pin);
   if (fields == 2 || fields == 3) {
-     if (channel >= 0 && channel < 8) {
+     if (channel >= 0 && channel < 32) {
         result = true;
         if (fields == 3 && (pin < 0 || pin > 255)) {
            esyslog("Error: invalid SCR pin '%d'", pin);
@@ -255,6 +255,17 @@ bool cDiseqc::Parse(const char *s)
 
 uint cDiseqc::SetScrFrequency(uint SatFrequency, const cScr *Scr, uint8_t *Codes) const
 {
+  if ((Codes[0] & 0xF0) == 0x70 ) { // EN50607 aka JESS
+     uint t = SatFrequency == 0 ? 0 : (SatFrequency - 100);
+     if (t < 2048 && Scr->Channel() >= 0 && Scr->Channel() < 32) {
+        Codes[1] = t >> 8 | Scr->Channel() << 3;
+        Codes[2] = t;
+        Codes[3] = (t == 0 ? 0 : scrBank);
+        if (t)
+           return Scr->UserBand();
+        }
+     }
+  else { // EN50494 aka Unicable
      uint t = SatFrequency == 0 ? 0 : (SatFrequency + Scr->UserBand() + 2) / 4 - 350; // '+ 2' together with '/ 4' results in rounding!
      if (t < 1024 && Scr->Channel() >= 0 && Scr->Channel() < 8) {
         Codes[3] = t >> 8 | (t == 0 ? 0 : scrBank << 2) | Scr->Channel() << 5;
@@ -262,11 +273,25 @@ uint cDiseqc::SetScrFrequency(uint SatFrequency, const cScr *Scr, uint8_t *Codes
         if (t)
            return (t + 350) * 4 - SatFrequency;
         }
+     }
+  esyslog("ERROR: invalid SCR channel number %d or frequency %d", Scr->Channel(),SatFrequency);
   return 0;
 }
 
 int cDiseqc::SetScrPin(const cScr *Scr, uint8_t *Codes) const
 {
+  if ((Codes[0] & 0xF0) == 0x70 ) { // EN50607 aka JESS
+     if (Scr->Pin() >= 0 && Scr->Pin() <= 255) {
+        Codes[0] = 0x71;
+        Codes[4] = Scr->Pin();
+        return 5;
+        }
+     else {
+        Codes[0] = 0x70;
+        return 4;
+        }
+     }
+  else { // EN50494 aka Unicable
      if (Scr->Pin() >= 0 && Scr->Pin() <= 255) {
         Codes[2] = 0x5C;
         Codes[5] = Scr->Pin();
@@ -276,6 +301,7 @@ int cDiseqc::SetScrPin(const cScr *Scr, uint8_t *Codes) const
         Codes[2] = 0x5A;
         return 5;
         }
+     }
 }
 
 const char *cDiseqc::Wait(const char *s) const
@@ -319,7 +345,7 @@ const char *cDiseqc::GetScrBank(const char *s) const
   char *p = NULL;
   errno = 0;
   int n = strtol(s, &p, 10);
-  if (!errno && p != s && n >= 0 && n < 8) {
+  if (!errno && p != s && n >= 0 && n < 256) {
      if (parsing) {
         if (scrBank < 0)
            scrBank = n;

diseqc.conf

@@ -82,7 +82,7 @@ S13.0E  99999 H 10600  t V W15 [E0 10 38 F7] W15 B W15 T
 # S19.2E  12110 V 11080 t v
 # S19.2E  99999 V 10720 t v
 #
-# SCR (Satellite Channel Routing):
+# SCR (Satellite Channel Routing) EN50494:
 #
 # S19.2E  11700 V  9750  t V W10 S0 [E0 10 5A 00 00] W10 v
 # S19.2E  99999 V 10600  t V W10 S1 [E0 10 5A 00 00] W10 v
@@ -94,6 +94,28 @@ S13.0E  99999 H 10600  t V W15 [E0 10 38 F7] W15 B W15 T
 # S13.0E  11700 H  9750  t V W10 S6 [E0 10 5A 00 00] W10 v
 # S13.0E  99999 H 10600  t V W10 S7 [E0 10 5A 00 00] W10 v
 #
+# SCR (Satellite Channel Routing) EN50607 "JESS":
+#
+# S19.2E  11700 V  9750  t V W10 S0 [70 00 00 00] W10 v
+# S19.2E  99999 V 10600  t V W10 S1 [70 00 00 00] W10 v
+# S19.2E  11700 H  9750  t V W10 S2 [70 00 00 00] W10 v
+# S19.2E  99999 H 10600  t V W10 S3 [70 00 00 00] W10 v
+#
+# S13.0E  11700 V  9750  t V W10 S4 [70 00 00 00] W10 v
+# S13.0E  99999 V 10600  t V W10 S5 [70 00 00 00] W10 v
+# S13.0E  11700 H  9750  t V W10 S6 [70 00 00 00] W10 v
+# S13.0E  99999 H 10600  t V W10 S7 [70 00 00 00] W10 v
+#
+# S23.0E  11700 V  9750  t V W10 S8 [70 00 00 00] W10 v
+# S23.0E  99999 V 10600  t V W10 S9 [70 00 00 00] W10 v
+# S23.0E  11700 H  9750  t V W10 S10 [70 00 00 00] W10 v
+# S23.0E  99999 H 10600  t V W10 S11 [70 00 00 00] W10 v
+#
+# S28.2E  11700 V  9750  t V W10 S12 [70 00 00 00] W10 v
+# S28.2E  99999 V 10600  t V W10 S13 [70 00 00 00] W10 v
+# S28.2E  11700 H  9750  t V W10 S14 [70 00 00 00] W10 v
+# S28.2E  99999 H 10600  t V W10 S15 [70 00 00 00] W10 v
+#
 # Positioner for steerable dish:
 #
 # S360E  11700 V  9750  t V W20 P W20 t v

scr.conf

@@ -14,11 +14,17 @@
 #
 # Examples:
 
-# 0 1284
+# EN50494 & EN50607 ("JESS")
-# 1 1400
+# 0 974
-# 2 1516
+# 1 1076
-# 3 1632
+# 2 1178
-# 4 1748
+# 3 1280
-# 5 1864
+# 4 1382
-# 6 1980
+# 5 1484
-# 7 2096
+# 6 1586
+# 7 1688
+# EN50607 ("JESS") only
+# 8 1790
+# 9 1892
+# 10 1994
+# 11 2096