Adjusted the Makefile to the dvb-kernel driver on kernel 2.6 and up

This commit is contained in:
Klaus Schmidinger
2005-09-02 14:54:29 +02:00
parent 2ffcc66af2
commit 70bc836e3f
5 changed files with 29 additions and 14 deletions

23
INSTALL
View File

@@ -23,18 +23,21 @@ mode you want.
Compiling and running the program:
----------------------------------
Make sure the files from this package are located in a
directory that is "parallel" to the DVB directory of the
driver source for the Siemens DVB-S PCI card (refer to
http://linuxtv.org/dvb/siemens_dvb.html for more information
about that driver). For example, if the DVB driver was
extracted into the directory /home/kls/vdr/DVB, then this
package should be extracted into /home/kls/vdr/VDR.
VDR requires the Linux-DVB driver header files to compile.
As of kernel 2.6 these are part of the official Linux kernel
distribution, and VDR's Makefile will automatically locate
them. If you are using kernel 2.4 or earlier, you should
install the files from this package in a directory that is
"parallel" to the DVB directory of the driver source (refer to
http://linuxtv.org for more information about that driver).
For example, if the DVB driver was extracted into the directory
/home/kls/vdr/DVB, then this package should be extracted into
/home/kls/vdr/VDR.
If you have the DVB driver source in a different location
you will have to change the definition of DVBDIR in the
Makefile (see the file Make.config.template).
you can rename the file Make.config.template to Make.config and
adjust the definition of DVBDIR in that file.
VDR requires the Linux-DVB card driver version dated 2003-08-23 or higher
VDR requires the Linux-DVB driver version dated 2003-08-23 or higher
to work properly.
After extracting the package, change into the VDR directory