diff --git a/CONTRIBUTORS b/CONTRIBUTORS index 231c1ab1..87cc29e4 100644 --- a/CONTRIBUTORS +++ b/CONTRIBUTORS @@ -1756,6 +1756,7 @@ Marko M for suggesting to ignore k_Repeat when deciding whether the same key has been pressed in string input fields for fixing missing ',' in the Italian and Polish OSD texts + for pointing out that "Menu button closes" should actually be "Menu key closes" Patrick Rother for reporting a bug in defining timers that only differ in the day of week diff --git a/HISTORY b/HISTORY index 55b87257..b143c0fb 100644 --- a/HISTORY +++ b/HISTORY @@ -5115,3 +5115,9 @@ Video Disk Recorder Revision History up at a particular time (thanks to Udo Richter). - The HUP signal now forces a restart of VDR (thanks to Udo Richter). - cThread::EmergencyExit() has been replaced by ShutdownHandler.RequestEmergencyExit(). +- Several references to "button" in a remote control context have been changed + to "key" (based on a report from Marko Mäkelä regarding the "Menu button closes" + text). The "MenuButtonCloses" parameter in 'setup.conf' has therefore been + renamed to "MenuKeyCloses", accordingly. This will result in an "unknown config + parameter: MenuButtonCloses" error message in the log file, so you may want to + remove that entry from your 'setup.conf' file. diff --git a/MANUAL b/MANUAL index 3377fb0d..ce90986c 100644 --- a/MANUAL +++ b/MANUAL @@ -112,7 +112,7 @@ Version 1.4 "Ok" here opens the "Edit timer" menu. Textual options, like channel names or recording file names, can be edited - by pressing the "Right" button (which puts brackets around the current + by pressing the "Right" key (which puts brackets around the current character as in "[R]TL"), selecting the desired character position with "Left" and "Right", and changing the character with the "Up" and "Down" keys. "Ok" then confirms the changes. The "Red" key toggles between @@ -120,7 +120,7 @@ Version 1.4 insert and overwrite mode. The "Yellow" key deletes the current character (or the one to the right of the cursor in insert mode). - The "Red", "Green", "Yellow" and "Blue" buttons have special meanings + The "Red", "Green", "Yellow" and "Blue" keys have special meanings in various menus and are listed at the bottom of the on-screen-display. At any point in the menu system, pressing the "Menu" key again will @@ -137,22 +137,22 @@ Version 1.4 displays detailed information about the selected programme. Pressing "Ok" again (or pressing "Back") gets you back into the "Schedule" menu. - From the "Schedule" menu, the "Green" button opens the "What's on now?" + From the "Schedule" menu, the "Green" key opens the "What's on now?" menu, which displays all programmes that are currently running on all channels that broadcast their programme information on the current transponder, or from channels that have been current lately (VDR stores all information it gathers in an internal list). The more channels you have been switching through lately, the longer this list will be. - The "Yellow" button opens the "What's on next?" menu, which lists all + The "Yellow" key opens the "What's on next?" menu, which lists all programmes that will start next on all channels. - Inside the "What's on now/next?" menus the "Green" button toggles between - the "Now" and "Next" display, and the "Yellow" button takes you to the + Inside the "What's on now/next?" menus the "Green" key toggles between + the "Now" and "Next" display, and the "Yellow" key takes you to the "Schedule" menu of the current channel in the list. - The "Red" button allows you to instantly program a timer to record the - selected programme. After pressing this button, the current event will - be marked with 'T', and the function of the "Red" button will change from + The "Red" key allows you to instantly program a timer to record the + selected programme. After pressing this key, the current event will + be marked with 'T', and the function of the "Red" key will change from "Record" to "Timer". Pressing "Red" on an event marked with 'T' will open the "Edit timer" menu for this timer, where you can make any modifications you may want to apply. Note that the Start and Stop time are offset by the @@ -167,7 +167,7 @@ Version 1.4 directly into the "Edit timer" menu in order to allow the user to make further changes to timer parameters before the actual recording starts. - The "Blue" button can be pressed to switch to the channel with the selected + The "Blue" key can be pressed to switch to the channel with the selected programme. The following markers in these menus give additional information about the @@ -192,14 +192,14 @@ Version 1.4 1. With no On Screen Menu displayed press the "Up" or "Down" key to switch to the next higher or lower channel. - 2. Press the "Menu" button to bring up the On Screen Menu, select "Channels" + 2. Press the "Menu" key to bring up the On Screen Menu, select "Channels" and browse through the list with the "Up" and "Down" key; to switch to the selected channel press "Ok". 3. Directly type in the channel number with the numeric keys ('0'..'9'); if no key is pressed for about one second, the digits collected so far will define the channel number. 4. From the "Now", "Next" and "Event" menus (accessible through the "Schedule" - menu) by pressing the "Blue" button. + menu) by pressing the "Blue" key. Pressing the '0' key in normal viewing mode toggles between the current and the previous channel. A channel is considered "previous" if it has been @@ -210,15 +210,15 @@ Version 1.4 'current/next' information will be displayed below this line. This display automatically goes away after about five seconds, or if any key is pressed. To bring up the channel display without switching channels you can press - the "Ok" button. + the "Ok" key. * Selecting audio tracks If the current channel or recording provides different audio tracks (for - different languages or Dolby Digital), the "Green" button in the "VDR" menu can + different languages or Dolby Digital), the "Green" key in the "VDR" menu can be pressed to bring up the "Audio" menu. Within this menu, the "Up" and "Down" keys can be used to switch between the audio tracks. If your remote control has - a dedicated "Audio" button, the first press of that button brings up the "Audio" + a dedicated "Audio" key, the first press of that key brings up the "Audio" menu, and every further press switches to the next available audio track. The "Left" and "Right" keys can be used to switch between "mono left", "stereo" @@ -242,7 +242,7 @@ Version 1.4 If the 'channels.conf' file contains "group separators" you can switch through these groups by pressing the "Left" and "Right" key while no menu is being displayed. The channel display will show the name of the - group, and if you press the "Ok" button while the group name is being + group, and if you press the "Ok" key while the group name is being displayed, you will switch to the first channel of that group. Channel groups can be whatever you decide them to be. You can either @@ -251,11 +251,11 @@ Version 1.4 * Instant Recording - You can start recording the current channel by pressing the "Red" button + You can start recording the current channel by pressing the "Red" key in the "VDR" menu. This will create a timer event named "@channelname" that starts at the current time and by default records for 3 hours. If you want to modify the recording time you need to edit the timer. - Stop instant recording by pressing the "Menu" button and selecting + Stop instant recording by pressing the "Menu" key and selecting "Stop Recording", or by disabling the timer. The default priority, lifetime and recording time can be defined in the "Setup/Recording" menu. @@ -267,7 +267,7 @@ Version 1.4 "Record") and immediately begin replaying that recording. Replay will be put into "pause" mode, so you can attend to whatever it was that disturbed your live viewing session. Once you're back, simply press the "Up" or "Play" - button and you'll be watching the current channel in time shift mode, right + key and you'll be watching the current channel in time shift mode, right from the point where you left off. The instant recording VDR has started will use the parameters for "Pause priority" and "Pause lifetime" as defined in the "Setup/Recording" menu. Recording time will be the same as for @@ -277,12 +277,12 @@ Version 1.4 * Replaying a Recording All recordings are listed in the "Recordings" menu. Browse through the - list with the "Up" and "Down" button and press "Ok" (or the "Red" button) + list with the "Up" and "Down" key and press "Ok" (or the "Red" key) to start playback. New recordings are marked with an '*'. If the Setup parameter RecordingDirs has been set and there are recordings from repeating timers organized in a subdirectory structure, only the directory is displayed and it can be opened by pressing "Ok" (or the "Red" - button). A directory entry displays the total number of recordings within + key). A directory entry displays the total number of recordings within that directory (and any possible subdirectory thereof) as well as the total number of new recordings (as opposed to a recording's entry, which displays the date and time of the recording). @@ -295,15 +295,15 @@ Version 1.4 the order in which they were broadcast. Playback can be stopped via the "VDR" menu by selecting "Stop replaying", - or by pressing the "Blue" button outside the menu. + or by pressing the "Blue" key outside the menu. A previously stopped playback session can be resumed by pressing the "Blue" - button in the "VDR" menu. + key in the "VDR" menu. * Processing Recordings The configuration file 'reccmds.conf' can be used to define system commands that can be applied to the recording that is currently highlighted in the - "Recordings" menu. The "Red" button in the "Recordings" menu opens the "Recording + "Recordings" menu. The "Red" key in the "Recordings" menu opens the "Recording commands" menu if there are commands defined in the file 'reccmds.conf'. Pressing one of the keys '1'..'9' in the "Recordings" menu executes the corresponding command from 'reccmds.conf' (see also "Executing system commands" below). @@ -322,20 +322,20 @@ Version 1.4 Right Runs playback forward or backward at a higher speed; press again to resume normal speed. If in Pause mode, runs forward or backward at a slower speed; press again to return to pause mode. - Pressing and holding down the button performs the function until - the button is released again. + Pressing and holding down the key performs the function until + the key is released again. If "Multi Speed Mode" has been enabled in the "Setup" menu, the - function of these buttons changes in a way that gives you three + function of these keys changes in a way that gives you three fast and slow speeds, through which you can switch by pressing - the respective button several times. + the respective key several times. - Red Jump to a specific location. Enter the time you want to jump to and then press "Left" or "Right" to jump relative to the current position, "Up" to jump to an absolute position, and "Down" to jump and pause at an absolute position. - Green Yellow Skips about 60 seconds back or forward. - Pressing and holding down the button performs the function until - the button is released again. + Pressing and holding down the key performs the function until + the key is released again. - Ok Brings up the replay progress display, which shows the date, time and title of the recording, a progress bar and the current and total time of the recording. @@ -469,7 +469,7 @@ Version 1.4 First day: The date of the first day when this timer shall start recording (only available for repeating timers). - A timer can also be programmed by pressing the "Red" button on the "Schedule", + A timer can also be programmed by pressing the "Red" key on the "Schedule", "Now", "Next" or "Event" menus. * Parameters in the "Setup" menu @@ -513,7 +513,7 @@ Version 1.4 Info on channel switch = yes Turns the display of the current/next information on or off when switching the channel. The information is - always displayed when pressing the "Ok" button in + always displayed when pressing the "Ok" key in normal viewing mode. Timeout requested channel info = yes @@ -535,10 +535,10 @@ Version 1.4 (first) line of the list directly to the first (last) one. - Menu button closes = no - If set to "yes", pressing the "Menu" button while there is + Menu key closes = no + If set to "yes", pressing the "Menu" key while there is anything displayed on the OSD will close the OSD. If set - to "no", the "Menu" button will open the main menu after + to "no", the "Menu" key will open the main menu after closing a temporary display, like, for instance, the channel display. @@ -607,7 +607,7 @@ Version 1.4 different languages, the preferred languages are checked in the given order to decide which one to take. - Scan The "Red" button in the "Setup/EPG" menu can be used to + Scan The "Red" key in the "Setup/EPG" menu can be used to force an EPG scan on a single DVB card system. If pressed, and the primary DVB device is currently not recording or replaying, it will loop through the transponders once and @@ -711,7 +711,7 @@ Version 1.4 yes = use it (and create subdirectories) Use VPS = 0 Defines whether a timer that is created from an EPG entry - (by pressing the "Record" (red) button in the "Schedules" + (by pressing the "Record" (red) key in the "Schedules" or "What's on now/next?" menu) will automatically use VPS if the event it is created for has a VPS time. @@ -723,7 +723,7 @@ Version 1.4 Mark instant recording = yes Defines whether an "instant recording" (started by - pressing the "Red" button in the "VDR" menu) will be + pressing the "Red" key in the "VDR" menu) will be marked with a '@' character to make it distinguishable from timer recordings in the "Recordings" menu. diff --git a/config.c b/config.c index 399bb21a..e3e870b1 100644 --- a/config.c +++ b/config.c @@ -4,7 +4,7 @@ * See the main source file 'vdr.c' for copyright information and * how to reach the author. * - * $Id: config.c 1.148 2007/02/24 13:29:52 kls Exp $ + * $Id: config.c 1.149 2007/02/25 11:27:24 kls Exp $ */ #include "config.h" @@ -222,7 +222,7 @@ cSetup::cSetup(void) TimeoutRequChInfo = 1; MenuScrollPage = 1; MenuScrollWrap = 0; - MenuButtonCloses = 0; + MenuKeyCloses = 0; MarkInstantRecord = 1; strcpy(NameInstantRecord, "TITLE EPISODE"); InstantRecordTime = 180; @@ -384,7 +384,7 @@ bool cSetup::Parse(const char *Name, const char *Value) else if (!strcasecmp(Name, "TimeoutRequChInfo")) TimeoutRequChInfo = atoi(Value); else if (!strcasecmp(Name, "MenuScrollPage")) MenuScrollPage = atoi(Value); else if (!strcasecmp(Name, "MenuScrollWrap")) MenuScrollWrap = atoi(Value); - else if (!strcasecmp(Name, "MenuButtonCloses")) MenuButtonCloses = atoi(Value); + else if (!strcasecmp(Name, "MenuKeyCloses")) MenuKeyCloses = atoi(Value); else if (!strcasecmp(Name, "MarkInstantRecord")) MarkInstantRecord = atoi(Value); else if (!strcasecmp(Name, "NameInstantRecord")) strn0cpy(NameInstantRecord, Value, MaxFileName); else if (!strcasecmp(Name, "InstantRecordTime")) InstantRecordTime = atoi(Value); @@ -453,7 +453,7 @@ bool cSetup::Save(void) Store("TimeoutRequChInfo", TimeoutRequChInfo); Store("MenuScrollPage", MenuScrollPage); Store("MenuScrollWrap", MenuScrollWrap); - Store("MenuButtonCloses", MenuButtonCloses); + Store("MenuKeyCloses", MenuKeyCloses); Store("MarkInstantRecord", MarkInstantRecord); Store("NameInstantRecord", NameInstantRecord); Store("InstantRecordTime", InstantRecordTime); diff --git a/config.h b/config.h index 5bad37e2..652c64d2 100644 --- a/config.h +++ b/config.h @@ -4,7 +4,7 @@ * See the main source file 'vdr.c' for copyright information and * how to reach the author. * - * $Id: config.h 1.285 2007/02/24 13:23:12 kls Exp $ + * $Id: config.h 1.286 2007/02/25 11:26:53 kls Exp $ */ #ifndef __CONFIG_H @@ -206,7 +206,7 @@ public: int TimeoutRequChInfo; int MenuScrollPage; int MenuScrollWrap; - int MenuButtonCloses; + int MenuKeyCloses; int MarkInstantRecord; char NameInstantRecord[MaxFileName]; int InstantRecordTime; diff --git a/i18n.c b/i18n.c index 293081d0..28071f8d 100644 --- a/i18n.c +++ b/i18n.c @@ -4,7 +4,7 @@ * See the main source file 'vdr.c' for copyright information and * how to reach the author. * - * $Id: i18n.c 1.288 2007/02/25 10:11:26 kls Exp $ + * $Id: i18n.c 1.289 2007/02/25 11:26:29 kls Exp $ * * Translations provided by: * @@ -3546,7 +3546,7 @@ const tI18nPhrase Phrases[] = { "Scroll rundt", "Z konce na zaèátek", }, - { "Setup.OSD$Menu button closes", + { "Setup.OSD$Menu key closes", "Menu-Taste schließt", "Meni gumb zapre meni", "Usare il bottone Menu per chiudere", diff --git a/menu.c b/menu.c index 9674e5eb..c89a3198 100644 --- a/menu.c +++ b/menu.c @@ -4,7 +4,7 @@ * See the main source file 'vdr.c' for copyright information and * how to reach the author. * - * $Id: menu.c 1.448 2007/02/25 09:51:53 kls Exp $ + * $Id: menu.c 1.449 2007/02/25 11:28:09 kls Exp $ */ #include "menu.h" @@ -2207,7 +2207,7 @@ void cMenuSetupOSD::Set(void) Add(new cMenuEditBoolItem(tr("Setup.OSD$Timeout requested channel info"), &data.TimeoutRequChInfo)); Add(new cMenuEditBoolItem(tr("Setup.OSD$Scroll pages"), &data.MenuScrollPage)); Add(new cMenuEditBoolItem(tr("Setup.OSD$Scroll wraps"), &data.MenuScrollWrap)); - Add(new cMenuEditBoolItem(tr("Setup.OSD$Menu button closes"), &data.MenuButtonCloses)); + Add(new cMenuEditBoolItem(tr("Setup.OSD$Menu key closes"), &data.MenuKeyCloses)); Add(new cMenuEditBoolItem(tr("Setup.OSD$Recording directories"), &data.RecordingDirs)); SetCurrent(Get(current)); Display(); diff --git a/vdr.c b/vdr.c index 2254e88a..001a7cb1 100644 --- a/vdr.c +++ b/vdr.c @@ -22,7 +22,7 @@ * * The project's page is at http://www.cadsoft.de/vdr * - * $Id: vdr.c 1.284 2007/02/25 10:56:29 kls Exp $ + * $Id: vdr.c 1.285 2007/02/25 11:27:36 kls Exp $ */ #include @@ -885,7 +885,7 @@ int main(int argc, char *argv[]) else WasOpen = false; } - if (!WasOpen || !WasMenu && !Setup.MenuButtonCloses) + if (!WasOpen || !WasMenu && !Setup.MenuKeyCloses) Menu = new cMenuMain; } break;