Version 0.94

- Implemented automatic shutdown (see INSTALL and MANUAL for details).
- New SVDRP command NEXT to show the next timer event.
- The new remote control key "Power" can be used to turn the VDR machine
  off (this requires the presence of the '-s' option).
- Fixed code for the default "Ok" button on the PC keyboard (was 0x162 on
  the "good old" keyboards (with the F-keys at the left side), while it changed
  to 0x15E on the newer keyboards).
- When a recording is edited, the summary information (if present) is now
  also copied.
- When a recording is running on the primary interface, any attempt to change
  the current channel will now lead to a "Channel locked" message.
- The main program loop now first checks whether any timer recordings are
  finished, before starting a new timer recording. This is important in case
  one timer ends at the same time another timer starts.
- New setup parameter OSDMessageTime to define how long an OSD message shall
  be displayed.
- The "File" parameter of a timer can now contain the '~' character to store
  the recording in a hierarchical directory structure. The '~' character has
  been chosen since the file system's directory delimiter '/' may be part of
  a regular programme name (showing the directory hierarchy in the "Recordings"
  menu will follow later).
- Repeating timers now create recordings that contain the 'Subtitle' information
  from the EPG data in their file name. Typically (on tv stations that care
  about their viewers) this contains the episode title of a series. The
  subtitle is appended to the timer's file name, separated by a '~' character,
  so that it results in all recordings of this timer being collected in a
  common subdirectory. You can disable this with the 'UseSubtitle' parameter
  in the "Setup" menu.
- The summary information is now taken from the EPG data at the actual time of
  recording (no longer at the time the timer is created in the "Schedule" menu).
  If a timer already has summary data, that data will be used. If you have
  repeating timers in your 'timers.conf', you may want to make sure they do
  NOT contain any summary information (that's the last field in the timer
  definitions). Use your favourite text editor to delete that information.
  That way every recording will store the actual summary data at the time of
  the recording.

INSTALL

@@ -98,6 +98,57 @@ call to the VDR program, be sure to NOT use the '-d' option! Otherwise
 VDR will go into 'deamon' mode and the initial program call will return
 immediately!
 
+Automatic shutdown:
+-------------------
+
+If you define a shutdown command via the '-s' command line option, VDR
+will call the given command if there is currently no recording or replay
+active, the user has been inactive for at least MinUserInactivity minutes
+and the next timer event is at least MinEventTimeout minutes in the future
+(see the Setup parameters in MANUAL).
+
+The command given in the '-s' option will be called with two parameters.
+The first one is the time (in UTC) of the next timer event (as a time_t
+type number), and the second one is the number of seconds from the current
+time until the next timer event. Your program can choose which one to use
+for programming some sort of hardware device that makes sure the computer
+will be restarted in time before the next timer event. Your program must
+also initiate the actual shutdown procedure of the computer. After this
+your program should return to VDR. VDR will not automatically exit after
+calling the shutdown program, but will rather continue normally untit it
+receives a SIGTERM when the computer is actually shut down. So in case
+the shutdown fails, or the shutdown program for some reason decides not to
+perform a shutdown, VDR will stay up and running.
+
+If there are currently no timers active, both parameters will be '0'.
+In that case the program shall not set the hardware for automatic restart
+and only perform the system shutdown. A program that uses the second parameter
+to set the hardware for restart must therefore also check whether the first
+parameter is '0'.
+
+Before the shutdown program is called, the user will be prompted to inform
+him that the system is about to shut down. If any remote control key is
+pressed while this prompt is visible, the shutdown will be cancelled (and
+tried again after another MinUserInactivity minutes). The shutdown prompt
+will be displayed for 5 minutes, which should be enough time for the user
+to react.
+
+A sample shell script to be used with the '-s' option might look like this:
+
+#!/bin/sh
+setRTCwakeup $(($1 - 300))
+sudo halt
+
+Here 'setRTCwakeup' would be some program that uses the first parameter
+(which is the absolute time of the next timer event) to set the Real Time
+Clock so that it wakes up the computer 5 minutes (i.e. 300 seconds) before
+that event. The 'sudo halt' command then shuts down the computer.
+You will have to substitute both commands with whatever applies to your
+particular hard- and software environment.
+
+If the '-s' option is present, the VDR machine can be turned off by pressing
+the "Power" key on the remote control.
+
 Command line options:
 ---------------------
 
@@ -239,6 +290,7 @@ The default PC key assignments are:
   Back                      'End' in numeric block
   Red, Green, Yellow, Blue  'F1'..'F4'
   0..9                      '0'..'9' in top row
+  Power                     'P'
 
 If you prefer different key assignments, or if the default doesn't work for
 your keyboard, simply delete the file 'keys-pc.conf' and restart 'vdr' to get