Version 1.1.13

- Added cDevice::DeviceNumber() to get the number of a device, not counting any
  gaps that might be in the index count.
- Fixed fetching the current/next information to handle cases where the duration
  of an event is set wrongly and would last beyond the start time of the next
  event.
- Adapted type names to the new HEAD version of the driver (which the previous
  NEWSTRUCT branch has been merged into). Note that to use this driver version
  you still need to add NEWSTRUCT=1 to the make call when building VDR. You
  need a HEAD version of the LinuxDVB driver dated 2002-10-11 or later to compile
  VDR with NEWSTRUCT=1.
- Fixed radio channels in channels.conf.cable (thanks to Robert Schiele and Uwe
  Scheffler).
- Fixed switching the video format in the Setup/DVB menu (thanks to Uwe Scheffler
  for reporting this one).
- Reactivated full handling of second audio PID (even in 'Transfer Mode').
- Fixed a crash when closing down with remote control plugins (thanks to Oliver
  Endriss helping to debug this one).
- Commands in the file 'commands.conf' can now have a '?' at the end of their
  title, which will result in a confirmation prompt before executing the
  command.
- Changed a few leftover 'new char[...]' to MALLOC(char, ...).
- If a command executed from the "Commands" menu doesn't return any output, the
  OSD will now be closed automatically.
- The SVDRP command PUTE now triggers an immediate write of the 'epg.data' file
  (suggested by Gerhard Steiner).
- The new configuration file 'reccmds.conf' can be used to define commands that
  shall be executed from the "Recordings" menu; see MANUAL and 'man vdr(5)' for
  details (suggested by Gerhard Steiner).

PLUGINS.html

@@ -21,18 +21,18 @@ VDR program and present itself to the user.
 The <i>inside</i> interface provides the plugin code access to VDR's internal data
 structures and allows it to hook itself into specific areas to perform special actions.
 <p>
-<!--X1.1.8--><table width=100%><tr><td bgcolor=#0000AA>&nbsp;</td><td width=100%>
-Important modifications introduced in version 1.1.8 are marked like this.
-<!--X1.1.8--></td></tr></table>
-<!--X1.1.9--><table width=100%><tr><td bgcolor=#00AA00>&nbsp;</td><td width=100%>
+<!--X1.1.9--><table width=100%><tr><td bgcolor=#0000AA>&nbsp;</td><td width=100%>
 Important modifications introduced in version 1.1.9 are marked like this.
 <!--X1.1.9--></td></tr></table>
-<!--X1.1.11--><table width=100%><tr><td bgcolor=#AA0000>&nbsp;</td><td width=100%>
+<!--X1.1.11--><table width=100%><tr><td bgcolor=#00AA00>&nbsp;</td><td width=100%>
 Important modifications introduced in version 1.1.11 are marked like this.
 <!--X1.1.11--></td></tr></table>
-<!--X1.1.12--><table width=100%><tr><td bgcolor=#FF0000>&nbsp;</td><td width=100%>
+<!--X1.1.12--><table width=100%><tr><td bgcolor=#AA0000>&nbsp;</td><td width=100%>
 Important modifications introduced in version 1.1.12 are marked like this.
 <!--X1.1.12--></td></tr></table>
+<!--X1.1.13--><table width=100%><tr><td bgcolor=#FF0000>&nbsp;</td><td width=100%>
+Important modifications introduced in version 1.1.13 are marked like this.
+<!--X1.1.13--></td></tr></table>
 
 <a name="Part I - The Outside Interface"><hr><center><h1>Part I - The Outside Interface</h1></center>
 
@@ -964,6 +964,18 @@ bool DevicePoll(cPoller &amp;Poller, int TimeoutMs = 0);
 </pre></td></tr></table><p>
 
 to determine whether the device is ready for further data.
+<!--X1.1.13--><table width=100%><tr><td bgcolor=#FF0000>&nbsp;</td><td width=100%>
+<p>
+If the player can provide more than a single audio track, it can implement the
+following functions to make them available:
+
+<p><table><tr><td bgcolor=#F0F0F0><pre><br>
+virtual int NumAudioTracks(void) const;
+virtual const char **GetAudioTracks(int *CurrentTrack = NULL);
+virtual void SetAudioTrack(int Index);
+</pre></td></tr></table><p>
+
+<!--X1.1.13--></td></tr></table>
 <p>
 TODO: PlayAudio()???
 <p>
@@ -1182,9 +1194,9 @@ the <tt>cDvbDevice</tt>, which is used to access the DVB PCI cards.
 If the new device can receive, it most likely needs to provide a way of
 selecting which channel it shall tune to:
 
-<!--X1.1.9--><table width=100%><tr><td bgcolor=#00AA00>&nbsp;</td><td width=100%>
+<!--X1.1.9--><table width=100%><tr><td bgcolor=#0000AA>&nbsp;</td><td width=100%>
 <p><table><tr><td bgcolor=#F0F0F0><pre><br>
-<!--X1.1.12--><table width=100%><tr><td bgcolor=#FF0000>&nbsp;</td><td width=100%>
+<!--X1.1.12--><table width=100%><tr><td bgcolor=#AA0000>&nbsp;</td><td width=100%>
 virtual bool ProvidesSource(int Source) const;
 <!--X1.1.12--></td></tr></table>
 virtual bool ProvidesChannel(const cChannel *Channel, int Priority = -1, bool *NeedsDetachReceivers = NULL);
@@ -1195,6 +1207,20 @@ These functions will be called with the desired source or channel and shall retu
 this device can provide the requested source or channel and whether tuning to it was successful,
 repectively.
 <!--X1.1.9--></td></tr></table>
+<!--X1.1.13--><table width=100%><tr><td bgcolor=#FF0000>&nbsp;</td><td width=100%>
+<p>
+<b>Audio selection</b>
+<p>
+If the device can provide more than a single audio track, it can implement the
+following functions to make them available:
+
+<p><table><tr><td bgcolor=#F0F0F0><pre><br>
+virtual int NumAudioTracksDevice(void) const;
+virtual const char **GetAudioTracksDevice(int *CurrentTrack = NULL) const;
+virtual void SetAudioTrackDevice(int Index);
+</pre></td></tr></table><p>
+
+<!--X1.1.13--></td></tr></table>
 <p>
 <b>Recording</b>
 <p>
@@ -1204,7 +1230,7 @@ A device that can be used for recording must implement the functions
 virtual bool SetPid(cPidHandle *Handle, int Type, bool On);
 virtual bool OpenDvr(void);
 virtual void CloseDvr(void);
-<!--X1.1.9--><table width=100%><tr><td bgcolor=#00AA00>&nbsp;</td><td width=100%>
+<!--X1.1.9--><table width=100%><tr><td bgcolor=#0000AA>&nbsp;</td><td width=100%>
 virtual bool GetTSPacket(uchar *&amp;Data);
 <!--X1.1.9--></td></tr></table>
 </pre></td></tr></table><p>
@@ -1250,7 +1276,6 @@ virtual void SetVideoFormat(bool VideoFormat16_9);
 virtual void SetVolumeDevice(int Volume);
 </pre></td></tr></table><p>
 
-<!--X1.1.8--><table width=100%><tr><td bgcolor=#0000AA>&nbsp;</td><td width=100%>
 <p>
 <b>On Screen Display</b>
 <p>
@@ -1266,7 +1291,6 @@ which must return a newly created object of a derived cOsdBase class that
 implements the functions necessary to display OSD information on your device.
 The caller of this function will delete the object as soon as it is no longer
 needed.
-<!--X1.1.8--></td></tr></table>
 
 <p>
 <b>Initializing new devices</b>
@@ -1291,7 +1315,7 @@ shut down (delete) all devices when the program terminates. It is therefore
 important that the devices are created on the heap, using the <tt>new</tt>
 operator!
 
-<!--X1.1.11--><table width=100%><tr><td bgcolor=#AA0000>&nbsp;</td><td width=100%>
+<!--X1.1.11--><table width=100%><tr><td bgcolor=#00AA00>&nbsp;</td><td width=100%>
 <hr><h2>Remote Control</h2>
 
 <center><i><b>The joy of zapping!</b></i></center><p>