Reduced number of remote control keys

BUGS

@@ -1,7 +1,7 @@
 Video Disk Recorder - Known Bugs
 --------------------------------
 
-* Sometimes picture and sound drift apart.
+* Sometimes the picture "jumps" as if a frame is skipped.
   Presumably this is a problem in the card driver or firmware?
 
 * When the on-screen display is activated during recording,

INSTALL

@@ -12,7 +12,7 @@ about that driver). For example, if the DVB driver was
 extracted into the directory /home/kls/vdr/DVB, then this
 package should be extracted into /home/kls/vdr/VDR.
 
-This program requires the card driver version 0.04 or higher
+This program requires the card driver version 0.05 or higher
 to work properly.
 
 After extracting the package, change into the VDR directory
@@ -73,7 +73,9 @@ key after the other so that it can learn the various key codes. You will
 at least need to provide an "Up" and a "Down" key, so that you can switch
 channels. The rest of the key definitions is optional, but the more keys
 you define, the more you will be able to navigate through the menus and
-control recording/replaying.
+control recording/replaying. The program uses only a very small number
+of keys which have multiple meanings in the various modes (see MANUAL
+for a detailed description).
 If the program has been built with "DEBUG_REMOTE=1", it will use the
 key configuration file 'keys-pc.conf', so that you won't loose data
 when switching between normal and debug mode.
@@ -81,19 +83,11 @@ when switching between normal and debug mode.
 The default PC key assignments are:
 
   Up, Down, Left, Right     Crsr keys in numeric block
-  Menu                      '5' in numeric block
+  Menu                      'Home' in numeric block
-  Ok                        Enter
+  Ok                        '5' in numeric block
-  Back                      Backspace
+  Back                      'End' in numeric block
-  0..9                      '0'..'9' in top row
   Red, Green, Yellow, Blue  'F1'..'F4'
-  Record                    'r'
+  0..9                      '0'..'9' in top row
-  Pause                     'p'
-  Stop                      's'
-  Begin                     'B'
-  SearchForward             'f'
-  SearchBack                'b'
-  SkipForward               'PgDn' in numeric block
-  SkipBack                  'PgUp' in numeric block
 
 If you prefer different key assignments, simply delete the file
 'keys-pc.conf' and restart 'vdr' to get into learning mode.

MANUAL

@@ -1,6 +1,28 @@
 Video Disk Recorder User's Manual
 ---------------------------------
 
+* Remote Control Keys
+
+  The following remote control keys are used to control the VDR
+  operation. To keep the number of different keys as small as
+  possible, several keys have different meanings in the various
+  modes:
+
+  Key     Normal      Main       Channels   Timer      Edit/New      Recordings  Replay
+
+  Up      Ch up       Crsr up    Crsr up    Crsr up    Crsr up       Crsr up     Begin
+  Down    Ch down     Crsr down  Crsr down  Crsr down  Crsr down     Crsr down   Pause
+  Left    -           -          -          Disable    Decrement     -           Search back
+  Right   -           -          -          Enable     Increment     -           Search forward
+  Ok      Ch display  Select     Switch     Edit       Accept        Play        Progress disp.
+  Menu    Menu on     Menu off   Menu off   Menu off   Menu off      Menu off    Menu on
+  Back    -           Menu off   Main menu  Main menu  Discard       Main menu   -
+  Red     -           Record     Edit       Edit       -             Play        -
+  Green   -           -          New        New        -             -           Skip -60s
+  Yellow  -           -          Delete     Delete     -             Delete      Skip +60s
+  Blue    -           -          Mark       Mark       -             -           Stop
+  0..9    Ch select   -          -          -          Numeric inp.  -           -
+
 * Navigating through the On Screen Menus
 
   The "Main" menu can be called up with the "Menu" key of your remote
@@ -22,10 +44,10 @@ Video Disk Recorder User's Manual
   keys. "Ok" then confirms the changes.
   
   The "Red", "Green", "Yellow" and "Blue" buttons have special meanings
-  in the various menus and are listed at the bottom of the on-screen-display.
+  in various menus and are listed at the bottom of the on-screen-display.
   
   At any point in the menu system, pressing the "Menu" key again will
-  immediately leave the menu system.
+  immediately leave the menu system (discarding any pending changes).
 
 * Selecting a Channel
 
@@ -48,9 +70,9 @@ Video Disk Recorder User's Manual
 
 * Instant Recording
 
-  You can start recording the current channel by pressing the "Record"
+  You can start recording the current channel by pressing the "Red" button
-  button. This will create a timer event named "@channelname" that starts
+  in the Main menu. This will create a timer event named "@channelname" that
-  at the current time and records for two hours.
+  starts at the current time and records for two hours.
   If you want to modify the recording time you need to edit the timer.
   Stop instant recording by pressing the "Menu" button and selecting
   "Stop Recording", or by disabling the timer.
@@ -61,22 +83,24 @@ Video Disk Recorder User's Manual
   list with the "Up" and "Down" button and press "Ok" (or the "Red" button)
   to start playback.
   Playback can be stopped via the Main menu by selecting "Stop replaying",
-  or by pressing the "Stop" button outside the menu.
+  or by pressing the "Blue" button outside the menu.
 
 * Replay Control
 
   The following keys have the listed meaning in Replay mode:
 
-  - "Begin"   Positions to beginning of the recording and starts playback
+  - Up      Positions to beginning of the recording and starts playback
             from there.
-  - "Pause"   Halts playback at the current position. Press again to continue
+  - Down    Halts playback at the current position. Press again to continue
             playback.
-  - "Stop"    Stops playback and stores the current position, so that
+  - Blue    Stops playback and stores the current position, so that
             playback can be resumed later at that point.
-  - "Search"  Runs playback forward or backward at a higher speed. Press
+  - Left
+    Right   Runs playback forward or backward at a higher speed. Press
             again to resume normal speed.
-  - "Skip"    Skips about 60 seconds forward or backward.
+  - Green
-  - "Ok"      Brings up the replay progress display, which shows the date,
+    Yellow  Skips about 60 seconds back or forward.
+  - Ok      Brings up the replay progress display, which shows the date,
             time and title of the recording, a progress bar and the
             current and total time of the recording.
             Press "Ok" again to turn off the progress display.

TODO

@@ -1,11 +1,8 @@
 TODO list for the Video Disk Recorder project
 ---------------------------------------------
 
-* Make it work with two DVB-S PCI cards to allow simultaneous
+* Implement simultaneous record/replay with a single DVB card once
-  recording of one programme, while replaying another programme
+  the card driver/firmware allows this.
-  (or maybe the same one, but time delayed).
-  Maybe we can do this with only a single card, if the card
-  driver/firmware allows simultaneuos record/playback?
 * Implement "on-disk editing" to allow "cutting out" of certain
   scenes in order to archive them (or, reversely, cut out
   commercial breaks).

config.c

@@ -4,7 +4,7 @@
  * See the main source file 'vdr.c' for copyright information and
  * how to reach the author.
  *
- * $Id: config.c 1.6 2000/05/01 16:29:31 kls Exp $
+ * $Id: config.c 1.7 2000/05/27 14:44:15 kls Exp $
  */
 
 #include "config.h"
@@ -23,6 +23,10 @@ tKey keyTable[] = { // "Up" and "Down" must be the first two keys!
                     { kBack,          "Back",          0 },
                     { kLeft,          "Left",          0 },
                     { kRight,         "Right",         0 },
+                    { kRed,           "Red",           0 },
+                    { kGreen,         "Green",         0 },
+                    { kYellow,        "Yellow",        0 },
+                    { kBlue,          "Blue",          0 },
                     { k0,             "0",             0 },
                     { k1,             "1",             0 },
                     { k2,             "2",             0 },
@@ -33,18 +37,6 @@ tKey keyTable[] = { // "Up" and "Down" must be the first two keys!
                     { k7,             "7",             0 },
                     { k8,             "8",             0 },
                     { k9,             "9",             0 },
-                    { kRed,           "Red",           0 },
-                    { kGreen,         "Green",         0 },
-                    { kYellow,        "Yellow",        0 },
-                    { kBlue,          "Blue",          0 },
-                    { kRecord,        "Record",        0 },
-                    { kPause,         "Pause",         0 },
-                    { kStop,          "Stop",          0 },
-                    { kBegin,         "Begin",         0 },
-                    { kSearchForward, "SearchForward", 0 },
-                    { kSearchBack,    "SearchBack",    0 },
-                    { kSkipForward,   "SkipForward",   0 },
-                    { kSkipBack,      "SkipBack",      0 },
                     { kNone,          "",              0 },
                   };
 

config.h

@@ -4,7 +4,7 @@
  * See the main source file 'vdr.c' for copyright information and
  * how to reach the author.
  *
- * $Id: config.h 1.5 2000/05/01 10:45:17 kls Exp $
+ * $Id: config.h 1.6 2000/05/27 14:43:46 kls Exp $
  */
 
 #ifndef __CONFIG_H
@@ -27,19 +27,11 @@ enum eKeys { // "Up" and "Down" must be the first two keys!
              kBack,
              kLeft,
              kRight,
-             k0, k1, k2, k3, k4, k5, k6, k7, k8, k9,
              kRed,
              kGreen,
              kYellow,
              kBlue,
-             kRecord,
+             k0, k1, k2, k3, k4, k5, k6, k7, k8, k9,
-             kPause,
-             kStop,
-             kBegin,
-             kSearchForward,
-             kSearchBack,
-             kSkipForward,
-             kSkipBack,
              kNone
            };
 

menu.c

@@ -4,7 +4,7 @@
  * See the main source file 'vdr.c' for copyright information and
  * how to reach the author.
  *
- * $Id: menu.c 1.14 2000/05/06 15:43:57 kls Exp $
+ * $Id: menu.c 1.15 2000/05/27 16:10:47 kls Exp $
  */
 
 #include "menu.h"
@@ -1009,6 +1009,7 @@ cMenuMain::cMenuMain(bool Replaying)
         Add(new cOsdItem(buffer, osStopRecord));
         delete buffer;
         }
+  SetHelp("Record");
   Display();
   lastActivity = time(NULL);
 }
@@ -1028,8 +1029,13 @@ eOSState cMenuMain::ProcessKey(eKeys Key)
                              return osEnd;
                              }
                           }
-    default: if (Key == kMenu)
+    default: switch (Key) {
-                state = osEnd;
+               case kMenu: state = osEnd;    break;
+               case kRed:  if (!HasSubMenu())
+                              state = osRecord;
+                           break;
+               default:    break;
+               }
     }
   if (Key != kNone)
      lastActivity = time(NULL);
@@ -1202,15 +1208,15 @@ eOSState cReplayControl::ProcessKey(eKeys Key)
   if (visible)
      shown = dvbApi->ShowProgress(!shown) || shown;
   switch (Key) {
-    case kBegin:         dvbApi->Skip(-INT_MAX); break;
+    case kUp:      dvbApi->Skip(-INT_MAX); break;
-    case kPause:         dvbApi->PauseReplay(); break;
+    case kDown:    dvbApi->PauseReplay(); break;
-    case kStop:          Hide();
+    case kBlue:    Hide();
                    dvbApi->StopReplay();
                    return osEnd;
-    case kSearchBack:    dvbApi->FastRewind(); break;
+    case kLeft:    dvbApi->FastRewind(); break;
-    case kSearchForward: dvbApi->FastForward(); break;
+    case kRight:   dvbApi->FastForward(); break;
-    case kSkipBack:      dvbApi->Skip(-60); break;
+    case kGreen:   dvbApi->Skip(-60); break;
-    case kSkipForward:   dvbApi->Skip(60); break;
+    case kYellow:  dvbApi->Skip(60); break;
     case kMenu:    Hide(); return osMenu; // allow direct switching to menu
     case kOk:      visible ? Hide() : Show(); break;
     default:       return osUnknown;

osd.h

@@ -4,7 +4,7 @@
  * See the main source file 'vdr.c' for copyright information and
  * how to reach the author.
  *
- * $Id: osd.h 1.8 2000/05/01 15:16:00 kls Exp $
+ * $Id: osd.h 1.9 2000/05/27 15:35:41 kls Exp $
  */
 
 #ifndef __OSD_H
@@ -22,6 +22,7 @@ enum eOSState { osUnknown,
                 osChannels,
                 osTimer,
                 osRecordings,
+                osRecord,
                 osReplay,
                 osStopRecord,
                 osStopReplay,

vdr.c

@@ -22,7 +22,7 @@
  *
  * The project's page is at http://www.cadsoft.de/people/kls/vdr
  *
- * $Id: vdr.c 1.18 2000/05/06 15:24:01 kls Exp $
+ * $Id: vdr.c 1.19 2000/05/27 15:38:35 kls Exp $
  */
 
 #include <signal.h>
@@ -107,6 +107,10 @@ int main(int argc, char *argv[])
              case osMenu:   DELETENULL(Menu);
                             Menu = new cMenuMain(ReplayControl);
                             break;
+             case osRecord: DELETENULL(Menu);
+                            if (!cRecordControls::Start())
+                               Interface.Error("No free DVB device to record!");
+                            break;
              case osReplay: DELETENULL(Menu);
                             DELETENULL(ReplayControl);
                             ReplayControl = new cReplayControl;
@@ -142,11 +146,6 @@ int main(int argc, char *argv[])
                                channel->Switch();
                             }
                          break;
-             // Instant Recording:
-             case kRecord: DELETENULL(Menu);
-                           if (!cRecordControls::Start())
-                              Interface.Error("No free DVB device to record!");
-                           break;
              // Menu Control:
              case kMenu: Menu = new cMenuMain(ReplayControl); break;
              // Viewing Control: