Version 0.91

- Fixed displaying colored button texts that are too long.
- Suppressing replay progress display when replaying a DVD.
- Updated channels.conf.cable (thanks to Uwe Scheffler).
- Updated French OSD texts (thanks to Jean-Claude Repetto).
- Improved AC3 decoding when replaying DVDs (thanks to Matjaz Thaler).
- Fixed handling DVB card indexes when using only one card in a multi-card
  system.
- Changed the 'Eject DVD' button text to a simple 'Eject' (the German text
  was too long...).
- Made the font file generation more stable (thanks to Artur Skawina).
- Changed the default value for the "DiSEqC" setup parameter to "off".
- The new command line option '-E' can be used to define where the EPG data
  shall be written to. This is especially useful if VDR runs in a system
  that turns off the video disk when it is not used, and therefore needs
  to write the EPG file to a ramdisk (or turn off writing it alltogether).
  See 'vdr --help' for details.
- Making sure the disk is up and running before starting recording (this
  is important for systems that turn off the video disk when it is not used).
- Added the "Jump" function in replay mode (thanks to Stefan Huelswitt).
  See the description of the "Red" key in MANUAL under "Replay Control" for
  details.
- Fixed displaying editing marks when toggling a mark in "pause" mode.
- If there is no free DVB device to record, the log message will now be given
  only once.
- Made I/O more robust by handling EINTR (thanks to Werner Fink).

INSTALL

@@ -23,6 +23,9 @@ to activate DVD support. VDR then also needs the package 'libdvdread'
 in order to replay DVDs. This package is expected to be located in the
 directory ../DVD (seen from the VDR directory).  Adjust the definition
 of DVDDIR in the Makefile if necessary.
+You can find 'libdvdread' at
+
+  http://www.dtek.chalmers.se/groups/dvd/downloads.html
 
 VDR requires the card driver version 0.9.0 or higher
 to work properly. You need to load the dvb.o module *without* option
@@ -190,6 +193,14 @@ As a starting point you can copy the 'channels.conf' file that comes with the
 VDR archive into your video directory (or into your config directory,
 respectively, in case you have redirected it with the -c option).
 
+Setting up DiSEqC:
+------------------
+
+If you are using a DVB-S card with a satellite equipment that needs to be
+accessed using DiSEqC, you have to go to the "Setup" menu and set the "DiSEqC"
+parameter to "on". Also check the "DiSEqC" parameters for the various channels
+and set them to the necessary values.
+
 Running VDR with DVB-C (cable):
 -------------------------------