3 Commits

Author	SHA1	Message	Date
Klaus Schmidinger	0c96d6b626	Version 1.7.21 ... Original announce message: VDR developer version 1.7.21 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.21.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.20-1.7.21.diff MD5 checksums: 7300bfd997db1a848bd774fefe4aec80 vdr-1.7.21.tar.bz2 c4e745939f31543dd607b97d58fc86be vdr-1.7.20-1.7.21.diff WARNING: ======== This is a developer version. Even though I use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging. This version contains functions to determine the "signal strength" and "signal quality" through cDevice. If you are using a DVB card that contains an stb0899 frontend chip (like the TT-budget S2-3200) you may want to apply the patches from ftp://ftp.tvdr.de/vdr/Developer/Driver-Patches to the LinuxDVB driver source in order to receive useful results from that frontend. From the HISTORY file: - Fixed detecting frames for channels that split frames into several payloads (reported by Derek Kelly). - Now initializing Setup.InitialChannel to an empty string to avoid problems in case there is no setup.conf. - The start time of an edited recording is now set to the time of the first editing mark (thanks to Udo Richter). This obsoletes the CUTTIME patch. - Direct access to the members start, priority, lifetime, and deleted of cRecording as well as to position and comment of cMark is now deprecated. Plugin authors should switch to the new access functions for these members. For now the macro __RECORDING_H_DEPRECATED_DIRECT_MEMBER_ACCESS is defined in recording.h, which exposes these members, so that existing plugins will still compile. Comment out this #define to check whether a particular plugin needs to be modified. This #define may be removed in a future version. - The new functions cRecording::NumFrames() and cRecording::LengthInSeconds() return the number of frames and length (in seconds) of a recording (suggested by Steffen Barszus). - The subtitle PIDs are now stored in the channels.conf file as an extension to the TPID field (thanks to Rolf Ahrenberg). - The new function cDevice::ProvidesEIT() is used to determine whether a device can provide EIT data and will thus be used in cEITScanner::Process() to receive EIT data from the channels it can receive (suggested by Rolf Ahrenberg). Note that by default it is assumed that a device can't provide EIT data, and only the builtin cDvbDevice returns true from this function. - The Audio and Subtitles options are now available through the Green and Yellow keys in the Setup/DVB menu (thanks to Rolf Ahrenberg). This is mainly for remote controls that don't have dedicated keys for these functions. - The SVDRP command HITK now accepts multiple keys (up to 31). - The Recordings menu now displays the length (in hours:minutes) of each recording (thanks to Rolf Ahrenberg). Note that the "new" indicator has been moved from the recording time to the length column. This new format is also used by the SVDRP command LSTR, so in case you have an application that parses the LSTR output, you will need to adjust it to the new format. - The dvbsddevice plugin now supports the new option --outputonly, which disables receiving on SD FF devices and uses the device only for output (thanks to Udo Richter). - Fixed detecting frames on radio channels (reported by Chris Mayo). - Revoked the changes to cFrameDetector that have been introduced in version 1.7.19. Detecting frames in case the Picture Start Code or Access Unit Delimiter extends over TS packet boundaries is now done by locally skipping TS packets in cFrameDetector.	2011-09-04 17:50:17 +02:00
Klaus Schmidinger	bd61fee1e9	Version 1.7.19 ... Original announce message: VDR developer version 1.7.19 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.19.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.18-1.7.19.diff MD5 checksums: 1eb04ecdc2b11ab8641ebfaa2cb93f42 vdr-1.7.19.tar.bz2 db16ce7bb51e0db837ed56ef4744a67e vdr-1.7.18-1.7.19.diff WARNING: ======== This is a developer version. Even though I use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging. This version introduces functions to determine the "signal strength" and "signal quality" through cDevice. If you are using a DVB card that contains an stb0899 frontend chip (like the TT-budget S2-3200) you may want to apply the patches from ftp://ftp.tvdr.de/vdr/Developer/Driver-Patches to the LinuxDVB driver source in order to receive useful results from that frontend. Since apparently the various frontend drivers return different maximum values in their FE_READ_SIGNAL_STRENGTH and FE_READ_SNR functions (some deliver a value in the range 0x0000...0xFFFF, while others return values as "dB/10" or "dBm/10" (the latter with an offset to make the value positive, since the parameter is unsigned), the functions cDvbTuner::GetSignalStrength() and cDvbTuner::GetSignalQuality() use the device's "subsystem ID" to map these values into the range 0...100, which is the normalized return value of these functions. Take a look at these two functions and maybe remove the comment characters from the lines //#define DEBUG_SIGNALSTRENGTH //#define DEBUG_SIGNALQUALITY in dvbdevice.c to get some debug output if your device doesn't return any directly useful values and may have to be added appropriately to the 'switch (subsystemId)' statement. The channel display of the 'sttng' skin uses these values to implement a signal strength/quality display. From the HISTORY file: - Fixed cString's operator=(const char *String) in case the given string is the same as the existing one (thanks to Dirk Leber). - Avoiding a gcc 4.6 compiler error in the skincurses plugin (thanks to Tobias Grimm). - TsGetPayload() now checks if there actually is a payload in the given TS packet (reported by Dirk Leber). - Now sorting the source file names in the call to xgettext, to make sure the results are not dependent on the sequence of the files. Plugin authors may want to change the line containing the xgettext call in their Makefile accordingly by changing "$^" to "`ls $^`". - The primary device is now only avoided for recording if it is an old SD full featured card. This is done through the new function cDevice::AvoidRecording(). - Subtitle PIDs are now also decrypted (thanks to Reinhard Nissl). - Fixed a possible race condition in cDiseqc::Execute() (reported by Marco Göbenich). The return value of cDiseqcs::Get() is now const, so plugin authors may need to adjust their code if they use this function. - The new functions cDevice::SignalStrength() and cDevice::SignalQuality() can be used to determine the signal strength and quality of a given device (thanks to Rolf Ahrenberg for some input on how to use BER and UNC values to generate a "quality" value). - The 'sttng' skin now displays two colored bars at the bottom of the channel display, indicating the strength (upper bar) and quality (lower bar) of the received signal. The number to the left of these bars indicates the actual device the current channel is being received with. - Fixed detecting frames in case the Picture Start Code or Access Unit Delimiter extends over TS packet boundaries (reported by Johan Andersson). In order to fix this, the semantics of cFrameDetector had to be changed a little. See cRecorder::Action() and cIndexFileGenerator::Action() on how to use the new cFrameDetector::NewPayload() function. - The frame detector now only starts collecting PTS values after it has seen the first I-frame, otherwise it might get MaxPtsValues values and stop analyzing even though the incoming data is still garbage (reported by Derek Kelly). - The info file of a recording is now only overwritten with a new fps value if that new value is not the default value (thanks to Derek Kelly for reporting a problem with the fps value being overwritten in case a recording was interrupted and resumed, and the fps value could not be determined after resuming recording). - The initial channel is now stored by the channel ID in the setup.conf file, in order to avoid problems in case channels are reordered or deleted (reported by Lars Bläser). - Added support for "content identifier descriptor" and "default authority descriptor" to 'libsi' (thanks to Dave Pickles).	2011-06-19 18:35:46 +02:00
Klaus Schmidinger	8b9350c091	Version 1.7.18 ... - Changed -O2 to -O3 in Make.config.template (reported by Matti Lehtimäki). - Added a missing 'default' case in cPixmapMemory::DrawEllipse(). - Fixed some direct comparisons of double values. - Fixed detecting frames on channels that broadcast with separate "fields" instead of complete frames. - Made updating the editing marks during replay react faster in case the marks file has just been written (with a patch from Udo Richter). - Fixed horizontal scaling of subtitles (reported by Reinhard Nissl). - Stripped the note "The data returned by this function is only used for informational purposes (if any)" from the description of cDevice::GetVideoSize(). The VideoAspect is now used to properly scale subtitles. - Fixed cUnbufferedFile::Seek() in case it is compiled without USE_FADVISE (thanks to Juergen Lock). - Fixed the Language header of the Serbian translation file (thanks to Ville Skyttä). - Added anti-aliasing when upscaling bitmaps, which improves the display of SD subtitles when replayed on an HD OSD (thanks to Reinhard Nissl for his help in debugging). - Renamed cBitmap::Scale() to Scaled(), because it doesn't modify the bitmap itself, but rather returns a scaled copy. - Fixed the description of cReceiver in PLUGINS.html, regarding detaching a receiver from its device before deleting it (reported by Winfried Köhler). This change in behavior was introduced in version 1.5.7. - Fixed scaling subtitles in case the OSD size is exactly the same as the display size of the subtitles. - Added a missing initialization to sDvbSpuRect (reported by Sergiu Dotenco). - Replaced "%lld" and "%llX" print format specifiers with "PRId64" and "PRIX64" to avoid compiler warnings with gcc 4.5.2 (thanks to Sergiu Dotenco). On a personal note: I find it a step in the totally wrong direction that there have been macros introduced to work around this problem in the first place. There should have been "real" format specifiers defined that address this. These macros are nothing but an ugly workaround. - Added Cancel(3) to ~cTrueColorDemo() in the "osddemo" plugin (thanks to Reinhard Nissl). - Added a missing font deletion in cTrueColorDemo::Action() in the "osddemo" plugin (thanks to Reinhard Nissl). - Fixed a buffer overflow in cFont::Bidi() (thanks to Reinhard Nissl). - Added HD stream content identifiers to vdr.5 (thanks to Christoph Haubrich). - Made cRecordingInfo::Read(FILE *f) private to avoid calls to it from outside cRecordingInfo or cRecording (reported by Mika Laitio). - The dvbhddevice plugin is now part of the VDR distribution archive (thanks to Andreas Regel). - Removed an obsolete local variable in dvbsdffosd.c (thanks to Paul Menzel). - Fixed a possible NULL pointer dereference in osddemo.c (reported by Paul Menzel). - Now using pkg-config to get fribidi, freetype and fontconfig cflags and libs (thanks to Ville Skyttä). - The Makefile now also installs the include files (thanks to Ville Skyttä). - Added handling of "ANSI/SCTE 57" descriptors (thanks too Rolf Ahrenberg). - Avoiding an unecessary call to Recordings.ResetResume() (thanks to Reinhard Nissl).	2011-04-17 17:09:00 +02:00