mirror of
https://github.com/vdr-projects/vdr.git
synced 2025-03-01 10:50:46 +00:00
32 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Klaus Schmidinger
|
5500959f4f |
Version 1.7.28
Original announce message:
VDR developer version 1.7.28 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.28.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.27-1.7.28.diff
MD5 checksums:
3ccff2dcc42d112e23dd64f2c39f02f1 vdr-1.7.28.tar.bz2
7249ead4aca4b24e53d49d11c67e1613 vdr-1.7.27-1.7.28.diff
WARNING:
========
This is a developer version. Even though I use it in my productive
environment. I strongly recommend that you only use it under controlled
conditions and for testing and debugging.
The new default skin "LCARS" displays the signal strengths and qualities of
all devices in its main menu. For devices that have an stb0899 frontend chip
(like the TT-budget S2-3200) retrieving this information from the driver is
rather slow, which results in a sluggish response to user input in the main
menu. To speed this up you may want to apply the patches from
From the HISTORY file:
- Fixed cPixmapMemory::DrawEllipse() for quadrants -1 and -4.
- Fixed getting the maximum short channel name length in case there are no short names
at all (reported by Derek Kelly).
- The new function cDevice::DeviceType() returns a string identifying the type of
the given device.
- Now limiting the number of characters of a channel's (short) name to 16 in the
schedules menus, to keep that column from getting overly wide in case there is
a channel with a very long name that has no short name.
- Fixed EPG scan on systems with only a single DVB device that use software output
(reported by Juergen Lock).
- Skins can now inquire the menu category for which their cSkinDisplayMenu is currently
being used. This can be done either through a call to cSkinDisplayMenu::MenuCategory()
or by reimplementing cSkinDisplayMenu::SetMenuCategory(). This information allows a
skin to use special icons or decorations for the various types of menus in VDR.
- The new setup option "DVB/Standard compliance" can be used to switch between different
variations of the DVB standard (thanks to Rolf Ahrenberg). Currently there is "DVB"
(for the original DVB standard) and "ANSI/SCTE", which is used to properly handle
certain private stream types.
- The disk usage is no longer automatically added to the title of the main and
"Recordings" menus. This has always been a mekeshift solution and it is now up
to the individual skin if, where and how it wants to display this information.
A skin can use the new cVideoDiskUsage class to implement such a display. For
compatibility, the default skins "Classic VDR", "ST:TNG Panels" and "Text mode"
(i.e. curses) have been changed to behave like before. Other skins may want to
display the disk usage in totally different ways.
- A cOsdMenu can now handle skins that display different numbers of items in the
various menu categories.
- OSD and skin are now reinitialized after a plugin setup page has been confirmed,
to have them react immediately in case any change to a plugin's setup parameter
has an effect on the OSD.
- The Timers list is now marked as modified whenever a recording starts or ends.
- Fixed cDevice::StillPicture(), making sure it doesn't call the derived class's
function if no buffer has been allocated (reported by Marcus Roscher).
- Fixed the SVDRP command UPDR, which didn't update the global recordings list
(reported by Lars Hanisch).
- cControl::Control() now has an additional boolean parameter, which can be set to
true to get the current player control even if it is hidden.
- The new functions cControl::GetRecording() and cControl::GetHeader() can be used
to retrieve information about what the current player is playing.
- Fixed a possible high CPU load when pausing replay (thanks to Reinhard Nissl).
- Fixed character comparisons in cSubtitleObject::DecodeCharacterString() (reported
by Reinhard Mantey).
- Renamed the function cString::sprintf(const char *fmt, va_list &ap) to vsprintf(),
because it might inadvertently be called with a 'char *' as the second argument on
some compilers and cause a crash (reported by Sundararaj Reel).
- Removed the "bondedMasterFailed" mechanism from cDvbTuner, because it caused
problems with the EPG scan in case a transponder is not receivable in a setup with
bonded devices (reported by Michael Schneider).
- Making sure setup strings don't contain any newline characters (thanks to Joachim
Wilke).
- The new member function cSkinDisplayReplay::SetRecording() allows a skin to display
more information about the currently played recording.
- Fixed a mismatched 'delete' in cSchedules::SetEpgDataFileName() (thanks to Reinhard
Mantey).
- The DrawText() functions of the OSD now accept the new alignment flag taBorder,
which triggers keeping a proper distance from the edge that taLeft or taRight
aligns to.
- Fixed checking for UTF-8 support in cFont::Bidi() (reported by Torsten Lang).
- If a recording has no info file, the 'title' of the recording's info is now set
to the recording's name.
- cVector::Clear() now reinitializes any previously used members.
- Fixed resetting CAMs (thanks to Marco Skambraks).
- The new function RgbShade() (include osd.h) can be used to generate a brighter or
darker version of a given color.
- The new class cSortedTimers can be used to quickly get a list of all timers, sorted
by their start time.
- The new skin "LCARS" is an enhanced version of the "ST:TNG" skin (which is still
there in its original layout, for those who don't like the LCARS skin, or can't use
it due to OSD limitations). The LCARS skin utilizes the new "menu category" feature
to display additional information on the main menu page. It shows upcoming timers
and the system's devices, as well as which device is recording which timers. The
upper pane of the main menu displays the programme data in live and replay mode,
and a progress bar. An indicator on the right side of the device list shows which
device is currently used for live viewing, and whether it is in transfer mode.
The individual device displays show the device number, the device type, which CAM
(if any ) is currently assigned to the device, and the signal strength and quality.
On the left side of the OSD there is a permanent display of the current date and
time, the disk usage and the system load.
"LCARS" is the new default skin of VDR. It requires at least a 4bpp (16 color) full
screen OSD, but you can still operate it if your OSD can handle only fewer colors
(in which case you may want to switch to the "ST:TNG" or "Classic VDR" skin).
- Finally removed the code marked with __RECORDING_H_DEPRECATED_DIRECT_MEMBER_ACCESS
and LEGACY_CRECEIVER.
- Now making sure that the "small font" is never larger than the "osd font".
- Fixed font handling with fontconfig 2.9.0 or newer (thanks to Joerg Bornkessel).
- Extended the interface to the script that gets called for recordings, so that in
the "edited" case it also provides the name of the original recording (thanks to
Christian Richter).
- Added DeleteEvent() to the EPG handler interface, so that an EPG handler can trigger
deleting of an event (thanks to Christian Kaiser).
- Speeded up opening menus on systems with many (several thousands) of recordings, by
caching the information whether a recording is stored on the video directory file
system within the cRecording data (based on a patch from Torsten Lang).
|
||
|
Klaus Schmidinger
|
5117f35938 |
Version 1.7.26
Original announce message:
VDR developer version 1.7.26 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.26.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.25-1.7.26.diff
MD5 checksums:
eb57398e44935ecb0bfc532bdfead312 vdr-1.7.26.tar.bz2
62e0f39e2c53ec2b5abd3ebb0e00ce3d vdr-1.7.25-1.7.26.diff
WARNING:
========
This is a developer version. Even though I use it in my productive
environment. I strongly recommend that you only use it under controlled
conditions and for testing and debugging.
From the HISTORY file:
- Now checking for NULL in cOsd::AddPixmap() (suggested by Christoph Haubrich).
- Fixed the German translation of "VDR will shut down in %s minutes" (thanks to
Frank Neumann).
- The replay progress display is now turned on whenever a mark is toggled (not
only when one is set).
- Toggling a mark now restarts the timeout of the replay progress display.
- Fixed a possible race condition with the SVDRP commands CLRE and PUTE, where
EPG data from the transponder could be handled even though it shouldn't be
handled for 10 seconds.
- Added some missing member initializations in cBitmap.
- Improved displaying the play mode in the ST:TNG skin.
- Made the ST:TNG skin the default in case the user selected skin is not available.
- Improved displaying signal strength and quality in the ST:TNG skin's channel
display.
- Fixed switching devices to the transponders of VPS recordings in case there
are only bonded devices. The cDevice's "avoid device" mechanism has been replaced
by using "occupied".
- Fixed selecting devices for the EPG scan in case the primary device is bonded
with an other one.
- Removed the calls to EITScanner.UsesDevice(this) from dvb[hs]ddevice.c, because
the code following these calls is only executed if LiveView is true, which is
never the case when the EITScanner switches to a channel.
- Removed the obsolete function cEITScanner::UsesDevice(). If a plugin has used this
function to find out whether a call to its cStatus::ChannelSwitch() function was
due to a live channel switch, it can use that function's new parameter LiveView.
Any plugins that implement cStatus::ChannelSwitch() need to add the parameter
'bool LiveView' to that function.
- Fixed parsing channel data in case the audio pid is 0. On channels that only
broadcast Dolby Digital audio there were sometimes log entries like
"changing pids of channel ... from ... to ..." with no apparent difference
between the old and new set of pids.
- Fixed checking pids in case a channel has only Dolby Digital audio.
- The Green button in the "Edit timer" menu can now be used to toggle between single
shot and repeating timers. This is the same as pressing '0' when the "Day" field
is selected, but it works at any time (and is more obvious).
- Revoked "If the first event in a schedule has a table id of 0x00, any incoming EIT data for
that schedule from the DVB stream will be completely ignored".
- Added a new plugin interface for implementing EPG handlers.
+ A plugin can implement an EPG handler by creating an object derived from
cEpgHandler and implementing the necessary member functions.
+ The special handling of events with table id 0x00 has been dropped.
For backwards compatibility EPG events with table ids lower than 0x4E will
be treated as if they had a table id of 0x4E, and the new plugin 'epgtableid0'
can be used to have them handled like in previous versions.
+ The default table id for a newly created cEvent has been changed to 0xFF,
which is higher than any normal table id that is broadcast in the EIT data.
See PLUGINS.html, section "Electronic Program Guide" for more information.
|
||
|
Klaus Schmidinger
|
5a28d99936 |
Version 1.7.22
Original announce message:
VDR developer version 1.7.22 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.22.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.21-1.7.22.diff
MD5 checksums:
b9c0fe1aac8e653c0d0234bc72c2bb2c vdr-1.7.22.tar.bz2
868bb332342c9a78beda17cc85e0bb93 vdr-1.7.21-1.7.22.diff
WARNING:
========
This is a developer version. Even though I use it in my productive
environment. I strongly recommend that you only use it under controlled
conditions and for testing and debugging.
From the HISTORY file:
- Fixed scaling subtitles in case the primary device's GetVideoSize() function doesn't
return actual values (thanks to Luca Olivetti).
- The DiSEqC codes are now copied in the call to cDiseqc::Execute().
- VDR now supports "Satellite Channel Routing" (SCR) according to EN50494 (based on
the "unicable" patch from Lars Hanisch).
Since "Unicable" is a registered trademark and stands for only one of many
implementations of SCR, the following changes have been made compared to the patch,
which need to be taken into account by people who have set up their system using
the patch:
- The 'U' parameter in the diseqc.conf file has been changed to 'S' ("Scr").
- The configuration file name has been changed from "unicable.conf" to "scr.conf".
- Updated sources.conf (thanks to Arthur Konovalov).
- The SVDRP command LSTC now also accepts channel IDs (thanks to Dominic Evans).
- Fixed handling DVB subtitles and implemented decoding textual DVB subtitles (thanks
to Rolf Ahrenberg).
- Added cap_net_raw to the capabilities that are not dropped (thanks to Dominic Evans).
- Fixed setting the start time of an edited recording (thanks to Christoph Haubrich).
- Temporarily switching free devices to transponders in order to have their running
status updated is now done by marking the devices as "occupied" for a certain
amount of time.
- The new setup options "LNB/Device n connected to sat cable" can be used to define
which DVB-S devices are connected to the same sat cable and are therefore "bonded".
This obsoletes the LNBSHARE patch. Users of the LNBSHARE patch will need to newly
set up their sat devices with the above options.
- Fixed a crash when deleting a recording while cutting it (thanks to Ville Skyttä).
- Fixed several spelling errors (thanks to Ville Skyttä).
- The new SVDRP command UPDR can be used to trigger an update of the list of
recordings (thanks to Lars Hanisch).
- Added generating a pkg-config file to the Makefile (thanks to Ville Skyttä).
- Removed the '.pl' suffix from all scripts (thanks to Ville Skyttä).
- Changed the default location for the LIRC socket to /var/run/lirc/lircd (thanks
to Ville Skyttä).
- Added file name and line number to LOG_ERROR_STR() (thanks to Rolf Ahrenberg).
- Replaced all calls to sleep() with cCondWait::SleepMs() (thanks to Rolf Ahrenberg).
- Fixed a crash with malformed SI data (patch from vdr-portal).
|
||
|
Klaus Schmidinger
|
0c96d6b626 |
Version 1.7.21
Original announce message:
VDR developer version 1.7.21 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.21.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.20-1.7.21.diff
MD5 checksums:
7300bfd997db1a848bd774fefe4aec80 vdr-1.7.21.tar.bz2
c4e745939f31543dd607b97d58fc86be vdr-1.7.20-1.7.21.diff
WARNING:
========
This is a developer version. Even though I use it in my productive
environment. I strongly recommend that you only use it under controlled
conditions and for testing and debugging.
This version contains functions to determine the "signal strength"
and "signal quality" through cDevice. If you are using a DVB card that
contains an stb0899 frontend chip (like the TT-budget S2-3200) you may
want to apply the patches from
ftp://ftp.tvdr.de/vdr/Developer/Driver-Patches
to the LinuxDVB driver source in order to receive useful results from
that frontend.
From the HISTORY file:
- Fixed detecting frames for channels that split frames into several payloads
(reported by Derek Kelly).
- Now initializing Setup.InitialChannel to an empty string to avoid problems in
case there is no setup.conf.
- The start time of an edited recording is now set to the time of the first
editing mark (thanks to Udo Richter).
This obsoletes the CUTTIME patch.
- Direct access to the members start, priority, lifetime, and deleted of cRecording
as well as to position and comment of cMark is now deprecated. Plugin authors
should switch to the new access functions for these members. For now the macro
__RECORDING_H_DEPRECATED_DIRECT_MEMBER_ACCESS is defined in recording.h, which
exposes these members, so that existing plugins will still compile. Comment out
this #define to check whether a particular plugin needs to be modified.
This #define may be removed in a future version.
- The new functions cRecording::NumFrames() and cRecording::LengthInSeconds() return
the number of frames and length (in seconds) of a recording (suggested by Steffen
Barszus).
- The subtitle PIDs are now stored in the channels.conf file as an extension to the
TPID field (thanks to Rolf Ahrenberg).
- The new function cDevice::ProvidesEIT() is used to determine whether a device can
provide EIT data and will thus be used in cEITScanner::Process() to receive EIT
data from the channels it can receive (suggested by Rolf Ahrenberg). Note that by
default it is assumed that a device can't provide EIT data, and only the builtin
cDvbDevice returns true from this function.
- The Audio and Subtitles options are now available through the Green and Yellow
keys in the Setup/DVB menu (thanks to Rolf Ahrenberg). This is mainly for remote
controls that don't have dedicated keys for these functions.
- The SVDRP command HITK now accepts multiple keys (up to 31).
- The Recordings menu now displays the length (in hours:minutes) of each recording
(thanks to Rolf Ahrenberg). Note that the "new" indicator has been moved from the
recording time to the length column. This new format is also used by the SVDRP
command LSTR, so in case you have an application that parses the LSTR output,
you will need to adjust it to the new format.
- The dvbsddevice plugin now supports the new option --outputonly, which disables
receiving on SD FF devices and uses the device only for output (thanks to Udo
Richter).
- Fixed detecting frames on radio channels (reported by Chris Mayo).
- Revoked the changes to cFrameDetector that have been introduced in version 1.7.19.
Detecting frames in case the Picture Start Code or Access Unit Delimiter
extends over TS packet boundaries is now done by locally skipping TS packets
in cFrameDetector.
|
||
|
Klaus Schmidinger
|
7df66b0587 |
Version 1.7.20
Original announce message:
VDR developer version 1.7.20 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.20.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.19-1.7.20.diff
MD5 checksums:
eda2911fff1715ba5b1482b20ad18188 vdr-1.7.20.tar.bz2
a8f5bcaf3294cc9fce87283a618d5ce1 vdr-1.7.19-1.7.20.diff
WARNING:
========
This is a developer version. Even though I use it in my productive
environment. I strongly recommend that you only use it under controlled
conditions and for testing and debugging.
This version contains functions to determine the "signal strength"
and "signal quality" through cDevice. If you are using a DVB card that
contains an stb0899 frontend chip (like the TT-budget S2-3200) you may
want to apply the patches from
ftp://ftp.tvdr.de/vdr/Developer/Driver-Patches
to the LinuxDVB driver source in order to receive useful results from
that frontend.
From the HISTORY file:
- Added some missing 'const' to tChannelID (reported by Sundararaj Reel).
- The isnumber() function now checks the given pointer for NULL (thanks to Holger
Dengler).
- Now checking Setup.InitialChannel for NULL before using it (reported by
Christoph Haubrich).
- cSkins::Message() now blocks calls from background threads (thanks to Michael
Eiler for reporting a crash in such a scenario).
- Fixed the return value of the svdrpsend.pl script in case of an error (thanks to
Jonas Diemer).
- Increased MAXCAIDS to 12 (thanks to Jerome Lacarriere).
- Fixed handling DiSEqC codes (thanks to Mark Hawes for reporting the bug, and
Udo Richter for suggesting the fix).
- Added a mechanism to defer timer handling in case of problems (reported by
Frank Niederwipper).
- Fixed distortions that happened when splitting recording into several files
(was a side effect of "Fixed detecting frames in case the Picture Start Code or
Access Unit Delimiter extends over TS packet boundaries" in version 1.7.19).
cRecorder::Action() now buffers TS packets in case the frame type is
not yet known when a new payload starts. This adds no overhead for channels
that broadcast the frame type within the first TS packet of a payload; it only
kicks in if that information is not in the first TS packet.
- Fixed handling the channelID in cMenuEditChanItem (thanks to Udo Richter).
- cStringList::Sort() can now be called with a boolean parameter that controls
case insensitive sorting (suggested by Sundararaj Reel).
- Now scanning new transponders before old ones, to make sure transponder changes
are recognized (thanks to Reinhard Nissl).
- Implemented static cIndexFile::IndexFileName().
- The length (as number of frames) of a recording's index file can now be determined
by a call to cIndexFile::GetLength() (suggested by Christoph Haubrich).
- Fixed some crashes in subtitle display (thanks to Rolf Ahrenberg).
- Made DELETENULL() thread safe (reported by Rolf Ahrenberg).
- The pic2mpg script of the 'pictures' plugin now generates HD images (thanks to
Andre Weidemann for his support in using convert/ffmpeg). The old SD version is
still available as pic2mpg-sd.
- Added a mutex to protect cOsd::Osds from simultaneous access from different threads
(reported by Rolf Ahrenberg).
- The cutter now sets the 'broken link' flag for MPEG2 TS recordings (thanks to
Oliver Endriss).
- Fixed language code entry for Portuguese.
- The new command line options --filesize (suggested by Marco Göbenich) and --split
can be used together with --edit to set the maximum video file size and turn on
splitting edited files at the editing marks. These options must be given before
--edit to have an effect.
- cTimeMs is no longer initialized to the current time if the value given to the
constructor is negative (avoids the "cTimeMs: using monotonic clock..." log message
before VDR's starting log message).
|
||
|
Klaus Schmidinger
|
5ce592e54a |
Version 1.7.13
- Updated the Italian OSD texts (thanks to Diego Pierotto).
- Changed the position of Sirius 4 to S4.8E in sources.conf (thanks to Alexander Gross).
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Moved the declaration of cMenuCommands to menu.h, so that plugins can use it.
- Added a note to the MANUAL, saying that adding new transponders only works if the
"EPG scan" is active (suggested by Halim Sahim).
- Improved handling frames at the beginning and end of a recording in cDvbPlayer for
devices with large buffers (thanks to Reinhard Nissl).
- Implemented cDeviceHook to allow plugins more control over which device can
provide which transponder (thanks to Reinhard Nissl).
- Implemented cDevice::GetCurrentlyTunedTransponder() (thanks to Reinhard Nissl).
- Moved strictly necessary Makefile options into Make.global, which is included
by all plugins (thanks to Paul Menzel). The Makefiles of existing plugins should be
modified like this:
------------------------------------------------------------
--- PLUGINS/src/hello/Makefile 2009/10/18 14:00:07 2.1
+++ PLUGINS/src/hello/Makefile 2010/02/06 14:50:03 2.2
@@ -18,7 +18,7 @@
### The C++ compiler and options:
CXX ?= g++
-CXXFLAGS ?= -fPIC -g -O2 -Wall -Woverloaded-virtual -Wno-parentheses
+CXXFLAGS ?= -g -O2 -Wall -Woverloaded-virtual -Wno-parentheses
### The directory environment:
@@ -26,6 +26,10 @@
LIBDIR = ../../lib
TMPDIR = /tmp
+### Make sure that necessary options are included:
+
+include $(VDRDIR)/Make.global
+
### Allow user defined options to overwrite defaults:
-include $(VDRDIR)/Make.config
------------------------------------------------------------
- Added device definitions to the diseqc.conf file format, so that certain satellite
positions can be limited to a given list of devices.
This obsoletes the SOURCECAPS patch.
- Keeping subtitles visible when pausing replay (thanks to Rolf Ahrenberg).
- Fixed adding new transponders in case there is only a single channel in the
channel list (reported by Halim Sahin).
- The file name in the "Timers" menu now shows only the base name of the recording
without the folder path (if any). Otherwise with long folder paths the actual
recording name was not visible at all.
- Updated the Romanian OSD texts (thanks to Lucian Muresan).
- Exported some libsi functions (thanks to Lucian Muresan).
- Improved scalability of the default skins.
- Fixed the German translation of "Folder name must not contain '%c'!" (thanks to
Frank Schmirler).
- Updated the Estonian OSD texts (thanks to Arthur Konovalov).
- Plugins can now define new sources. In order to implement this, the following
changes were made:
+ The transponder parameter string is no longer interpreted by cChannel, but rather
stored as is and used only by the respective device. That way plugins can use a
channel's parameter string to store arbitrary data (see vdr.5).
+ The new class cSourceParam can be used by plugins to define new sources, and to
implement OSD items that will be used in the channel editor for editing the source
specific parameters of a channel (see dvbdevice.c for an example of how this is
done for the default DVB devices).
+ Purely numerical values are no longer accepted in the 'source' parameter of a
channel.
This obsoletes the PLUGINPARAM patch.
- Updated the Lithuanian OSD texts (thanks to Valdemaras Pipiras).
- cSafeFile::Close() now flushes the file (suggested by Stephan Austermühle).
- The option "Setup/DVB/Use Dolby Digital" now only controls whether Dolby Digital
tracks appear in the "Audio" menu. Dolby Digital is always recorded.
This obsoletes the DOLBYINREC patch.
|
||
Klaus Schmidinger
|
771986b89f |
Version 1.7.0
- Re-implemented handling of DVB-S2, which first appeared in version 1.5.14, but was revoked in version 1.5.15 in favor of making a stable version 1.6.0. VDR now requires the "multiproto" DVB driver, e.g. from http://jusst.de/hg/multiproto. Note that the channels.conf file now supports additional parameters, so you may want to make sure you have a backup of this file in case you need to go back to the previous version of VDR! - Fixed displaying transponder data when it is modified (thanks to Reinhard Nissl). - Fixed handling the counter in detection of pre 1.3.19 PS data (thanks to Reinhard Nissl). - Improved logging system time changes to avoid problems on slow systems under heavy load (suggested by Helmut Auer). - Now setting the thread name, so that it can be seen in 'top -H' (thanks to Rolf Ahrenberg). - Fixed initializing the timer's flags in the cTimer copy constructor (thanks to Andreas Mair). - Fixed setting the OSD level in the 'osddemo' example (thanks to Wolfgang Rohdewald). - Increased the time between checking the CAM status to 500ms to avoid problems with some CAMs (reported by Arthur Konovalov). |
||
|
Klaus Schmidinger
|
da948a50d2 |
Version 1.3.38
- Fixed handling second audio and Dolby Digital PIDs for encrypted channels
(was broken in version 1.3.37).
- Improved TS/PES conversion to better handle lost TS packets (thanks to
Reinhard Nissl).
- Limited the frequency of log messages from the cRepackers.
- Now using the gettid() syscall to get a thread's pid, so that we get a
useful value on NPTL systems (suggested by Johannes Stezenbach).
- Fixed the RCU remote control handling to avoid problems with NPTL (thanks
to Andreas Share for reporting a lockup with the RCU on NPTL systems).
- When displaying the amount of free disk space, the space consumed by
recordings that have been "deleted" but not yet actually "removed" is now
taken into account (suggested by Christian Vogt).
- Now avoiding unnecessary disk access when checking if there are deleted
recordings that need to be removed (reported by Carsten Koch).
- Fixed handling the DELETEDLIFETIME when removing deleted recordings. Now
a deleted recording is retained at least DELETEDLIFETIME seconds before
actually removing it.
The value of DELETEDLIFETIME has been changed to 300. So after (possibly
inadvertently) deleting a recording, there will be at least 5 minutes
in which it can be recovered (unless a new recording immediately requires
the disk space). The count starts again at 0 every time VDR is started.
- Fixed a possible crash when displaying the "Low disk space!" message from
a background thread (thanks to Christof Steininger).
- Fixed handling OSD areas that have invalid sizes (thanks to Marco Schlüßler).
- Added a mutex to AssertFreeDiskSpace() to make sure calls from foreground
and background threads won't interfere.
- The main menu now dynamically updates its contents in case an instant
recording or replay stops, etc.
- The version number of EPG events is now also stored in the epg.data file
(thanks to Kendy Kutzner).
- EPG events that are no longer in the currently broadcasted data stream are
now automatically deleted.
- Removed an invalid access to Event->schedule in cSchedule::DelEvent().
- Modified cSchedule::Cleanup() (events are always sorted by time).
- Schedules are now cleaned up once every hour (not only at 05:00).
- The "Schedule" and "What's on now/next?" menus are now updated if a timer
is set or modified.
- cTimer no longer has its own 'schedule' member, it rather uses that of the
event it has been set to.
- The "Red" button in the "Schedule", "What's on now/next?" and "Event" menus
now immediately creates a timer for the selected event and marks it with 'T'.
If the event is already marked with 'T', the "Red" button opens the "Edit
timer" menu for that timer.
- Removing deleted recordings is now done in a separate thread.
- Dropped the unused "stop recording on primary interface" stuff.
- Converting a grabbed image to JPEG is now done with the new function
RgbToJpeg() (see tools.h).
- The SVDRP command GRAB now determines the image type (JPEG or PNM) from the
extension (".jpg", ".jpeg" or ".pnm") of the given file name. The explicit
'jpeg' or 'pnm' parameter is still accepted for backward compatibility, but
has no meaning any more.
- The function cDevice::GrabImage() no longer writes the grabbed image to a
file, but rather returns a pointer to the image in memory. The wrapper
function cDevice::GrabImageFile() can be used to write the grabbed image
directly to a file. Plugins that used the old version of cDevice::GrabImage()
need to be adapted to the new interface.
- The new class cBase64Encoder (see tools.h) can be used to encode data in
base64 (thanks to Bob Withers for publishing his Base64 class).
- The SVDRP command GRAB now writes the image data to the SVDRP connection
(encoded in base64) if the given file name consists of only the file
extension (".jpg", ".jpeg" or ".pnm"), or if only "-" is given as file
name (based on a suggestion from Darren Salt).
A simple way of viewing a grabbed image on a remote host is:
svdrpsend.pl -d <hostname> 'grab -' | sed -n -e 's/^216-//p' -e '1ibegin-base64 644 -' -e '$a====' | uudecode | display -
- The new command line option '-g' must be given if the SVDRP command GRAB
shall be allowed to write image files to disk. The parameter to this option
must be the full path name of an existing directory, without any "..", double
'/' or symlinks. By default, or if "-g- is given, grabbing to files is
not allowed any more because of potential security risks.
- Modified the way the SVDRP command GRAB writes the grabbed image to a file
to avoid a security hole (CAN-2005-0071, reported by Javier Fernández-Sanguino
Peña):
+ The file handle is now opened in a way that it won't follow symbolic links
(suggested by Darren Salt).
+ The given file name is now canonicalized, so that it won't contain any
".." or symlinks (suggested by Darren Salt).
+ Grabbing to files is limited to the directory given in the the command
line option '-g'. By default grabbing to files is not allowed any more.
- Updated the Greek OSD texts (thanks to Dimitrios Dimitrakos).
- Changed all "illegal" to "invalid" in error messages (there's nothing "illegal"
in VDR ;-).
- When started as user 'root' VDR now switches to a lesser privileged user id,
keeping the capability to set the system time (based on a patch from Ludwig
Nussel). By default the user id 'vdr' is used, which can be changed through
the new command line option '-u'. Note that for security reasons VDR will no
longer run as user 'root' (unless you explicitly start it with '-u root',
but this is not recommended!). The 'runvdr' script has been changed to
use the '-u' option.
- Changed the API of the functions cStatus::Recording() and cStatus::Replaying(),
so that they can provide the full file name of the recording. Plugins that use
these (or the related cStatus::Msg...() functions) need to be adapted
(suggested by Andreas Brugger).
- The DVB devices now retune (and, if applicable, resend the DiSEqC data) if
the lock is lost (based on a patch from Reinhard Nissl).
- Fixed handling multi byte key sequences in cKbdRemote (based on a patch from
Jürgen Schneider).
- Removed unused variables in skinclassic.c and skinsttng.c (thanks to Marco
Schlüßler).
- Made the static cControl functions thread safe (thanks to Patrick Fischer).
- Fixed initializing pthread_mutexattr_t and pthread_rwlockattr_t to avoid
warnings with g++ 4.1.0 (thanks to Ville Skyttä).
- Fixed incrementing the 'state' variables in the repacker classes in remux.c
to avoid warnings with g++ 4.1.0 (reported by Ville Skyttä).
- The Makefile now reports a summary of failed plugins (thanks to Udo Richter).
- The cTimer constructor can now take an optional cChannel (suggested by
Patrick Fischer).
- Fixed setting the main thread id if VDR is running as a daemon.
- Fixed handling TS packets in cTS2PES (thanks to Reinhard Nissl).
- Added cTimer::SetPriority() to set a timer's priority (suggested by Kendy Kutzner).
- Added cMenuEditStrItem::InEditMode() (suggested by Christian Wieninger).
- Now using FE_READ_STATUS to read the current frontend status (suggested by
Holger Wächtler).
- The "Menu" key now behaves consistently. If there is anything on the OSD, it
is closed when the "Menu" key is pressed, and if there is nothing on the OSD,
the "Menu" key opens the main menu (suggested by Luca Olivetti).
- The new option "Setup/OSD/Timeout requested channel info" can be used to turn
off the automatic timeout of the channel display in case it was invoked by
a press of the "Ok" key (suggested by Thiemo Gehrke).
- A message is now given when an instant recording is started (suggested by
Helmut Auer). Actually the code was already there, just commented out - don't
remember why it wasn't active...
- Removed an obsolete "Summary" text from i18n.c and preceded all key definition
texts with "Key$" to avoid duplicates (reported by Lucian Muresan).
- Preceded all button texts with "Button$".
- Removed obsolete "Eject", "Language" and "scanning recordings..." texts.
- Added missing #include "thread.h" to dvbspu.c (reported by Gavin Hamill).
- Disabled the use of "fadvise" in cUnbufferedFile because there have been
several reports that it causes more problems than it solves (suggested by
Petri Hintukainen). If you want to use "fadvise", you can activate the line
//#define USE_FADVISE
in tools.c.
- Removed unused 'offset' member from cOsdItem.
- In the "Channels" menu the numeric keys now position the cursor to the channel
with the given number (see MANUAL, section "Remote Control Keys", note (3) for
details).
- The "Mark/Move" function in the "Channels" menu now also works in the non-numeric
sort modes.
- The default cOsdObject::Show() now automatically calls cOsdMenu::Display() if
this is a menu.
- The new "Info" key brings up information on the currently viewed programme
or recording. For a live programme this is the same as "Schedule/Ok", i.e. the
description of the current EPG event. For a recording this is the same as shown
by the "Info" button in the "Recordings" menu. Plugins that implement players
can overwrite their cControl::GetInfo() function to show their own info (see
PLUGINS.html for details). Pressing the "Info" key again while the info is
displayed will close the OSD. In order to assign this new key to an existing
remote control setup, the remote.conf file needs to be deleted and VDR has
to be restarted to go through the process of learning the remote control keys.
- Any cReceivers still attached to a cDevice when that device switches to a
different transponder are now automatically detached (suggested by Patrick
Fischer).
- The "flags" of a timer are now handled as an unsigned integer value. In order
to do this, the interface of cMenuEditBitItem also had to be changed.
- In string entry fields (like, e.g., the file name of a recording) the characters
can now be entered by pressing the numeric keys, the same way as on a
telephone keypad (based on the "Easy Input" patch from Marcel Schaeben).
- Fixed the "Day" field of the "Edit timer" menu when pressing '0' to switch
from "single shot" to "weekly", followed by the "Right" key (reported by
Andreas Böttger).
- The file 'ca.conf' is obsolete and has been removed.
- Revised all descriptions regarding CICAM.
- Adapted c(Dvb)Device::ProvidesCa() to the dynamic CA handling.
- Added a mutex to synchronize cDevice::PlayPesPacket() and SetCurrentAudioTrack()
(thanks to Reinhard Nissl).
- Added a SleepMs() in cRecorder::Action() to avoid a busy loop (thanks to Ingo
Schneider).
- Cleaned up some trailing white space.
|
||
|
Klaus Schmidinger
|
812ab9018c |
Version 1.3.36
- Fixed a NULL pointer access with the cUnbufferedFile when a replay session runs all the way until the end of the recording (thanks to Joachim Wilke). - A menu is no longer automatically closed when a replay ends (reported by Marko Mäkelä). - Removed '\n' from several syslog() calls (reported by Sascha Volkenandt). - Fixed missing '&' in the SetAreas() example in PLUGINS.html (reported by Sascha Volkenandt). - Fixed a memory leak in cString::operator=() (reported by Sascha Volkenandt). - Updated the Dutch OSD texts (thanks to Maarten Wisse). - cReadLine now dynamically allocates its buffer, so that it can handle lines of any length. - Changed cConfig::Load() to use cReadLine instead of a fixed buffer (thanks to Andreas Mair for reporting a problem with extremely long summary fields in timers). - cSVDRP now dynamically allocates its command buffer in order to handle commands of any length. The MAXPARSEBUFFER macro is now obsolete and has been removed. If a plugin has used that macro, it should either define a buffer size of its own, or use cReadLine when reading files. - Fixed a race condition in the SPU decoder (thanks to Marco Schlüßler). - The EPG scan no longer disturbs players that have also set live PIDs (reported by Stefan Huelswitt). - Fixed setting the help key display in the Recordings menu in case of several layers of subdirectories. - Removed EPG bugfix #0, because it removed actually important data. |
||
|
Klaus Schmidinger
|
ad40eaa28e |
Version 1.3.31
- Added missing German OSD texts for 'Audio language'. - The Setup/CICAM menu now only contains the devices that actually have a CI and dynamically detects the number of slots a CI provides. - Implemented cAudioRepacker for better handling of audio PES packets (thanks to Reinhard Nissl). - Modified handling of audio packets for radio channels in remux.c (thanks to Reinhard Nissl). - Updated the Danish OSD texts (thanks to Mogens Elneff). - Fixed the EPG scan, so that it doesn't use the primary device if that is currently in Transfer-Mode from itself (thanks to Marcus Hilbrich for a bug report that lead to this). - Removed the TUNER_LOCK_TIMEOUT in cDevice::AttachReceiver() since it caused more trouble than it fixed. - Fixed detecting short channel names for "Kabel Deutschland", who uses a comma as delimiter (thanks to Marco Schlüßler). - Moved cMenuEditTimer and cMenuEvent to menu.h so that plugins can use it (suggested by Thomas Günther). - The new static function cString::sprintf() can be used to easily create a formatted string. - Plugins can now implement their own SVDRP commands (based on a patch from Hardy Flor). See PLUGINS.html, section "SVDRP commands" for details. The SVDRP commands of a plugin are accessed through the new SVDRP command PLUG. See PLUGINS/src/svdrpdemo for an example of how to use this feature. - The new SVDRP command PLAY can be used to start replaying a recording (thanks to Hardy Flor). - The new SVDRP command EDIT can be used to start the editing process of a recording (based on the CUTR patch by Harald Milz). |
||
|
Klaus Schmidinger
|
4c5de28883 |
Version 1.3.28
- Added a sleep in cDvbPlayer::Action() in case there is no data to send to the device, which avoids a busy loop on very fast machines (thanks to Martin Wache). - Modified the description of cDevice::Poll() to avoid misunderstandings. - Updated Croatian language texts (thanks to Drazen Dupor). - cDvbPlayer::Goto() now appends a Sequence End Code to get the image shown immediately with softdevices (thanks to Reinhard Nissl). - Reactivated cVideoRepacker in remux.c after some fixes (thanks to Reinhard Nissl). - Removed the fix for handling VPS timers, so that they only record if the event they are assigned to actually has the given VPS time. This has caused repeating VPS timers to stop recording prematurely. - Avoiding duplicate components in EPG events when reading epg.data or in the PUTE SVDRP command (thanks to Olaf Titz for reporting this one). - Added the command line options '--lirc', '--rcu' and '--no-kbd' to allow setting the remote control at runtime (based on a patch by Darren Salt). - Now checking whether timers or channels are currently being edited via the menu before making changes through SVDRP (thanks to Andreas Brugger for reporting a problem with this). - Files and directories are now created with rights according to the shell's umask settings (thanks to Andreas Brachold). - Fixed the cChannel copy constructor (thanks to Marcel Wiesweg for pointing out a problem with it). - Fixed an out-of-bounds memory access with audio language ids (thanks to Matthias Lenk for reporting, and Udo Richter for suggesting a fix). - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Added missing storing of the MenuScrollPage parameter (thanks to Frank Krömmelbein). - Added cRemux::SetTimeouts() for better use of cRemux in a single thread (thanks to Udo Richter for reporting a problem with this). - Modified cEITScanner::Process() so that it uses the primary device if it is replaying and is the only device that provides the given transponder, and that a forced EPG scan works even if EPG scan timeout is set to 0 (thanks to Bernhard Stegmaier for reporting a problem with this). - Fixed cDvbSpuBitmap::putPixel() (thanks to Reinhard Nissl). - Fixed setting system time to avoid time jumps in case of faulty data (thanks to Andreas Böttger). - Fixed a memory leak in the SVDRP command LSTE (thanks to Stefan Huelswitt). |
||
|
Klaus Schmidinger
|
a616d4b859 |
Version 1.3.26
- Updated the Estonian OSD texts (thanks to Arthur Konovalov). - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Fixed handling 'summary.vdr' files with more than two empty lines (thanks to Christian Jacobsen for reporting this one). - Improved resetting CAM connections (thanks to Marco Schlüßler). - Implemented cVideoRepacker in remux.c to make sure every PES packet contains only data from one frame (thanks to Reinhard Nissl). NOTE: currently this doesn't work with MPEG1, so if you use MPEG1 you may want to change line 1158 in remux.c to ts2pes[numTracks++] = new cTS2PES(VPid, resultBuffer, IPACKS); as it was before. - EPG events without a title now display "No title" instead of "(null)" (thanks to Rolf Ahrenberg). - A device can now detach all receivers for a given PID, as is necessary, e.g., for the bitstreamout plugin (thanks to Werner Fink). - Added the year (two digits) to recording dates in LSTR, and thus also in menus (suggested by Jan Ekholm). - Fixed the call to Channels.Unlock() in cEITScanner::Process() (thanks to Reinhard Nissl). - Fixed handling timers with a day given as MTWTF--@6, i.e. a repeating timer with first day not as full date, but just day of month (thanks to Henrik Niehaus for reporting this one). - Removed an unnecessary #include from osd.c (thanks to Wolfgang Rohdewald). - Fixed dropping EPG events that have a zero start time or duration, in case it's an NVOD event (thanks to Chris Warren). - Fixed handling page up/down in menu lists in case there are several non selectable items in a row (thanks to Udo Richter for reporting this one). - Added cOsdMenu::SetCols() to allow adjusting the menu columns. - Modified cEITScanner::Process() so that it works on systems with only budget cards or a mix of DVB-S, DVB-C or DVB-T cards. |
||
|
Klaus Schmidinger
|
c23522ade2 |
Version 1.3.24
- Now including the optional user defined Make.config from the 'libsi' Makefile (thanks to Ville Skyttä). - Updated the Danish OSD texts (thanks to Mogens Elneff). - Fixed a memory leak in tComponent (thanks to Stefan Huelswitt and Daniel Thompson). - Fixed a memory leak in cDvbPlayer (thanks to Stefan Huelswitt). - Added missing text internationalization for "Starting EPG scan" (thanks to Matthias Lötzke). - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Fixed handling transparent areas in cDvbSpuBitmap (thanks to Marco Schlüßler). - Now also considering the "EPG linger time" when saving the EPG data to file or listing it via LSTE (thanks to Roman Krenický). - Fixed handling fragments of less than 4 byte in cPesAssembler (thanks to Reinhard Nissl). - Fixed a bug in libsi's SubtitlingDescriptor::getLength() (thanks to Marco Schlüßler). - When reading the channels.conf file, duplicate channels (i.e. ones that have the same channel ID) are now automatically deleted and only the first one is actually stored. - Fixed handling lifetime when deciding whether to delete a recording (thanks to Udo Richter). - Fixed timeout handling in cRwLock::Lock() (thanks to Sascha Volkenandt for reporting this one). - Since there are several places in thread.c where a timeout value is calculated, this has been put into a separate function. - The timer status now has a new bit that is set when that timer is currently recording (suggested by Matthias Schniedermeyer). See man vdr(5) for details. - Removed scaling coordinates in letterbox mode from cDvbSpu - the DVD plugin, which was the only one needing this, doesn't need it any more (thanks to Marco Schlüßler). - No longer retuning or restarting a recording if only the language code of an audio or Dolby PID changes. - Now preferring budget cards when selecting a DVB device for recording. - Recordings now avoid zero sized video data files (thanks to Wolfgang Fitz). - Some rearrangements in cDvbPlayer::Action() to avoid lockups on NPTL systems (thanks to Reinhard Nissl). - Fixed a wrong inheritance in libsi's SubtitlingDescriptor::Subtitling (thanks to Marco Schlüßler). |
||
|
Klaus Schmidinger
|
3038be2a6a |
Version 1.3.15
- Fixed some typos in the Makefile's 'font' target (thanks to Uwe Hanke). - Added more checks and polling when getting frontend events (based on a patch from Werner Fink). - No longer explicitly waiting for a tuner lock when switching channels (apparently setting "live" PIDs before the tuner is locked doesn't hurt). Moved the wait into cDevice::AttachReceiver() instead. - Immediately displaying the new channel info when switching channel groups. - Moved the main program loop variables further up to allow compilation with older compiler versions (thanks to Marco Schlüßler for reporting this one). - Now calling pthread_cond_broadcast() in the destructor of cCondWait and cCondVar to make sure any sleepers will wake up (suggested by Werner Fink). Also using pthread_cond_broadcast() instead of pthread_cond_signal() in cCondWait, in case there is more than one sleeper. - Making sure that timers and channels are only saved together, in a consistent manner (thanks to Mirko Dölle for reporting a problem with inconsistent channel and timer lists). - Now handling the channel name, short name and provider separately. cChannel therefore has two new functions, ShortName() and Provider(). ShortName() can be used to display a short version of the name (in case such a version is available). The optional boolean parameter of ShortName() can be set to true to make it return the name, if no short name is available. The sequence of 'name' and 'short name' in the channels.conf file has been swapped (see man vdr(5)). - Added the 'portal name' to cChannels (thanks to Marco Schlüßler). - Fixed handling key codes that start with 0x1B in the KBD remote control code. - Now using qsort() to sort cListBase lists. For this, the virtual function cListObject::operator<() has been replaced with cListObject::Compare(). Plugins that implement derived cListObject classes may need to adjust their code. - The "Channels" menu can now be sorted "by number" (default), "by name" and "by provider". While in the "Channels" menu, pressing the '0' key switches through these modes. - Fixed the buffer size in cRecording::SortName(). - Now displaying the name of the remote control for which the keys are being learned inside the menu to avoid overwriting the date/time in the 'classic' skin (thanks to Oliver Endriss for reporting this one). |
||
|
Klaus Schmidinger
|
c80a53ff6e |
Version 1.3.7
- Fixed a memory leak in thread handling when using NPTL (thanks to Jon Burgess). - Fixed handling Setup.RecordDolbyDigital, which was broken since version 1.1.6. - Fixed handling text lengths for itemized EPG texts (thanks to Marcel Wiesweg). - Fixed the help for LSTE and LSTR (was broken in 1.3.6). - Improved iso8859-7 fonts (thanks to Dimitrios Dimitrakos). - Added some 3-letter language codes (thanks to Marcus Mönnig). - Added language code handling to the subtitling descriptor in 'libsi' (thanks to Pekka Virtanen). - Moved several menu item classes from menu.c to menuitems.[hc] to make them available for plugins. - The epg2html.pl script now handles '|' in description texts. - The new setup option "OSD/Use small font" can be used to control the use of the small font (see MANUAL for details). - Swapped osd.[hc] and osdbase.[hc] to have the virtual OSD base class named cOsd. Plugins may need to adjust their #include statements. - Colors are now given as AARRGGBB instead of AABBGGRR. The values are mapped to the driver's (wrong) sequence in dvbosd.c (this should really be fixed in the driver, together with the endian problem). - The new OSD setup parameters "Left" and "Top" can be used to define the top left corner of the OSD. - The OSD size parameters are now in pixel (as opposed to formerly characters). When reading a 'setup.conf' file from an older version of VDR, the OSDwidth and OSDheight values will be converted to pixel automatically. - The OSD is now fully device independent. See the comments in VDR/osd.h and the description in PLUGINS.html for information on how a plugin can implement an OSD display on arbitrary hardware. - The OSD (actually its cBitmap class) can now handle XPM files. There are several XPM files in the VDR/symbols directory which can be used by skins (some of these have been taken from the "elchi" patch). See VDR/skinsttng.c for examples on how to use these. - Due to the changes in the OSD handling the DEBUG_OSD option for a textual OSD has been dropped. There will be a plugin that implements a skin with this functionality later. - The entire OSD display can now be implemented via "skins". See VDR/skins.[hc], VDR/skinclassic.[hc], VDR/skinsttng.[hc] and PLUGINS.html for information on how a plugin can implement its own skin. By default VDR comes with a "Classic" skin that implements the OSD display known from previous versions, and the new skin named "ST:TNG Panels", which is also the default skin now. The actual skin can be selected through "Setup/OSD/Skin". - The colors used in a skin can now be configured using "themes". See PLUGINS.html for information on how a skin can make use of themes, and man vdr(5) for the structure of a theme file. The actual theme to use can be selected through "Setup/OSD/Theme". - Added Croatian language texts (thanks to Drazen Dupor). NOTE: there is apparently a problem with the newly introduced iso8859-2 font, because as soon as Setup/OSD/Language is set to Croatian (currently the last one in the list) everything freezes and the vdr processes have to be killed with -9 and the driver needs to be reloaded. Maybe somebody else can find out what's going wrong here... - Added missing NULL checks when accessing sectionHandler in device.c (thanks to Pekka Virtanen). - Fixed setting the time from the DVB data stream (thanks to Helmut Auer for pointing out a frequency/transponder handling mixup). This now also takes the actual source (sat, cable etc.) into account. Please go into "Setup/EPG" and set the "Set system time" and "Use time from transponder" parameters accordingly (this is necessary even if you have already set them before!). |
||
|
Klaus Schmidinger
|
9384e56566 |
Version 1.3.6
- Completed the Finnish OSD texts (thanks to Rolf Ahrenberg). - Fixed some descriptor handling in 'libsi' (thanks to Stéphane Esté-Gracias). - Fixed handling the current menu item (thanks to Marc Hoppe). - Fixed assigning events to timers (they no longer get "stuck"). - Added log entries whenever the running status of an event changes (currently only logging the first 30 channels). - Fixed handling timers in VPS margin if the EPG scan is turned on (the EPG scan switched the device away from the channel, so it wouldn't see the change of the running status). - Fixed handling "itemized" texts in EPG data (thanks to Stéphane Esté-Gracias for pointing out this problem, and Marcel Wiesweg for improving 'libsi'). - Fixed handling VPS times at year boundaries. - Avoiding too many consecutive "ring buffer overflow" messages (which only slowed down performance even more). - Taking the Sid into account when detecting version changes in processing the PMT (thanks to Stéphane Esté-Gracias for pointing out this problem). - Completed the Russian OSD texts (thanks to Vyacheslav Dikonov). - Any newline characters in the 'description' of EPG events are now preserved to allow texts to be displayed the way the tv stations have formatted them. This was also necessary to better display itemized texts. - Fixed detecting the running status in case an empty EPG event is broadcast (thanks to Michael Pennewiß for pointing this out). - Improved performance when paging through very long menu lists. - Removed cSchedule::GetEventNumber() and cSchedule::NumEvents(). There is now cSchedule::Events() that returns the list of events directly. - Avoiding occasional bad responsiveness to user interaction caused by assigning events to timers. - Now explicitly turning on the LNB power at startup, because newer drivers don't do this any more (thanks to Oliver Endriss for pointing this out). |
||
|
Klaus Schmidinger
|
5a4eb3f104 |
Version 1.3.5
- Fixed reading the EPG preferred language parameter from 'setup.conf'. - Fixed switching to a visible programme in case the current channel has neither a video nor an audio PID. - Fixed editing channels (SID now range checked) and creating new channels (NID, TID and RID are now set to 0). - Fixed transponder handling to make it work with satellites that provide two transponders on the same frequency, with different polarization, like Hispasat at S30.0W (thanks to Thomas Bergwinkl for pointing this out). See man vdr(5) for details about the enhanced channel ID format. - Since there appears to be no general solution for the UPT error yet, a recording now initiates an "emergency exit" if the number of UPT errors during one recording exceeds 10 (suggested by Gregoire Favre). Since the UPT error doesn't happen on my system, this has not been explicitly tested. The "preliminary fix" for the UPT error in VDR/dvbdevice.c has been disabled by default, since it makes channel switching unpleasently slow. If you want to have that workaround back, you can uncomment the line //#define WAIT_FOR_LOCK_AFTER_TUNING 1 in VDR/dvbdevice.c. - Adapted the 'sky' plugin to use the actual channel IDs, and to fetch EPG data from www.bleb.org. - Limited automatic retuning to devices that actually provide the transponder (necessary for the 'sky' plugin). - Fixed handling receivers in the 'sky' plugin, so that a recording on the same channel won't interrupt an ongoing Transfer Mode. - Added subtable ID and TSDT handling to 'libsi' (thanks to Marcel Wiesweg). - Fixed some Russian OSD texts (thanks to Vyacheslav Dikonov). - Added the 'running status' to the EPG events. This is necessary for implementing the VPS function for recording. - Removed the obsolete 'present' and 'following' handling from the EPG data. - The EPG data is now always kept sorted chronologically in the internal data structures. This also means that any EPG data retrieved through the SVRDP command LSTE is guaranteed to be sorted by start time. - Now using the 'running status' in the channel display, so that a programme that has an end time that is before the current time, but is still running, will still be shown in the display (provided the broadcasters handle the 'running status' flag correctly). This also applies to programmes that have a start time that is in the future, but are already running. - Implemented an "EPG linger time", which can be set to have older EPG information still displayed in the "Schedule" menu (thanks to Jaakko Hyvätti). - Added PDCDescriptor handling to 'libsi'. - Implemented handling the VPS timestamps (aka "Programme Identification Label") for full VPS support for timers (provided the tv stations actually broadcast this information). The VPS time is displayed in the event info page if it exists and is different than the event's start time. - Extended the SVDRP command LSTE to allow limiting the listed data to a given channel, the present or following events, or events at a given time (thanks to Thomas Heiligenmann). - Fixed a typo in libsi/si.h (thanks to Stéphane Esté-Gracias). - Timers can now be set to use the VPS information to control recording a programme. The new setup options "Recording/Use VPS" and "Recording/VPS margin", as well as the "VPS" option in the individual timers, can be used to control this feature (see MANUAL for details). Note that this feature will certainly need a lot of testing before it can be called "safe"! - The "Schedule" and "What's on now/next?" menus now have an additional column which displays information on whether there is a timer defined for an event, whether an event has a VPS time that's different than its start time, and whether an event is currently running (see MANUAL under "The "Schedule" Menu" for details). |
||
|
Klaus Schmidinger
|
b8e837dbbb |
Version 1.3.2
- Fixed resetting the EPG data versions after changing the preferred languages (thanks to Teemu Rantanen for reporting this one and helping to debug it). - Added LinkageDescriptor handling to 'libsi' (thanks to Marcel Wiesweg). - Added Russian language texts (thanks to Vyacheslav Dikonov). Plugin authors may want to add the new entries to their I18N texts and contact the translators to have their texts translated. Note that there are now 17 different OSD languages, so please make sure you have 17 versions for each of your texts. - Some corrections and additions to the Finnish OSD texts (thanks to Rolf Ahrenberg and Niko Tarnanen). - Fixed a wrong 'delta' value in the call to the shutdown script (thanks to Stephan Epstein for reporting this one). - Activated detection of radio channels (to avoid reports about "channels not being detected that used to be detected with the 'scan' utility or the original 'autopid' patch ;-). - Channels with a zero VPID no longer write a PPID into channels.conf. - Short channel names are now only stored if they actually differ from the full name. - The EPG scan now scans newly found transponders together with already existing ones. - The "Red" button in the "Setup/EPG" menu can now be used to force an EPG scan on a single DVB card system (see MANUAL for details). - The new SVDRP command 'SCAN' can be used to force an EPG scan on a single DVB card system (see MANUAL under Setup/EPG for details). - Fixed handling PID changes in 'Transfer Mode'. - Excess blanks in channel names read from the SDT are now removed. - Fixed wrong parameter settings when scanning NITs for terrestrial transponders (thanks to Christian Tramnitz for pointing out this one). - Fixed some out of bounds parameter settings when scanning NITs for cable and satellite transponders. - Added 'libsi' include files to the 'include' directory, so that plugins can use them (thanks to Marcel Wiesweg). - Now only processing NITs that contain the transponder they are actually broadcast on. - Fixed setting the source type for newly detected terrestrial transponders (thanks to Christian Tramnitz for his support in debugging this). |
||
|
Klaus Schmidinger
|
a76a03c0d8 |
Version 1.3.1
- Fixed a lockup in the EPG scanner when no non-primary device was available (thanks to Martin Holst for reporting this one). - Fixed a compiler warning about virtual cConfig::Load() functions (thanks to Lauri Tischler for reporting this one). - Fixed a warning about character comparison in libsi/si.c (thanks to Lauri Tischler for reporting this one). - The new parameter "Update channels" in the "Setup/DVB" menu can be used to control if and how channels will be automatically updated (see MANUAL). This has already been part of the 'autopid' patch by Andreas Schultz and has now been adopted. - Fixed a crash in case there is no DVB hardware present (thanks to Sascha Volkenandt for reporting this one). - Changed calculation of channel ids to make it work for tv stations that use the undefined NID value 0 (thanks to Teemu Rantanen for reporting this one). - Enhanced the SDT filter to handle multi part sections. - Added support for selecting preferred EPG languages (based upon a patch by Teemu Rantanen). - Fixed a 'const' in libsi/si.h (thanks to Marcel Wiesweg). - Fixed the 'su' call in 'runvdr' to make it work on systems that require the user name to appear before the command option (thanks to Robert Huitl). - Fixed testing for matching section filters in case they are turned off (thanks to Marcel Wiesweg). - In case of incomplete sections an error message is now logged only every 10 seconds. - Fixed a possible NULL pointer access in cEITScanner::Process() (thanks to Andreas Kool). - The actual transponder data is now taken from the NIT and existing channels are adjusted if necessary. If the NIT contains new transponders, they are scanned for channels during the next EPG scan. Note that only the satellite branches are tested, cable and terrestrial need to be tested by somebody who actually has such equipment. |
||
|
Klaus Schmidinger
|
93a94b18b5 |
Version 1.3.0
- Changed thread handling to make it work with NPTL ("Native Posix Thread Library").
Thanks to Jon Burgess, Andreas Schultz, Werner Fink and Stefan Huelswitt.
- The cThread class now accepts a 'Description' parameter, which is used to log
the beginning and end of the thread, together with its process and thread id.
For descriptions that need additional parameters you can use the function
cThread::SetDescription(), which accepts 'printf()' like arguments.
Existing plugins that use threads should be changed to use this functionality
instead of explicit 'dsyslog()' calls inside their Action() function in order
to support logging the thread ids.
- Added "Slovak Link" and "Czech Link" to 'ca.conf' (thanks to Emil Petersky).
However, 'ca.conf' is now pretty much obsolete due to the automatic CA handling.
- Mutexes are now created with PTHREAD_MUTEX_ERRORCHECK_NP, which makes the
'lockingTid' stuff obsolete (thanks to Stefan Huelswitt).
- Changed font handling to allow language specific character sets.
- Adopted the small font character set from the "Elchi" patch (originally
provided by Alessio Sangalli).
- Greek language texts now use iso8859-7 character set (thanks to Dimitrios
Dimitrakos).
- Rearranged section data handling, so that the actual data handling can be done
separately, even from within plugins.
- The EPG data structures have been moved from eit.[hc] to epg.[hc] and have been
adapted to the general VDR coding style. Plugins that use these data structures
may need to change some function names (which should be obvious).
The name 'subtitle' has been changed to 'shortText' to avoid clashes with actual
subtitles that are part of a movie. The name 'extendedDescription' has been
shortened to 'description'.
- Replaced 'libdtv' with 'libsi' (thanks to Marcel Wiesweg), which is thread
safe and can be used by multiple section filters simultaneously.
- Added 'cRwLock' to 'thread.[hc]'. Note that all plugin Makefiles need to
define _GNU_SOURCE for this to work (see the example plugin Makefiles and
'newplugin').
- Fixed a problem with crc32 in SI handling on 64bit systems (thanks to Pedro
Miguel Sequeira de Justo Teixeira for reporting this one).
- Fixed an alignment problem in CAM access on 64bit systems (thanks to Pedro
Miguel Sequeira de Justo Teixeira for reporting this one).
- Added 'StreamType' setting to CAM communication, which is important for
Aston/SECA CAMs (thanks to Antonino Sergi).
- Now the CA descriptors are sent to the CAM in the 'program' or 'ES level'
sections, depending on where they are found in the PMT (thanks to Hans-Peter
Raschke for reporting this one). This should make SkyCrypt CAMs work.
- Now using the 'version number' of EPG events to avoid unnecessary work.
- Channel data is now automatically derived from the DVB data stream (inspired
by the 'autopid' patch from Andreas Schultz).
- The current channel is now automatically re-tuned if the PIDs or other settings
change. If a recording is going on on a channel that has a change in its
settings, the recording will be stopped and immediately restarted to use the
new channel settings.
- EPG events now use the complete channel ID with NID, TID and SID.
- Channel names in 'channels.conf' can now have a short form, as provided
by some tv stations (see man vdr(5)). Currently channels that provide short
names in addition to long ones are listed in the OSD as "short,long name",
as in "RTL,RTL Television". The short names will be used explicitly later.
- The Ca parameter in 'channels.conf' has been extended and now contains all the
CA system ids for the given channel. When switching to a channel VDR now tests
for a device that provides one of these CA system ids. The devices automatically
get their supported ids from the CI handler.
- The values in 'ca.conf' are currently without any real meaning. Whether or not
a channel with conditional access can be received is now determined automatically
by evaluating its CA descriptors and comparing them to the CA system ids
provided by the installed CAM. Only the special values 1-16 are used to assign
a channel to a particular device.
- Increased the maximum number of possible OSD colors to 256.
- Limited the line length in the EPG bugfix report, which appears to fix a buffer
overflow that caused a crash when cleaning up the EPG data (at 05:00 in the
morning).
|
||
|
Klaus Schmidinger
|
bff4529f01 |
Version 1.2.5pre2
- Updated VIVA, VIVA Plus, MTV Central and MTV 2 in channels.conf (thanks to Sebastian Frei). - Changed "Studio Universal" to "Sci-Fi" in channels.conf. - Fixed a crash when using the --terminal option without having access to the given terminal (thanks to Steffen Barszus for helping to debug this one). - Added a note about the driver version needed for the still picture fix from version 1.2.5pre1 to work properly (thanks to Oliver Endriss for pointing this out). - Fixed setting the primary device in case none of the devices provides an MPEG decoder (thanks to Rene Bartsch for reporting this one). - Fixed handling the "Red" button in the "Schedules" menu in case there are no events listed for a particular channel (thanks to Christoph Hermanns for reporting this one). - When setting an editing mark while in "Pause" mode, replay now immediately jumps to the marked frame (thanks to Oskar Signell for pointing out this problem). - The DVB devices no longer send CA descriptors to the CAM while the EPG scanner is active (sometimes the CAMs got irritated when the device tuned to channels they couldn't handle). |
||
|
Klaus Schmidinger
|
8ab980e1d9 |
Version 1.1.33
- Modified handling of audio packets in cDvbPlayer for better sync with external AC3 replay (thanks to Werner Fink). - Fixed a memory leak in cNonBlockingFileReader (thanks to Stefan Huelswitt). - Completed the French OSD texts (thanks to Gregoire Favre). - Completed the Finnish OSD texts (thanks to Niko Tarnanen and Rolf Ahrenberg). - Fixed I/O handling in case an explicit controlling terminal is given (thanks to Oliver Endriss). - Fixed resume file handling in case the resume.vdr file can't be written (thanks to Gerhard Steiner). - Fixed cutting a recording if there is only a single editing mark (thanks to Ralf Klueber for reporting this one). - Fixed volume display in case a plugin has its own OSD open (thanks to Marcel Wiesweg). - Fixed channel switching in the EPG scanner on single device systems. - Completed the Swedish OSD texts (thanks to Tomas Prybil). - Now switching to the channel used by the most recently started timer in case the original current channel becomes unavailable due to a recording on a different transponder. If this fails, a channel up/down switch is attempted as a fallback solution (thanks to Lauri Tischler for reporting this one, and to Hermann Gausterer for suggesting to switch to the recording channel). - Fixed cReplayControl::Show() to avoid a compiler warning in g++ 3.2.3 (thanks to Jan Ekholm for reporting this one). - Completed the Slovenian OSD texts (thanks to Matjaz Thaler). - Changed the DEFAULTPRIORITY in device.c to -1, so that the primary device will be used for FTA recordings in case the CAM is connected to a non-primary device (thanks to Reinhard Walter Buchner for reporting this one). - The cCiHandler now closes its file handle when it gets destroyed. - Checking for duplicate recordings with the same file name and disabling the second timer (thanks to Peter Bieringer for reporting this one). - Fixed handling newly created timers in case they are not confirmed with "Ok" (thanks to Gerhard Steiner for reporting this one). - It is now possible to directly delete a timer that is currently recording (thanks to Alexander Damhuis for reporting this one). |
||
|
Klaus Schmidinger
|
b60eda5a8e |
Version 1.1.26
- Removed signal handling and usleep(5000) from cDvbOsd::Cmd() (apparently this is no longer necessary with DVB driver 1.0.0pre2 or later). - If the primary device (as defined in setup.conf) doesn't have an MPEG decoder (and thus can't be used as a primary device) VDR now scans all devices at startup and uses the first one (if any) that actually has an MPEG decoder. That way this will also work automatically if the primary device is implemented by a plugin. - Fixed a possible deadlock when using the "Blue" button in the "Schedules" menu to switch to an other channel (thanks to Torsten Herz). - Fixed the EPG bugfix code number for the MAX_USEFUL_SUBTITLE_LENGTH fix (thanks to Torsten Herz for reporting this one). - Modified the EPG scanner to avoid CPU load peaks (thanks to Steffen Becker for reporting this one). - Fixed support for Viaccess CAMs (thanks to Axel Gruber for helping to debug this). |
||
|
Klaus Schmidinger
|
a3942b4d17 |
Version 1.1.22
- Added 'Hrvatska radiotelevizija' and 'RTV Slovenija' to ca.conf (thanks to
Paul Gohn).
- Implemented actual user input for CAM enquiry menus.
- Since disk file systems apparently don't honor the O_NONBLOCK flag to read from
a file in non-blocking mode the cDvbPlayer now uses a non blocking file reader
class to make sure replay remains smooth even under heavy system load.
- Increased the maximum possible packet size in remux.c to avoid corrupted streams
with broadcasters that send extremely large PES packets (thanks to Teemu Rantanen).
- Added TS error checking to remux.c (thanks to Teemu Rantanen).
- Modified cRingBufferLinear to avoid excessive memmove() calls in 'Transfer Mode'
and during recordings, which dramatically reduces CPU load. Thanks to Teemu
Rantanen for pinpointing the problem with the excessive memmove() calls.
- Updated 'channels.conf' (thanks to Achim Lange).
- Added/improved Swedish language texts (thanks to Jan Ekholm).
- Fixed the description of the "Scroll pages" OSD setup parameter ('yes' and 'no'
were mixed up).
- Fixed handling the LOG_LOCALn parameters in the -l option (thanks to Dimitrios
Dimitrakos).
- Changed EIT processing to always read a full section.
- Fixed handling user defined CFLAGS in libdtv/libvdr/Makefile (thanks to Clemens
Kirchgatterer and Robert Schiele).
- Fixed skipping unavailable channels in the EPG scanner.
|
||
|
Klaus Schmidinger
|
1a8a081629 |
Version 1.1.15
- Completely switched to the new CVS HEAD version of the linux-dvb driver. The NEWSTRUCT compile time switch is now obsolete. The required driver is now the CVS HEAD version dated 2002-11-01 or later. - Adjusted the INSTALL file to the 1.1.x version. - Only accepting key presses from the current remote control when learning (thanks to Oliver Endriss). - Fixed the EPG scanner, which broke 'Transfer Mode' as soon as it kicked in (thanks to Oliver Endriss for reporting this one). - Fixed handling audio tracks in cDvbDevice. - Updated channels.conf.terr (thanks to Uwe Scheffler). - Fixed displaying the group separators in the channel display (thanks to Martin Hammerschmid for pointing out this one). - The Makefile now includes the file Make.config (if present in the VDR source directory), which allows the user to overwrite several settings with individual values (suggested by Andreas Schultz). The VDR distribution archive does not contain this file in order to not overwrite a user defined file. There is a Make.config.template which contains the default values of the macros the user can overwrite. - Since there have been changes to the 'newplugin' script authors of plugins may want to newly create their plugins' Makefiles with the new version of this script, and adapt them to their individual needs (make sure you don't overwrite your existing plugin directory - make a backup copy first!). - Fixed reading EPG data via the SVDRP command PUTE (it changed the current service ID). - Fixed closing all dup'ed file descriptors in cPipe. - Implemented a plugin interface for additional audio processing (see PLUGINS.html under "Dolby Digital"). The functionality of the '-a' command line option has been reactivated. Since the author doesn't have any Dolby Digital equipment this may or may not work as expected. There may still be some places where a call to cAudios::Clear() or cAudios::Mute() is necessary. Those with Dolby Digital equipment should please take a look at this and maybe send patches. Replaying Dolby Digital in ways other than through VDR's '-a' option will have to be implemented as plugins. Those who have written patches for VDR version 1.0.x should convert their work into the proper plugins for version 1.1.x. Note to authors of cPlayer derived plugins: please read the modified comments in device.h regarding the member functions cDevice::Clear(), cDevice::Mute() and cDevice::PlayAudio(). Derived classes must call these base class member functions to make sure all registered cAudio objects are properly handled. Also note that the return type of cDevice::PlayAudio() has been changed to 'void', since this function always has to accept the entire data block immediately and there is nothing that could be reasonably done in case an error occurs in one of the cAudio objects. - Now checking the driver's DVB_API_VERSION in dvbdevice.h. Since VDR now requires a driver dated 2002-11-01 or later the MIN_DVB_DRIVER_VERSION_FOR_TIMESHIFT and DVB_DRIVER_VERSION stuff has been replaced with DO_REC_AND_PLAY_ON_PRIMARY_DEVICE, which can be used to disable simultaneous recording and replaying on the primary DVB device in case there are problems with this. |
||
|
Klaus Schmidinger
|
57bd7eeed1 |
Version 1.1.14
- Fixed some faulty default parameter initializations (thanks to Robert Schiele).
- Added further satellites to 'sources.conf' (thanks to Reinhard Walter Buchner
and Oliver Endriss).
- Updated Finnish OSD texts (thanks to Jaakko Hyvätti).
- Fixed a small glitch when switching channels (thanks to Dennis Noordsij for
reporting this one).
- Fixed handling multiple 'CaCaps' entries in 'setup.conf'.
- Group separators in 'channels.conf' may now be given like ':@201 My Channels',
where '@201' indicates the number to be given to the next channel. This can be
used to create 'gaps' in the channel numbering (see 'man 5 vdr'). BE CAREFUL
TO UPDATE YOUR 'timers.conf' ACCORDINGLY IF INSERTING THIS NEW FEATURE INTO YOUR
'channels.conf' FILE!
- Timers now internally have a pointer to their channel (this is necessary to
handle gaps in channel numbers, and in preparation for unique channel ids).
- Fixed slow reaction on SVDRP input (thanks to Guido Fiala for reporting this one).
- Added KI.KA to channels.conf.cable (thanks to Robert Schiele).
- Frequency values for cable and terrestrial channels in 'channels.conf' can
now be given either in MHz, kHz or Hz. The actual value given will be multiplied
by 1000 until it is larger than 1000000.
- Fixed skipping unavailable channels when zapping downwards.
- Fixed checking the Ca() status of a cDevice (thanks to Stefan Huelswitt).
- Fixed switching audio tracks in 'Transfer Mode' on the primary DVB device
(thanks to Steffen Barszus and Stefan Huelswitt for reporting this one and
helping to fix it).
- Fixed channel switching in case of an active 'Transfer Mode' on the primary
device ('Transfer Mode' is now launched with priority '-1').
- Fixed a ternary expression in dvbspu.c.
- Fixed handling 'Transfer Mode' on single device systems when recording an
encrypted channel (thanks to Stefan Huelswitt).
- Fixed blocking replaying in case an encrypted channel is being recorded on
the primary device.
- Now the name of the remote control is displayed when learning the keys.
- Fixed learning remote control keys in case there is more than one remote
control (thanks to Oliver Endriss for reporting this one).
- Implemented additional dedicated keys for "Play", "Pause", "Stop", "Record",
"FastFwd", "FastRew", "Channel+" and "Channel-". If your remote control supports
any of these keys you can delete your 'remote.conf' file and restart VDR to
go through the key learning procedure again in order to assign these new keys.
See MANUAL for more information.
Authors of player plugins should update their ProcessKey() functions so that
the new player keys have the same functionality as the "Up", "Down", "Left",
"Right" and "Blue" keys, respectively. Note that the existing functionality
of these keys should by all means be retained, since VDR (and any plugins)
shall be fully usable with just the basic set of keys. These new keys are only
for additional comfort in case the remote control in use supports them.
- Implemented new keys to directly access the VDR main menu functions "Schedule",
"Channels", "Timers", "Recordings", "Setup" and "Commands". If your remote
control provides keys you want to assign these functions to, you can delete
your 'remote.cof' file and restart VDR to go through the key learning procedure
again in order to assign these new keys. See MANUAL for more information.
- The new configuration file 'keymacros.conf' can be used to assign macros to
the color buttons in normal viewing mode, as well as to up to 9 user defined
keys. See MANUAL and man vdr(5) for more information. The default 'keymacros.conf'
implements the functionality of the "color button patch".
- Fixed a crash when learning the keys of several remote controls and pressing
buttons of those that have already been learned (thanks to Oliver Endriss for
reporting this one).
|
||
|
Klaus Schmidinger
|
313e33539c |
Version 1.1.12
- Fixed a missing Flush() call in the remote control learning procedure (thanks to Oliver Endriss). - Modified channel handling to cover all parameters necessary for DVB-C and DVB-T (see man vdr(5) for the meaning of the additional parameters stored in the field previously named 'polarisation'). Thanks to Uwe Scheffler and Andy Carter for testing. If you have a system with different kinds of DVB cards, like DVB-T and DVB-C, for instance, there is no more need to distinguish the channels through the 'Ca' parameter in order to assign them to the various DVB cards. This is now taken care of by the "source" parameter. So a channel marked as "terrestrial", for example, will only be received on DVB-T cards. Note that the cChannel class has been moved into a separate file (channels.[ch]), and that all data members have been made private and are now only accessible through member functions. You may have to change any plugin code that accesses cChannel data accordingly. - The new configuration file 'sources.conf' contains the various signal sources (satellites, cable and terrestrial) which are used in 'channels.conf' and 'diseqc.conf' (thanks to Reinhard Walter Buchner for adding some satellites to 'sources.conf' and Oliver Endriss and Lauri Tischler for testing and debugging). - The 'diseqc' parameter in the channel definitions has been redefined to hold the "source" of the given channel (which can be either a satellite, cable or terrestrial). For compatibility with channels.conf files from older versions, numeric values in this parameter will be tolerated, but they have no meaning. If you want to use DiSEqC you will need to replace these old values with the proper source identifiers defined in the new configuration file 'sources.conf'. See how this is done in the 'channels.conf' file that comes with the VDR package. - The new configuration file 'diseqc.conf' can be used to set up the individual diseqc configuration (see man vdr(5) for a description of the file format). - The "Edit channel" menu has a new entry "Source:" in which the source of this channel can be selected (either a satellite, cable or terrestrial). The set of parameters at the end of this menu will change according to the type of source. - The "Use DiSEqC" parameter in the "Setup/LNB" menu has been moved to the beginning of the list and disables the rest of the parameters when set to "yes", since these are now only meaningful if DiSEqC is _not_ used. - Removed some unnecessary #includes from eit.c and changed cMenuRecordings::Del() to cMenuRecordings::Delete() to avoid warnings in gcc-3.2 (thanks to Andreas Schultz for pointing this out). - Improved skipping channels that are (currently) not available (thanks to Stefan Huelswitt). - Updated channels.conf.terr and channels.conf.cable (thanks to Uwe Scheffler). - Fixed a bug when pressing the "Blue" button in the main menu without having displayed it (thanks to Oliver Endriss for reporting this one). |
||
|
Klaus Schmidinger
|
523c4a07aa |
Version 1.1.9
- Fixed the 'newplugin' script to make it name the target for creating the distribution package 'dist', as stated in the PLUGINS.html documentation. If you have already created a plugin source directory and Makefile you may want to check it and replace the 'package' target with 'dist' if necessary. - Changed device handling for being able to do simultaneous recording and replay on the same device (Time Shifting). In order for this to work you need to use a driver with a firmware version that has this feature implemented. - cDevice::ProvidesCa() is no longer virtual. The new function cDevice::ProvidesChannel() is now used to determine whether a device can receive a given channel, and by default this function returns false. So a device that is a pure replaying device doesn't need to do anything here. - Increased the recorder buffer size to 5MB in order to be able to better handle multiple recordings. - Implemented cTSBuffer for better handling TS packet buffering in derived cDevice classes. - Changed the interface if cDevice::GetTSPacket() to avoid unnecessary copying of data. - Removed cDevice::Channel(), since this makes no more sense with devices receiving multiple channels. - Switching through channels with the 'Up' and 'Down' keys now skips channels that are currently not available (for instance because all devices are recording and these channels are on different transponders). - Implemented an SPU decoder (thanks to Andreas Schultz). - Fixed a crash when entering an integer value outside the limits (thanks to Stefan Huelswitt for reporting this one). - Added play mode pmAudioOnlyBlack (thanks to Stefan Huelswitt). |
||
|
Klaus Schmidinger
|
ed643353b1 |
Version 1.1.7
- Adapted VDR to the NEWSTRUCT driver. To use the new driver, compile VDR with 'make NEWSTRUCT=1' (thanks to Holger Wächtler for some valuable advice). By default it currently still uses the old driver. - Added some missing #includes (thanks to Martin Hammerschmid). - Changed the log error message "can't record MPEG1!" to "error in data stream!", since the mentioning of MPEG1 has irritated many people. - Consistently using malloc/free and new/delete (thanks to Andreas Schultz). - Temporarily made cDevice::ProvidesCa() virtual (Andreas Schultz needs this in his DXR3 plugin). - cDevice no longer exposes a file handle to cPlayer. A derived cPlayer class can now call DevicePoll() to see whether the replay device is ready for further data. A derived cDevice class must implement Poll() and shall check if any of its file handles is ready for data. - Implemented several replay modes to allow players that play only audio (thanks to Stefan Huelswitt). - Improved cCondVar::Wait() and implemented cCondVar::TimedWait() (thanks to Stefan Huelswitt). - VDR no longer gives up if there is no DVB device. It continues to work if there is at least one device, either a DVB device found by the core VDR code itself, or a device implemented by a plugin. |
||
|
Klaus Schmidinger
|
527748826c |
Version 1.1.6
- Re-visited the race condition fix in the cDvbPlayer (thanks again to Andreas Schultz). - Changed the VFAT handling to allow users who normally use it but have forgotten to set it when compiling a new version of VDR to at least see their recordings made with VFAT enabled (thanks to Christian Rienecker). - Added some missing teletext PIDs (thanks to Joerg Riechardt). - Fixed PID handling for cReceiver. - Added a missing #include to ringbuffer.c (thanks to Martin Hammerschmid). - Now using CC, CFLAGS, CXX and CXXFLAGS in Makefile. - Changed the cDevice class to allow plugins to implement their own devices (see PLUGINS.html for details). |
||
|
Klaus Schmidinger
|
54d069c95c |
Version 1.1.4
- Added Hungarian language texts (thanks to Istvan Koenigsberger and Guido Josten). - Activated cutting. - Activated 'Transfer Mode'. - Moved handling of the Menu key entirely into vdr.c. - Switched VDR's own player to the new cPlayer/cControl structures. - Switched handling 'Transfer Mode' to the new cPlayer/cControl structures. - The following limitations apply to this version: + The '-a' option (for Dolby Digital audio) doesn't work yet. + Switching between different language tracks doesn't work yet. |
||
|
Klaus Schmidinger
|
f06d2c27fc |
Version 1.1.3
- Improved the VDR Makefile to avoid a warning if the '.dependencies' file does not exist, and also using $(MAKE) to call recursive makes. - Changed the name of the 'package' target in the plugin Makefiles to 'dist' (following the suggestions in the "GNU Make" manual). If you already have started a plugin project, you may want to change this in your Makefile accordingly. - Improved the plugin Makefile to avoid a warning if the '.dependencies' file does not exist, and also using $(shell...) to get the version numbers. If you already have started a plugin project, you may want to change this in your Makefile accordingly. - Fixed some function headers to make them compile with gcc 3.x (thanks to Gregoire Favre). - Fixed the cutting mechanism to make it re-sync in case a frame is larger than the buffer (thanks to Sven Grothklags). - Added an error message if the directory specified in the '-L' option can't be accessed (suggested by Stefan Huelswitt). - Rearranged OSD class names to make 'cOsd' available for the main OSD interface. - Completely moved OSD handling out of the cDvbApi class, into the new cOsd. - Implemented cStatus to allow plugins to set up a status monitor. See PLUGINS.html for details. - Moved the cEITScanner out of dvbapi.h/.c, into the new eitscan.h/.c. - Added Swedish language texts (thanks to Tomas Prybil). - Fixed parsing 'E' records in epg2html.pl (thanks to Matthias Fechner for pointing out this one). - Removed compiler option '-m486' to make it work on non-Intel platforms. If you have already started a plugin project, you may want to make sure you remove this option from your existing Makefile. - Completely rearranged the recording and replay functions to make them available to plugins. - Replay is now done in a single thread (no more syncing between input and output thread necessary). - It is now possible to record several channels on the same transponder with "budget cards". VDR automatically attaches a recording timer to a card that already records on the appropriate transponder. How many parallel recordings can actually be done depends on the computer's performance. Currently any number of recordings gets attached to a card, so you should carefully plan your timers to not exceed the limit. On a K6-II/450 it was possible to record three channels from transponder 12480 with a single WinTV NOVA-S. - Timers that record two successive shows on the same channel may now overlap and will use the same DVB card. During the time where both timers record the data is simply saved to both files. - The following limitations apply to this version: + Transfer mode doesn't work yet. + The '-a' option (for Dolby Digital audio) doesn't work yet. + Switching between different language tracks doesn't work yet. + Cutting doesn't work yet. |