mirror of
https://github.com/vdr-projects/vdr.git
synced 2025-03-01 10:50:46 +00:00
11 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Klaus Schmidinger
|
59f0138a7d |
Version 1.7.23
Original announce message:
VDR developer version 1.7.23 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.23.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.22-1.7.23.diff
MD5 checksums:
de136f7be28c4b6f1fa0e2218b4acc11 vdr-1.7.23.tar.bz2
2977b75cd8dacad187d11c10b867d56a vdr-1.7.22-1.7.23.diff
WARNING:
========
This is a developer version. Even though I use it in my productive
environment. I strongly recommend that you only use it under controlled
conditions and for testing and debugging.
From the HISTORY file:
- Removed the '.pl' suffix from svdrpsend.pl (sorry, I missed that one).
- Fixed bonding more than two devices.
- Fixed handling symbolic links in cRecordings::ScanVideoDir() (reported by
Sundararaj Reel).
- Fixed a memory leak in cRecordings::ScanVideoDir() in case there are too many
link levels (reported by Sundararaj Reel).
- Removed redundant memset() in the ctor of cSatCableNumbers (triggered by
Ville Skyttä pointing out that the argument sequence in the call was wrong).
- Removed a redundant NULL check in cDvbSpuDecoder::setTime() (thanks to Ville Skyttä).
- Added HasSnr to the DEBUG_SIGNALQUALITY output in cDvbTuner::GetSignalQuality()
(triggered by Ville Skyttä pointing out that the variable HasSnr was unused).
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Added support for HbbTV to libsi (thanks to Christoph Haubrich).
- Added support for devices with more than one delivery system per frontend.
This requires a DVB driver with version 5.5 or higher that can handle the
DTV_ENUM_DELSYS call. With older drivers it will fall back to one delivery
system per frontend.
- Updated the Hungarian language texts (thanks to István Füley).
- cDvbTuner::ExecuteDiseqc() now makes sure only one tuner sends SCR commands
at any given time (reported by Frank Neumann).
- cEvent::FixEpgBugs() now replaces any newline characters in stream component
descriptions with blanks (thanks to Torsten Lang for reporting a problem with
EPG data from BSkyB's "MTV MUSIC", S28.2E-2-2010-7012).
- Fixed cDvbSubtitleConverter::SetOsdData() (thanks to Rolf Ahrenberg).
- Fixed cListBase::Move() in case From and To are equal (reported by Sundararaj
Reel).
- Added support for DVB-T2 to libsi (thanks to Rolf Ahrenberg).
- Added support for handling DVB-T2 transponders. This requires a DVB driver
with version 5.3 or higher that can handle the DTV_DVBT2_PLP_ID call (thanks
to Rolf Ahrenberg).
- Fixed cConfig::Load() for g++ version 4.7.0 (thanks to Ville Skyttä).
- Fixed a possible memory corruption in cTsToPes::GetPes() in case of broken
TS packets, e.g. when switching channels.
- Fixed the SVDRP command CLRE for a single channel in case there are events
that have a timer (thanks to Timo Eskola).
- BIDI support now checks at runtime whether the system runs with UTF-8 (suggested
by Torsten Lang).
- Added member functions Adapter() and Frontend() to cDvbDevice (suggested by
Rolf Ahrenberg).
- The parameters that are only used by "second generation" delivery systems (DVB-S2
and DVB-T2) are no longer written into channels.conf for "first generation"
delivery systems (DVB-S and DVB-T).
- Changed IndexToHMSF() so that it can handle negative Index values.
- Added option -N to the msgmerge call in the Makefile, because fuzzy translation
mostly resulted in useless strings.
- The new setup option "Replay/Show remaining time" can be used to switch between
showing the total length or the remaining time of the recording that is currently
replayed.
- Fixed wrongfully displaying the length of a recording in the title of the replay
progress display.
- Fixed frozen live view with device bonding in case the bonded master is used for
live viewing (reported by Uwe Scheffler).
|
||
Klaus Schmidinger
|
bd61fee1e9 |
Version 1.7.19
Original announce message:
VDR developer version 1.7.19 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.19.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.18-1.7.19.diff
MD5 checksums:
1eb04ecdc2b11ab8641ebfaa2cb93f42 vdr-1.7.19.tar.bz2
db16ce7bb51e0db837ed56ef4744a67e vdr-1.7.18-1.7.19.diff
WARNING:
========
This is a developer version. Even though I use it in my productive
environment. I strongly recommend that you only use it under controlled
conditions and for testing and debugging.
This version introduces functions to determine the "signal strength"
and "signal quality" through cDevice. If you are using a DVB card that
contains an stb0899 frontend chip (like the TT-budget S2-3200) you may
want to apply the patches from
ftp://ftp.tvdr.de/vdr/Developer/Driver-Patches
to the LinuxDVB driver source in order to receive useful results from
that frontend.
Since apparently the various frontend drivers return different maximum
values in their FE_READ_SIGNAL_STRENGTH and FE_READ_SNR functions (some
deliver a value in the range 0x0000...0xFFFF, while others return values
as "dB/10" or "dBm/10" (the latter with an offset to make the value positive,
since the parameter is unsigned), the functions cDvbTuner::GetSignalStrength()
and cDvbTuner::GetSignalQuality() use the device's "subsystem ID" to
map these values into the range 0...100, which is the normalized return
value of these functions.
Take a look at these two functions and maybe remove the comment characters
from the lines
//#define DEBUG_SIGNALSTRENGTH
//#define DEBUG_SIGNALQUALITY
in dvbdevice.c to get some debug output if your device doesn't return any
directly useful values and may have to be added appropriately to the
'switch (subsystemId)' statement.
The channel display of the 'sttng' skin uses these values to implement
a signal strength/quality display.
From the HISTORY file:
- Fixed cString's operator=(const char *String) in case the given string is the
same as the existing one (thanks to Dirk Leber).
- Avoiding a gcc 4.6 compiler error in the skincurses plugin (thanks to Tobias Grimm).
- TsGetPayload() now checks if there actually is a payload in the given TS packet
(reported by Dirk Leber).
- Now sorting the source file names in the call to xgettext, to make sure the results
are not dependent on the sequence of the files.
Plugin authors may want to change the line containing the xgettext call in their
Makefile accordingly by changing "$^" to "`ls $^`".
- The primary device is now only avoided for recording if it is an old SD full
featured card. This is done through the new function cDevice::AvoidRecording().
- Subtitle PIDs are now also decrypted (thanks to Reinhard Nissl).
- Fixed a possible race condition in cDiseqc::Execute() (reported by Marco Göbenich).
The return value of cDiseqcs::Get() is now const, so plugin authors may need to
adjust their code if they use this function.
- The new functions cDevice::SignalStrength() and cDevice::SignalQuality() can be
used to determine the signal strength and quality of a given device (thanks to
Rolf Ahrenberg for some input on how to use BER and UNC values to generate a
"quality" value).
- The 'sttng' skin now displays two colored bars at the bottom of the channel display,
indicating the strength (upper bar) and quality (lower bar) of the received signal.
The number to the left of these bars indicates the actual device the current
channel is being received with.
- Fixed detecting frames in case the Picture Start Code or Access Unit Delimiter
extends over TS packet boundaries (reported by Johan Andersson).
In order to fix this, the semantics of cFrameDetector had to be changed a little.
See cRecorder::Action() and cIndexFileGenerator::Action() on how to use the new
cFrameDetector::NewPayload() function.
- The frame detector now only starts collecting PTS values after it has seen the
first I-frame, otherwise it might get MaxPtsValues values and stop analyzing
even though the incoming data is still garbage (reported by Derek Kelly).
- The info file of a recording is now only overwritten with a new fps value if
that new value is not the default value (thanks to Derek Kelly for reporting a
problem with the fps value being overwritten in case a recording was interrupted
and resumed, and the fps value could not be determined after resuming recording).
- The initial channel is now stored by the channel ID in the setup.conf file, in
order to avoid problems in case channels are reordered or deleted (reported by
Lars Bläser).
- Added support for "content identifier descriptor" and "default authority descriptor"
to 'libsi' (thanks to Dave Pickles).
|
||
|
Klaus Schmidinger
|
5619c0602b |
Version 1.7.17
- Updated the Estonian OSD texts (thanks to Arthur Konovalov). - Fixed following symbolic links in RemoveFileOrDir() (cont'd) (thanks to Steffen Barszus). - Changed the description of cDevice::GetSTC() to make it mandatory for devices that can replay. - Removed the check for positive STC values from cDvbSubtitleConverter::Action(). - Added cString::operator=(const char *String) (suggested by Antti Seppälä). - Some spelling fixes (thanks to Ville Skyttä). - Passing package name and version to xgettext (thanks to Ville Skyttä). - Made 'dist' target dependent on up to date *.po (thanks to Ville Skyttä). - Added Language and fixed Language-Team header of *.po (thanks to Ville Skyttä). - Updated the Lithuanian OSD texts (thanks to Valdemaras Pipiras). - Fixed detecting frames on channels that broadcast with 50 or 60 fps. This avoids artifacts during fast forward/rewind when replaying recordings from such channels. To fix the index of existing recordings from such channels, just delete the 'index' file of the recording and VDR will generate a new one the next time you play it. You should also change the line "F 25" to "F 50" in the 'info' file of that recording. - Added support for "registration descriptor" to 'libsi' and using it in pat.c (thanks to Rolf Ahrenberg). - Fixed unjustified log entries about changed channel pids (reported by Derek Kelly). - Added an include of VDR's 'Make.global' to libsi's Makefile (thanks to Rolf Ahrenberg). - Removed displaying the "contents" information from the "Classic VDR" and "ST:TNG Panels" skins, because it is often wrong and nothing but irritating. - Added typecasts to avoid gcc 4.5 warnings in switch statements on eKeys variables where additional 'k_...' flags are used. - Fixed inclusion of <stdarg.h> (thanks to Henning Heinold). - Changed "frame duration" to "frame rate" in vdr.5 (reported by Tobias Grimm). - Removing a cRemote from the Remotes list in case its initialization failed (thanks to Dominik Strasser). - Added LDFLAGS to the linker calls in the Makefiles (thanks to Joerg Bornkessel and Paul Menzel). - Now updating the 'frames per second' data in the list of recordings when a new recording is started that has a frame rate other than the default. - The include path to the freetype2 header files is now retrieved via a call to 'pkg-config --cflags freetype2' (suggested by Andreas Oberritter). - The OSD now has full TrueColor support. There can be several "pixmaps" that can be overlayed with alpha blending. All existing skins should work out of the box with the TrueColor OSD - the only exception being cOsd::GetBitmap(). Since the TrueColor OSD doesn't use bitmaps, this function will return a dummy bitmap, which may not be what the plugin expects. As long as this bitmap is only used for setting the palette, there is no problem. However, any other operations on this bitmap will have no effect. See the description of the cPixmap functions in osd.h for details about the new functionalities. The "ST:TNG Panels" skin has been enhanced to automatically use the TrueColor OSD if available. The "osddemo" plugin has been extended to show some of the possibilities of the TrueColor OSD if it is run on a system that actually provides TrueColor support. Thanks to Reinhard Nissl for some valuable input, help with debugging, and an implementation of the AlphaBlend() function. - Updated the Slovakian language texts (thanks to Milan Hrala). - Added Serbian language texts (thanks to Milan Cvijanovic). - Fixed reallocating memory in the "pictures" plugin (reported by Paul Menzel, with input from Oliver Endriss). - Fixed reallocating memory in cTsToPes::PutTs() (suggested by Oliver Endriss). - Now checking the result of all realloc() calls. - Fixed setting up the 'Recordings' menu in case there are several recordings with exactly the same name (reported by Marcus Hilbrich). - Setting the audio type of language descriptors to 0x00 in the PAT/PMT generator (thanks to Anssi Hannula). - Changed the compiler optimization flag to -O3, which gives quite a performance boost in the AlphaBlend() function. - While replaying, the editing marks are now updated every 10 seconds (based on a patch from Manuel Reimer). - Now reducing the thread and I/O priority cCuttingThread::Action() to make the foreground process more responsive (suggested by Frank Neumann). - Removed checking for minimum line length of 21 characters in the LIRC receiver code (reported by Gerald Dachs). - Updated the Romanian OSD texts (thanks to Lucian Muresan). - Now storing the original display size when handling DVB subtitles (thanks to Reinhard Nissl). - The original display size of subtitles is now used to scale them properly when displaying them on an HD OSD. |
||
|
Klaus Schmidinger
|
771986b89f |
Version 1.7.0
- Re-implemented handling of DVB-S2, which first appeared in version 1.5.14, but was revoked in version 1.5.15 in favor of making a stable version 1.6.0. VDR now requires the "multiproto" DVB driver, e.g. from http://jusst.de/hg/multiproto. Note that the channels.conf file now supports additional parameters, so you may want to make sure you have a backup of this file in case you need to go back to the previous version of VDR! - Fixed displaying transponder data when it is modified (thanks to Reinhard Nissl). - Fixed handling the counter in detection of pre 1.3.19 PS data (thanks to Reinhard Nissl). - Improved logging system time changes to avoid problems on slow systems under heavy load (suggested by Helmut Auer). - Now setting the thread name, so that it can be seen in 'top -H' (thanks to Rolf Ahrenberg). - Fixed initializing the timer's flags in the cTimer copy constructor (thanks to Andreas Mair). - Fixed setting the OSD level in the 'osddemo' example (thanks to Wolfgang Rohdewald). - Increased the time between checking the CAM status to 500ms to avoid problems with some CAMs (reported by Arthur Konovalov). |
||
|
Klaus Schmidinger
|
9f42c33ef6 |
Version 1.5.1
- Added cDevice::HasCi() so that devices with Common Interface can be avoided when tuning to an FTA channel, thus preserving the CAM resources even on budget DVB cards (suggested by Petri Helin). - Fixed i18n characters for the Hungarian texts (thanks to Thomas Günther). - Now using cPipe instead of popen() in cCommand::Execute() to avoid problems with open file handles when starting background commands (thanks to Reinhard Nissl). - Removed 'assert(0)' from cDvbSpuDecoder::setTime() (thanks to Marco Schlüßler). - Fixed a possible crash when loading an invalid XPM file (thanks to Martin Wache). - Updated satellite names in 'sources.conf' (thanks to Thilo Wunderlich). - Adapted 'libsi' to DVB-S2 (thanks to Marco Schlüßler). - Fixed handling error status in cDvbTuner::GetFrontendStatus() (thanks to Reinhard Nissl). - Shutdown handling has been rewritten (thanks to Udo Richter). - Plugins can now implement the new function WakeupTime() to request VDR to wake up at a particular time (thanks to Udo Richter). - The HUP signal now forces a restart of VDR (thanks to Udo Richter). - cThread::EmergencyExit() has been replaced by ShutdownHandler.RequestEmergencyExit(). - Several references to "button" in a remote control context have been changed to "key" (based on a report from Marko Mäkelä regarding the "Menu button closes" text). The "MenuButtonCloses" parameter in 'setup.conf' has therefore been renamed to "MenuKeyCloses", accordingly. This will result in an "unknown config parameter: MenuButtonCloses" error message in the log file, so you may want to remove that entry from your 'setup.conf' file. - Simplified the error handling in cDvbTuner::GetFrontendStatus() (based on a discussion with Reinhard Nissl). - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Increased the maximum number of DVB devices to 8 (thanks to Rolf Ahrenberg). - The new Setup parameter "Channel entry timeout" can be used to customize the time since the last keypress until a numerically entered channel number is considered complete, and the channel is switched (suggested by Helmut Auer). Setting this parameter to 0 turns off the automatic channel switching, and the user will have to confirm the entry by pressing the "Ok" key. |
||
|
Klaus Schmidinger
|
c49ca5abb7 |
Version 1.4.2-1
- Added LC_ALL to the checks for UTF-8 at startup (suggested by Matthias Schwarzott). - Fixed the cTimer::operator=() so that it won't mess up the cListObject's pointers (reported by Alexander Rieger). - Fixed a memory leak in the cTimer::operator=() when using the 'aux' string (reported by Alexander Rieger). - Fixed processing the PDCDescriptor in 'libsi' on big endian systems (thanks to Martin Ostermann). - Fixed handling relative volume settings that unmute the audio in the call to cStatus::MsgSetVolume() (reported by Oliver Endriss). |
||
|
Klaus Schmidinger
|
21f3eaf6c9 |
Version 1.4.0-3
- Fixed the PremiereContentTransmissionDescriptor in 'libsi' (thanks to Stefan Huelswitt). - Removed all the compatibility '#if APIVERSNUM...' stuff and instead increased the API version number - plugins will have to be recompiled. - Removed the call to pthread_setschedparam(childTid, SCHED_RR, 0) in thread.c, because it caused a compiler warning with post-2.4 glibc (reported by Ville Skyttä). Since the third parameter has to be non-null to have any effect, the call was presumably a NOP, anyway. - Fixed the 'clean-plugins' target in the Makefile to also remove additional plugin libraries (thanks to Wayne Keer). - Applied the fixes to moving and deleting channels from version 1.4.0-2 to the SVDRP commands MOVC and DELC as well. - Fixed handling the display of the '*' indicator in the "What's on now/next?" menu, so that events that haven't been "seen" in the data stream within 30 seconds won't be shown as "running". - Fixed handling tabbed item display in 'skincurses'. - Increased the column spacing in the "Recordings" menu (was too small for the 'skincurses' plugin). - When the 'skincurses' plugin is loaded, it automatically sets the 'curses' skin as the current one. This doesn't modify the Setup.OSDSkin parameter, so that after using 'skincurses' (for instance for debugging) the previously selected skin will be used again. - Added some log messages when setting the current skin. - Only making a second attempt to set the current skin at startup if the first attempt has failed. - Now switching to non-VPS timers' channels 60 seconds before the timer starts (if a free device is available), to allow for the updating of EPG data and CA descriptors before the actual recording starts. |
||
|
Klaus Schmidinger
|
293ed4027e |
Version 1.3.47
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Fixed a crash when setting the time transponder in the Setup menu, caused by the
new 'noneString' in cMenuEditChanItem (reported by Thomas Günther).
- Added NULL checks to some strdup() calls in menuitems.c (suggested by Darren
Salt).
- Removed the unnecessary 'value' member from cMenuEditItem.
- Fixed the initial setting of the time transponder setup parameter (reported
by Thomas Günther).
- Fixed unnecessary Set() calls in cMenuEditIntItem::ProcessKey().
- Allowing a tolerance for symbol rate values that are off by one (thanks to
Richard Lithvall).
- Added VBITeletextDescriptorTag, TeletextDescriptorTag, LocalTimeOffsetDescriptorTag
and PremiereContentTransmissionDescriptor to 'libsi' (thanks to Marco Schlüßler).
- Using geteuid() to check whether VDR is running as user 'root' (suggested by
Tobias Grimm).
- Added a missing "Key$" in skincurses.c (reported by Darren Salt).
- Reintroduced the log message "deleting plugin: ..." when shutting down VDR (upon
request by Ville Skyttä, as in the initial patch from Christoph Haubrich).
- Fixed the vdr.1 man page (a single DVB card can record and do live tv).
- The preferred audio language is now automatically selected when starting replay.
- Updated the Danish OSD texts (thanks to Mogens Elneff).
- The new function cPlugin::Active() can be used by a plugin to indicate that it
is still busy and the system should not shut down or restart (based on a patch
from Sascha Volkenandt). See PLUGINS.html for details.
- Fixed setting the 'Delta' parameter when calling the shutdown script with
no active timer (reported by Helge Lenz).
- In order to make sure that plugins are compiled with the same DVB driver header
files as VDR itself, the definition of DVBDIR has been removed from the VDR
Makefile. If you are using a driver version that has its header files at a location
other than /usr/include/linux/dvb, you can define DVBDIR in the Make.config
file (see also INSTALL). Note that if you already have a Make.config file of your
own, you should add the lines
ifdef DVBDIR
INCLUDES += -I$(DVBDIR)/include
endif
to its end, as in the new Make.config.template.
Any reference to DVBDIR should be removed from all plugins' Makefiles, like this:
------------------------------------------------------------
--- PLUGINS/src/hello/Makefile 2005/11/11 13:20:14 1.10
+++ PLUGINS/src/hello/Makefile 2006/04/15 11:58:46 1.11
@@ -20,7 +20,6 @@
### The directory environment:
-DVBDIR = ../../../../DVB
VDRDIR = ../../..
LIBDIR = ../../lib
TMPDIR = /tmp
@@ -40,7 +39,7 @@
### Includes and Defines (add further entries here):
-INCLUDES += -I$(VDRDIR)/include -I$(DVBDIR)/include
+INCLUDES += -I$(VDRDIR)/include
DEFINES += -D_GNU_SOURCE -DPLUGIN_NAME_I18N='"$(PLUGIN)"'
------------------------------------------------------------
Thanks to Marco Schlüßler for pointing out this problem.
- Implemented kNext and kPrev keys (based on a patch from Peter Juszack).
See MANUAL for details.
- Implemented kChanPrev (from a patch from Darren Salt).
- The "Update channels" parameter in the "Setup/DVB" menu has been extended to
allow updating only the PIDs (see MANUAL for details). When updating to this
version of VDR, please verify that the setting is as you want it to be, because
the values have been shifted.
- The new APIVERSION (see config.h) now allows existing compiled plugins to be
used with newer versions of VDR, as long as there have been no changes to the
VDR header files since the last APIVERSION. Existing plugins' Makefiles should
have all references to VDRVERSION changed to APIVERSION, like this:
------------------------------------------------------------
--- PLUGINS/src/hello/Makefile 2006/04/15 11:58:46 1.11
+++ PLUGINS/src/hello/Makefile 2006/04/16 09:03:50 1.12
@@ -28,9 +28,9 @@
-include $(VDRDIR)/Make.config
-### The version number of VDR (taken from VDR's "config.h"):
+### The version number of VDR's plugin API (taken from VDR's "config.h"):
-VDRVERSION = $(shell grep 'define VDRVERSION ' $(VDRDIR)/config.h | awk '{ print $$3 }' | sed -e 's/"//g')
+APIVERSION = $(shell sed -ne '/define APIVERSION/s/^.*"\(.*\)".*$$/\1/p' $(VDRDIR)/config.h)
### The name of the distribution archive:
@@ -67,7 +67,7 @@
libvdr-$(PLUGIN).so: $(OBJS)
$(CXX) $(CXXFLAGS) -shared $(OBJS) -o $@
- @cp $@ $(LIBDIR)/$@.$(VDRVERSION)
+ @cp $@ $(LIBDIR)/$@.$(APIVERSION)
dist: clean
@-rm -rf $(TMPDIR)/$(ARCHIVE)
------------------------------------------------------------
- If a timer is newly created from within the "Schedule" menu, and its event is
already running or has its start time within the next two minutes, it now goes
directly into the "Edit timer" menu in order to allow the user to make further
changes to timer parameters before the actual recording starts (inspired by
Christian Wieninger's "epgsearch" plugin).
- Added format check to syslog_with_tid().
- Updated the INSTALL file's section about non-VDR files in the video directory
(since version 1.3.38 disk access is done in a separate thread, so the watchdog
timer won't hit).
- Changed the behaviour of the "Use small font" setup option to *always* use the small
font if set to '2' - even if it would have been a fixed font (suggested by Ronny
Kornexl).
- No longer using characters 0x01 and 0x02 for mapping single quote and slash in
recording names (thanks to Patrick Fischer for reporting that this was a problem
with XML). The single quote is not mapped at all, and the slash is interchanged
with the tilde. Existing recordings will be handled like before, so there is
no need to actually rename them.
- The cRemote::CallPlugin() function now has a boolean return value that tells
the caller whether initiating the plugin call was successful (suggested by
Reinhard Nissl). If it returns false, another plugin call is currently pending
and the caller should try again later. This also means that the SVDRP command
PLUG can now return an error code is the call fails.
- The new function cPlugin::MainThreadHook() can be used by plugins to perform
actions in the context of the main program thread. Use this function with great
care and only of you absolutely have to! See also PLUGINS.html.
|
||
|
Klaus Schmidinger
|
d5c85f5ff8 |
Version 1.3.32
- Added some missing braces in remux.c (thanks to Wayne Keer for reporting this one). - Removed unused MAINMENUENTRY from svdrpdemo.c (thanks to Udo Richter for reporting this one). - Fixed appending sequence end code in cDvbPlayer::Goto() (thanks to Reinhard Nissl). - Fixed syncing in cRepacker (thanks to Reinhard Nissl). - Now always using stream id 0xE0 for the video stream, to avoid problems with post processing tools that choke on different ids (suggested by Reinhard Nissl). - Updated the Estonian OSD texts (thanks to Arthur Konovalov). - Fixed cDvbPlayer::SkipFrames() to properly handle radio recordings (thanks to Reinhard Nissl). - Updated the Swedish OSD texts (thanks to Tomas Prybil). - Updated the Slovenian OSD texts (thanks to Matjaz Thaler). - Updated the Danish OSD texts (thanks to Mogens Elneff). - Made LIRC command parsing more robust (thanks to Ville Skyttä). - Introduced a separate 'plugins-install' target in the Makefile (thanks to Daniel Thompson). - Re-introduced the code that waits for a tuner lock in VDR/device.c, since apparently some users actually need it. It's not active by default, you'll have to define the WAIT_FOR_TUNER_LOCK macro in that file if you need it (suggested by Malcolm Caldwell). - Adjusted the Makefile to the dvb-kernel driver on kernel 2.6 and up (thanks to Lauri Tischler). - Repeat keys are now ignored when waiting for a keypress to cancel an operation (thanks to Marko Mäkelä). - The main menu function of a plugin can now be activated through a key macro of the form "@plugin" even if that plugin doesn't have a main menu entry (using part of a patch by Hardy Flor, which originally implemented calling plugins from SVDRP). - The menu timeout handling is now done centrally in the main program loop. - Added missing help for the 'help' keyword in the SVDRP command PLUG. - The main menu function of a plugin can now be called programmatically through the static function cRemote::CallPlugin(). - The SVDRP command PLUG now has a new option 'main' which can be used to initiate a call to the main menu function of a plugin (using part of a patch by Hardy Flor). - The new command line option '--vfat' can be used to make VDR encode special characters in recording file names, even if it wasn't compiled with VFAT=1 (suggested by Peter Bieringer). The compile time option VFAT still exists and creates a VDR that always behaves as if it were called with '--vfat'. - Replaced the ':' delimiter between hour and minute in recording file names with a '.' under Linux, too. Existing recordings with ':' as delimiter will still work. - Implemented the SVDRP command MOVC (thanks to Andreas Brachold). - Added support for multiple audio language codes in ISO639LanguageDescriptors to 'libsi' (thanks to Marcel Wiesweg). - Changed the audio PID language codes to hold up to two 3 letter codes, separated by '+', to store separate languages broadcast in two channel audio mode. - If the preferred audio language is broadcast on a PID that has two different languages in the two stereo channels, the audio channel is now properly set when switching to such a channel (thanks to Mogens Elneff for his help in testing this). - Fixed some typos in MANUAL (thanks to Ville Skyttä). - Fixed the default value for "Setup/EPG bugfix level" (thanks to Ville Skyttä for reporting this one). - Fixed defining timers that only differ in the day of week (thanks to Patrick Rother for reporting this one). - Fixed converting summary.vdr files that would result in a very long 'short text' (thanks to Carsten Koch). - Implemented a hash for the channels to reduce the system load in the EIT scanning thread (based on a patch by Georg Acher). |
||
|
Klaus Schmidinger
|
5a4eb3f104 |
Version 1.3.5
- Fixed reading the EPG preferred language parameter from 'setup.conf'. - Fixed switching to a visible programme in case the current channel has neither a video nor an audio PID. - Fixed editing channels (SID now range checked) and creating new channels (NID, TID and RID are now set to 0). - Fixed transponder handling to make it work with satellites that provide two transponders on the same frequency, with different polarization, like Hispasat at S30.0W (thanks to Thomas Bergwinkl for pointing this out). See man vdr(5) for details about the enhanced channel ID format. - Since there appears to be no general solution for the UPT error yet, a recording now initiates an "emergency exit" if the number of UPT errors during one recording exceeds 10 (suggested by Gregoire Favre). Since the UPT error doesn't happen on my system, this has not been explicitly tested. The "preliminary fix" for the UPT error in VDR/dvbdevice.c has been disabled by default, since it makes channel switching unpleasently slow. If you want to have that workaround back, you can uncomment the line //#define WAIT_FOR_LOCK_AFTER_TUNING 1 in VDR/dvbdevice.c. - Adapted the 'sky' plugin to use the actual channel IDs, and to fetch EPG data from www.bleb.org. - Limited automatic retuning to devices that actually provide the transponder (necessary for the 'sky' plugin). - Fixed handling receivers in the 'sky' plugin, so that a recording on the same channel won't interrupt an ongoing Transfer Mode. - Added subtable ID and TSDT handling to 'libsi' (thanks to Marcel Wiesweg). - Fixed some Russian OSD texts (thanks to Vyacheslav Dikonov). - Added the 'running status' to the EPG events. This is necessary for implementing the VPS function for recording. - Removed the obsolete 'present' and 'following' handling from the EPG data. - The EPG data is now always kept sorted chronologically in the internal data structures. This also means that any EPG data retrieved through the SVRDP command LSTE is guaranteed to be sorted by start time. - Now using the 'running status' in the channel display, so that a programme that has an end time that is before the current time, but is still running, will still be shown in the display (provided the broadcasters handle the 'running status' flag correctly). This also applies to programmes that have a start time that is in the future, but are already running. - Implemented an "EPG linger time", which can be set to have older EPG information still displayed in the "Schedule" menu (thanks to Jaakko Hyvätti). - Added PDCDescriptor handling to 'libsi'. - Implemented handling the VPS timestamps (aka "Programme Identification Label") for full VPS support for timers (provided the tv stations actually broadcast this information). The VPS time is displayed in the event info page if it exists and is different than the event's start time. - Extended the SVDRP command LSTE to allow limiting the listed data to a given channel, the present or following events, or events at a given time (thanks to Thomas Heiligenmann). - Fixed a typo in libsi/si.h (thanks to Stéphane Esté-Gracias). - Timers can now be set to use the VPS information to control recording a programme. The new setup options "Recording/Use VPS" and "Recording/VPS margin", as well as the "VPS" option in the individual timers, can be used to control this feature (see MANUAL for details). Note that this feature will certainly need a lot of testing before it can be called "safe"! - The "Schedule" and "What's on now/next?" menus now have an additional column which displays information on whether there is a timer defined for an event, whether an event has a VPS time that's different than its start time, and whether an event is currently running (see MANUAL under "The "Schedule" Menu" for details). |
||
|
Klaus Schmidinger
|
93a94b18b5 |
Version 1.3.0
- Changed thread handling to make it work with NPTL ("Native Posix Thread Library").
Thanks to Jon Burgess, Andreas Schultz, Werner Fink and Stefan Huelswitt.
- The cThread class now accepts a 'Description' parameter, which is used to log
the beginning and end of the thread, together with its process and thread id.
For descriptions that need additional parameters you can use the function
cThread::SetDescription(), which accepts 'printf()' like arguments.
Existing plugins that use threads should be changed to use this functionality
instead of explicit 'dsyslog()' calls inside their Action() function in order
to support logging the thread ids.
- Added "Slovak Link" and "Czech Link" to 'ca.conf' (thanks to Emil Petersky).
However, 'ca.conf' is now pretty much obsolete due to the automatic CA handling.
- Mutexes are now created with PTHREAD_MUTEX_ERRORCHECK_NP, which makes the
'lockingTid' stuff obsolete (thanks to Stefan Huelswitt).
- Changed font handling to allow language specific character sets.
- Adopted the small font character set from the "Elchi" patch (originally
provided by Alessio Sangalli).
- Greek language texts now use iso8859-7 character set (thanks to Dimitrios
Dimitrakos).
- Rearranged section data handling, so that the actual data handling can be done
separately, even from within plugins.
- The EPG data structures have been moved from eit.[hc] to epg.[hc] and have been
adapted to the general VDR coding style. Plugins that use these data structures
may need to change some function names (which should be obvious).
The name 'subtitle' has been changed to 'shortText' to avoid clashes with actual
subtitles that are part of a movie. The name 'extendedDescription' has been
shortened to 'description'.
- Replaced 'libdtv' with 'libsi' (thanks to Marcel Wiesweg), which is thread
safe and can be used by multiple section filters simultaneously.
- Added 'cRwLock' to 'thread.[hc]'. Note that all plugin Makefiles need to
define _GNU_SOURCE for this to work (see the example plugin Makefiles and
'newplugin').
- Fixed a problem with crc32 in SI handling on 64bit systems (thanks to Pedro
Miguel Sequeira de Justo Teixeira for reporting this one).
- Fixed an alignment problem in CAM access on 64bit systems (thanks to Pedro
Miguel Sequeira de Justo Teixeira for reporting this one).
- Added 'StreamType' setting to CAM communication, which is important for
Aston/SECA CAMs (thanks to Antonino Sergi).
- Now the CA descriptors are sent to the CAM in the 'program' or 'ES level'
sections, depending on where they are found in the PMT (thanks to Hans-Peter
Raschke for reporting this one). This should make SkyCrypt CAMs work.
- Now using the 'version number' of EPG events to avoid unnecessary work.
- Channel data is now automatically derived from the DVB data stream (inspired
by the 'autopid' patch from Andreas Schultz).
- The current channel is now automatically re-tuned if the PIDs or other settings
change. If a recording is going on on a channel that has a change in its
settings, the recording will be stopped and immediately restarted to use the
new channel settings.
- EPG events now use the complete channel ID with NID, TID and SID.
- Channel names in 'channels.conf' can now have a short form, as provided
by some tv stations (see man vdr(5)). Currently channels that provide short
names in addition to long ones are listed in the OSD as "short,long name",
as in "RTL,RTL Television". The short names will be used explicitly later.
- The Ca parameter in 'channels.conf' has been extended and now contains all the
CA system ids for the given channel. When switching to a channel VDR now tests
for a device that provides one of these CA system ids. The devices automatically
get their supported ids from the CI handler.
- The values in 'ca.conf' are currently without any real meaning. Whether or not
a channel with conditional access can be received is now determined automatically
by evaluating its CA descriptors and comparing them to the CA system ids
provided by the installed CAM. Only the special values 1-16 are used to assign
a channel to a particular device.
- Increased the maximum number of possible OSD colors to 256.
- Limited the line length in the EPG bugfix report, which appears to fix a buffer
overflow that caused a crash when cleaning up the EPG data (at 05:00 in the
morning).
|