- Made VDR compile with libdvdread-0.9.1 (thanks to Andreas Schultz).
Note that you now _need_ version 0.9.1 of libdvdread to compile VDR with
DVD support!
- Several fixes to the replay mode display (thanks to Stefan Huelswitt):
no more replay mode display when pressing the "Green" or "Yellow" button
(Skip +/-60s); fixed timeout when pressing '0' to set an editing mark while
the progress display is not shown; mode display is shown after progress
display is closed; pressing "Ok" while the mode display is on brings up
the progress display; no more unnecessary display of "normal play mode".
- Supplying the new frontend parameter 'Inversion' (currently it is always
set to INVERSION_AUTO, which should work with all channels on Astra).
- Removing unnecessary double quotes from EPG Subtitle in EPGBugfixLevel >=1.
- EPG info is now updated if the contents changes but the ID remains the same.
- Fixed handling SVDRP commands whith more than one blank between the command
word and the options.
- The current volume setting is now saved to setup.conf and restored at the
next program start.
- New command line option '-r' to define a command that gets called before and
after each recording (see INSTALL for details).
- Implemented a check to see whether the system time is running linearly.
- Writing the current time (as seen by VDR) into the log file when starting
a timer recording (this may help debugging cases where timers don't start
at the expected time).
- Made the volume, mute and power keys work when a menu is active, too (thanks
to Matthias Weingart).
- Implemented automatic shutdown (see INSTALL and MANUAL for details).
- New SVDRP command NEXT to show the next timer event.
- The new remote control key "Power" can be used to turn the VDR machine
off (this requires the presence of the '-s' option).
- Fixed code for the default "Ok" button on the PC keyboard (was 0x162 on
the "good old" keyboards (with the F-keys at the left side), while it changed
to 0x15E on the newer keyboards).
- When a recording is edited, the summary information (if present) is now
also copied.
- When a recording is running on the primary interface, any attempt to change
the current channel will now lead to a "Channel locked" message.
- The main program loop now first checks whether any timer recordings are
finished, before starting a new timer recording. This is important in case
one timer ends at the same time another timer starts.
- New setup parameter OSDMessageTime to define how long an OSD message shall
be displayed.
- The "File" parameter of a timer can now contain the '~' character to store
the recording in a hierarchical directory structure. The '~' character has
been chosen since the file system's directory delimiter '/' may be part of
a regular programme name (showing the directory hierarchy in the "Recordings"
menu will follow later).
- Repeating timers now create recordings that contain the 'Subtitle' information
from the EPG data in their file name. Typically (on tv stations that care
about their viewers) this contains the episode title of a series. The
subtitle is appended to the timer's file name, separated by a '~' character,
so that it results in all recordings of this timer being collected in a
common subdirectory. You can disable this with the 'UseSubtitle' parameter
in the "Setup" menu.
- The summary information is now taken from the EPG data at the actual time of
recording (no longer at the time the timer is created in the "Schedule" menu).
If a timer already has summary data, that data will be used. If you have
repeating timers in your 'timers.conf', you may want to make sure they do
NOT contain any summary information (that's the last field in the timer
definitions). Use your favourite text editor to delete that information.
That way every recording will store the actual summary data at the time of
the recording.
- Added Norwegian language texts (thanks to Jørgen Tvedt).
- Increased the usleep value in cDvbOsd::Cmd() to 5000 in order to work on
systems with the KURT/utime-patch (thanks to Guido Fiala).
- Changed the check whether the driver is loaded in runvdr to check for the
'dvb' module (the last one loaded).
- Fixed repeat function with LIRC (thanks to Stefan Huelswitt).
- Increased the upper limit for the symbol rate to 30000 (thanks to Ulrich
Röder).
- Made the position of the channel display configurable (thanks to Stefan
Huelswitt).
- Made the width and height of the OSD configurable (thanks to Stefan Huelswitt).
- DiSEqC support can now be generally enabled/disabled in the Setup menu. This
may be necessary if your multiswitch gets irritated by the default DiSEqC
codes '0' (thanks to Markus Lang).
- Fixed replaying in case there is no index file.
- Fixed jumping to an editing mark when replay has been paused.
- Avoiding unnecessary code execution in the replay progress display (thanks
to Guido Fiala).
- When entering time values the digits that still have to be entered are now
shown as '-' (as in "1-:--").
- When setting an editing mark while the progress display is not active, the
display will now be turned on for a short while to indicate the successful
setting of the mark.
- Updated 'channels.conf' for Premiere World (thanks to Helmut Schächner).
Check your timers if you use this channels.conf file, since the sequence of
several PW channels has been changed.
- Changed the color of "Info" messages to "black on green" and that of the
confirmation messages (like "Delete...") to "black on yellow".
- Fixed display with DEBUG_OSD (it still crashes sometimes, esp. when replaying,
but I can't seem to find what causes this... any ideas anybody?).
- Avoiding audio/video distortions in 'Transfer Mode' by no longer actually
tuning the primary interface (which can't receive this channel, anyway).
Apparently the driver gets irritated when the channel is switched and a
replay session is started immediately after that.
- Increased timeout until reporting "video data stream broken" when recording.
- Explicitly switching back to the previously active channel after ending a
replay session (to have it shown correctly in case it was in 'Transfer Mode').
- Fixed 'Transfer Mode' in cases where a non-primary interface was switched to
a channel that only the primary interface can receive (which could happen in
the EPG scanner).
- The EPG scanner now starts with the first channel (it used to start with the
second channel).
- Reacitvated setting the PNR.
- Adapted the frame scanning to the new muxing of the driver.
- The new compile time option REMOTE=NONE can be used to compile VDR without
any remote control support (for applications where it shall be controlled
exclusively via SVDRP).
- The new command line option -D can be used to define which DVB interfaces
a certain instance of VDR shall use.
- The "Left" and "Right" keys are now used to page up and down in lists (thanks
to Martin Hammerschmid). Since the "Timers" menu already uses these keys to
(de)activate timers, this functionality is not available there.
- The "Main" and "Commands" menu now support "hotkeys", which means that if the
first non-blank character of a menu item is a digit in the range 1..9, that
item can be selected by pressing the respective numeric key on the remote
control.
- The channel data in 'channels.conf' now contains the teletext PID (thanks to
Dave Chapman). Existing files will be read normally (and the teletext PID set
to 0), but once they are written back (due to some channel editing) the file
will have the new format.
- The EPG scanner now scans each transponder only once per cycle.
- Deleted recordings are now automatically removed from disk after a while (not
only when disk space is being needed for a new recording).
- Fixed repeat function in LIRC remote control.
- Changed the MAXDVBAPI macro in dvbapi.c to 4 in order to directly support the
maximum possible number of DVB cards.
- The 'Ca' parameter in the default 'channels.conf' has been changed from '2'
to '3' because the VDR prototype now has 3 DVB cards (and currently the CAM
module only works if it is inserted into the last DVB card).
- The "Now", "Next" and "Schedule" menus now remember the current channel and
restore the list when switching between them.
- The "Green" button in the "Recordings" menu can now be used to rewind a
recording and play it from the very beginning.
- Fixed handling ':' in timer filenames and '\n' in timer summaries (see FORMATS).
- When removing recordings empty directories are now removed from the video
directory.
- Added the "schnitt" tools from Matthias Schniedermeyer.
- New SVDRP command MESG to display a short message on the OSD.
- The Perl script 'svdrpsend.pl' can be used to send SVDRP commands to VDR.
- SVDRP can now immediately reuse the same port if VDR is restarted.
- SVDRP now has a timeout after which the connection is automatically closed
(default is 300 seconds, can be changed in "Setup").
- The compile time switch VFAT can be used to make VDR avoid the ':' character
in file names (VFAT can't handle them). Do 'make VFAT=1' to enable this.
- Support for DVB-C (thanks to Hans-Peter Raschke and Peter Hofmann).
See the INSTALL file for more information about the use of VDR with cable.
- Fixed an occasional segfault in the EIT processor.
- A value of '0' for the EPGScanTimeout setup parameter now completely turns off
scanning for EPG data on both single and multiple card systems.
- New setup parameter "PrimaryLimit" that allows to prevent timers from using the
primary DVB interface in multi card systems. Default value is 0, which means
that every timer may use the primary interface.
- The 'active' field of a timer will now be explicitly set to '1' if the user
modifies an active timer (see FORMATS for details).
- The new command line option -w can be used to activate a watchdog that makes
VDR exit in case the main program loop does not respond for more than the
given number of seconds. This is mainly useful in combination with the new
'runvdr' script that restarts VDR in case is has exited.
- VDR now requires driver version 0.8.1 or higher.
- Recordings are now saved in PES mode. Note that you now need to install the
driver *WITHOUT* 'outstream=0'! This is the default when you 'make insmod' in
the DVB/driver directory.
Old recordings (in AV_PES mode) can still be replayed (as long as the driver
still supports replaying AV_PES files). The only limitation with this is that
in fast forward/back mode the picture may be slightly distorted and there may
be sound fragments.
- The EPG data is now dumped into the file /video/epg.data every ten minutes.
Use the Perl script 'epg2html.pl' to convert the raw EPG data into a simple
HTML programme listing.
- Fixed handling of channel switching with the "Blue" button in the "What's on
now/next?" menus.
- Fixed saving the MarginStop setup parameter.
- Fixed missing initialization in cConfig.
- Implemented "On Disk Editing".
- There is no more default 'timers.conf' file.
- Added Italian language texts (thanks to Alberto Carraro).
- Fixed starting a replay session when the program is currently in "transfer
mode".
- Fixed setting/modifying timers via SVDRP with empty summary fields.
- Fixed a problem with recordings that have a single quote character in their
name (this is now mapped to 0x01).
- Changed the value for Diseqc to '0' in the default 'channels.conf'.
- Fixed displaying channels and recording status in the RCU's LED display when
a recording is interrupted due to higher priority.
- Implemented safe writing of config files (first writes into a temporary file
and then renames it).
- In case the video data stream is broken the log message will come only every
5 seconds.
- The current channel is now saved in the 'setup.conf' file when VDR is cancelled,
and will be restored next time it is started (thanks to Deti Fliegl).
- The EIT scanning thread is now locked when switching channels to avoid problems.
- Encrypted channels can now be selected even without knowing the PNR (however, it
is still necessary for the EPG info).
- Modified LIRC interface to better handle repeat function.
- Faster OSD by first writing into a bitmap and then sending the entire bitmap
to the DVB driver at once (requires the patch 'dvb.c.071.diff' to be applied
against the version 0.71 DVB driver file 'dvb.c').
- When switching channels the channel is now immediately displayed, and the
current/next information is shown as soon as it becomes available.
- No longer displaying the year in the 'Recordings' menu to saves space for the
title.
- The 'Recordings' menu now displays a '*' to indicate new recordings.
- Added the description of the timers.conf file to the FORMATS file (thanks to
Bastian Guse).
- Displaying as much as possible of the current/next info (dropping characters
that would display only partially).
- In normal viewing mode the '0' key now toggles between the current and the
previous channel.
- When scrolling through a list it now moves a full page up or down when the
cursor reaches the top or bottom of the menu (thanks to Heino Goldenstein!).
- Added missing '#include <sys/stat.h>' to recording.c.
- The video directory can now be defined with the command line option -v.
- There can now be more than one video directory (in case you have several
disks).
- Fixed learning key codes for PC keyboard.
- New command line option '-l' to set the log level.
- Times in timers.conf are now always printed with 4 digits (leading '0').
- Slow forward/back mode (thanks to Guido Fiala!).
- The "Up" key in replay mode no longer restarts replay at the very beginning,
but rather resumes normal replay mode after a "pause", "forward" or "backward"
operation. Use the "Skip -60s" function repeatedly to go back to the beginning
of the recording.
- Improved reaction on user input in fast/slow forward/back modes.
- No more upper limit for the value of 'Pnr'.
- Checking if the video card is really a DVB card.
- New SVDRP command UPDT to update an existing timer (or add a new one if it
doesn't yet exist).
- New version of the 'epg2timers' tool (with a modified channel list).
- Bugfix in closing window in DEBUG_OSD mode.
- Added support for LIRC remote control (thanks to Carsten Koch!).
There are now three different remote control modes: KBD (PC-Keyboard), RCU
and LIRC. See the INSTALL file for information on how to enable either of
these modes. The default mode is now KBD, not RCU as before (to make it
work immediately even if there is no actual remote control).
- Fixed small bug in dvbapi.c that was causing some channels (many on hotbird)
not to be correctly tuned (thanks to Plamen Ganev!).
- Now clearing the replay buffer in search forward/back, which results in
faster reaction.
- The 'Recordings' menu is now listed alphabetically (thanks to Carsten Koch!).
- The new 'epg2timers' tool (thanks to Carsten Koch!) can be used to convert
an EPG "merkliste" page (http://www.tvtv.de) to vdr timer entries.
- The new 'xtvrc2vdr' tool (thanks to Plamen Ganev!) can be used to convert
'xtvrc' channel files into 'vdr' format.
- When more than one timer matches at the same time, the first one in the list
with the highest 'Priority' is selected.
- The MANUAL section on "Programming the Timer" has been filled in.
- The year in the "Recordings" menu as well as in the progress display during
replay has been reduced to 2 digits to allow more space for the recording's
title. In the internal file structure the year is still stored with 4 digits,
so there will be no problem at the next turn of the century ;-)
- Channel names and timer filenames can now contain blanks. To avoid problems
with file names that contain blanks, all blanks in recording file names are
converted to underscores.
- The polarization can now be given in uppercase or lowercase characters in
channels.conf.
- Fixed buffer initialization to work with DVB driver version 0.6.
- Implemented the "Simple Video Disk Recorder Protocol" (SVDRP) to control
the VDR over a network connection.
- Implemented command line option handling.
- The program can now run in full background mode by using the --daemon option.
- Added a "summary" field to the timers (thanks to Carsten Koch!).
This field can contain a descriptive text of the programme and will be
displayed when the "Blue" key is pressed on a recording that was created by
this timer. If the text contains the special character '|', a newline will
be inserted at that place. When pressing "Ok" on a timer that contains a
summary field, the summary will be displayed. To edit such a timer the "Red"
key must be pressed. Timers without a summary still go into Edit mode when
pressing "Ok". The summary field can only be filled in directly by editing
the 'timers.conf' file with a text editor, or by defining/modifying the timer
via the SVDRP interface.
- Changed name from 'osm' to 'vdr' to avoid mixups with the 'oms' program that
appears to be in use with DVD replay.
- Implemented a channel display in the top menu line.
- Implemented replay progress display (press "Ok" when replaying to bring it up).
- Implemented direct channel selecting by pressing the numeric keys.
- Added several 'const' keywords to please stricter compilers.
- The repeat function for the remote control no longer adapts dynamically
to the timing of the RCU (this sometimes caused the repeat function to
kick in too early).
- Channel selection is now blocked when recording or replaying.
- Improved process handling.
- Actual record/replay now works.
- Dropped the idea of different "recording qualities" (a 36GB harddisk is
able to store some 18 hours in full quality, so we don't really need that).
- Termination signals are now caught and the program cleans up before exiting.
- Support for CICAM.
- Fixed compilation with only DEBUG_REMOTE=1.
- Menus now use colors.
- Support for "Red", "Green", "Yellow", "Blue" buttons.
- Channels and Timers can now be added, deleted and moved.
- Basic record/play file handling support (no actual record/playback yet).
