vdr/config.h
Klaus Schmidinger 217fcb2680 Version 1.0.0pre4
- Added 'Ca' code 201 for 'Cryptoworks, GOD-DIGITAL' to 'ca.conf' (thanks to
  Bernd Schweikert).
- Fixed avoiding the primary DVB interface in case Setup.PrimaryLimit is 0.
- Fixed handling CICAM settings if the first one of a DVB card was FTA.
- Fixed reacting on changes in CICAM settings (needed to restart VDR before).
- The "Blue" button in the "Main" menu now works as "Stop" button if a recording
  is currently being replayed.
- New command line option '-m' to mute audio of the primary DVB device at
  startup (suggested by Mirko Günther).
- The new SVDRP command VOLU can be used to control the audio volume (suggested
  by Mirko Günther).
- Fixed resetting 'mute' state when setting the volume to a non-zero value.
- Added log messages when deleting recordings in case the disk runs full while
  recording.
- Fixed closing a pipe (used for replaying Dolby Digital audio), which
  sometimes left 'zombie' processes behind (thanks to Werner Fink for helping
  to debug this one).
- Now starting the Dolby Digital output thread only if the recording actually
  contains Dolby Digital audio data (thanks to Werner Fink).
- Implemented OSD for Volume and Mute (works only if there is no other OSD
  activity, but this should be no problem for normal use).
- Changed the MANUAL description of the "Conditional Access" setup parameters
  to reflect the actual "CICAM DVBn m" notation in the "Setup" menu.
- The new Setup parameter "Use time from transponder" can be used to define which
  transponder shall be used to set the system time (see MANUAL for details).
  If you have been using the SetSystemTime option previously, you now MUST
  select a channel that you trust to have a reliable time base.
- Grouped the Setup parameters into several sub-menus, so that each group of
  parameters fits on a single screen - unless the height of the OSD has been
  set to a small value (based on code from Markus Lang).
- Changed the title of the "Main" menu to "VDR".
- Fixed displaying a system message while the replay mode is being shown.
- Physically removing a deleted recording if one with the same name shall be
  deleted again.
- The "Left" and "Right" keys are now used to page up and down in text displays
  (like the EPG descriptions or the results of commands executed from the
  "Commands" menu).
- Fixed high CPU usage in transfer mode.
- Replaced 'killproc' with 'killall' in 'runvdr', since apparently 'killproc'
  is not available by default on some Linux distributions, whereas 'killall' is.
  Please check if your system provides 'killall' - if it doesn't, please change
  this back in 'runvdr' and report this (thanks to Achim Lange).
- The "Commands" menu now automatically assigns number keys as hotkeys to the
  commands. If you have preceeded your commands with digits you may want to
  remove these from your 'commands.conf' file.
- The new Setup item "Restart" can be used to force a complete restart of VDR,
  including reloading the driver. Note that this can only work if VDR and the
  driver are wrapped into a mechanism that actually performs this action if VDR
  exits. The 'runvdr' script can be used for this purpose.
- Refined texts of the "Setup" menu.
2002-03-17 18:00:00 +01:00

376 lines
9.1 KiB
C++

/*
* config.h: Configuration file handling
*
* See the main source file 'vdr.c' for copyright information and
* how to reach the author.
*
* $Id: config.h 1.105 2002/03/17 14:24:11 kls Exp $
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#include <arpa/inet.h>
#include <stdio.h>
#include <string.h>
#include <time.h>
#include <unistd.h>
#include "dvbapi.h"
#include "eit.h"
#include "tools.h"
#define VDRVERSION "1.0.0pre4"
#define MAXPRIORITY 99
#define MAXLIFETIME 99
#define MINOSDWIDTH 40
#define MAXOSDWIDTH 56
#define MINOSDHEIGHT 12
#define MAXOSDHEIGHT 21
enum eKeys { // "Up" and "Down" must be the first two keys!
kUp,
kDown,
kMenu,
kOk,
kBack,
kLeft,
kRight,
kRed,
kGreen,
kYellow,
kBlue,
k0, k1, k2, k3, k4, k5, k6, k7, k8, k9,
kPower,
kVolUp,
kVolDn,
kMute,
kNone,
// The following flags are OR'd with the above codes:
k_Repeat = 0x8000,
k_Release = 0x4000,
k_Flags = k_Repeat | k_Release,
};
// This is in preparation for having more key codes:
#define kMarkToggle k0
#define kMarkMoveBack k4
#define kMarkMoveForward k6
#define kMarkJumpBack k7
#define kMarkJumpForward k9
#define kEditCut k2
#define kEditTest k8
#define RAWKEY(k) (eKeys((k) & ~k_Flags))
#define ISRAWKEY(k) ((k) != kNone && ((k) & k_Flags) == 0)
#define NORMALKEY(k) (eKeys((k) & ~k_Repeat))
#define MaxFileName 256
struct tKey {
eKeys type;
char *name;
unsigned int code;
};
class cKeys {
private:
char *fileName;
public:
unsigned char code;
unsigned short address;
tKey *keys;
cKeys(void);
void Clear(void);
void SetDummyValues(void);
bool Load(const char *FileName = NULL);
bool Save(void);
eKeys Translate(const char *Command);
unsigned int Encode(const char *Command);
eKeys Get(unsigned int Code);
void Set(eKeys Key, unsigned int Code);
};
#define ISTRANSPONDER(f1, f2) (abs((f1) - (f2)) < 4)
class cChannel : public cListObject {
private:
static char *buffer;
static const char *ToText(cChannel *Channel);
public:
enum { MaxChannelName = 32 }; // 31 chars + terminating 0!
char name[MaxChannelName];
int frequency; // MHz
char polarization;
int diseqc;
int srate;
int vpid;
int apid1, apid2;
int dpid1, dpid2;
int tpid;
int ca;
int pnr;
int number; // Sequence number assigned on load
bool groupSep;
cChannel(void);
cChannel(const cChannel *Channel);
const char *ToText(void);
bool Parse(const char *s);
bool Save(FILE *f);
bool Switch(cDvbApi *DvbApi = NULL, bool Log = true);
};
enum eTimerActive { taInactive = 0,
taActive = 1,
taInstant = 2,
taActInst = (taActive | taInstant)
};
class cTimer : public cListObject {
private:
time_t startTime, stopTime;
static char *buffer;
static const char *ToText(cTimer *Timer);
public:
bool recording, pending;
int active;
int channel;
int day;
int start;
int stop;
//TODO VPS???
int priority;
int lifetime;
char file[MaxFileName];
time_t firstday;
char *summary;
cTimer(bool Instant = false);
cTimer(const cEventInfo *EventInfo);
virtual ~cTimer();
cTimer& operator= (const cTimer &Timer);
bool operator< (const cTimer &Timer);
const char *ToText(void);
bool Parse(const char *s);
bool Save(FILE *f);
bool IsSingleEvent(void);
int GetMDay(time_t t);
int GetWDay(time_t t);
bool DayMatches(time_t t);
static time_t IncDay(time_t t, int Days);
static time_t SetTime(time_t t, int SecondsFromMidnight);
char *SetFile(const char *File);
bool Matches(time_t t = 0);
time_t StartTime(void);
time_t StopTime(void);
void SetRecording(bool Recording);
void SetPending(bool Pending);
void SkipToday(void);
const char *PrintFirstDay(void);
static int TimeToInt(int t);
static int ParseDay(const char *s, time_t *FirstDay = NULL);
static const char *PrintDay(int d, time_t FirstDay = 0);
};
class cCommand : public cListObject {
private:
char *title;
char *command;
static char *result;
public:
cCommand(void);
virtual ~cCommand();
bool Parse(const char *s);
const char *Title(void) { return title; }
const char *Execute(void);
};
typedef uint32_t in_addr_t; //XXX from /usr/include/netinet/in.h (apparently this is not defined on systems with glibc < 2.2)
class cSVDRPhost : public cListObject {
private:
struct in_addr addr;
in_addr_t mask;
public:
cSVDRPhost(void);
bool Parse(const char *s);
bool Accepts(in_addr_t Address);
};
class cCaDefinition : public cListObject {
private:
int number;
char *description;
public:
cCaDefinition(void);
~cCaDefinition();
bool Parse(const char *s);
int Number(void) const { return number; }
const char *Description(void) const { return description; }
};
template<class T> class cConfig : public cList<T> {
private:
char *fileName;
void Clear(void)
{
delete fileName;
cList<T>::Clear();
}
public:
cConfig(void) { fileName = NULL; }
virtual ~cConfig() { delete fileName; }
virtual bool Load(const char *FileName, bool AllowComments = false)
{
Clear();
fileName = strdup(FileName);
bool result = false;
if (access(FileName, F_OK) == 0) {
isyslog(LOG_INFO, "loading %s", FileName);
FILE *f = fopen(fileName, "r");
if (f) {
int line = 0;
char buffer[MAXPARSEBUFFER];
result = true;
while (fgets(buffer, sizeof(buffer), f) > 0) {
line++;
if (AllowComments) {
char *p = strchr(buffer, '#');
if (p)
*p = 0;
}
if (!isempty(buffer)) {
T *l = new T;
if (l->Parse(buffer))
Add(l);
else {
esyslog(LOG_ERR, "error in %s, line %d\n", fileName, line);
delete l;
result = false;
break;
}
}
}
fclose(f);
}
else
LOG_ERROR_STR(fileName);
}
return result;
}
bool Save(void)
{
bool result = true;
T *l = (T *)First();
cSafeFile f(fileName);
if (f.Open()) {
while (l) {
if (!l->Save(f)) {
result = false;
break;
}
l = (T *)l->Next();
}
if (!f.Close())
result = false;
}
else
result = false;
return result;
}
};
class cChannels : public cConfig<cChannel> {
protected:
int maxNumber;
public:
cChannels(void) { maxNumber = 0; }
virtual bool Load(const char *FileName, bool AllowComments = false);
int GetNextGroup(int Idx); // Get next channel group
int GetPrevGroup(int Idx); // Get previous channel group
int GetNextNormal(int Idx); // Get next normal channel (not group)
void ReNumber(void); // Recalculate 'number' based on channel type
cChannel *GetByNumber(int Number);
cChannel *GetByServiceID(unsigned short ServiceId);
const char *GetChannelNameByNumber(int Number);
bool SwitchTo(int Number, cDvbApi *DvbApi = NULL);
int MaxNumber(void) { return maxNumber; }
};
class cTimers : public cConfig<cTimer> {
public:
cTimer *GetTimer(cTimer *Timer);
cTimer *GetMatch(time_t t);
cTimer *GetNextActiveTimer(void);
};
class cCommands : public cConfig<cCommand> {};
class cSVDRPhosts : public cConfig<cSVDRPhost> {
public:
bool Acceptable(in_addr_t Address);
};
class cCaDefinitions : public cConfig<cCaDefinition> {
public:
const cCaDefinition *Get(int Number);
};
extern cChannels Channels;
extern cTimers Timers;
extern cKeys Keys;
extern cCommands Commands;
extern cSVDRPhosts SVDRPhosts;
extern cCaDefinitions CaDefinitions;
class cSetup {
private:
static char *fileName;
void PrintCaCaps(FILE *f, const char *Name);
bool ParseCaCaps(const char *Value);
bool Parse(char *s);
public:
// Also adjust cMenuSetup (menu.c) when adding parameters here!
int OSDLanguage;
int PrimaryDVB;
int ShowInfoOnChSwitch;
int MenuScrollPage;
int MarkInstantRecord;
char NameInstantRecord[MaxFileName];
int LnbSLOF;
int LnbFrequLo;
int LnbFrequHi;
int DiSEqC;
int SetSystemTime;
int TimeTransponder;
int MarginStart, MarginStop;
int EPGScanTimeout;
int EPGBugfixLevel;
int SVDRPTimeout;
int SortTimers;
int PrimaryLimit;
int DefaultPriority, DefaultLifetime;
int UseSubtitle;
int RecordingDirs;
int VideoFormat;
int RecordDolbyDigital;
int ChannelInfoPos;
int OSDwidth, OSDheight;
int OSDMessageTime;
int MaxVideoFileSize;
int SplitEditedFiles;
int MinEventTimeout, MinUserInactivity;
int MultiSpeedMode;
int ShowReplayMode;
int CaCaps[MAXDVBAPI][MAXCACAPS];
int CurrentChannel;
int CurrentVolume;
cSetup(void);
bool Load(const char *FileName);
bool Save(const char *FileName = NULL);
};
extern cSetup Setup;
#endif //__CONFIG_H