mirror of
https://github.com/vdr-projects/vdr.git
synced 2025-03-01 10:50:46 +00:00
VDR developer version 2.1.6 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-2.1.6.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-2.1.5-2.1.6.diff MD5 checksums: 79519dac59166fabc2029b916bd61d00 vdr-2.1.6.tar.bz2 99f2f7094a242462696c0da5e52bb4c3 vdr-2.1.5-2.1.6.diff WARNING: ======== This is a *developer* version. Even though *I* use it in my productive environment, I strongly recommend that you only use it under controlled conditions and for testing and debugging. From the HISTORY file: - Revoked "Fixed some compiler warnings with Clang 3.4.1" from ci.c, because this did not compile with older versions of gcc (thanks to Sören Moch). - Fixed keeping the current position in the Recordings menu if a recording was deleted in a sub folder. - Fixed handling transfer mode on full featured DVB cards for encrypted channels that have no audio pid (reported by Christian Winkler). - Fixed a possible endless loop in cH264Parser::GetGolombUe(), which caused recordings on some HD channels to get stuck and resulted in buffer overflows. - Fixed handling PAT packets when detecting frames, so that they can be properly taken into account when regenerating the index of a recording. - Fixed adding new source types in case they are already registered (reported by Rolf Ahrenberg). - Removed an unnecessary assignment from cMenuRecordings::~cMenuRecordings(). - The Recordings menu now remembers the last recording the cursor was positioned on, independent of the last replayed recording. When a replay ends, however, the cursor will initially be positioned to the last replayed recording again when the menu is opened. - Updated the Finnish OSD texts (thanks to Antti Hartikainen). - Fixed drawing the live indicator in the LCARS skin in case there are no devices. - When checking for obsolete channels, those with an RID that is not 0 are now ignored (suggested by Oliver Endriss). - The SDT is now only parsed *after* the NIT has been read, and it explicitly uses the source value derived from the NIT. This should prevent new channels from being created with the wrong source. - Added a log message in case a receiver is detached from its device because the assigned CAM can't decrypt the channel. - Refactored setup parameter handling for output devices: + The function cDevice::GetVideoSystem() has been deprecated and will be removed in a future version. In order to check whether a particular plugin needs to be modified if this function is removed, you can comment out the line #define DEPRECATED_VIDEOSYSTEM in device.h. + Handling the "video (display) format" (things like 16:9, 4:3, pan&scan, letterbox etc) shall now be done by the individual output devices, because the types and numbers of parameters are too device specific. The Setup/DVB parameters "Video format" and "Video display format" are still there for now and can be used by SD devices. HD devices, however, shall not use these parameters (any more), but rather implement their own setup menu with the necessary parameters for controlling output. + The dvbhdffdevice plugin has been modified accordingly. + Made it clear that cDevice::SetDigitalAudioDevice() merely tells the output device that the current audio track is Dolby Digital. This function was only used by the original "full featured" DVB cards - do not use it for new developments! If an output device has several ways of replaying audio (like HDMI or analog jack) it shall implement the proper options in its plugin's SetupMenu() function. - Added support for "Pilot", "T2-System-Id" and "SISO/MISO" parameters (thanks to Rolf Ahrenberg). - Now initializing the isOnVideoDirectoryFileSystem member of cRecording when scanning the video directory, so that it won't cause a delay when opening the menu on a system with a large number of recordings. - Now resetting the isOnVideoDirectoryFileSystem member of a cRecording to -1 after renaming it, so that it will be re-checked upon the next call to IsOnVideoDirectoryFileSystem(). - Added support for systemd (thanks to Christopher Reimer). To activate this you need to add "SDNOTIFY=1" to the 'make' call.
1805 lines
54 KiB
C
1805 lines
54 KiB
C
/*
|
|
* device.c: The basic device interface
|
|
*
|
|
* See the main source file 'vdr.c' for copyright information and
|
|
* how to reach the author.
|
|
*
|
|
* $Id: device.c 3.15 2014/03/15 13:23:28 kls Exp $
|
|
*/
|
|
|
|
#include "device.h"
|
|
#include <errno.h>
|
|
#include <sys/ioctl.h>
|
|
#include <sys/mman.h>
|
|
#include "audio.h"
|
|
#include "channels.h"
|
|
#include "i18n.h"
|
|
#include "player.h"
|
|
#include "receiver.h"
|
|
#include "status.h"
|
|
#include "transfer.h"
|
|
|
|
// --- cLiveSubtitle ---------------------------------------------------------
|
|
|
|
class cLiveSubtitle : public cReceiver {
|
|
protected:
|
|
virtual void Receive(uchar *Data, int Length);
|
|
public:
|
|
cLiveSubtitle(int SPid);
|
|
virtual ~cLiveSubtitle();
|
|
};
|
|
|
|
cLiveSubtitle::cLiveSubtitle(int SPid)
|
|
{
|
|
AddPid(SPid);
|
|
}
|
|
|
|
cLiveSubtitle::~cLiveSubtitle()
|
|
{
|
|
cReceiver::Detach();
|
|
}
|
|
|
|
void cLiveSubtitle::Receive(uchar *Data, int Length)
|
|
{
|
|
if (cDevice::PrimaryDevice())
|
|
cDevice::PrimaryDevice()->PlayTs(Data, Length);
|
|
}
|
|
|
|
// --- cDeviceHook -----------------------------------------------------------
|
|
|
|
cDeviceHook::cDeviceHook(void)
|
|
{
|
|
cDevice::deviceHooks.Add(this);
|
|
}
|
|
|
|
bool cDeviceHook::DeviceProvidesTransponder(const cDevice *Device, const cChannel *Channel) const
|
|
{
|
|
return true;
|
|
}
|
|
|
|
// --- cDevice ---------------------------------------------------------------
|
|
|
|
// The minimum number of unknown PS1 packets to consider this a "pre 1.3.19 private stream":
|
|
#define MIN_PRE_1_3_19_PRIVATESTREAM 10
|
|
|
|
int cDevice::numDevices = 0;
|
|
int cDevice::useDevice = 0;
|
|
int cDevice::nextCardIndex = 0;
|
|
int cDevice::currentChannel = 1;
|
|
cDevice *cDevice::device[MAXDEVICES] = { NULL };
|
|
cDevice *cDevice::primaryDevice = NULL;
|
|
cList<cDeviceHook> cDevice::deviceHooks;
|
|
|
|
cDevice::cDevice(void)
|
|
:patPmtParser(true)
|
|
{
|
|
cardIndex = nextCardIndex++;
|
|
dsyslog("new device number %d", CardIndex() + 1);
|
|
|
|
SetDescription("receiver on device %d", CardIndex() + 1);
|
|
|
|
mute = false;
|
|
volume = Setup.CurrentVolume;
|
|
|
|
sectionHandler = NULL;
|
|
eitFilter = NULL;
|
|
patFilter = NULL;
|
|
sdtFilter = NULL;
|
|
nitFilter = NULL;
|
|
|
|
camSlot = NULL;
|
|
startScrambleDetection = 0;
|
|
|
|
occupiedTimeout = 0;
|
|
|
|
player = NULL;
|
|
isPlayingVideo = false;
|
|
keepTracks = false; // used in ClrAvailableTracks()!
|
|
ClrAvailableTracks();
|
|
currentAudioTrack = ttNone;
|
|
currentAudioTrackMissingCount = 0;
|
|
currentSubtitleTrack = ttNone;
|
|
liveSubtitle = NULL;
|
|
dvbSubtitleConverter = NULL;
|
|
autoSelectPreferredSubtitleLanguage = true;
|
|
|
|
for (int i = 0; i < MAXRECEIVERS; i++)
|
|
receiver[i] = NULL;
|
|
|
|
if (numDevices < MAXDEVICES)
|
|
device[numDevices++] = this;
|
|
else
|
|
esyslog("ERROR: too many devices!");
|
|
}
|
|
|
|
cDevice::~cDevice()
|
|
{
|
|
Detach(player);
|
|
DetachAllReceivers();
|
|
delete liveSubtitle;
|
|
delete dvbSubtitleConverter;
|
|
if (this == primaryDevice)
|
|
primaryDevice = NULL;
|
|
}
|
|
|
|
bool cDevice::WaitForAllDevicesReady(int Timeout)
|
|
{
|
|
for (time_t t0 = time(NULL); time(NULL) - t0 < Timeout; ) {
|
|
bool ready = true;
|
|
for (int i = 0; i < numDevices; i++) {
|
|
if (device[i] && !device[i]->Ready()) {
|
|
ready = false;
|
|
cCondWait::SleepMs(100);
|
|
}
|
|
}
|
|
if (ready)
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
void cDevice::SetUseDevice(int n)
|
|
{
|
|
if (n < MAXDEVICES)
|
|
useDevice |= (1 << n);
|
|
}
|
|
|
|
int cDevice::NextCardIndex(int n)
|
|
{
|
|
if (n > 0) {
|
|
nextCardIndex += n;
|
|
if (nextCardIndex >= MAXDEVICES)
|
|
esyslog("ERROR: nextCardIndex too big (%d)", nextCardIndex);
|
|
}
|
|
else if (n < 0)
|
|
esyslog("ERROR: invalid value in nextCardIndex(%d)", n);
|
|
return nextCardIndex;
|
|
}
|
|
|
|
int cDevice::DeviceNumber(void) const
|
|
{
|
|
for (int i = 0; i < numDevices; i++) {
|
|
if (device[i] == this)
|
|
return i;
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
cString cDevice::DeviceType(void) const
|
|
{
|
|
return "";
|
|
}
|
|
|
|
cString cDevice::DeviceName(void) const
|
|
{
|
|
return "";
|
|
}
|
|
|
|
void cDevice::MakePrimaryDevice(bool On)
|
|
{
|
|
if (!On) {
|
|
DELETENULL(liveSubtitle);
|
|
DELETENULL(dvbSubtitleConverter);
|
|
}
|
|
}
|
|
|
|
bool cDevice::SetPrimaryDevice(int n)
|
|
{
|
|
n--;
|
|
if (0 <= n && n < numDevices && device[n]) {
|
|
isyslog("setting primary device to %d", n + 1);
|
|
if (primaryDevice)
|
|
primaryDevice->MakePrimaryDevice(false);
|
|
primaryDevice = device[n];
|
|
primaryDevice->MakePrimaryDevice(true);
|
|
primaryDevice->SetVideoFormat(Setup.VideoFormat);
|
|
primaryDevice->SetVolumeDevice(Setup.CurrentVolume);
|
|
return true;
|
|
}
|
|
esyslog("ERROR: invalid primary device number: %d", n + 1);
|
|
return false;
|
|
}
|
|
|
|
bool cDevice::HasDecoder(void) const
|
|
{
|
|
return false;
|
|
}
|
|
|
|
cSpuDecoder *cDevice::GetSpuDecoder(void)
|
|
{
|
|
return NULL;
|
|
}
|
|
|
|
cDevice *cDevice::ActualDevice(void)
|
|
{
|
|
cDevice *d = cTransferControl::ReceiverDevice();
|
|
if (!d)
|
|
d = PrimaryDevice();
|
|
return d;
|
|
}
|
|
|
|
cDevice *cDevice::GetDevice(int Index)
|
|
{
|
|
return (0 <= Index && Index < numDevices) ? device[Index] : NULL;
|
|
}
|
|
|
|
static int GetClippedNumProvidedSystems(int AvailableBits, cDevice *Device)
|
|
{
|
|
int MaxNumProvidedSystems = (1 << AvailableBits) - 1;
|
|
int NumProvidedSystems = Device->NumProvidedSystems();
|
|
if (NumProvidedSystems > MaxNumProvidedSystems) {
|
|
esyslog("ERROR: device %d supports %d modulation systems but cDevice::GetDevice() currently only supports %d delivery systems which should be fixed", Device->CardIndex() + 1, NumProvidedSystems, MaxNumProvidedSystems);
|
|
NumProvidedSystems = MaxNumProvidedSystems;
|
|
}
|
|
else if (NumProvidedSystems <= 0) {
|
|
esyslog("ERROR: device %d reported an invalid number (%d) of supported delivery systems - assuming 1", Device->CardIndex() + 1, NumProvidedSystems);
|
|
NumProvidedSystems = 1;
|
|
}
|
|
return NumProvidedSystems;
|
|
}
|
|
|
|
cDevice *cDevice::GetDevice(const cChannel *Channel, int Priority, bool LiveView, bool Query)
|
|
{
|
|
// Collect the current priorities of all CAM slots that can decrypt the channel:
|
|
int NumCamSlots = CamSlots.Count();
|
|
int SlotPriority[NumCamSlots];
|
|
int NumUsableSlots = 0;
|
|
bool InternalCamNeeded = false;
|
|
if (Channel->Ca() >= CA_ENCRYPTED_MIN) {
|
|
for (cCamSlot *CamSlot = CamSlots.First(); CamSlot; CamSlot = CamSlots.Next(CamSlot)) {
|
|
SlotPriority[CamSlot->Index()] = MAXPRIORITY + 1; // assumes it can't be used
|
|
if (CamSlot->ModuleStatus() == msReady) {
|
|
if (CamSlot->ProvidesCa(Channel->Caids())) {
|
|
if (!ChannelCamRelations.CamChecked(Channel->GetChannelID(), CamSlot->SlotNumber())) {
|
|
SlotPriority[CamSlot->Index()] = CamSlot->Priority();
|
|
NumUsableSlots++;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
if (!NumUsableSlots)
|
|
InternalCamNeeded = true; // no CAM is able to decrypt this channel
|
|
}
|
|
|
|
bool NeedsDetachReceivers = false;
|
|
cDevice *d = NULL;
|
|
cCamSlot *s = NULL;
|
|
|
|
uint32_t Impact = 0xFFFFFFFF; // we're looking for a device with the least impact
|
|
for (int j = 0; j < NumCamSlots || !NumUsableSlots; j++) {
|
|
if (NumUsableSlots && SlotPriority[j] > MAXPRIORITY)
|
|
continue; // there is no CAM available in this slot
|
|
for (int i = 0; i < numDevices; i++) {
|
|
if (Channel->Ca() && Channel->Ca() <= CA_DVB_MAX && Channel->Ca() != device[i]->CardIndex() + 1)
|
|
continue; // a specific card was requested, but not this one
|
|
bool HasInternalCam = device[i]->HasInternalCam();
|
|
if (InternalCamNeeded && !HasInternalCam)
|
|
continue; // no CAM is able to decrypt this channel and the device uses vdr handled CAMs
|
|
if (NumUsableSlots && !HasInternalCam && !CamSlots.Get(j)->Assign(device[i], true))
|
|
continue; // CAM slot can't be used with this device
|
|
bool ndr;
|
|
if (device[i]->ProvidesChannel(Channel, Priority, &ndr)) { // this device is basically able to do the job
|
|
if (NumUsableSlots && !HasInternalCam && device[i]->CamSlot() && device[i]->CamSlot() != CamSlots.Get(j))
|
|
ndr = true; // using a different CAM slot requires detaching receivers
|
|
// Put together an integer number that reflects the "impact" using
|
|
// this device would have on the overall system. Each condition is represented
|
|
// by one bit in the number (or several bits, if the condition is actually
|
|
// a numeric value). The sequence in which the conditions are listed corresponds
|
|
// to their individual severity, where the one listed first will make the most
|
|
// difference, because it results in the most significant bit of the result.
|
|
uint32_t imp = 0;
|
|
imp <<= 1; imp |= LiveView ? !device[i]->IsPrimaryDevice() || ndr : 0; // prefer the primary device for live viewing if we don't need to detach existing receivers
|
|
imp <<= 1; imp |= !device[i]->Receiving() && (device[i] != cTransferControl::ReceiverDevice() || device[i]->IsPrimaryDevice()) || ndr; // use receiving devices if we don't need to detach existing receivers, but avoid primary device in local transfer mode
|
|
imp <<= 1; imp |= device[i]->Receiving(); // avoid devices that are receiving
|
|
imp <<= 4; imp |= GetClippedNumProvidedSystems(4, device[i]) - 1; // avoid cards which support multiple delivery systems
|
|
imp <<= 1; imp |= device[i] == cTransferControl::ReceiverDevice(); // avoid the Transfer Mode receiver device
|
|
imp <<= 8; imp |= device[i]->Priority() - IDLEPRIORITY; // use the device with the lowest priority (- IDLEPRIORITY to assure that values -100..99 can be used)
|
|
imp <<= 8; imp |= ((NumUsableSlots && !HasInternalCam) ? SlotPriority[j] : IDLEPRIORITY) - IDLEPRIORITY;// use the CAM slot with the lowest priority (- IDLEPRIORITY to assure that values -100..99 can be used)
|
|
imp <<= 1; imp |= ndr; // avoid devices if we need to detach existing receivers
|
|
imp <<= 1; imp |= (NumUsableSlots || InternalCamNeeded) ? 0 : device[i]->HasCi(); // avoid cards with Common Interface for FTA channels
|
|
imp <<= 1; imp |= device[i]->AvoidRecording(); // avoid SD full featured cards
|
|
imp <<= 1; imp |= (NumUsableSlots && !HasInternalCam) ? !ChannelCamRelations.CamDecrypt(Channel->GetChannelID(), j + 1) : 0; // prefer CAMs that are known to decrypt this channel
|
|
imp <<= 1; imp |= device[i]->IsPrimaryDevice(); // avoid the primary device
|
|
if (imp < Impact) {
|
|
// This device has less impact than any previous one, so we take it.
|
|
Impact = imp;
|
|
d = device[i];
|
|
NeedsDetachReceivers = ndr;
|
|
if (NumUsableSlots && !HasInternalCam)
|
|
s = CamSlots.Get(j);
|
|
}
|
|
}
|
|
}
|
|
if (!NumUsableSlots)
|
|
break; // no CAM necessary, so just one loop over the devices
|
|
}
|
|
if (d && !Query) {
|
|
if (NeedsDetachReceivers)
|
|
d->DetachAllReceivers();
|
|
if (s) {
|
|
if (s->Device() != d) {
|
|
if (s->Device())
|
|
s->Device()->DetachAllReceivers();
|
|
if (d->CamSlot())
|
|
d->CamSlot()->Assign(NULL);
|
|
s->Assign(d);
|
|
}
|
|
}
|
|
else if (d->CamSlot() && !d->CamSlot()->IsDecrypting())
|
|
d->CamSlot()->Assign(NULL);
|
|
}
|
|
return d;
|
|
}
|
|
|
|
cDevice *cDevice::GetDeviceForTransponder(const cChannel *Channel, int Priority)
|
|
{
|
|
cDevice *Device = NULL;
|
|
for (int i = 0; i < cDevice::NumDevices(); i++) {
|
|
if (cDevice *d = cDevice::GetDevice(i)) {
|
|
if (d->IsTunedToTransponder(Channel))
|
|
return d; // if any device is tuned to the transponder, we're done
|
|
if (d->ProvidesTransponder(Channel)) {
|
|
if (d->MaySwitchTransponder(Channel))
|
|
Device = d; // this device may switch to the transponder without disturbing any receiver or live view
|
|
else if (!d->Occupied() && d->MaySwitchTransponder(Channel)) { // MaySwitchTransponder() implicitly calls Occupied()
|
|
if (d->Priority() < Priority && (!Device || d->Priority() < Device->Priority()))
|
|
Device = d; // use this one only if no other with less impact can be found
|
|
}
|
|
}
|
|
}
|
|
}
|
|
return Device;
|
|
}
|
|
|
|
bool cDevice::HasCi(void)
|
|
{
|
|
return false;
|
|
}
|
|
|
|
void cDevice::SetCamSlot(cCamSlot *CamSlot)
|
|
{
|
|
LOCK_THREAD;
|
|
camSlot = CamSlot;
|
|
}
|
|
|
|
void cDevice::Shutdown(void)
|
|
{
|
|
deviceHooks.Clear();
|
|
for (int i = 0; i < numDevices; i++) {
|
|
delete device[i];
|
|
device[i] = NULL;
|
|
}
|
|
}
|
|
|
|
uchar *cDevice::GrabImage(int &Size, bool Jpeg, int Quality, int SizeX, int SizeY)
|
|
{
|
|
return NULL;
|
|
}
|
|
|
|
bool cDevice::GrabImageFile(const char *FileName, bool Jpeg, int Quality, int SizeX, int SizeY)
|
|
{
|
|
int result = 0;
|
|
int fd = open(FileName, O_WRONLY | O_CREAT | O_NOFOLLOW | O_TRUNC, DEFFILEMODE);
|
|
if (fd >= 0) {
|
|
int ImageSize;
|
|
uchar *Image = GrabImage(ImageSize, Jpeg, Quality, SizeX, SizeY);
|
|
if (Image) {
|
|
if (safe_write(fd, Image, ImageSize) == ImageSize)
|
|
isyslog("grabbed image to %s", FileName);
|
|
else {
|
|
LOG_ERROR_STR(FileName);
|
|
result |= 1;
|
|
}
|
|
free(Image);
|
|
}
|
|
else
|
|
result |= 1;
|
|
close(fd);
|
|
}
|
|
else {
|
|
LOG_ERROR_STR(FileName);
|
|
result |= 1;
|
|
}
|
|
return result == 0;
|
|
}
|
|
|
|
void cDevice::SetVideoDisplayFormat(eVideoDisplayFormat VideoDisplayFormat)
|
|
{
|
|
cSpuDecoder *spuDecoder = GetSpuDecoder();
|
|
if (spuDecoder) {
|
|
if (Setup.VideoFormat)
|
|
spuDecoder->setScaleMode(cSpuDecoder::eSpuNormal);
|
|
else {
|
|
switch (VideoDisplayFormat) {
|
|
case vdfPanAndScan:
|
|
spuDecoder->setScaleMode(cSpuDecoder::eSpuPanAndScan);
|
|
break;
|
|
case vdfLetterBox:
|
|
spuDecoder->setScaleMode(cSpuDecoder::eSpuLetterBox);
|
|
break;
|
|
case vdfCenterCutOut:
|
|
spuDecoder->setScaleMode(cSpuDecoder::eSpuNormal);
|
|
break;
|
|
default: esyslog("ERROR: invalid value for VideoDisplayFormat '%d'", VideoDisplayFormat);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
void cDevice::SetVideoFormat(bool VideoFormat16_9)
|
|
{
|
|
}
|
|
|
|
void cDevice::GetVideoSize(int &Width, int &Height, double &VideoAspect)
|
|
{
|
|
Width = 0;
|
|
Height = 0;
|
|
VideoAspect = 1.0;
|
|
}
|
|
|
|
void cDevice::GetOsdSize(int &Width, int &Height, double &PixelAspect)
|
|
{
|
|
Width = 720;
|
|
Height = 480;
|
|
PixelAspect = 1.0;
|
|
}
|
|
|
|
//#define PRINTPIDS(s) { char b[500]; char *q = b; q += sprintf(q, "%d %s ", CardIndex(), s); for (int i = 0; i < MAXPIDHANDLES; i++) q += sprintf(q, " %s%4d %d", i == ptOther ? "* " : "", pidHandles[i].pid, pidHandles[i].used); dsyslog("%s", b); }
|
|
#define PRINTPIDS(s)
|
|
|
|
bool cDevice::HasPid(int Pid) const
|
|
{
|
|
for (int i = 0; i < MAXPIDHANDLES; i++) {
|
|
if (pidHandles[i].pid == Pid)
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
bool cDevice::AddPid(int Pid, ePidType PidType, int StreamType)
|
|
{
|
|
if (Pid || PidType == ptPcr) {
|
|
int n = -1;
|
|
int a = -1;
|
|
if (PidType != ptPcr) { // PPID always has to be explicit
|
|
for (int i = 0; i < MAXPIDHANDLES; i++) {
|
|
if (i != ptPcr) {
|
|
if (pidHandles[i].pid == Pid)
|
|
n = i;
|
|
else if (a < 0 && i >= ptOther && !pidHandles[i].used)
|
|
a = i;
|
|
}
|
|
}
|
|
}
|
|
if (n >= 0) {
|
|
// The Pid is already in use
|
|
if (++pidHandles[n].used == 2 && n <= ptTeletext) {
|
|
// It's a special PID that may have to be switched into "tap" mode
|
|
PRINTPIDS("A");
|
|
if (!SetPid(&pidHandles[n], n, true)) {
|
|
esyslog("ERROR: can't set PID %d on device %d", Pid, CardIndex() + 1);
|
|
if (PidType <= ptTeletext)
|
|
DetachAll(Pid);
|
|
DelPid(Pid, PidType);
|
|
return false;
|
|
}
|
|
if (camSlot)
|
|
camSlot->SetPid(Pid, true);
|
|
}
|
|
PRINTPIDS("a");
|
|
return true;
|
|
}
|
|
else if (PidType < ptOther) {
|
|
// The Pid is not yet in use and it is a special one
|
|
n = PidType;
|
|
}
|
|
else if (a >= 0) {
|
|
// The Pid is not yet in use and we have a free slot
|
|
n = a;
|
|
}
|
|
else {
|
|
esyslog("ERROR: no free slot for PID %d on device %d", Pid, CardIndex() + 1);
|
|
return false;
|
|
}
|
|
if (n >= 0) {
|
|
pidHandles[n].pid = Pid;
|
|
pidHandles[n].streamType = StreamType;
|
|
pidHandles[n].used = 1;
|
|
PRINTPIDS("C");
|
|
if (!SetPid(&pidHandles[n], n, true)) {
|
|
esyslog("ERROR: can't set PID %d on device %d", Pid, CardIndex() + 1);
|
|
if (PidType <= ptTeletext)
|
|
DetachAll(Pid);
|
|
DelPid(Pid, PidType);
|
|
return false;
|
|
}
|
|
if (camSlot)
|
|
camSlot->SetPid(Pid, true);
|
|
}
|
|
}
|
|
return true;
|
|
}
|
|
|
|
void cDevice::DelPid(int Pid, ePidType PidType)
|
|
{
|
|
if (Pid || PidType == ptPcr) {
|
|
int n = -1;
|
|
if (PidType == ptPcr)
|
|
n = PidType; // PPID always has to be explicit
|
|
else {
|
|
for (int i = 0; i < MAXPIDHANDLES; i++) {
|
|
if (pidHandles[i].pid == Pid) {
|
|
n = i;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
if (n >= 0 && pidHandles[n].used) {
|
|
PRINTPIDS("D");
|
|
if (--pidHandles[n].used < 2) {
|
|
SetPid(&pidHandles[n], n, false);
|
|
if (pidHandles[n].used == 0) {
|
|
pidHandles[n].handle = -1;
|
|
pidHandles[n].pid = 0;
|
|
if (camSlot)
|
|
camSlot->SetPid(Pid, false);
|
|
}
|
|
}
|
|
PRINTPIDS("E");
|
|
}
|
|
}
|
|
}
|
|
|
|
bool cDevice::SetPid(cPidHandle *Handle, int Type, bool On)
|
|
{
|
|
return false;
|
|
}
|
|
|
|
void cDevice::DelLivePids(void)
|
|
{
|
|
for (int i = ptAudio; i < ptOther; i++) {
|
|
if (pidHandles[i].pid)
|
|
DelPid(pidHandles[i].pid, ePidType(i));
|
|
}
|
|
}
|
|
|
|
void cDevice::StartSectionHandler(void)
|
|
{
|
|
if (!sectionHandler) {
|
|
sectionHandler = new cSectionHandler(this);
|
|
AttachFilter(eitFilter = new cEitFilter);
|
|
AttachFilter(patFilter = new cPatFilter);
|
|
AttachFilter(sdtFilter = new cSdtFilter(patFilter));
|
|
AttachFilter(nitFilter = new cNitFilter(sdtFilter));
|
|
}
|
|
}
|
|
|
|
void cDevice::StopSectionHandler(void)
|
|
{
|
|
if (sectionHandler) {
|
|
delete nitFilter;
|
|
delete sdtFilter;
|
|
delete patFilter;
|
|
delete eitFilter;
|
|
delete sectionHandler;
|
|
nitFilter = NULL;
|
|
sdtFilter = NULL;
|
|
patFilter = NULL;
|
|
eitFilter = NULL;
|
|
sectionHandler = NULL;
|
|
}
|
|
}
|
|
|
|
int cDevice::OpenFilter(u_short Pid, u_char Tid, u_char Mask)
|
|
{
|
|
return -1;
|
|
}
|
|
|
|
int cDevice::ReadFilter(int Handle, void *Buffer, size_t Length)
|
|
{
|
|
return safe_read(Handle, Buffer, Length);
|
|
}
|
|
|
|
void cDevice::CloseFilter(int Handle)
|
|
{
|
|
close(Handle);
|
|
}
|
|
|
|
void cDevice::AttachFilter(cFilter *Filter)
|
|
{
|
|
if (sectionHandler)
|
|
sectionHandler->Attach(Filter);
|
|
}
|
|
|
|
void cDevice::Detach(cFilter *Filter)
|
|
{
|
|
if (sectionHandler)
|
|
sectionHandler->Detach(Filter);
|
|
}
|
|
|
|
bool cDevice::ProvidesSource(int Source) const
|
|
{
|
|
return false;
|
|
}
|
|
|
|
bool cDevice::DeviceHooksProvidesTransponder(const cChannel *Channel) const
|
|
{
|
|
cDeviceHook *Hook = deviceHooks.First();
|
|
while (Hook) {
|
|
if (!Hook->DeviceProvidesTransponder(this, Channel))
|
|
return false;
|
|
Hook = deviceHooks.Next(Hook);
|
|
}
|
|
return true;
|
|
}
|
|
|
|
bool cDevice::ProvidesTransponder(const cChannel *Channel) const
|
|
{
|
|
return false;
|
|
}
|
|
|
|
bool cDevice::ProvidesTransponderExclusively(const cChannel *Channel) const
|
|
{
|
|
for (int i = 0; i < numDevices; i++) {
|
|
if (device[i] && device[i] != this && device[i]->ProvidesTransponder(Channel))
|
|
return false;
|
|
}
|
|
return true;
|
|
}
|
|
|
|
bool cDevice::ProvidesChannel(const cChannel *Channel, int Priority, bool *NeedsDetachReceivers) const
|
|
{
|
|
return false;
|
|
}
|
|
|
|
bool cDevice::ProvidesEIT(void) const
|
|
{
|
|
return false;
|
|
}
|
|
|
|
int cDevice::NumProvidedSystems(void) const
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
const cPositioner *cDevice::Positioner(void) const
|
|
{
|
|
return NULL;
|
|
}
|
|
|
|
int cDevice::SignalStrength(void) const
|
|
{
|
|
return -1;
|
|
}
|
|
|
|
int cDevice::SignalQuality(void) const
|
|
{
|
|
return -1;
|
|
}
|
|
|
|
const cChannel *cDevice::GetCurrentlyTunedTransponder(void) const
|
|
{
|
|
return NULL;
|
|
}
|
|
|
|
bool cDevice::IsTunedToTransponder(const cChannel *Channel) const
|
|
{
|
|
return false;
|
|
}
|
|
|
|
bool cDevice::MaySwitchTransponder(const cChannel *Channel) const
|
|
{
|
|
return time(NULL) > occupiedTimeout && !Receiving() && !(pidHandles[ptAudio].pid || pidHandles[ptVideo].pid || pidHandles[ptDolby].pid);
|
|
}
|
|
|
|
bool cDevice::SwitchChannel(const cChannel *Channel, bool LiveView)
|
|
{
|
|
if (LiveView) {
|
|
isyslog("switching to channel %d", Channel->Number());
|
|
cControl::Shutdown(); // prevents old channel from being shown too long if GetDevice() takes longer
|
|
}
|
|
for (int i = 3; i--;) {
|
|
switch (SetChannel(Channel, LiveView)) {
|
|
case scrOk: return true;
|
|
case scrNotAvailable: Skins.Message(mtInfo, tr("Channel not available!"));
|
|
return false;
|
|
case scrNoTransfer: Skins.Message(mtError, tr("Can't start Transfer Mode!"));
|
|
return false;
|
|
case scrFailed: break; // loop will retry
|
|
default: esyslog("ERROR: invalid return value from SetChannel");
|
|
}
|
|
esyslog("retrying");
|
|
}
|
|
return false;
|
|
}
|
|
|
|
bool cDevice::SwitchChannel(int Direction)
|
|
{
|
|
bool result = false;
|
|
Direction = sgn(Direction);
|
|
if (Direction) {
|
|
cControl::Shutdown(); // prevents old channel from being shown too long if GetDevice() takes longer
|
|
int n = CurrentChannel() + Direction;
|
|
int first = n;
|
|
cChannel *channel;
|
|
while ((channel = Channels.GetByNumber(n, Direction)) != NULL) {
|
|
// try only channels which are currently available
|
|
if (GetDevice(channel, LIVEPRIORITY, true, true))
|
|
break;
|
|
n = channel->Number() + Direction;
|
|
}
|
|
if (channel) {
|
|
int d = n - first;
|
|
if (abs(d) == 1)
|
|
dsyslog("skipped channel %d", first);
|
|
else if (d)
|
|
dsyslog("skipped channels %d..%d", first, n - sgn(d));
|
|
if (PrimaryDevice()->SwitchChannel(channel, true))
|
|
result = true;
|
|
}
|
|
else if (n != first)
|
|
Skins.Message(mtError, tr("Channel not available!"));
|
|
}
|
|
return result;
|
|
}
|
|
|
|
eSetChannelResult cDevice::SetChannel(const cChannel *Channel, bool LiveView)
|
|
{
|
|
cStatus::MsgChannelSwitch(this, 0, LiveView);
|
|
|
|
if (LiveView) {
|
|
StopReplay();
|
|
DELETENULL(liveSubtitle);
|
|
DELETENULL(dvbSubtitleConverter);
|
|
}
|
|
|
|
cDevice *Device = (LiveView && IsPrimaryDevice()) ? GetDevice(Channel, LIVEPRIORITY, true) : this;
|
|
|
|
bool NeedsTransferMode = Device != this;
|
|
// If the CAM slot wants the TS data, we need to switch to Transfer Mode:
|
|
if (!NeedsTransferMode && LiveView && IsPrimaryDevice() && CamSlot() && CamSlot()->WantsTsData())
|
|
NeedsTransferMode = true;
|
|
|
|
eSetChannelResult Result = scrOk;
|
|
|
|
// If this DVB card can't receive this channel, let's see if we can
|
|
// use the card that actually can receive it and transfer data from there:
|
|
|
|
if (NeedsTransferMode) {
|
|
if (Device && CanReplay()) {
|
|
if (Device->SetChannel(Channel, false) == scrOk) // calling SetChannel() directly, not SwitchChannel()!
|
|
cControl::Launch(new cTransferControl(Device, Channel));
|
|
else
|
|
Result = scrNoTransfer;
|
|
}
|
|
else
|
|
Result = scrNotAvailable;
|
|
}
|
|
else {
|
|
Channels.Lock(false);
|
|
// Stop section handling:
|
|
if (sectionHandler) {
|
|
sectionHandler->SetStatus(false);
|
|
sectionHandler->SetChannel(NULL);
|
|
}
|
|
// Tell the camSlot about the channel switch and add all PIDs of this
|
|
// channel to it, for possible later decryption:
|
|
if (camSlot)
|
|
camSlot->AddChannel(Channel);
|
|
if (SetChannelDevice(Channel, LiveView)) {
|
|
// Start section handling:
|
|
if (sectionHandler) {
|
|
patFilter->Trigger(Channel->Sid());
|
|
sectionHandler->SetChannel(Channel);
|
|
sectionHandler->SetStatus(true);
|
|
}
|
|
// Start decrypting any PIDs that might have been set in SetChannelDevice():
|
|
if (camSlot)
|
|
camSlot->StartDecrypting();
|
|
}
|
|
else
|
|
Result = scrFailed;
|
|
Channels.Unlock();
|
|
}
|
|
|
|
if (Result == scrOk) {
|
|
if (LiveView && IsPrimaryDevice()) {
|
|
currentChannel = Channel->Number();
|
|
// Set the available audio tracks:
|
|
ClrAvailableTracks();
|
|
for (int i = 0; i < MAXAPIDS; i++)
|
|
SetAvailableTrack(ttAudio, i, Channel->Apid(i), Channel->Alang(i));
|
|
if (Setup.UseDolbyDigital) {
|
|
for (int i = 0; i < MAXDPIDS; i++)
|
|
SetAvailableTrack(ttDolby, i, Channel->Dpid(i), Channel->Dlang(i));
|
|
}
|
|
for (int i = 0; i < MAXSPIDS; i++)
|
|
SetAvailableTrack(ttSubtitle, i, Channel->Spid(i), Channel->Slang(i));
|
|
if (!NeedsTransferMode)
|
|
EnsureAudioTrack(true);
|
|
EnsureSubtitleTrack();
|
|
}
|
|
cStatus::MsgChannelSwitch(this, Channel->Number(), LiveView); // only report status if channel switch successful
|
|
}
|
|
|
|
return Result;
|
|
}
|
|
|
|
void cDevice::ForceTransferMode(void)
|
|
{
|
|
if (!cTransferControl::ReceiverDevice()) {
|
|
cChannel *Channel = Channels.GetByNumber(CurrentChannel());
|
|
if (Channel)
|
|
SetChannelDevice(Channel, false); // this implicitly starts Transfer Mode
|
|
}
|
|
}
|
|
|
|
int cDevice::Occupied(void) const
|
|
{
|
|
int Seconds = occupiedTimeout - time(NULL);
|
|
return Seconds > 0 ? Seconds : 0;
|
|
}
|
|
|
|
void cDevice::SetOccupied(int Seconds)
|
|
{
|
|
if (Seconds >= 0)
|
|
occupiedTimeout = time(NULL) + min(Seconds, MAXOCCUPIEDTIMEOUT);
|
|
}
|
|
|
|
bool cDevice::SetChannelDevice(const cChannel *Channel, bool LiveView)
|
|
{
|
|
return false;
|
|
}
|
|
|
|
bool cDevice::HasLock(int TimeoutMs) const
|
|
{
|
|
return true;
|
|
}
|
|
|
|
bool cDevice::HasProgramme(void) const
|
|
{
|
|
return Replaying() || pidHandles[ptAudio].pid || pidHandles[ptVideo].pid;
|
|
}
|
|
|
|
int cDevice::GetAudioChannelDevice(void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
void cDevice::SetAudioChannelDevice(int AudioChannel)
|
|
{
|
|
}
|
|
|
|
void cDevice::SetVolumeDevice(int Volume)
|
|
{
|
|
}
|
|
|
|
void cDevice::SetDigitalAudioDevice(bool On)
|
|
{
|
|
}
|
|
|
|
void cDevice::SetAudioTrackDevice(eTrackType Type)
|
|
{
|
|
}
|
|
|
|
void cDevice::SetSubtitleTrackDevice(eTrackType Type)
|
|
{
|
|
}
|
|
|
|
bool cDevice::ToggleMute(void)
|
|
{
|
|
int OldVolume = volume;
|
|
mute = !mute;
|
|
//XXX why is it necessary to use different sequences???
|
|
if (mute) {
|
|
SetVolume(0, true);
|
|
Audios.MuteAudio(mute); // Mute external audio after analog audio
|
|
}
|
|
else {
|
|
Audios.MuteAudio(mute); // Enable external audio before analog audio
|
|
SetVolume(OldVolume, true);
|
|
}
|
|
volume = OldVolume;
|
|
return mute;
|
|
}
|
|
|
|
int cDevice::GetAudioChannel(void)
|
|
{
|
|
int c = GetAudioChannelDevice();
|
|
return (0 <= c && c <= 2) ? c : 0;
|
|
}
|
|
|
|
void cDevice::SetAudioChannel(int AudioChannel)
|
|
{
|
|
if (0 <= AudioChannel && AudioChannel <= 2)
|
|
SetAudioChannelDevice(AudioChannel);
|
|
}
|
|
|
|
void cDevice::SetVolume(int Volume, bool Absolute)
|
|
{
|
|
int OldVolume = volume;
|
|
volume = constrain(Absolute ? Volume : volume + Volume, 0, MAXVOLUME);
|
|
SetVolumeDevice(volume);
|
|
Absolute |= mute;
|
|
cStatus::MsgSetVolume(Absolute ? volume : volume - OldVolume, Absolute);
|
|
if (volume > 0) {
|
|
mute = false;
|
|
Audios.MuteAudio(mute);
|
|
}
|
|
}
|
|
|
|
void cDevice::ClrAvailableTracks(bool DescriptionsOnly, bool IdsOnly)
|
|
{
|
|
if (keepTracks)
|
|
return;
|
|
if (DescriptionsOnly) {
|
|
for (int i = ttNone; i < ttMaxTrackTypes; i++)
|
|
*availableTracks[i].description = 0;
|
|
}
|
|
else {
|
|
if (IdsOnly) {
|
|
for (int i = ttNone; i < ttMaxTrackTypes; i++)
|
|
availableTracks[i].id = 0;
|
|
}
|
|
else
|
|
memset(availableTracks, 0, sizeof(availableTracks));
|
|
pre_1_3_19_PrivateStream = 0;
|
|
SetAudioChannel(0); // fall back to stereo
|
|
currentAudioTrackMissingCount = 0;
|
|
currentAudioTrack = ttNone;
|
|
currentSubtitleTrack = ttNone;
|
|
}
|
|
}
|
|
|
|
bool cDevice::SetAvailableTrack(eTrackType Type, int Index, uint16_t Id, const char *Language, const char *Description)
|
|
{
|
|
eTrackType t = eTrackType(Type + Index);
|
|
if (Type == ttAudio && IS_AUDIO_TRACK(t) ||
|
|
Type == ttDolby && IS_DOLBY_TRACK(t) ||
|
|
Type == ttSubtitle && IS_SUBTITLE_TRACK(t)) {
|
|
if (Language)
|
|
strn0cpy(availableTracks[t].language, Language, sizeof(availableTracks[t].language));
|
|
if (Description)
|
|
Utf8Strn0Cpy(availableTracks[t].description, Description, sizeof(availableTracks[t].description));
|
|
if (Id) {
|
|
availableTracks[t].id = Id; // setting 'id' last to avoid the need for extensive locking
|
|
if (Type == ttAudio || Type == ttDolby) {
|
|
int numAudioTracks = NumAudioTracks();
|
|
if (!availableTracks[currentAudioTrack].id && numAudioTracks && currentAudioTrackMissingCount++ > numAudioTracks * 10)
|
|
EnsureAudioTrack();
|
|
else if (t == currentAudioTrack)
|
|
currentAudioTrackMissingCount = 0;
|
|
}
|
|
else if (Type == ttSubtitle && autoSelectPreferredSubtitleLanguage)
|
|
EnsureSubtitleTrack();
|
|
}
|
|
return true;
|
|
}
|
|
else
|
|
esyslog("ERROR: SetAvailableTrack called with invalid Type/Index (%d/%d)", Type, Index);
|
|
return false;
|
|
}
|
|
|
|
const tTrackId *cDevice::GetTrack(eTrackType Type)
|
|
{
|
|
return (ttNone < Type && Type < ttMaxTrackTypes) ? &availableTracks[Type] : NULL;
|
|
}
|
|
|
|
int cDevice::NumTracks(eTrackType FirstTrack, eTrackType LastTrack) const
|
|
{
|
|
int n = 0;
|
|
for (int i = FirstTrack; i <= LastTrack; i++) {
|
|
if (availableTracks[i].id)
|
|
n++;
|
|
}
|
|
return n;
|
|
}
|
|
|
|
int cDevice::NumAudioTracks(void) const
|
|
{
|
|
return NumTracks(ttAudioFirst, ttDolbyLast);
|
|
}
|
|
|
|
int cDevice::NumSubtitleTracks(void) const
|
|
{
|
|
return NumTracks(ttSubtitleFirst, ttSubtitleLast);
|
|
}
|
|
|
|
bool cDevice::SetCurrentAudioTrack(eTrackType Type)
|
|
{
|
|
if (ttNone < Type && Type <= ttDolbyLast) {
|
|
cMutexLock MutexLock(&mutexCurrentAudioTrack);
|
|
if (IS_DOLBY_TRACK(Type))
|
|
SetDigitalAudioDevice(true);
|
|
currentAudioTrack = Type;
|
|
if (player)
|
|
player->SetAudioTrack(currentAudioTrack, GetTrack(currentAudioTrack));
|
|
else
|
|
SetAudioTrackDevice(currentAudioTrack);
|
|
if (IS_AUDIO_TRACK(Type))
|
|
SetDigitalAudioDevice(false);
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
bool cDevice::SetCurrentSubtitleTrack(eTrackType Type, bool Manual)
|
|
{
|
|
if (Type == ttNone || IS_SUBTITLE_TRACK(Type)) {
|
|
currentSubtitleTrack = Type;
|
|
autoSelectPreferredSubtitleLanguage = !Manual;
|
|
if (dvbSubtitleConverter)
|
|
dvbSubtitleConverter->Reset();
|
|
if (Type == ttNone && dvbSubtitleConverter) {
|
|
cMutexLock MutexLock(&mutexCurrentSubtitleTrack);
|
|
DELETENULL(dvbSubtitleConverter);
|
|
}
|
|
DELETENULL(liveSubtitle);
|
|
if (player)
|
|
player->SetSubtitleTrack(currentSubtitleTrack, GetTrack(currentSubtitleTrack));
|
|
else
|
|
SetSubtitleTrackDevice(currentSubtitleTrack);
|
|
if (currentSubtitleTrack != ttNone && !Replaying() && !Transferring()) {
|
|
const tTrackId *TrackId = GetTrack(currentSubtitleTrack);
|
|
if (TrackId && TrackId->id) {
|
|
liveSubtitle = new cLiveSubtitle(TrackId->id);
|
|
AttachReceiver(liveSubtitle);
|
|
}
|
|
}
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
void cDevice::EnsureAudioTrack(bool Force)
|
|
{
|
|
if (keepTracks)
|
|
return;
|
|
if (Force || !availableTracks[currentAudioTrack].id) {
|
|
eTrackType PreferredTrack = ttAudioFirst;
|
|
int PreferredAudioChannel = 0;
|
|
int LanguagePreference = -1;
|
|
int StartCheck = Setup.CurrentDolby ? ttDolbyFirst : ttAudioFirst;
|
|
int EndCheck = ttDolbyLast;
|
|
for (int i = StartCheck; i <= EndCheck; i++) {
|
|
const tTrackId *TrackId = GetTrack(eTrackType(i));
|
|
int pos = 0;
|
|
if (TrackId && TrackId->id && I18nIsPreferredLanguage(Setup.AudioLanguages, TrackId->language, LanguagePreference, &pos)) {
|
|
PreferredTrack = eTrackType(i);
|
|
PreferredAudioChannel = pos;
|
|
}
|
|
if (Setup.CurrentDolby && i == ttDolbyLast) {
|
|
i = ttAudioFirst - 1;
|
|
EndCheck = ttAudioLast;
|
|
}
|
|
}
|
|
// Make sure we're set to an available audio track:
|
|
const tTrackId *Track = GetTrack(GetCurrentAudioTrack());
|
|
if (Force || !Track || !Track->id || PreferredTrack != GetCurrentAudioTrack()) {
|
|
if (!Force) // only log this for automatic changes
|
|
dsyslog("setting audio track to %d (%d)", PreferredTrack, PreferredAudioChannel);
|
|
SetCurrentAudioTrack(PreferredTrack);
|
|
SetAudioChannel(PreferredAudioChannel);
|
|
}
|
|
}
|
|
}
|
|
|
|
void cDevice::EnsureSubtitleTrack(void)
|
|
{
|
|
if (keepTracks)
|
|
return;
|
|
if (Setup.DisplaySubtitles) {
|
|
eTrackType PreferredTrack = ttNone;
|
|
int LanguagePreference = INT_MAX; // higher than the maximum possible value
|
|
for (int i = ttSubtitleFirst; i <= ttSubtitleLast; i++) {
|
|
const tTrackId *TrackId = GetTrack(eTrackType(i));
|
|
if (TrackId && TrackId->id && (I18nIsPreferredLanguage(Setup.SubtitleLanguages, TrackId->language, LanguagePreference) ||
|
|
(i == ttSubtitleFirst + 8 && !*TrackId->language && LanguagePreference == INT_MAX))) // compatibility mode for old subtitles plugin
|
|
PreferredTrack = eTrackType(i);
|
|
}
|
|
// Make sure we're set to an available subtitle track:
|
|
const tTrackId *Track = GetTrack(GetCurrentSubtitleTrack());
|
|
if (!Track || !Track->id || PreferredTrack != GetCurrentSubtitleTrack())
|
|
SetCurrentSubtitleTrack(PreferredTrack);
|
|
}
|
|
else
|
|
SetCurrentSubtitleTrack(ttNone);
|
|
}
|
|
|
|
bool cDevice::CanReplay(void) const
|
|
{
|
|
return HasDecoder();
|
|
}
|
|
|
|
bool cDevice::SetPlayMode(ePlayMode PlayMode)
|
|
{
|
|
return false;
|
|
}
|
|
|
|
int64_t cDevice::GetSTC(void)
|
|
{
|
|
return -1;
|
|
}
|
|
|
|
void cDevice::TrickSpeed(int Speed, bool Forward)
|
|
{
|
|
}
|
|
|
|
void cDevice::Clear(void)
|
|
{
|
|
Audios.ClearAudio();
|
|
if (dvbSubtitleConverter)
|
|
dvbSubtitleConverter->Reset();
|
|
}
|
|
|
|
void cDevice::Play(void)
|
|
{
|
|
Audios.MuteAudio(mute);
|
|
if (dvbSubtitleConverter)
|
|
dvbSubtitleConverter->Freeze(false);
|
|
}
|
|
|
|
void cDevice::Freeze(void)
|
|
{
|
|
Audios.MuteAudio(true);
|
|
if (dvbSubtitleConverter)
|
|
dvbSubtitleConverter->Freeze(true);
|
|
}
|
|
|
|
void cDevice::Mute(void)
|
|
{
|
|
Audios.MuteAudio(true);
|
|
}
|
|
|
|
void cDevice::StillPicture(const uchar *Data, int Length)
|
|
{
|
|
if (Data[0] == 0x47) {
|
|
// TS data
|
|
cTsToPes TsToPes;
|
|
uchar *buf = NULL;
|
|
int Size = 0;
|
|
while (Length >= TS_SIZE) {
|
|
int Pid = TsPid(Data);
|
|
if (Pid == PATPID)
|
|
patPmtParser.ParsePat(Data, TS_SIZE);
|
|
else if (patPmtParser.IsPmtPid(Pid))
|
|
patPmtParser.ParsePmt(Data, TS_SIZE);
|
|
else if (Pid == patPmtParser.Vpid()) {
|
|
if (TsPayloadStart(Data)) {
|
|
int l;
|
|
while (const uchar *p = TsToPes.GetPes(l)) {
|
|
int Offset = Size;
|
|
int NewSize = Size + l;
|
|
if (uchar *NewBuffer = (uchar *)realloc(buf, NewSize)) {
|
|
Size = NewSize;
|
|
buf = NewBuffer;
|
|
memcpy(buf + Offset, p, l);
|
|
}
|
|
else {
|
|
LOG_ERROR_STR("out of memory");
|
|
free(buf);
|
|
return;
|
|
}
|
|
}
|
|
TsToPes.Reset();
|
|
}
|
|
TsToPes.PutTs(Data, TS_SIZE);
|
|
}
|
|
Length -= TS_SIZE;
|
|
Data += TS_SIZE;
|
|
}
|
|
int l;
|
|
while (const uchar *p = TsToPes.GetPes(l)) {
|
|
int Offset = Size;
|
|
int NewSize = Size + l;
|
|
if (uchar *NewBuffer = (uchar *)realloc(buf, NewSize)) {
|
|
Size = NewSize;
|
|
buf = NewBuffer;
|
|
memcpy(buf + Offset, p, l);
|
|
}
|
|
else {
|
|
esyslog("ERROR: out of memory");
|
|
free(buf);
|
|
return;
|
|
}
|
|
}
|
|
if (buf) {
|
|
StillPicture(buf, Size);
|
|
free(buf);
|
|
}
|
|
}
|
|
}
|
|
|
|
bool cDevice::Replaying(void) const
|
|
{
|
|
return player != NULL;
|
|
}
|
|
|
|
bool cDevice::Transferring(void) const
|
|
{
|
|
return cTransferControl::ReceiverDevice() != NULL;
|
|
}
|
|
|
|
bool cDevice::AttachPlayer(cPlayer *Player)
|
|
{
|
|
if (CanReplay()) {
|
|
if (player)
|
|
Detach(player);
|
|
DELETENULL(liveSubtitle);
|
|
DELETENULL(dvbSubtitleConverter);
|
|
patPmtParser.Reset();
|
|
player = Player;
|
|
if (!Transferring())
|
|
ClrAvailableTracks(false, true);
|
|
SetPlayMode(player->playMode);
|
|
player->device = this;
|
|
player->Activate(true);
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
void cDevice::Detach(cPlayer *Player)
|
|
{
|
|
if (Player && player == Player) {
|
|
cPlayer *p = player;
|
|
player = NULL; // avoids recursive calls to Detach()
|
|
p->Activate(false);
|
|
p->device = NULL;
|
|
cMutexLock MutexLock(&mutexCurrentSubtitleTrack);
|
|
delete dvbSubtitleConverter;
|
|
dvbSubtitleConverter = NULL;
|
|
SetPlayMode(pmNone);
|
|
SetVideoDisplayFormat(eVideoDisplayFormat(Setup.VideoDisplayFormat));
|
|
PlayTs(NULL, 0);
|
|
patPmtParser.Reset();
|
|
Audios.ClearAudio();
|
|
isPlayingVideo = false;
|
|
}
|
|
}
|
|
|
|
void cDevice::StopReplay(void)
|
|
{
|
|
if (player) {
|
|
Detach(player);
|
|
if (IsPrimaryDevice())
|
|
cControl::Shutdown();
|
|
}
|
|
}
|
|
|
|
bool cDevice::Poll(cPoller &Poller, int TimeoutMs)
|
|
{
|
|
return false;
|
|
}
|
|
|
|
bool cDevice::Flush(int TimeoutMs)
|
|
{
|
|
return true;
|
|
}
|
|
|
|
int cDevice::PlayVideo(const uchar *Data, int Length)
|
|
{
|
|
return -1;
|
|
}
|
|
|
|
int cDevice::PlayAudio(const uchar *Data, int Length, uchar Id)
|
|
{
|
|
return -1;
|
|
}
|
|
|
|
int cDevice::PlaySubtitle(const uchar *Data, int Length)
|
|
{
|
|
if (!dvbSubtitleConverter)
|
|
dvbSubtitleConverter = new cDvbSubtitleConverter;
|
|
return dvbSubtitleConverter->ConvertFragments(Data, Length);
|
|
}
|
|
|
|
int cDevice::PlayPesPacket(const uchar *Data, int Length, bool VideoOnly)
|
|
{
|
|
bool FirstLoop = true;
|
|
uchar c = Data[3];
|
|
const uchar *Start = Data;
|
|
const uchar *End = Start + Length;
|
|
while (Start < End) {
|
|
int d = End - Start;
|
|
int w = d;
|
|
switch (c) {
|
|
case 0xBE: // padding stream, needed for MPEG1
|
|
case 0xE0 ... 0xEF: // video
|
|
isPlayingVideo = true;
|
|
w = PlayVideo(Start, d);
|
|
break;
|
|
case 0xC0 ... 0xDF: // audio
|
|
SetAvailableTrack(ttAudio, c - 0xC0, c);
|
|
if ((!VideoOnly || HasIBPTrickSpeed()) && c == availableTracks[currentAudioTrack].id) {
|
|
w = PlayAudio(Start, d, c);
|
|
if (FirstLoop)
|
|
Audios.PlayAudio(Data, Length, c);
|
|
}
|
|
break;
|
|
case 0xBD: { // private stream 1
|
|
int PayloadOffset = Data[8] + 9;
|
|
|
|
// Compatibility mode for old subtitles plugin:
|
|
if ((Data[7] & 0x01) && (Data[PayloadOffset - 3] & 0x81) == 0x01 && Data[PayloadOffset - 2] == 0x81)
|
|
PayloadOffset--;
|
|
|
|
uchar SubStreamId = Data[PayloadOffset];
|
|
uchar SubStreamType = SubStreamId & 0xF0;
|
|
uchar SubStreamIndex = SubStreamId & 0x1F;
|
|
|
|
// Compatibility mode for old VDR recordings, where 0xBD was only AC3:
|
|
pre_1_3_19_PrivateStreamDetected:
|
|
if (pre_1_3_19_PrivateStream > MIN_PRE_1_3_19_PRIVATESTREAM) {
|
|
SubStreamId = c;
|
|
SubStreamType = 0x80;
|
|
SubStreamIndex = 0;
|
|
}
|
|
else if (pre_1_3_19_PrivateStream)
|
|
pre_1_3_19_PrivateStream--; // every known PS1 packet counts down towards 0 to recover from glitches...
|
|
switch (SubStreamType) {
|
|
case 0x20: // SPU
|
|
case 0x30: // SPU
|
|
SetAvailableTrack(ttSubtitle, SubStreamIndex, SubStreamId);
|
|
if ((!VideoOnly || HasIBPTrickSpeed()) && currentSubtitleTrack != ttNone && SubStreamId == availableTracks[currentSubtitleTrack].id)
|
|
w = PlaySubtitle(Start, d);
|
|
break;
|
|
case 0x80: // AC3 & DTS
|
|
if (Setup.UseDolbyDigital) {
|
|
SetAvailableTrack(ttDolby, SubStreamIndex, SubStreamId);
|
|
if ((!VideoOnly || HasIBPTrickSpeed()) && SubStreamId == availableTracks[currentAudioTrack].id) {
|
|
w = PlayAudio(Start, d, SubStreamId);
|
|
if (FirstLoop)
|
|
Audios.PlayAudio(Data, Length, SubStreamId);
|
|
}
|
|
}
|
|
break;
|
|
case 0xA0: // LPCM
|
|
SetAvailableTrack(ttAudio, SubStreamIndex, SubStreamId);
|
|
if ((!VideoOnly || HasIBPTrickSpeed()) && SubStreamId == availableTracks[currentAudioTrack].id) {
|
|
w = PlayAudio(Start, d, SubStreamId);
|
|
if (FirstLoop)
|
|
Audios.PlayAudio(Data, Length, SubStreamId);
|
|
}
|
|
break;
|
|
default:
|
|
// Compatibility mode for old VDR recordings, where 0xBD was only AC3:
|
|
if (pre_1_3_19_PrivateStream <= MIN_PRE_1_3_19_PRIVATESTREAM) {
|
|
dsyslog("unknown PS1 packet, substream id = %02X (counter is at %d)", SubStreamId, pre_1_3_19_PrivateStream);
|
|
pre_1_3_19_PrivateStream += 2; // ...and every unknown PS1 packet counts up (the very first one counts twice, but that's ok)
|
|
if (pre_1_3_19_PrivateStream > MIN_PRE_1_3_19_PRIVATESTREAM) {
|
|
dsyslog("switching to pre 1.3.19 Dolby Digital compatibility mode - substream id = %02X", SubStreamId);
|
|
ClrAvailableTracks();
|
|
pre_1_3_19_PrivateStream = MIN_PRE_1_3_19_PRIVATESTREAM + 1;
|
|
goto pre_1_3_19_PrivateStreamDetected;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
break;
|
|
default:
|
|
;//esyslog("ERROR: unexpected packet id %02X", c);
|
|
}
|
|
if (w > 0)
|
|
Start += w;
|
|
else {
|
|
if (Start != Data)
|
|
esyslog("ERROR: incomplete PES packet write!");
|
|
return Start == Data ? w : Start - Data;
|
|
}
|
|
FirstLoop = false;
|
|
}
|
|
return Length;
|
|
}
|
|
|
|
int cDevice::PlayPes(const uchar *Data, int Length, bool VideoOnly)
|
|
{
|
|
if (!Data) {
|
|
if (dvbSubtitleConverter)
|
|
dvbSubtitleConverter->Reset();
|
|
return 0;
|
|
}
|
|
int i = 0;
|
|
while (i <= Length - 6) {
|
|
if (Data[i] == 0x00 && Data[i + 1] == 0x00 && Data[i + 2] == 0x01) {
|
|
int l = PesLength(Data + i);
|
|
if (i + l > Length) {
|
|
esyslog("ERROR: incomplete PES packet!");
|
|
return Length;
|
|
}
|
|
int w = PlayPesPacket(Data + i, l, VideoOnly);
|
|
if (w > 0)
|
|
i += l;
|
|
else
|
|
return i == 0 ? w : i;
|
|
}
|
|
else
|
|
i++;
|
|
}
|
|
if (i < Length)
|
|
esyslog("ERROR: leftover PES data!");
|
|
return Length;
|
|
}
|
|
|
|
int cDevice::PlayTsVideo(const uchar *Data, int Length)
|
|
{
|
|
// Video PES has no explicit length, so we can only determine the end of
|
|
// a PES packet when the next TS packet that starts a payload comes in:
|
|
if (TsPayloadStart(Data)) {
|
|
int l;
|
|
while (const uchar *p = tsToPesVideo.GetPes(l)) {
|
|
int w = PlayVideo(p, l);
|
|
if (w <= 0) {
|
|
tsToPesVideo.SetRepeatLast();
|
|
return w;
|
|
}
|
|
}
|
|
tsToPesVideo.Reset();
|
|
}
|
|
tsToPesVideo.PutTs(Data, Length);
|
|
return Length;
|
|
}
|
|
|
|
int cDevice::PlayTsAudio(const uchar *Data, int Length)
|
|
{
|
|
// Audio PES always has an explicit length and consists of single packets:
|
|
int l;
|
|
if (const uchar *p = tsToPesAudio.GetPes(l)) {
|
|
int w = PlayAudio(p, l, p[3]);
|
|
if (w <= 0) {
|
|
tsToPesAudio.SetRepeatLast();
|
|
return w;
|
|
}
|
|
tsToPesAudio.Reset();
|
|
}
|
|
tsToPesAudio.PutTs(Data, Length);
|
|
return Length;
|
|
}
|
|
|
|
int cDevice::PlayTsSubtitle(const uchar *Data, int Length)
|
|
{
|
|
if (!dvbSubtitleConverter)
|
|
dvbSubtitleConverter = new cDvbSubtitleConverter;
|
|
tsToPesSubtitle.PutTs(Data, Length);
|
|
int l;
|
|
if (const uchar *p = tsToPesSubtitle.GetPes(l)) {
|
|
dvbSubtitleConverter->Convert(p, l);
|
|
tsToPesSubtitle.Reset();
|
|
}
|
|
return Length;
|
|
}
|
|
|
|
//TODO detect and report continuity errors?
|
|
int cDevice::PlayTs(const uchar *Data, int Length, bool VideoOnly)
|
|
{
|
|
int Played = 0;
|
|
if (!Data) {
|
|
tsToPesVideo.Reset();
|
|
tsToPesAudio.Reset();
|
|
tsToPesSubtitle.Reset();
|
|
}
|
|
else if (Length < TS_SIZE) {
|
|
esyslog("ERROR: skipped %d bytes of TS fragment", Length);
|
|
return Length;
|
|
}
|
|
else {
|
|
while (Length >= TS_SIZE) {
|
|
if (Data[0] != TS_SYNC_BYTE) {
|
|
int Skipped = 1;
|
|
while (Skipped < Length && (Data[Skipped] != TS_SYNC_BYTE || Length - Skipped > TS_SIZE && Data[Skipped + TS_SIZE] != TS_SYNC_BYTE))
|
|
Skipped++;
|
|
esyslog("ERROR: skipped %d bytes to sync on start of TS packet", Skipped);
|
|
return Played + Skipped;
|
|
}
|
|
int Pid = TsPid(Data);
|
|
if (TsHasPayload(Data)) { // silently ignore TS packets w/o payload
|
|
int PayloadOffset = TsPayloadOffset(Data);
|
|
if (PayloadOffset < TS_SIZE) {
|
|
if (Pid == PATPID)
|
|
patPmtParser.ParsePat(Data, TS_SIZE);
|
|
else if (patPmtParser.IsPmtPid(Pid))
|
|
patPmtParser.ParsePmt(Data, TS_SIZE);
|
|
else if (Pid == patPmtParser.Vpid()) {
|
|
isPlayingVideo = true;
|
|
int w = PlayTsVideo(Data, TS_SIZE);
|
|
if (w < 0)
|
|
return Played ? Played : w;
|
|
if (w == 0)
|
|
break;
|
|
}
|
|
else if (Pid == availableTracks[currentAudioTrack].id) {
|
|
if (!VideoOnly || HasIBPTrickSpeed()) {
|
|
int w = PlayTsAudio(Data, TS_SIZE);
|
|
if (w < 0)
|
|
return Played ? Played : w;
|
|
if (w == 0)
|
|
break;
|
|
Audios.PlayTsAudio(Data, TS_SIZE);
|
|
}
|
|
}
|
|
else if (Pid == availableTracks[currentSubtitleTrack].id) {
|
|
if (!VideoOnly || HasIBPTrickSpeed())
|
|
PlayTsSubtitle(Data, TS_SIZE);
|
|
}
|
|
}
|
|
}
|
|
else if (Pid == patPmtParser.Ppid()) {
|
|
int w = PlayTsVideo(Data, TS_SIZE);
|
|
if (w < 0)
|
|
return Played ? Played : w;
|
|
if (w == 0)
|
|
break;
|
|
}
|
|
Played += TS_SIZE;
|
|
Length -= TS_SIZE;
|
|
Data += TS_SIZE;
|
|
}
|
|
}
|
|
return Played;
|
|
}
|
|
|
|
int cDevice::Priority(void) const
|
|
{
|
|
int priority = IDLEPRIORITY;
|
|
if (IsPrimaryDevice() && !Replaying() && HasProgramme())
|
|
priority = TRANSFERPRIORITY; // we use the same value here, no matter whether it's actual Transfer Mode or real live viewing
|
|
cMutexLock MutexLock(&mutexReceiver);
|
|
for (int i = 0; i < MAXRECEIVERS; i++) {
|
|
if (receiver[i])
|
|
priority = max(receiver[i]->priority, priority);
|
|
}
|
|
return priority;
|
|
}
|
|
|
|
bool cDevice::Ready(void)
|
|
{
|
|
return true;
|
|
}
|
|
|
|
bool cDevice::Receiving(bool Dummy) const
|
|
{
|
|
cMutexLock MutexLock(&mutexReceiver);
|
|
for (int i = 0; i < MAXRECEIVERS; i++) {
|
|
if (receiver[i])
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
#define TS_SCRAMBLING_TIMEOUT 3 // seconds to wait until a TS becomes unscrambled
|
|
#define TS_SCRAMBLING_TIME_OK 10 // seconds before a Channel/CAM combination is marked as known to decrypt
|
|
|
|
void cDevice::Action(void)
|
|
{
|
|
if (Running() && OpenDvr()) {
|
|
while (Running()) {
|
|
// Read data from the DVR device:
|
|
uchar *b = NULL;
|
|
if (GetTSPacket(b)) {
|
|
if (b) {
|
|
int Pid = TsPid(b);
|
|
// Check whether the TS packets are scrambled:
|
|
bool DetachReceivers = false;
|
|
bool DescramblingOk = false;
|
|
int CamSlotNumber = 0;
|
|
if (startScrambleDetection) {
|
|
cCamSlot *cs = CamSlot();
|
|
CamSlotNumber = cs ? cs->SlotNumber() : 0;
|
|
if (CamSlotNumber) {
|
|
bool Scrambled = b[3] & TS_SCRAMBLING_CONTROL;
|
|
int t = time(NULL) - startScrambleDetection;
|
|
if (Scrambled) {
|
|
if (t > TS_SCRAMBLING_TIMEOUT)
|
|
DetachReceivers = true;
|
|
}
|
|
else if (t > TS_SCRAMBLING_TIME_OK) {
|
|
DescramblingOk = true;
|
|
startScrambleDetection = 0;
|
|
}
|
|
}
|
|
}
|
|
// Distribute the packet to all attached receivers:
|
|
Lock();
|
|
for (int i = 0; i < MAXRECEIVERS; i++) {
|
|
if (receiver[i] && receiver[i]->WantsPid(Pid)) {
|
|
if (DetachReceivers) {
|
|
dsyslog("detaching receiver - won't decrypt channel %s with CAM %d", *receiver[i]->ChannelID().ToString(), CamSlotNumber);
|
|
ChannelCamRelations.SetChecked(receiver[i]->ChannelID(), CamSlotNumber);
|
|
Detach(receiver[i]);
|
|
}
|
|
else
|
|
receiver[i]->Receive(b, TS_SIZE);
|
|
if (DescramblingOk)
|
|
ChannelCamRelations.SetDecrypt(receiver[i]->ChannelID(), CamSlotNumber);
|
|
}
|
|
}
|
|
Unlock();
|
|
}
|
|
}
|
|
else
|
|
break;
|
|
}
|
|
CloseDvr();
|
|
}
|
|
}
|
|
|
|
bool cDevice::OpenDvr(void)
|
|
{
|
|
return false;
|
|
}
|
|
|
|
void cDevice::CloseDvr(void)
|
|
{
|
|
}
|
|
|
|
bool cDevice::GetTSPacket(uchar *&Data)
|
|
{
|
|
return false;
|
|
}
|
|
|
|
bool cDevice::AttachReceiver(cReceiver *Receiver)
|
|
{
|
|
if (!Receiver)
|
|
return false;
|
|
if (Receiver->device == this)
|
|
return true;
|
|
// activate the following line if you need it - actually the driver should be fixed!
|
|
//#define WAIT_FOR_TUNER_LOCK
|
|
#ifdef WAIT_FOR_TUNER_LOCK
|
|
#define TUNER_LOCK_TIMEOUT 5000 // ms
|
|
if (!HasLock(TUNER_LOCK_TIMEOUT)) {
|
|
esyslog("ERROR: device %d has no lock, can't attach receiver!", CardIndex() + 1);
|
|
return false;
|
|
}
|
|
#endif
|
|
cMutexLock MutexLock(&mutexReceiver);
|
|
for (int i = 0; i < MAXRECEIVERS; i++) {
|
|
if (!receiver[i]) {
|
|
for (int n = 0; n < Receiver->numPids; n++) {
|
|
if (!AddPid(Receiver->pids[n])) {
|
|
for ( ; n-- > 0; )
|
|
DelPid(Receiver->pids[n]);
|
|
return false;
|
|
}
|
|
}
|
|
Receiver->Activate(true);
|
|
Lock();
|
|
Receiver->device = this;
|
|
receiver[i] = Receiver;
|
|
Unlock();
|
|
if (camSlot && Receiver->priority > MINPRIORITY) { // priority check to avoid an infinite loop with the CAM slot's caPidReceiver
|
|
camSlot->StartDecrypting();
|
|
startScrambleDetection = time(NULL);
|
|
}
|
|
Start();
|
|
return true;
|
|
}
|
|
}
|
|
esyslog("ERROR: no free receiver slot!");
|
|
return false;
|
|
}
|
|
|
|
void cDevice::Detach(cReceiver *Receiver)
|
|
{
|
|
if (!Receiver || Receiver->device != this)
|
|
return;
|
|
bool receiversLeft = false;
|
|
cMutexLock MutexLock(&mutexReceiver);
|
|
for (int i = 0; i < MAXRECEIVERS; i++) {
|
|
if (receiver[i] == Receiver) {
|
|
Lock();
|
|
receiver[i] = NULL;
|
|
Receiver->device = NULL;
|
|
Unlock();
|
|
Receiver->Activate(false);
|
|
for (int n = 0; n < Receiver->numPids; n++)
|
|
DelPid(Receiver->pids[n]);
|
|
}
|
|
else if (receiver[i])
|
|
receiversLeft = true;
|
|
}
|
|
if (camSlot) {
|
|
if (Receiver->priority > MINPRIORITY) // priority check to avoid an infinite loop with the CAM slot's caPidReceiver
|
|
camSlot->StartDecrypting();
|
|
if (!camSlot->IsDecrypting())
|
|
camSlot->Assign(NULL);
|
|
}
|
|
if (!receiversLeft)
|
|
Cancel(-1);
|
|
}
|
|
|
|
void cDevice::DetachAll(int Pid)
|
|
{
|
|
if (Pid) {
|
|
cMutexLock MutexLock(&mutexReceiver);
|
|
for (int i = 0; i < MAXRECEIVERS; i++) {
|
|
cReceiver *Receiver = receiver[i];
|
|
if (Receiver && Receiver->WantsPid(Pid))
|
|
Detach(Receiver);
|
|
}
|
|
}
|
|
}
|
|
|
|
void cDevice::DetachAllReceivers(void)
|
|
{
|
|
cMutexLock MutexLock(&mutexReceiver);
|
|
for (int i = 0; i < MAXRECEIVERS; i++)
|
|
Detach(receiver[i]);
|
|
}
|
|
|
|
// --- cTSBuffer -------------------------------------------------------------
|
|
|
|
cTSBuffer::cTSBuffer(int File, int Size, int CardIndex)
|
|
{
|
|
SetDescription("TS buffer on device %d", CardIndex);
|
|
f = File;
|
|
cardIndex = CardIndex;
|
|
delivered = false;
|
|
ringBuffer = new cRingBufferLinear(Size, TS_SIZE, true, "TS");
|
|
ringBuffer->SetTimeouts(100, 100);
|
|
ringBuffer->SetIoThrottle();
|
|
Start();
|
|
}
|
|
|
|
cTSBuffer::~cTSBuffer()
|
|
{
|
|
Cancel(3);
|
|
delete ringBuffer;
|
|
}
|
|
|
|
void cTSBuffer::Action(void)
|
|
{
|
|
if (ringBuffer) {
|
|
bool firstRead = true;
|
|
cPoller Poller(f);
|
|
while (Running()) {
|
|
if (firstRead || Poller.Poll(100)) {
|
|
firstRead = false;
|
|
int r = ringBuffer->Read(f);
|
|
if (r < 0 && FATALERRNO) {
|
|
if (errno == EOVERFLOW)
|
|
esyslog("ERROR: driver buffer overflow on device %d", cardIndex);
|
|
else {
|
|
LOG_ERROR;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
uchar *cTSBuffer::Get(int *Available)
|
|
{
|
|
int Count = 0;
|
|
if (delivered) {
|
|
ringBuffer->Del(TS_SIZE);
|
|
delivered = false;
|
|
}
|
|
uchar *p = ringBuffer->Get(Count);
|
|
if (p && Count >= TS_SIZE) {
|
|
if (*p != TS_SYNC_BYTE) {
|
|
for (int i = 1; i < Count; i++) {
|
|
if (p[i] == TS_SYNC_BYTE) {
|
|
Count = i;
|
|
break;
|
|
}
|
|
}
|
|
ringBuffer->Del(Count);
|
|
esyslog("ERROR: skipped %d bytes to sync on TS packet on device %d", Count, cardIndex);
|
|
return NULL;
|
|
}
|
|
delivered = true;
|
|
if (Available)
|
|
*Available = Count;
|
|
return p;
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
void cTSBuffer::Skip(int Count)
|
|
{
|
|
ringBuffer->Del(Count);
|
|
delivered = false;
|
|
}
|