mirror of
https://github.com/vdr-projects/vdr.git
synced 2025-03-01 10:50:46 +00:00
Original announce message: VDR developer version 1.7.22 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.22.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.21-1.7.22.diff MD5 checksums: b9c0fe1aac8e653c0d0234bc72c2bb2c vdr-1.7.22.tar.bz2 868bb332342c9a78beda17cc85e0bb93 vdr-1.7.21-1.7.22.diff WARNING: ======== This is a developer version. Even though I use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging. From the HISTORY file: - Fixed scaling subtitles in case the primary device's GetVideoSize() function doesn't return actual values (thanks to Luca Olivetti). - The DiSEqC codes are now copied in the call to cDiseqc::Execute(). - VDR now supports "Satellite Channel Routing" (SCR) according to EN50494 (based on the "unicable" patch from Lars Hanisch). Since "Unicable" is a registered trademark and stands for only one of many implementations of SCR, the following changes have been made compared to the patch, which need to be taken into account by people who have set up their system using the patch: - The 'U' parameter in the diseqc.conf file has been changed to 'S' ("Scr"). - The configuration file name has been changed from "unicable.conf" to "scr.conf". - Updated sources.conf (thanks to Arthur Konovalov). - The SVDRP command LSTC now also accepts channel IDs (thanks to Dominic Evans). - Fixed handling DVB subtitles and implemented decoding textual DVB subtitles (thanks to Rolf Ahrenberg). - Added cap_net_raw to the capabilities that are not dropped (thanks to Dominic Evans). - Fixed setting the start time of an edited recording (thanks to Christoph Haubrich). - Temporarily switching free devices to transponders in order to have their running status updated is now done by marking the devices as "occupied" for a certain amount of time. - The new setup options "LNB/Device n connected to sat cable" can be used to define which DVB-S devices are connected to the same sat cable and are therefore "bonded". This obsoletes the LNBSHARE patch. Users of the LNBSHARE patch will need to newly set up their sat devices with the above options. - Fixed a crash when deleting a recording while cutting it (thanks to Ville Skyttä). - Fixed several spelling errors (thanks to Ville Skyttä). - The new SVDRP command UPDR can be used to trigger an update of the list of recordings (thanks to Lars Hanisch). - Added generating a pkg-config file to the Makefile (thanks to Ville Skyttä). - Removed the '.pl' suffix from all scripts (thanks to Ville Skyttä). - Changed the default location for the LIRC socket to /var/run/lirc/lircd (thanks to Ville Skyttä). - Added file name and line number to LOG_ERROR_STR() (thanks to Rolf Ahrenberg). - Replaced all calls to sleep() with cCondWait::SleepMs() (thanks to Rolf Ahrenberg). - Fixed a crash with malformed SI data (patch from vdr-portal).
1736 lines
52 KiB
C
1736 lines
52 KiB
C
/*
|
|
* device.c: The basic device interface
|
|
*
|
|
* See the main source file 'vdr.c' for copyright information and
|
|
* how to reach the author.
|
|
*
|
|
* $Id: device.c 2.44 2011/10/16 14:36:43 kls Exp $
|
|
*/
|
|
|
|
#include "device.h"
|
|
#include <errno.h>
|
|
#include <sys/ioctl.h>
|
|
#include <sys/mman.h>
|
|
#include "audio.h"
|
|
#include "channels.h"
|
|
#include "i18n.h"
|
|
#include "player.h"
|
|
#include "receiver.h"
|
|
#include "status.h"
|
|
#include "transfer.h"
|
|
|
|
// --- cLiveSubtitle ---------------------------------------------------------
|
|
|
|
class cLiveSubtitle : public cReceiver {
|
|
protected:
|
|
virtual void Receive(uchar *Data, int Length);
|
|
public:
|
|
cLiveSubtitle(int SPid);
|
|
virtual ~cLiveSubtitle();
|
|
};
|
|
|
|
cLiveSubtitle::cLiveSubtitle(int SPid)
|
|
{
|
|
AddPid(SPid);
|
|
}
|
|
|
|
cLiveSubtitle::~cLiveSubtitle()
|
|
{
|
|
cReceiver::Detach();
|
|
}
|
|
|
|
void cLiveSubtitle::Receive(uchar *Data, int Length)
|
|
{
|
|
cDevice::PrimaryDevice()->PlayTs(Data, Length);
|
|
}
|
|
|
|
// --- cDeviceHook -----------------------------------------------------------
|
|
|
|
cDeviceHook::cDeviceHook(void)
|
|
{
|
|
cDevice::deviceHooks.Add(this);
|
|
}
|
|
|
|
bool cDeviceHook::DeviceProvidesTransponder(const cDevice *Device, const cChannel *Channel) const
|
|
{
|
|
return true;
|
|
}
|
|
|
|
// --- cDevice ---------------------------------------------------------------
|
|
|
|
// The default priority for non-primary devices:
|
|
#define DEFAULTPRIORITY -1
|
|
|
|
// The minimum number of unknown PS1 packets to consider this a "pre 1.3.19 private stream":
|
|
#define MIN_PRE_1_3_19_PRIVATESTREAM 10
|
|
|
|
int cDevice::numDevices = 0;
|
|
int cDevice::useDevice = 0;
|
|
int cDevice::nextCardIndex = 0;
|
|
int cDevice::currentChannel = 1;
|
|
cDevice *cDevice::device[MAXDEVICES] = { NULL };
|
|
cDevice *cDevice::primaryDevice = NULL;
|
|
cDevice *cDevice::avoidDevice = NULL;
|
|
cList<cDeviceHook> cDevice::deviceHooks;
|
|
|
|
cDevice::cDevice(void)
|
|
:patPmtParser(true)
|
|
{
|
|
cardIndex = nextCardIndex++;
|
|
dsyslog("new device number %d", CardIndex() + 1);
|
|
|
|
SetDescription("receiver on device %d", CardIndex() + 1);
|
|
|
|
SetVideoFormat(Setup.VideoFormat);
|
|
|
|
mute = false;
|
|
volume = Setup.CurrentVolume;
|
|
|
|
sectionHandler = NULL;
|
|
eitFilter = NULL;
|
|
patFilter = NULL;
|
|
sdtFilter = NULL;
|
|
nitFilter = NULL;
|
|
|
|
camSlot = NULL;
|
|
startScrambleDetection = 0;
|
|
|
|
occupiedTimeout = 0;
|
|
|
|
player = NULL;
|
|
isPlayingVideo = false;
|
|
ClrAvailableTracks();
|
|
currentAudioTrack = ttNone;
|
|
currentAudioTrackMissingCount = 0;
|
|
currentSubtitleTrack = ttNone;
|
|
liveSubtitle = NULL;
|
|
dvbSubtitleConverter = NULL;
|
|
autoSelectPreferredSubtitleLanguage = true;
|
|
|
|
for (int i = 0; i < MAXRECEIVERS; i++)
|
|
receiver[i] = NULL;
|
|
|
|
if (numDevices < MAXDEVICES)
|
|
device[numDevices++] = this;
|
|
else
|
|
esyslog("ERROR: too many devices!");
|
|
}
|
|
|
|
cDevice::~cDevice()
|
|
{
|
|
Detach(player);
|
|
DetachAllReceivers();
|
|
delete liveSubtitle;
|
|
delete dvbSubtitleConverter;
|
|
}
|
|
|
|
bool cDevice::WaitForAllDevicesReady(int Timeout)
|
|
{
|
|
for (time_t t0 = time(NULL); time(NULL) - t0 < Timeout; ) {
|
|
bool ready = true;
|
|
for (int i = 0; i < numDevices; i++) {
|
|
if (device[i] && !device[i]->Ready()) {
|
|
ready = false;
|
|
cCondWait::SleepMs(100);
|
|
}
|
|
}
|
|
if (ready)
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
void cDevice::SetUseDevice(int n)
|
|
{
|
|
if (n < MAXDEVICES)
|
|
useDevice |= (1 << n);
|
|
}
|
|
|
|
int cDevice::NextCardIndex(int n)
|
|
{
|
|
if (n > 0) {
|
|
nextCardIndex += n;
|
|
if (nextCardIndex >= MAXDEVICES)
|
|
esyslog("ERROR: nextCardIndex too big (%d)", nextCardIndex);
|
|
}
|
|
else if (n < 0)
|
|
esyslog("ERROR: invalid value in nextCardIndex(%d)", n);
|
|
return nextCardIndex;
|
|
}
|
|
|
|
int cDevice::DeviceNumber(void) const
|
|
{
|
|
for (int i = 0; i < numDevices; i++) {
|
|
if (device[i] == this)
|
|
return i;
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
void cDevice::MakePrimaryDevice(bool On)
|
|
{
|
|
if (!On) {
|
|
DELETENULL(liveSubtitle);
|
|
DELETENULL(dvbSubtitleConverter);
|
|
}
|
|
}
|
|
|
|
bool cDevice::SetPrimaryDevice(int n)
|
|
{
|
|
n--;
|
|
if (0 <= n && n < numDevices && device[n]) {
|
|
isyslog("setting primary device to %d", n + 1);
|
|
if (primaryDevice)
|
|
primaryDevice->MakePrimaryDevice(false);
|
|
primaryDevice = device[n];
|
|
primaryDevice->MakePrimaryDevice(true);
|
|
primaryDevice->SetVideoFormat(Setup.VideoFormat);
|
|
primaryDevice->SetVolumeDevice(Setup.CurrentVolume);
|
|
return true;
|
|
}
|
|
esyslog("ERROR: invalid primary device number: %d", n + 1);
|
|
return false;
|
|
}
|
|
|
|
bool cDevice::HasDecoder(void) const
|
|
{
|
|
return false;
|
|
}
|
|
|
|
cSpuDecoder *cDevice::GetSpuDecoder(void)
|
|
{
|
|
return NULL;
|
|
}
|
|
|
|
cDevice *cDevice::ActualDevice(void)
|
|
{
|
|
cDevice *d = cTransferControl::ReceiverDevice();
|
|
if (!d)
|
|
d = PrimaryDevice();
|
|
return d;
|
|
}
|
|
|
|
cDevice *cDevice::GetDevice(int Index)
|
|
{
|
|
return (0 <= Index && Index < numDevices) ? device[Index] : NULL;
|
|
}
|
|
|
|
static int GetClippedNumProvidedSystems(int AvailableBits, cDevice *Device)
|
|
{
|
|
int MaxNumProvidedSystems = (1 << AvailableBits) - 1;
|
|
int NumProvidedSystems = Device->NumProvidedSystems();
|
|
if (NumProvidedSystems > MaxNumProvidedSystems) {
|
|
esyslog("ERROR: device %d supports %d modulation systems but cDevice::GetDevice() currently only supports %d delivery systems which should be fixed", Device->CardIndex() + 1, NumProvidedSystems, MaxNumProvidedSystems);
|
|
NumProvidedSystems = MaxNumProvidedSystems;
|
|
}
|
|
else if (NumProvidedSystems <= 0) {
|
|
esyslog("ERROR: device %d reported an invalid number (%d) of supported delivery systems - assuming 1", Device->CardIndex() + 1, NumProvidedSystems);
|
|
NumProvidedSystems = 1;
|
|
}
|
|
return NumProvidedSystems;
|
|
}
|
|
|
|
cDevice *cDevice::GetDevice(const cChannel *Channel, int Priority, bool LiveView)
|
|
{
|
|
cDevice *AvoidDevice = avoidDevice;
|
|
avoidDevice = NULL;
|
|
// Collect the current priorities of all CAM slots that can decrypt the channel:
|
|
int NumCamSlots = CamSlots.Count();
|
|
int SlotPriority[NumCamSlots];
|
|
int NumUsableSlots = 0;
|
|
if (Channel->Ca() >= CA_ENCRYPTED_MIN) {
|
|
for (cCamSlot *CamSlot = CamSlots.First(); CamSlot; CamSlot = CamSlots.Next(CamSlot)) {
|
|
SlotPriority[CamSlot->Index()] = MAXPRIORITY + 1; // assumes it can't be used
|
|
if (CamSlot->ModuleStatus() == msReady) {
|
|
if (CamSlot->ProvidesCa(Channel->Caids())) {
|
|
if (!ChannelCamRelations.CamChecked(Channel->GetChannelID(), CamSlot->SlotNumber())) {
|
|
SlotPriority[CamSlot->Index()] = CamSlot->Priority();
|
|
NumUsableSlots++;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
if (!NumUsableSlots)
|
|
return NULL; // no CAM is able to decrypt this channel
|
|
}
|
|
|
|
bool NeedsDetachReceivers = false;
|
|
cDevice *d = NULL;
|
|
cCamSlot *s = NULL;
|
|
|
|
uint32_t Impact = 0xFFFFFFFF; // we're looking for a device with the least impact
|
|
for (int j = 0; j < NumCamSlots || !NumUsableSlots; j++) {
|
|
if (NumUsableSlots && SlotPriority[j] > MAXPRIORITY)
|
|
continue; // there is no CAM available in this slot
|
|
for (int i = 0; i < numDevices; i++) {
|
|
if (device[i] == AvoidDevice)
|
|
continue; // this device shall be temporarily avoided
|
|
if (Channel->Ca() && Channel->Ca() <= CA_DVB_MAX && Channel->Ca() != device[i]->CardIndex() + 1)
|
|
continue; // a specific card was requested, but not this one
|
|
if (NumUsableSlots && !CamSlots.Get(j)->Assign(device[i], true))
|
|
continue; // CAM slot can't be used with this device
|
|
bool ndr;
|
|
if (device[i]->ProvidesChannel(Channel, Priority, &ndr)) { // this device is basicly able to do the job
|
|
if (NumUsableSlots && device[i]->CamSlot() && device[i]->CamSlot() != CamSlots.Get(j))
|
|
ndr = true; // using a different CAM slot requires detaching receivers
|
|
// Put together an integer number that reflects the "impact" using
|
|
// this device would have on the overall system. Each condition is represented
|
|
// by one bit in the number (or several bits, if the condition is actually
|
|
// a numeric value). The sequence in which the conditions are listed corresponds
|
|
// to their individual severity, where the one listed first will make the most
|
|
// difference, because it results in the most significant bit of the result.
|
|
uint32_t imp = 0;
|
|
imp <<= 1; imp |= LiveView ? !device[i]->IsPrimaryDevice() || ndr : 0; // prefer the primary device for live viewing if we don't need to detach existing receivers
|
|
imp <<= 1; imp |= !device[i]->Receiving() && (device[i] != cTransferControl::ReceiverDevice() || device[i]->IsPrimaryDevice()) || ndr; // use receiving devices if we don't need to detach existing receivers, but avoid primary device in local transfer mode
|
|
imp <<= 1; imp |= device[i]->Receiving(); // avoid devices that are receiving
|
|
imp <<= 4; imp |= GetClippedNumProvidedSystems(4, device[i]) - 1; // avoid cards which support multiple delivery systems
|
|
imp <<= 1; imp |= device[i] == cTransferControl::ReceiverDevice(); // avoid the Transfer Mode receiver device
|
|
imp <<= 8; imp |= min(max(device[i]->Priority() + MAXPRIORITY, 0), 0xFF); // use the device with the lowest priority (+MAXPRIORITY to assure that values -99..99 can be used)
|
|
imp <<= 8; imp |= min(max((NumUsableSlots ? SlotPriority[j] : 0) + MAXPRIORITY, 0), 0xFF); // use the CAM slot with the lowest priority (+MAXPRIORITY to assure that values -99..99 can be used)
|
|
imp <<= 1; imp |= ndr; // avoid devices if we need to detach existing receivers
|
|
imp <<= 1; imp |= NumUsableSlots ? 0 : device[i]->HasCi(); // avoid cards with Common Interface for FTA channels
|
|
imp <<= 1; imp |= device[i]->AvoidRecording(); // avoid SD full featured cards
|
|
imp <<= 1; imp |= NumUsableSlots ? !ChannelCamRelations.CamDecrypt(Channel->GetChannelID(), j + 1) : 0; // prefer CAMs that are known to decrypt this channel
|
|
imp <<= 1; imp |= device[i]->IsPrimaryDevice(); // avoid the primary device
|
|
if (imp < Impact) {
|
|
// This device has less impact than any previous one, so we take it.
|
|
Impact = imp;
|
|
d = device[i];
|
|
NeedsDetachReceivers = ndr;
|
|
if (NumUsableSlots)
|
|
s = CamSlots.Get(j);
|
|
}
|
|
}
|
|
}
|
|
if (!NumUsableSlots)
|
|
break; // no CAM necessary, so just one loop over the devices
|
|
}
|
|
if (d) {
|
|
if (NeedsDetachReceivers)
|
|
d->DetachAllReceivers();
|
|
if (s) {
|
|
if (s->Device() != d) {
|
|
if (s->Device())
|
|
s->Device()->DetachAllReceivers();
|
|
if (d->CamSlot())
|
|
d->CamSlot()->Assign(NULL);
|
|
s->Assign(d);
|
|
}
|
|
}
|
|
else if (d->CamSlot() && !d->CamSlot()->IsDecrypting())
|
|
d->CamSlot()->Assign(NULL);
|
|
}
|
|
return d;
|
|
}
|
|
|
|
bool cDevice::HasCi(void)
|
|
{
|
|
return false;
|
|
}
|
|
|
|
void cDevice::SetCamSlot(cCamSlot *CamSlot)
|
|
{
|
|
camSlot = CamSlot;
|
|
}
|
|
|
|
void cDevice::Shutdown(void)
|
|
{
|
|
primaryDevice = NULL;
|
|
for (int i = 0; i < numDevices; i++) {
|
|
delete device[i];
|
|
device[i] = NULL;
|
|
}
|
|
}
|
|
|
|
uchar *cDevice::GrabImage(int &Size, bool Jpeg, int Quality, int SizeX, int SizeY)
|
|
{
|
|
return NULL;
|
|
}
|
|
|
|
bool cDevice::GrabImageFile(const char *FileName, bool Jpeg, int Quality, int SizeX, int SizeY)
|
|
{
|
|
int result = 0;
|
|
int fd = open(FileName, O_WRONLY | O_CREAT | O_NOFOLLOW | O_TRUNC, DEFFILEMODE);
|
|
if (fd >= 0) {
|
|
int ImageSize;
|
|
uchar *Image = GrabImage(ImageSize, Jpeg, Quality, SizeX, SizeY);
|
|
if (Image) {
|
|
if (safe_write(fd, Image, ImageSize) == ImageSize)
|
|
isyslog("grabbed image to %s", FileName);
|
|
else {
|
|
LOG_ERROR_STR(FileName);
|
|
result |= 1;
|
|
}
|
|
free(Image);
|
|
}
|
|
else
|
|
result |= 1;
|
|
close(fd);
|
|
}
|
|
else {
|
|
LOG_ERROR_STR(FileName);
|
|
result |= 1;
|
|
}
|
|
return result == 0;
|
|
}
|
|
|
|
void cDevice::SetVideoDisplayFormat(eVideoDisplayFormat VideoDisplayFormat)
|
|
{
|
|
cSpuDecoder *spuDecoder = GetSpuDecoder();
|
|
if (spuDecoder) {
|
|
if (Setup.VideoFormat)
|
|
spuDecoder->setScaleMode(cSpuDecoder::eSpuNormal);
|
|
else {
|
|
switch (VideoDisplayFormat) {
|
|
case vdfPanAndScan:
|
|
spuDecoder->setScaleMode(cSpuDecoder::eSpuPanAndScan);
|
|
break;
|
|
case vdfLetterBox:
|
|
spuDecoder->setScaleMode(cSpuDecoder::eSpuLetterBox);
|
|
break;
|
|
case vdfCenterCutOut:
|
|
spuDecoder->setScaleMode(cSpuDecoder::eSpuNormal);
|
|
break;
|
|
default: esyslog("ERROR: invalid value for VideoDisplayFormat '%d'", VideoDisplayFormat);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
void cDevice::SetVideoFormat(bool VideoFormat16_9)
|
|
{
|
|
}
|
|
|
|
eVideoSystem cDevice::GetVideoSystem(void)
|
|
{
|
|
return vsPAL;
|
|
}
|
|
|
|
void cDevice::GetVideoSize(int &Width, int &Height, double &VideoAspect)
|
|
{
|
|
Width = 0;
|
|
Height = 0;
|
|
VideoAspect = 1.0;
|
|
}
|
|
|
|
void cDevice::GetOsdSize(int &Width, int &Height, double &PixelAspect)
|
|
{
|
|
Width = 720;
|
|
Height = 480;
|
|
PixelAspect = 1.0;
|
|
}
|
|
|
|
//#define PRINTPIDS(s) { char b[500]; char *q = b; q += sprintf(q, "%d %s ", CardIndex(), s); for (int i = 0; i < MAXPIDHANDLES; i++) q += sprintf(q, " %s%4d %d", i == ptOther ? "* " : "", pidHandles[i].pid, pidHandles[i].used); dsyslog("%s", b); }
|
|
#define PRINTPIDS(s)
|
|
|
|
bool cDevice::HasPid(int Pid) const
|
|
{
|
|
for (int i = 0; i < MAXPIDHANDLES; i++) {
|
|
if (pidHandles[i].pid == Pid)
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
bool cDevice::AddPid(int Pid, ePidType PidType, int StreamType)
|
|
{
|
|
if (Pid || PidType == ptPcr) {
|
|
int n = -1;
|
|
int a = -1;
|
|
if (PidType != ptPcr) { // PPID always has to be explicit
|
|
for (int i = 0; i < MAXPIDHANDLES; i++) {
|
|
if (i != ptPcr) {
|
|
if (pidHandles[i].pid == Pid)
|
|
n = i;
|
|
else if (a < 0 && i >= ptOther && !pidHandles[i].used)
|
|
a = i;
|
|
}
|
|
}
|
|
}
|
|
if (n >= 0) {
|
|
// The Pid is already in use
|
|
if (++pidHandles[n].used == 2 && n <= ptTeletext) {
|
|
// It's a special PID that may have to be switched into "tap" mode
|
|
PRINTPIDS("A");
|
|
if (!SetPid(&pidHandles[n], n, true)) {
|
|
esyslog("ERROR: can't set PID %d on device %d", Pid, CardIndex() + 1);
|
|
if (PidType <= ptTeletext)
|
|
DetachAll(Pid);
|
|
DelPid(Pid, PidType);
|
|
return false;
|
|
}
|
|
if (camSlot)
|
|
camSlot->SetPid(Pid, true);
|
|
}
|
|
PRINTPIDS("a");
|
|
return true;
|
|
}
|
|
else if (PidType < ptOther) {
|
|
// The Pid is not yet in use and it is a special one
|
|
n = PidType;
|
|
}
|
|
else if (a >= 0) {
|
|
// The Pid is not yet in use and we have a free slot
|
|
n = a;
|
|
}
|
|
else {
|
|
esyslog("ERROR: no free slot for PID %d on device %d", Pid, CardIndex() + 1);
|
|
return false;
|
|
}
|
|
if (n >= 0) {
|
|
pidHandles[n].pid = Pid;
|
|
pidHandles[n].streamType = StreamType;
|
|
pidHandles[n].used = 1;
|
|
PRINTPIDS("C");
|
|
if (!SetPid(&pidHandles[n], n, true)) {
|
|
esyslog("ERROR: can't set PID %d on device %d", Pid, CardIndex() + 1);
|
|
if (PidType <= ptTeletext)
|
|
DetachAll(Pid);
|
|
DelPid(Pid, PidType);
|
|
return false;
|
|
}
|
|
if (camSlot)
|
|
camSlot->SetPid(Pid, true);
|
|
}
|
|
}
|
|
return true;
|
|
}
|
|
|
|
void cDevice::DelPid(int Pid, ePidType PidType)
|
|
{
|
|
if (Pid || PidType == ptPcr) {
|
|
int n = -1;
|
|
if (PidType == ptPcr)
|
|
n = PidType; // PPID always has to be explicit
|
|
else {
|
|
for (int i = 0; i < MAXPIDHANDLES; i++) {
|
|
if (pidHandles[i].pid == Pid) {
|
|
n = i;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
if (n >= 0 && pidHandles[n].used) {
|
|
PRINTPIDS("D");
|
|
if (--pidHandles[n].used < 2) {
|
|
SetPid(&pidHandles[n], n, false);
|
|
if (pidHandles[n].used == 0) {
|
|
pidHandles[n].handle = -1;
|
|
pidHandles[n].pid = 0;
|
|
if (camSlot)
|
|
camSlot->SetPid(Pid, false);
|
|
}
|
|
}
|
|
PRINTPIDS("E");
|
|
}
|
|
}
|
|
}
|
|
|
|
bool cDevice::SetPid(cPidHandle *Handle, int Type, bool On)
|
|
{
|
|
return false;
|
|
}
|
|
|
|
void cDevice::StartSectionHandler(void)
|
|
{
|
|
if (!sectionHandler) {
|
|
sectionHandler = new cSectionHandler(this);
|
|
AttachFilter(eitFilter = new cEitFilter);
|
|
AttachFilter(patFilter = new cPatFilter);
|
|
AttachFilter(sdtFilter = new cSdtFilter(patFilter));
|
|
AttachFilter(nitFilter = new cNitFilter);
|
|
}
|
|
}
|
|
|
|
void cDevice::StopSectionHandler(void)
|
|
{
|
|
if (sectionHandler) {
|
|
delete nitFilter;
|
|
delete sdtFilter;
|
|
delete patFilter;
|
|
delete eitFilter;
|
|
delete sectionHandler;
|
|
nitFilter = NULL;
|
|
sdtFilter = NULL;
|
|
patFilter = NULL;
|
|
eitFilter = NULL;
|
|
sectionHandler = NULL;
|
|
}
|
|
}
|
|
|
|
int cDevice::OpenFilter(u_short Pid, u_char Tid, u_char Mask)
|
|
{
|
|
return -1;
|
|
}
|
|
|
|
void cDevice::CloseFilter(int Handle)
|
|
{
|
|
close(Handle);
|
|
}
|
|
|
|
void cDevice::AttachFilter(cFilter *Filter)
|
|
{
|
|
if (sectionHandler)
|
|
sectionHandler->Attach(Filter);
|
|
}
|
|
|
|
void cDevice::Detach(cFilter *Filter)
|
|
{
|
|
if (sectionHandler)
|
|
sectionHandler->Detach(Filter);
|
|
}
|
|
|
|
bool cDevice::ProvidesSource(int Source) const
|
|
{
|
|
return false;
|
|
}
|
|
|
|
bool cDevice::DeviceHooksProvidesTransponder(const cChannel *Channel) const
|
|
{
|
|
cDeviceHook *Hook = deviceHooks.First();
|
|
while (Hook) {
|
|
if (!Hook->DeviceProvidesTransponder(this, Channel))
|
|
return false;
|
|
Hook = deviceHooks.Next(Hook);
|
|
}
|
|
return true;
|
|
}
|
|
|
|
bool cDevice::ProvidesTransponder(const cChannel *Channel) const
|
|
{
|
|
return false;
|
|
}
|
|
|
|
bool cDevice::ProvidesTransponderExclusively(const cChannel *Channel) const
|
|
{
|
|
for (int i = 0; i < numDevices; i++) {
|
|
if (device[i] && device[i] != this && device[i]->ProvidesTransponder(Channel))
|
|
return false;
|
|
}
|
|
return true;
|
|
}
|
|
|
|
bool cDevice::ProvidesChannel(const cChannel *Channel, int Priority, bool *NeedsDetachReceivers) const
|
|
{
|
|
return false;
|
|
}
|
|
|
|
bool cDevice::ProvidesEIT(void) const
|
|
{
|
|
return false;
|
|
}
|
|
|
|
int cDevice::NumProvidedSystems(void) const
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
int cDevice::SignalStrength(void) const
|
|
{
|
|
return -1;
|
|
}
|
|
|
|
int cDevice::SignalQuality(void) const
|
|
{
|
|
return -1;
|
|
}
|
|
|
|
const cChannel *cDevice::GetCurrentlyTunedTransponder(void) const
|
|
{
|
|
return NULL;
|
|
}
|
|
|
|
bool cDevice::IsTunedToTransponder(const cChannel *Channel) const
|
|
{
|
|
return false;
|
|
}
|
|
|
|
bool cDevice::MaySwitchTransponder(const cChannel *Channel) const
|
|
{
|
|
return time(NULL) > occupiedTimeout && !Receiving(true) && !(pidHandles[ptAudio].pid || pidHandles[ptVideo].pid || pidHandles[ptDolby].pid);
|
|
}
|
|
|
|
bool cDevice::SwitchChannel(const cChannel *Channel, bool LiveView)
|
|
{
|
|
if (LiveView) {
|
|
isyslog("switching to channel %d", Channel->Number());
|
|
cControl::Shutdown(); // prevents old channel from being shown too long if GetDevice() takes longer
|
|
}
|
|
for (int i = 3; i--;) {
|
|
switch (SetChannel(Channel, LiveView)) {
|
|
case scrOk: return true;
|
|
case scrNotAvailable: Skins.Message(mtInfo, tr("Channel not available!"));
|
|
return false;
|
|
case scrNoTransfer: Skins.Message(mtError, tr("Can't start Transfer Mode!"));
|
|
return false;
|
|
case scrFailed: break; // loop will retry
|
|
default: esyslog("ERROR: invalid return value from SetChannel");
|
|
}
|
|
esyslog("retrying");
|
|
}
|
|
return false;
|
|
}
|
|
|
|
bool cDevice::SwitchChannel(int Direction)
|
|
{
|
|
bool result = false;
|
|
Direction = sgn(Direction);
|
|
if (Direction) {
|
|
cControl::Shutdown(); // prevents old channel from being shown too long if GetDevice() takes longer
|
|
int n = CurrentChannel() + Direction;
|
|
int first = n;
|
|
cChannel *channel;
|
|
while ((channel = Channels.GetByNumber(n, Direction)) != NULL) {
|
|
// try only channels which are currently available
|
|
if (GetDevice(channel, 0, true))
|
|
break;
|
|
n = channel->Number() + Direction;
|
|
}
|
|
if (channel) {
|
|
int d = n - first;
|
|
if (abs(d) == 1)
|
|
dsyslog("skipped channel %d", first);
|
|
else if (d)
|
|
dsyslog("skipped channels %d..%d", first, n - sgn(d));
|
|
if (PrimaryDevice()->SwitchChannel(channel, true))
|
|
result = true;
|
|
}
|
|
else if (n != first)
|
|
Skins.Message(mtError, tr("Channel not available!"));
|
|
}
|
|
return result;
|
|
}
|
|
|
|
eSetChannelResult cDevice::SetChannel(const cChannel *Channel, bool LiveView)
|
|
{
|
|
if (LiveView) {
|
|
StopReplay();
|
|
DELETENULL(liveSubtitle);
|
|
DELETENULL(dvbSubtitleConverter);
|
|
}
|
|
|
|
cDevice *Device = (LiveView && IsPrimaryDevice()) ? GetDevice(Channel, 0, LiveView) : this;
|
|
|
|
bool NeedsTransferMode = Device != this;
|
|
|
|
eSetChannelResult Result = scrOk;
|
|
|
|
// If this DVB card can't receive this channel, let's see if we can
|
|
// use the card that actually can receive it and transfer data from there:
|
|
|
|
if (NeedsTransferMode) {
|
|
if (Device && CanReplay()) {
|
|
cStatus::MsgChannelSwitch(this, 0); // only report status if we are actually going to switch the channel
|
|
if (Device->SetChannel(Channel, false) == scrOk) // calling SetChannel() directly, not SwitchChannel()!
|
|
cControl::Launch(new cTransferControl(Device, Channel));
|
|
else
|
|
Result = scrNoTransfer;
|
|
}
|
|
else
|
|
Result = scrNotAvailable;
|
|
}
|
|
else {
|
|
Channels.Lock(false);
|
|
cStatus::MsgChannelSwitch(this, 0); // only report status if we are actually going to switch the channel
|
|
// Stop section handling:
|
|
if (sectionHandler) {
|
|
sectionHandler->SetStatus(false);
|
|
sectionHandler->SetChannel(NULL);
|
|
}
|
|
// Tell the camSlot about the channel switch and add all PIDs of this
|
|
// channel to it, for possible later decryption:
|
|
if (camSlot)
|
|
camSlot->AddChannel(Channel);
|
|
if (SetChannelDevice(Channel, LiveView)) {
|
|
// Start section handling:
|
|
if (sectionHandler) {
|
|
sectionHandler->SetChannel(Channel);
|
|
sectionHandler->SetStatus(true);
|
|
}
|
|
// Start decrypting any PIDs that might have been set in SetChannelDevice():
|
|
if (camSlot)
|
|
camSlot->StartDecrypting();
|
|
}
|
|
else
|
|
Result = scrFailed;
|
|
Channels.Unlock();
|
|
}
|
|
|
|
if (Result == scrOk) {
|
|
if (LiveView && IsPrimaryDevice()) {
|
|
currentChannel = Channel->Number();
|
|
// Set the available audio tracks:
|
|
ClrAvailableTracks();
|
|
for (int i = 0; i < MAXAPIDS; i++)
|
|
SetAvailableTrack(ttAudio, i, Channel->Apid(i), Channel->Alang(i));
|
|
if (Setup.UseDolbyDigital) {
|
|
for (int i = 0; i < MAXDPIDS; i++)
|
|
SetAvailableTrack(ttDolby, i, Channel->Dpid(i), Channel->Dlang(i));
|
|
}
|
|
for (int i = 0; i < MAXSPIDS; i++)
|
|
SetAvailableTrack(ttSubtitle, i, Channel->Spid(i), Channel->Slang(i));
|
|
if (!NeedsTransferMode)
|
|
EnsureAudioTrack(true);
|
|
EnsureSubtitleTrack();
|
|
}
|
|
cStatus::MsgChannelSwitch(this, Channel->Number()); // only report status if channel switch successfull
|
|
}
|
|
|
|
return Result;
|
|
}
|
|
|
|
void cDevice::ForceTransferMode(void)
|
|
{
|
|
if (!cTransferControl::ReceiverDevice()) {
|
|
cChannel *Channel = Channels.GetByNumber(CurrentChannel());
|
|
if (Channel)
|
|
SetChannelDevice(Channel, false); // this implicitly starts Transfer Mode
|
|
}
|
|
}
|
|
|
|
int cDevice::Occupied(void) const
|
|
{
|
|
int Seconds = occupiedTimeout - time(NULL);
|
|
return Seconds > 0 ? Seconds : 0;
|
|
}
|
|
|
|
void cDevice::SetOccupied(int Seconds)
|
|
{
|
|
if (Seconds >= 0)
|
|
occupiedTimeout = time(NULL) + min(Seconds, MAXOCCUPIEDTIMEOUT);
|
|
}
|
|
|
|
bool cDevice::SetChannelDevice(const cChannel *Channel, bool LiveView)
|
|
{
|
|
return false;
|
|
}
|
|
|
|
bool cDevice::HasLock(int TimeoutMs)
|
|
{
|
|
return true;
|
|
}
|
|
|
|
bool cDevice::HasProgramme(void)
|
|
{
|
|
return Replaying() || pidHandles[ptAudio].pid || pidHandles[ptVideo].pid;
|
|
}
|
|
|
|
int cDevice::GetAudioChannelDevice(void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
void cDevice::SetAudioChannelDevice(int AudioChannel)
|
|
{
|
|
}
|
|
|
|
void cDevice::SetVolumeDevice(int Volume)
|
|
{
|
|
}
|
|
|
|
void cDevice::SetDigitalAudioDevice(bool On)
|
|
{
|
|
}
|
|
|
|
void cDevice::SetAudioTrackDevice(eTrackType Type)
|
|
{
|
|
}
|
|
|
|
void cDevice::SetSubtitleTrackDevice(eTrackType Type)
|
|
{
|
|
}
|
|
|
|
bool cDevice::ToggleMute(void)
|
|
{
|
|
int OldVolume = volume;
|
|
mute = !mute;
|
|
//XXX why is it necessary to use different sequences???
|
|
if (mute) {
|
|
SetVolume(0, true);
|
|
Audios.MuteAudio(mute); // Mute external audio after analog audio
|
|
}
|
|
else {
|
|
Audios.MuteAudio(mute); // Enable external audio before analog audio
|
|
SetVolume(OldVolume, true);
|
|
}
|
|
volume = OldVolume;
|
|
return mute;
|
|
}
|
|
|
|
int cDevice::GetAudioChannel(void)
|
|
{
|
|
int c = GetAudioChannelDevice();
|
|
return (0 <= c && c <= 2) ? c : 0;
|
|
}
|
|
|
|
void cDevice::SetAudioChannel(int AudioChannel)
|
|
{
|
|
if (0 <= AudioChannel && AudioChannel <= 2)
|
|
SetAudioChannelDevice(AudioChannel);
|
|
}
|
|
|
|
void cDevice::SetVolume(int Volume, bool Absolute)
|
|
{
|
|
int OldVolume = volume;
|
|
volume = min(max(Absolute ? Volume : volume + Volume, 0), MAXVOLUME);
|
|
SetVolumeDevice(volume);
|
|
Absolute |= mute;
|
|
cStatus::MsgSetVolume(Absolute ? volume : volume - OldVolume, Absolute);
|
|
if (volume > 0) {
|
|
mute = false;
|
|
Audios.MuteAudio(mute);
|
|
}
|
|
}
|
|
|
|
void cDevice::ClrAvailableTracks(bool DescriptionsOnly, bool IdsOnly)
|
|
{
|
|
if (DescriptionsOnly) {
|
|
for (int i = ttNone; i < ttMaxTrackTypes; i++)
|
|
*availableTracks[i].description = 0;
|
|
}
|
|
else {
|
|
if (IdsOnly) {
|
|
for (int i = ttNone; i < ttMaxTrackTypes; i++)
|
|
availableTracks[i].id = 0;
|
|
}
|
|
else
|
|
memset(availableTracks, 0, sizeof(availableTracks));
|
|
pre_1_3_19_PrivateStream = 0;
|
|
SetAudioChannel(0); // fall back to stereo
|
|
currentAudioTrackMissingCount = 0;
|
|
currentAudioTrack = ttNone;
|
|
currentSubtitleTrack = ttNone;
|
|
}
|
|
}
|
|
|
|
bool cDevice::SetAvailableTrack(eTrackType Type, int Index, uint16_t Id, const char *Language, const char *Description)
|
|
{
|
|
eTrackType t = eTrackType(Type + Index);
|
|
if (Type == ttAudio && IS_AUDIO_TRACK(t) ||
|
|
Type == ttDolby && IS_DOLBY_TRACK(t) ||
|
|
Type == ttSubtitle && IS_SUBTITLE_TRACK(t)) {
|
|
if (Language)
|
|
strn0cpy(availableTracks[t].language, Language, sizeof(availableTracks[t].language));
|
|
if (Description)
|
|
Utf8Strn0Cpy(availableTracks[t].description, Description, sizeof(availableTracks[t].description));
|
|
if (Id) {
|
|
availableTracks[t].id = Id; // setting 'id' last to avoid the need for extensive locking
|
|
if (Type == ttAudio || Type == ttDolby) {
|
|
int numAudioTracks = NumAudioTracks();
|
|
if (!availableTracks[currentAudioTrack].id && numAudioTracks && currentAudioTrackMissingCount++ > numAudioTracks * 10)
|
|
EnsureAudioTrack();
|
|
else if (t == currentAudioTrack)
|
|
currentAudioTrackMissingCount = 0;
|
|
}
|
|
else if (Type == ttSubtitle && autoSelectPreferredSubtitleLanguage)
|
|
EnsureSubtitleTrack();
|
|
}
|
|
return true;
|
|
}
|
|
else
|
|
esyslog("ERROR: SetAvailableTrack called with invalid Type/Index (%d/%d)", Type, Index);
|
|
return false;
|
|
}
|
|
|
|
const tTrackId *cDevice::GetTrack(eTrackType Type)
|
|
{
|
|
return (ttNone < Type && Type < ttMaxTrackTypes) ? &availableTracks[Type] : NULL;
|
|
}
|
|
|
|
int cDevice::NumTracks(eTrackType FirstTrack, eTrackType LastTrack) const
|
|
{
|
|
int n = 0;
|
|
for (int i = FirstTrack; i <= LastTrack; i++) {
|
|
if (availableTracks[i].id)
|
|
n++;
|
|
}
|
|
return n;
|
|
}
|
|
|
|
int cDevice::NumAudioTracks(void) const
|
|
{
|
|
return NumTracks(ttAudioFirst, ttDolbyLast);
|
|
}
|
|
|
|
int cDevice::NumSubtitleTracks(void) const
|
|
{
|
|
return NumTracks(ttSubtitleFirst, ttSubtitleLast);
|
|
}
|
|
|
|
bool cDevice::SetCurrentAudioTrack(eTrackType Type)
|
|
{
|
|
if (ttNone < Type && Type <= ttDolbyLast) {
|
|
cMutexLock MutexLock(&mutexCurrentAudioTrack);
|
|
if (IS_DOLBY_TRACK(Type))
|
|
SetDigitalAudioDevice(true);
|
|
currentAudioTrack = Type;
|
|
if (player)
|
|
player->SetAudioTrack(currentAudioTrack, GetTrack(currentAudioTrack));
|
|
else
|
|
SetAudioTrackDevice(currentAudioTrack);
|
|
if (IS_AUDIO_TRACK(Type))
|
|
SetDigitalAudioDevice(false);
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
bool cDevice::SetCurrentSubtitleTrack(eTrackType Type, bool Manual)
|
|
{
|
|
if (Type == ttNone || IS_SUBTITLE_TRACK(Type)) {
|
|
currentSubtitleTrack = Type;
|
|
autoSelectPreferredSubtitleLanguage = !Manual;
|
|
if (dvbSubtitleConverter)
|
|
dvbSubtitleConverter->Reset();
|
|
if (Type == ttNone && dvbSubtitleConverter) {
|
|
cMutexLock MutexLock(&mutexCurrentSubtitleTrack);
|
|
DELETENULL(dvbSubtitleConverter);
|
|
}
|
|
DELETENULL(liveSubtitle);
|
|
if (player)
|
|
player->SetSubtitleTrack(currentSubtitleTrack, GetTrack(currentSubtitleTrack));
|
|
else
|
|
SetSubtitleTrackDevice(currentSubtitleTrack);
|
|
if (currentSubtitleTrack != ttNone && !Replaying() && !Transferring()) {
|
|
const tTrackId *TrackId = GetTrack(currentSubtitleTrack);
|
|
if (TrackId && TrackId->id) {
|
|
liveSubtitle = new cLiveSubtitle(TrackId->id);
|
|
AttachReceiver(liveSubtitle);
|
|
}
|
|
}
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
void cDevice::EnsureAudioTrack(bool Force)
|
|
{
|
|
if (Force || !availableTracks[currentAudioTrack].id) {
|
|
eTrackType PreferredTrack = ttAudioFirst;
|
|
int PreferredAudioChannel = 0;
|
|
int LanguagePreference = -1;
|
|
int StartCheck = Setup.CurrentDolby ? ttDolbyFirst : ttAudioFirst;
|
|
int EndCheck = ttDolbyLast;
|
|
for (int i = StartCheck; i <= EndCheck; i++) {
|
|
const tTrackId *TrackId = GetTrack(eTrackType(i));
|
|
int pos = 0;
|
|
if (TrackId && TrackId->id && I18nIsPreferredLanguage(Setup.AudioLanguages, TrackId->language, LanguagePreference, &pos)) {
|
|
PreferredTrack = eTrackType(i);
|
|
PreferredAudioChannel = pos;
|
|
}
|
|
if (Setup.CurrentDolby && i == ttDolbyLast) {
|
|
i = ttAudioFirst - 1;
|
|
EndCheck = ttAudioLast;
|
|
}
|
|
}
|
|
// Make sure we're set to an available audio track:
|
|
const tTrackId *Track = GetTrack(GetCurrentAudioTrack());
|
|
if (Force || !Track || !Track->id || PreferredTrack != GetCurrentAudioTrack()) {
|
|
if (!Force) // only log this for automatic changes
|
|
dsyslog("setting audio track to %d (%d)", PreferredTrack, PreferredAudioChannel);
|
|
SetCurrentAudioTrack(PreferredTrack);
|
|
SetAudioChannel(PreferredAudioChannel);
|
|
}
|
|
}
|
|
}
|
|
|
|
void cDevice::EnsureSubtitleTrack(void)
|
|
{
|
|
if (Setup.DisplaySubtitles) {
|
|
eTrackType PreferredTrack = ttNone;
|
|
int LanguagePreference = INT_MAX; // higher than the maximum possible value
|
|
for (int i = ttSubtitleFirst; i <= ttSubtitleLast; i++) {
|
|
const tTrackId *TrackId = GetTrack(eTrackType(i));
|
|
if (TrackId && TrackId->id && I18nIsPreferredLanguage(Setup.SubtitleLanguages, TrackId->language, LanguagePreference))
|
|
PreferredTrack = eTrackType(i);
|
|
}
|
|
// Make sure we're set to an available subtitle track:
|
|
const tTrackId *Track = GetTrack(GetCurrentSubtitleTrack());
|
|
if (!Track || !Track->id || PreferredTrack != GetCurrentSubtitleTrack())
|
|
SetCurrentSubtitleTrack(PreferredTrack);
|
|
}
|
|
else
|
|
SetCurrentSubtitleTrack(ttNone);
|
|
}
|
|
|
|
bool cDevice::CanReplay(void) const
|
|
{
|
|
return HasDecoder();
|
|
}
|
|
|
|
bool cDevice::SetPlayMode(ePlayMode PlayMode)
|
|
{
|
|
return false;
|
|
}
|
|
|
|
int64_t cDevice::GetSTC(void)
|
|
{
|
|
return -1;
|
|
}
|
|
|
|
void cDevice::TrickSpeed(int Speed)
|
|
{
|
|
}
|
|
|
|
void cDevice::Clear(void)
|
|
{
|
|
Audios.ClearAudio();
|
|
if (dvbSubtitleConverter)
|
|
dvbSubtitleConverter->Reset();
|
|
}
|
|
|
|
void cDevice::Play(void)
|
|
{
|
|
Audios.MuteAudio(mute);
|
|
if (dvbSubtitleConverter)
|
|
dvbSubtitleConverter->Freeze(false);
|
|
}
|
|
|
|
void cDevice::Freeze(void)
|
|
{
|
|
Audios.MuteAudio(true);
|
|
if (dvbSubtitleConverter)
|
|
dvbSubtitleConverter->Freeze(true);
|
|
}
|
|
|
|
void cDevice::Mute(void)
|
|
{
|
|
Audios.MuteAudio(true);
|
|
}
|
|
|
|
void cDevice::StillPicture(const uchar *Data, int Length)
|
|
{
|
|
if (Data[0] == 0x47) {
|
|
// TS data
|
|
cTsToPes TsToPes;
|
|
uchar *buf = NULL;
|
|
int Size = 0;
|
|
while (Length >= TS_SIZE) {
|
|
int Pid = TsPid(Data);
|
|
if (Pid == 0)
|
|
patPmtParser.ParsePat(Data, TS_SIZE);
|
|
else if (Pid == patPmtParser.PmtPid())
|
|
patPmtParser.ParsePmt(Data, TS_SIZE);
|
|
else if (Pid == patPmtParser.Vpid()) {
|
|
if (TsPayloadStart(Data)) {
|
|
int l;
|
|
while (const uchar *p = TsToPes.GetPes(l)) {
|
|
int Offset = Size;
|
|
int NewSize = Size + l;
|
|
if (uchar *NewBuffer = (uchar *)realloc(buf, NewSize)) {
|
|
Size = NewSize;
|
|
buf = NewBuffer;
|
|
memcpy(buf + Offset, p, l);
|
|
}
|
|
else {
|
|
LOG_ERROR_STR("out of memory");
|
|
free(buf);
|
|
return;
|
|
}
|
|
}
|
|
TsToPes.Reset();
|
|
}
|
|
TsToPes.PutTs(Data, TS_SIZE);
|
|
}
|
|
Length -= TS_SIZE;
|
|
Data += TS_SIZE;
|
|
}
|
|
int l;
|
|
while (const uchar *p = TsToPes.GetPes(l)) {
|
|
int Offset = Size;
|
|
int NewSize = Size + l;
|
|
if (uchar *NewBuffer = (uchar *)realloc(buf, NewSize)) {
|
|
Size = NewSize;
|
|
buf = NewBuffer;
|
|
memcpy(buf + Offset, p, l);
|
|
}
|
|
else {
|
|
esyslog("ERROR: out of memory");
|
|
free(buf);
|
|
return;
|
|
}
|
|
}
|
|
StillPicture(buf, Size);
|
|
free(buf);
|
|
}
|
|
}
|
|
|
|
bool cDevice::Replaying(void) const
|
|
{
|
|
return player != NULL;
|
|
}
|
|
|
|
bool cDevice::Transferring(void) const
|
|
{
|
|
return ActualDevice() != PrimaryDevice();
|
|
}
|
|
|
|
bool cDevice::AttachPlayer(cPlayer *Player)
|
|
{
|
|
if (CanReplay()) {
|
|
if (player)
|
|
Detach(player);
|
|
DELETENULL(liveSubtitle);
|
|
DELETENULL(dvbSubtitleConverter);
|
|
patPmtParser.Reset();
|
|
player = Player;
|
|
if (!Transferring())
|
|
ClrAvailableTracks(false, true);
|
|
SetPlayMode(player->playMode);
|
|
player->device = this;
|
|
player->Activate(true);
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
void cDevice::Detach(cPlayer *Player)
|
|
{
|
|
if (Player && player == Player) {
|
|
cPlayer *p = player;
|
|
player = NULL; // avoids recursive calls to Detach()
|
|
p->Activate(false);
|
|
p->device = NULL;
|
|
cMutexLock MutexLock(&mutexCurrentSubtitleTrack);
|
|
delete dvbSubtitleConverter;
|
|
dvbSubtitleConverter = NULL;
|
|
SetPlayMode(pmNone);
|
|
SetVideoDisplayFormat(eVideoDisplayFormat(Setup.VideoDisplayFormat));
|
|
PlayTs(NULL, 0);
|
|
patPmtParser.Reset();
|
|
Audios.ClearAudio();
|
|
isPlayingVideo = false;
|
|
}
|
|
}
|
|
|
|
void cDevice::StopReplay(void)
|
|
{
|
|
if (player) {
|
|
Detach(player);
|
|
if (IsPrimaryDevice())
|
|
cControl::Shutdown();
|
|
}
|
|
}
|
|
|
|
bool cDevice::Poll(cPoller &Poller, int TimeoutMs)
|
|
{
|
|
return false;
|
|
}
|
|
|
|
bool cDevice::Flush(int TimeoutMs)
|
|
{
|
|
return true;
|
|
}
|
|
|
|
int cDevice::PlayVideo(const uchar *Data, int Length)
|
|
{
|
|
return -1;
|
|
}
|
|
|
|
int cDevice::PlayAudio(const uchar *Data, int Length, uchar Id)
|
|
{
|
|
return -1;
|
|
}
|
|
|
|
int cDevice::PlaySubtitle(const uchar *Data, int Length)
|
|
{
|
|
if (!dvbSubtitleConverter)
|
|
dvbSubtitleConverter = new cDvbSubtitleConverter;
|
|
return dvbSubtitleConverter->ConvertFragments(Data, Length);
|
|
}
|
|
|
|
int cDevice::PlayPesPacket(const uchar *Data, int Length, bool VideoOnly)
|
|
{
|
|
cMutexLock MutexLock(&mutexCurrentAudioTrack);
|
|
bool FirstLoop = true;
|
|
uchar c = Data[3];
|
|
const uchar *Start = Data;
|
|
const uchar *End = Start + Length;
|
|
while (Start < End) {
|
|
int d = End - Start;
|
|
int w = d;
|
|
switch (c) {
|
|
case 0xBE: // padding stream, needed for MPEG1
|
|
case 0xE0 ... 0xEF: // video
|
|
isPlayingVideo = true;
|
|
w = PlayVideo(Start, d);
|
|
break;
|
|
case 0xC0 ... 0xDF: // audio
|
|
SetAvailableTrack(ttAudio, c - 0xC0, c);
|
|
if ((!VideoOnly || HasIBPTrickSpeed()) && c == availableTracks[currentAudioTrack].id) {
|
|
w = PlayAudio(Start, d, c);
|
|
if (FirstLoop)
|
|
Audios.PlayAudio(Data, Length, c);
|
|
}
|
|
break;
|
|
case 0xBD: { // private stream 1
|
|
int PayloadOffset = Data[8] + 9;
|
|
|
|
// Compatibility mode for old subtitles plugin:
|
|
if ((Data[7] & 0x01) && (Data[PayloadOffset - 3] & 0x81) == 0x01 && Data[PayloadOffset - 2] == 0x81)
|
|
PayloadOffset--;
|
|
|
|
uchar SubStreamId = Data[PayloadOffset];
|
|
uchar SubStreamType = SubStreamId & 0xF0;
|
|
uchar SubStreamIndex = SubStreamId & 0x1F;
|
|
|
|
// Compatibility mode for old VDR recordings, where 0xBD was only AC3:
|
|
pre_1_3_19_PrivateStreamDetected:
|
|
if (pre_1_3_19_PrivateStream > MIN_PRE_1_3_19_PRIVATESTREAM) {
|
|
SubStreamId = c;
|
|
SubStreamType = 0x80;
|
|
SubStreamIndex = 0;
|
|
}
|
|
else if (pre_1_3_19_PrivateStream)
|
|
pre_1_3_19_PrivateStream--; // every known PS1 packet counts down towards 0 to recover from glitches...
|
|
switch (SubStreamType) {
|
|
case 0x20: // SPU
|
|
case 0x30: // SPU
|
|
SetAvailableTrack(ttSubtitle, SubStreamIndex, SubStreamId);
|
|
if ((!VideoOnly || HasIBPTrickSpeed()) && currentSubtitleTrack != ttNone && SubStreamId == availableTracks[currentSubtitleTrack].id)
|
|
w = PlaySubtitle(Start, d);
|
|
break;
|
|
case 0x80: // AC3 & DTS
|
|
if (Setup.UseDolbyDigital) {
|
|
SetAvailableTrack(ttDolby, SubStreamIndex, SubStreamId);
|
|
if ((!VideoOnly || HasIBPTrickSpeed()) && SubStreamId == availableTracks[currentAudioTrack].id) {
|
|
w = PlayAudio(Start, d, SubStreamId);
|
|
if (FirstLoop)
|
|
Audios.PlayAudio(Data, Length, SubStreamId);
|
|
}
|
|
}
|
|
break;
|
|
case 0xA0: // LPCM
|
|
SetAvailableTrack(ttAudio, SubStreamIndex, SubStreamId);
|
|
if ((!VideoOnly || HasIBPTrickSpeed()) && SubStreamId == availableTracks[currentAudioTrack].id) {
|
|
w = PlayAudio(Start, d, SubStreamId);
|
|
if (FirstLoop)
|
|
Audios.PlayAudio(Data, Length, SubStreamId);
|
|
}
|
|
break;
|
|
default:
|
|
// Compatibility mode for old VDR recordings, where 0xBD was only AC3:
|
|
if (pre_1_3_19_PrivateStream <= MIN_PRE_1_3_19_PRIVATESTREAM) {
|
|
dsyslog("unknown PS1 packet, substream id = %02X (counter is at %d)", SubStreamId, pre_1_3_19_PrivateStream);
|
|
pre_1_3_19_PrivateStream += 2; // ...and every unknown PS1 packet counts up (the very first one counts twice, but that's ok)
|
|
if (pre_1_3_19_PrivateStream > MIN_PRE_1_3_19_PRIVATESTREAM) {
|
|
dsyslog("switching to pre 1.3.19 Dolby Digital compatibility mode - substream id = %02X", SubStreamId);
|
|
ClrAvailableTracks();
|
|
pre_1_3_19_PrivateStream = MIN_PRE_1_3_19_PRIVATESTREAM + 1;
|
|
goto pre_1_3_19_PrivateStreamDetected;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
break;
|
|
default:
|
|
;//esyslog("ERROR: unexpected packet id %02X", c);
|
|
}
|
|
if (w > 0)
|
|
Start += w;
|
|
else {
|
|
if (Start != Data)
|
|
esyslog("ERROR: incomplete PES packet write!");
|
|
return Start == Data ? w : Start - Data;
|
|
}
|
|
FirstLoop = false;
|
|
}
|
|
return Length;
|
|
}
|
|
|
|
int cDevice::PlayPes(const uchar *Data, int Length, bool VideoOnly)
|
|
{
|
|
if (!Data) {
|
|
if (dvbSubtitleConverter)
|
|
dvbSubtitleConverter->Reset();
|
|
return 0;
|
|
}
|
|
int i = 0;
|
|
while (i <= Length - 6) {
|
|
if (Data[i] == 0x00 && Data[i + 1] == 0x00 && Data[i + 2] == 0x01) {
|
|
int l = PesLength(Data + i);
|
|
if (i + l > Length) {
|
|
esyslog("ERROR: incomplete PES packet!");
|
|
return Length;
|
|
}
|
|
int w = PlayPesPacket(Data + i, l, VideoOnly);
|
|
if (w > 0)
|
|
i += l;
|
|
else
|
|
return i == 0 ? w : i;
|
|
}
|
|
else
|
|
i++;
|
|
}
|
|
if (i < Length)
|
|
esyslog("ERROR: leftover PES data!");
|
|
return Length;
|
|
}
|
|
|
|
int cDevice::PlayTsVideo(const uchar *Data, int Length)
|
|
{
|
|
// Video PES has no explicit length, so we can only determine the end of
|
|
// a PES packet when the next TS packet that starts a payload comes in:
|
|
if (TsPayloadStart(Data)) {
|
|
int l;
|
|
while (const uchar *p = tsToPesVideo.GetPes(l)) {
|
|
int w = PlayVideo(p, l);
|
|
if (w <= 0) {
|
|
tsToPesVideo.SetRepeatLast();
|
|
return w;
|
|
}
|
|
}
|
|
tsToPesVideo.Reset();
|
|
}
|
|
tsToPesVideo.PutTs(Data, Length);
|
|
return Length;
|
|
}
|
|
|
|
int cDevice::PlayTsAudio(const uchar *Data, int Length)
|
|
{
|
|
// Audio PES always has an explicit length and consists of single packets:
|
|
int l;
|
|
if (const uchar *p = tsToPesAudio.GetPes(l)) {
|
|
int w = PlayAudio(p, l, p[3]);
|
|
if (w <= 0) {
|
|
tsToPesAudio.SetRepeatLast();
|
|
return w;
|
|
}
|
|
tsToPesAudio.Reset();
|
|
}
|
|
tsToPesAudio.PutTs(Data, Length);
|
|
return Length;
|
|
}
|
|
|
|
int cDevice::PlayTsSubtitle(const uchar *Data, int Length)
|
|
{
|
|
if (!dvbSubtitleConverter)
|
|
dvbSubtitleConverter = new cDvbSubtitleConverter;
|
|
tsToPesSubtitle.PutTs(Data, Length);
|
|
int l;
|
|
if (const uchar *p = tsToPesSubtitle.GetPes(l)) {
|
|
dvbSubtitleConverter->Convert(p, l);
|
|
tsToPesSubtitle.Reset();
|
|
}
|
|
return Length;
|
|
}
|
|
|
|
//TODO detect and report continuity errors?
|
|
int cDevice::PlayTs(const uchar *Data, int Length, bool VideoOnly)
|
|
{
|
|
int Played = 0;
|
|
if (Data == NULL) {
|
|
tsToPesVideo.Reset();
|
|
tsToPesAudio.Reset();
|
|
tsToPesSubtitle.Reset();
|
|
}
|
|
else if (Length < TS_SIZE) {
|
|
esyslog("ERROR: skipped %d bytes of TS fragment", Length);
|
|
return Length;
|
|
}
|
|
else {
|
|
cMutexLock MutexLock(&mutexCurrentAudioTrack);
|
|
while (Length >= TS_SIZE) {
|
|
if (Data[0] != TS_SYNC_BYTE) {
|
|
int Skipped = 1;
|
|
while (Skipped < Length && (Data[Skipped] != TS_SYNC_BYTE || Length - Skipped > TS_SIZE && Data[Skipped + TS_SIZE] != TS_SYNC_BYTE))
|
|
Skipped++;
|
|
esyslog("ERROR: skipped %d bytes to sync on start of TS packet", Skipped);
|
|
return Played + Skipped;
|
|
}
|
|
int Pid = TsPid(Data);
|
|
if (TsHasPayload(Data)) { // silently ignore TS packets w/o payload
|
|
int PayloadOffset = TsPayloadOffset(Data);
|
|
if (PayloadOffset < TS_SIZE) {
|
|
if (Pid == 0)
|
|
patPmtParser.ParsePat(Data, TS_SIZE);
|
|
else if (Pid == patPmtParser.PmtPid())
|
|
patPmtParser.ParsePmt(Data, TS_SIZE);
|
|
else if (Pid == patPmtParser.Vpid()) {
|
|
isPlayingVideo = true;
|
|
int w = PlayTsVideo(Data, TS_SIZE);
|
|
if (w < 0)
|
|
return Played ? Played : w;
|
|
if (w == 0)
|
|
break;
|
|
}
|
|
else if (Pid == availableTracks[currentAudioTrack].id) {
|
|
if (!VideoOnly || HasIBPTrickSpeed()) {
|
|
int w = PlayTsAudio(Data, TS_SIZE);
|
|
if (w < 0)
|
|
return Played ? Played : w;
|
|
if (w == 0)
|
|
break;
|
|
Audios.PlayTsAudio(Data, TS_SIZE);
|
|
}
|
|
}
|
|
else if (Pid == availableTracks[currentSubtitleTrack].id) {
|
|
if (!VideoOnly || HasIBPTrickSpeed())
|
|
PlayTsSubtitle(Data, TS_SIZE);
|
|
}
|
|
}
|
|
}
|
|
else if (Pid == patPmtParser.Ppid()) {
|
|
int w = PlayTsVideo(Data, TS_SIZE);
|
|
if (w < 0)
|
|
return Played ? Played : w;
|
|
if (w == 0)
|
|
break;
|
|
}
|
|
Played += TS_SIZE;
|
|
Length -= TS_SIZE;
|
|
Data += TS_SIZE;
|
|
}
|
|
}
|
|
return Played;
|
|
}
|
|
|
|
int cDevice::Priority(void) const
|
|
{
|
|
int priority = IsPrimaryDevice() ? Setup.PrimaryLimit - 1 : DEFAULTPRIORITY;
|
|
cMutexLock MutexLock(&mutexReceiver);
|
|
for (int i = 0; i < MAXRECEIVERS; i++) {
|
|
if (receiver[i])
|
|
priority = max(receiver[i]->priority, priority);
|
|
}
|
|
return priority;
|
|
}
|
|
|
|
bool cDevice::Ready(void)
|
|
{
|
|
return true;
|
|
}
|
|
|
|
bool cDevice::Receiving(bool CheckAny) const
|
|
{
|
|
cMutexLock MutexLock(&mutexReceiver);
|
|
for (int i = 0; i < MAXRECEIVERS; i++) {
|
|
if (receiver[i] && (CheckAny || receiver[i]->priority >= 0)) // cReceiver with priority < 0 doesn't count
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
#define TS_SCRAMBLING_TIMEOUT 3 // seconds to wait until a TS becomes unscrambled
|
|
#define TS_SCRAMBLING_TIME_OK 10 // seconds before a Channel/CAM combination is marked as known to decrypt
|
|
|
|
void cDevice::Action(void)
|
|
{
|
|
if (Running() && OpenDvr()) {
|
|
while (Running()) {
|
|
// Read data from the DVR device:
|
|
uchar *b = NULL;
|
|
if (GetTSPacket(b)) {
|
|
if (b) {
|
|
int Pid = TsPid(b);
|
|
// Check whether the TS packets are scrambled:
|
|
bool DetachReceivers = false;
|
|
bool DescramblingOk = false;
|
|
int CamSlotNumber = 0;
|
|
if (startScrambleDetection) {
|
|
cCamSlot *cs = CamSlot();
|
|
CamSlotNumber = cs ? cs->SlotNumber() : 0;
|
|
if (CamSlotNumber) {
|
|
bool Scrambled = b[3] & TS_SCRAMBLING_CONTROL;
|
|
int t = time(NULL) - startScrambleDetection;
|
|
if (Scrambled) {
|
|
if (t > TS_SCRAMBLING_TIMEOUT)
|
|
DetachReceivers = true;
|
|
}
|
|
else if (t > TS_SCRAMBLING_TIME_OK) {
|
|
DescramblingOk = true;
|
|
startScrambleDetection = 0;
|
|
}
|
|
}
|
|
}
|
|
// Distribute the packet to all attached receivers:
|
|
Lock();
|
|
for (int i = 0; i < MAXRECEIVERS; i++) {
|
|
if (receiver[i] && receiver[i]->WantsPid(Pid)) {
|
|
if (DetachReceivers) {
|
|
ChannelCamRelations.SetChecked(receiver[i]->ChannelID(), CamSlotNumber);
|
|
Detach(receiver[i]);
|
|
}
|
|
else
|
|
receiver[i]->Receive(b, TS_SIZE);
|
|
if (DescramblingOk)
|
|
ChannelCamRelations.SetDecrypt(receiver[i]->ChannelID(), CamSlotNumber);
|
|
}
|
|
}
|
|
Unlock();
|
|
}
|
|
}
|
|
else
|
|
break;
|
|
}
|
|
CloseDvr();
|
|
}
|
|
}
|
|
|
|
bool cDevice::OpenDvr(void)
|
|
{
|
|
return false;
|
|
}
|
|
|
|
void cDevice::CloseDvr(void)
|
|
{
|
|
}
|
|
|
|
bool cDevice::GetTSPacket(uchar *&Data)
|
|
{
|
|
return false;
|
|
}
|
|
|
|
bool cDevice::AttachReceiver(cReceiver *Receiver)
|
|
{
|
|
if (!Receiver)
|
|
return false;
|
|
if (Receiver->device == this)
|
|
return true;
|
|
// activate the following line if you need it - actually the driver should be fixed!
|
|
//#define WAIT_FOR_TUNER_LOCK
|
|
#ifdef WAIT_FOR_TUNER_LOCK
|
|
#define TUNER_LOCK_TIMEOUT 5000 // ms
|
|
if (!HasLock(TUNER_LOCK_TIMEOUT)) {
|
|
esyslog("ERROR: device %d has no lock, can't attach receiver!", CardIndex() + 1);
|
|
return false;
|
|
}
|
|
#endif
|
|
cMutexLock MutexLock(&mutexReceiver);
|
|
for (int i = 0; i < MAXRECEIVERS; i++) {
|
|
if (!receiver[i]) {
|
|
for (int n = 0; n < Receiver->numPids; n++) {
|
|
if (!AddPid(Receiver->pids[n])) {
|
|
for ( ; n-- > 0; )
|
|
DelPid(Receiver->pids[n]);
|
|
return false;
|
|
}
|
|
}
|
|
Receiver->Activate(true);
|
|
Lock();
|
|
Receiver->device = this;
|
|
receiver[i] = Receiver;
|
|
Unlock();
|
|
if (camSlot) {
|
|
camSlot->StartDecrypting();
|
|
startScrambleDetection = time(NULL);
|
|
}
|
|
Start();
|
|
return true;
|
|
}
|
|
}
|
|
esyslog("ERROR: no free receiver slot!");
|
|
return false;
|
|
}
|
|
|
|
void cDevice::Detach(cReceiver *Receiver)
|
|
{
|
|
if (!Receiver || Receiver->device != this)
|
|
return;
|
|
bool receiversLeft = false;
|
|
cMutexLock MutexLock(&mutexReceiver);
|
|
for (int i = 0; i < MAXRECEIVERS; i++) {
|
|
if (receiver[i] == Receiver) {
|
|
Receiver->Activate(false);
|
|
Lock();
|
|
receiver[i] = NULL;
|
|
Receiver->device = NULL;
|
|
Unlock();
|
|
for (int n = 0; n < Receiver->numPids; n++)
|
|
DelPid(Receiver->pids[n]);
|
|
}
|
|
else if (receiver[i])
|
|
receiversLeft = true;
|
|
}
|
|
if (camSlot)
|
|
camSlot->StartDecrypting();
|
|
if (!receiversLeft)
|
|
Cancel(-1);
|
|
}
|
|
|
|
void cDevice::DetachAll(int Pid)
|
|
{
|
|
if (Pid) {
|
|
cMutexLock MutexLock(&mutexReceiver);
|
|
for (int i = 0; i < MAXRECEIVERS; i++) {
|
|
cReceiver *Receiver = receiver[i];
|
|
if (Receiver && Receiver->WantsPid(Pid))
|
|
Detach(Receiver);
|
|
}
|
|
}
|
|
}
|
|
|
|
void cDevice::DetachAllReceivers(void)
|
|
{
|
|
cMutexLock MutexLock(&mutexReceiver);
|
|
for (int i = 0; i < MAXRECEIVERS; i++)
|
|
Detach(receiver[i]);
|
|
}
|
|
|
|
// --- cTSBuffer -------------------------------------------------------------
|
|
|
|
cTSBuffer::cTSBuffer(int File, int Size, int CardIndex)
|
|
{
|
|
SetDescription("TS buffer on device %d", CardIndex);
|
|
f = File;
|
|
cardIndex = CardIndex;
|
|
delivered = false;
|
|
ringBuffer = new cRingBufferLinear(Size, TS_SIZE, true, "TS");
|
|
ringBuffer->SetTimeouts(100, 100);
|
|
Start();
|
|
}
|
|
|
|
cTSBuffer::~cTSBuffer()
|
|
{
|
|
Cancel(3);
|
|
delete ringBuffer;
|
|
}
|
|
|
|
void cTSBuffer::Action(void)
|
|
{
|
|
if (ringBuffer) {
|
|
bool firstRead = true;
|
|
cPoller Poller(f);
|
|
while (Running()) {
|
|
if (firstRead || Poller.Poll(100)) {
|
|
firstRead = false;
|
|
int r = ringBuffer->Read(f);
|
|
if (r < 0 && FATALERRNO) {
|
|
if (errno == EOVERFLOW)
|
|
esyslog("ERROR: driver buffer overflow on device %d", cardIndex);
|
|
else {
|
|
LOG_ERROR;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
uchar *cTSBuffer::Get(void)
|
|
{
|
|
int Count = 0;
|
|
if (delivered) {
|
|
ringBuffer->Del(TS_SIZE);
|
|
delivered = false;
|
|
}
|
|
uchar *p = ringBuffer->Get(Count);
|
|
if (p && Count >= TS_SIZE) {
|
|
if (*p != TS_SYNC_BYTE) {
|
|
for (int i = 1; i < Count; i++) {
|
|
if (p[i] == TS_SYNC_BYTE) {
|
|
Count = i;
|
|
break;
|
|
}
|
|
}
|
|
ringBuffer->Del(Count);
|
|
esyslog("ERROR: skipped %d bytes to sync on TS packet on device %d", Count, cardIndex);
|
|
return NULL;
|
|
}
|
|
delivered = true;
|
|
return p;
|
|
}
|
|
return NULL;
|
|
}
|