vdr/recording.h
Klaus Schmidinger 5a28d99936 Version 1.7.22
Original announce message:
VDR developer version 1.7.22 is now available at

       ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.22.tar.bz2

A 'diff' against the previous version is available at

       ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.21-1.7.22.diff

MD5 checksums:

b9c0fe1aac8e653c0d0234bc72c2bb2c  vdr-1.7.22.tar.bz2
868bb332342c9a78beda17cc85e0bb93  vdr-1.7.21-1.7.22.diff

WARNING:
========

This is a developer version. Even though I use it in my productive
environment. I strongly recommend that you only use it under controlled
conditions and for testing and debugging.

From the HISTORY file:
- Fixed scaling subtitles in case the primary device's GetVideoSize() function doesn't
  return actual values (thanks to Luca Olivetti).
- The DiSEqC codes are now copied in the call to cDiseqc::Execute().
- VDR now supports "Satellite Channel Routing" (SCR) according to EN50494 (based on
  the "unicable" patch from Lars Hanisch).
  Since "Unicable" is a registered trademark and stands for only one of many
  implementations of SCR, the following changes have been made compared to the patch,
  which need to be taken into account by people who have set up their system using
  the patch:
  - The 'U' parameter in the diseqc.conf file has been changed to 'S' ("Scr").
  - The configuration file name has been changed from "unicable.conf" to "scr.conf".
- Updated sources.conf (thanks to Arthur Konovalov).
- The SVDRP command LSTC now also accepts channel IDs (thanks to Dominic Evans).
- Fixed handling DVB subtitles and implemented decoding textual DVB subtitles (thanks
  to Rolf Ahrenberg).
- Added cap_net_raw to the capabilities that are not dropped (thanks to Dominic Evans).
- Fixed setting the start time of an edited recording (thanks to Christoph Haubrich).
- Temporarily switching free devices to transponders in order to have their running
  status updated is now done by marking the devices as "occupied" for a certain
  amount of time.
- The new setup options "LNB/Device n connected to sat cable" can be used to define
  which DVB-S devices are connected to the same sat cable and are therefore "bonded".
  This obsoletes the LNBSHARE patch. Users of the LNBSHARE patch will need to newly
  set up their sat devices with the above options.
- Fixed a crash when deleting a recording while cutting it (thanks to Ville Skyttä).
- Fixed several spelling errors (thanks to Ville Skyttä).
- The new SVDRP command UPDR can be used to trigger an update of the list of
  recordings (thanks to Lars Hanisch).
- Added generating a pkg-config file to the Makefile (thanks to Ville Skyttä).
- Removed the '.pl' suffix from all scripts (thanks to Ville Skyttä).
- Changed the default location for the LIRC socket to /var/run/lirc/lircd (thanks
  to Ville Skyttä).
- Added file name and line number to LOG_ERROR_STR() (thanks to Rolf Ahrenberg).
- Replaced all calls to sleep() with cCondWait::SleepMs() (thanks to Rolf Ahrenberg).
- Fixed a crash with malformed SI data (patch from vdr-portal).
2011-12-05 20:36:02 +01:00

337 lines
12 KiB
C++

/*
* recording.h: Recording file handling
*
* See the main source file 'vdr.c' for copyright information and
* how to reach the author.
*
* $Id: recording.h 2.26 2011/12/04 13:38:17 kls Exp $
*/
#ifndef __RECORDING_H
#define __RECORDING_H
#include <time.h>
#include "channels.h"
#include "config.h"
#include "epg.h"
#include "thread.h"
#include "timers.h"
#include "tools.h"
#define FOLDERDELIMCHAR '~'
#define TIMERMACRO_TITLE "TITLE"
#define TIMERMACRO_EPISODE "EPISODE"
#define __RECORDING_H_DEPRECATED_DIRECT_MEMBER_ACCESS // Code enclosed with this macro is deprecated and may be removed in a future version
extern bool VfatFileSystem;
extern int InstanceId;
void RemoveDeletedRecordings(void);
void AssertFreeDiskSpace(int Priority = 0, bool Force = false);
///< The special Priority value -1 means that we shall get rid of any
///< deleted recordings faster than normal (because we're cutting).
///< If Force is true, the check will be done even if the timeout
///< hasn't expired yet.
class cResumeFile {
private:
char *fileName;
bool isPesRecording;
public:
cResumeFile(const char *FileName, bool IsPesRecording);
~cResumeFile();
int Read(void);
bool Save(int Index);
void Delete(void);
};
class cRecordingInfo {
friend class cRecording;
private:
tChannelID channelID;
char *channelName;
const cEvent *event;
cEvent *ownEvent;
char *aux;
double framesPerSecond;
int priority;
int lifetime;
char *fileName;
cRecordingInfo(const cChannel *Channel = NULL, const cEvent *Event = NULL);
bool Read(FILE *f);
void SetData(const char *Title, const char *ShortText, const char *Description);
void SetAux(const char *Aux);
public:
cRecordingInfo(const char *FileName);
~cRecordingInfo();
tChannelID ChannelID(void) const { return channelID; }
const char *ChannelName(void) const { return channelName; }
const cEvent *GetEvent(void) const { return event; }
const char *Title(void) const { return event->Title(); }
const char *ShortText(void) const { return event->ShortText(); }
const char *Description(void) const { return event->Description(); }
const cComponents *Components(void) const { return event->Components(); }
const char *Aux(void) const { return aux; }
double FramesPerSecond(void) const { return framesPerSecond; }
void SetFramesPerSecond(double FramesPerSecond);
bool Write(FILE *f, const char *Prefix = "") const;
bool Read(void);
bool Write(void) const;
};
class cRecording : public cListObject {
friend class cRecordings;
private:
mutable int resume;
mutable char *titleBuffer;
mutable char *sortBuffer;
mutable char *fileName;
mutable char *name;
mutable int fileSizeMB;
mutable int numFrames;
int channel;
int instanceId;
bool isPesRecording;
double framesPerSecond;
cRecordingInfo *info;
cRecording(const cRecording&); // can't copy cRecording
cRecording &operator=(const cRecording &); // can't assign cRecording
static char *StripEpisodeName(char *s);
char *SortName(void) const;
int GetResume(void) const;
#ifdef __RECORDING_H_DEPRECATED_DIRECT_MEMBER_ACCESS
public:
#endif
time_t start;
int priority;
int lifetime;
time_t deleted;
public:
cRecording(cTimer *Timer, const cEvent *Event);
cRecording(const char *FileName);
virtual ~cRecording();
time_t Start(void) const { return start; }
int Priority(void) const { return priority; }
int Lifetime(void) const { return lifetime; }
time_t Deleted(void) const { return deleted; }
virtual int Compare(const cListObject &ListObject) const;
const char *Name(void) const { return name; }
const char *FileName(void) const;
const char *Title(char Delimiter = ' ', bool NewIndicator = false, int Level = -1) const;
const cRecordingInfo *Info(void) const { return info; }
const char *PrefixFileName(char Prefix);
int HierarchyLevels(void) const;
void ResetResume(void) const;
double FramesPerSecond(void) const { return framesPerSecond; }
int NumFrames(void) const;
///< Returns the number of frames in this recording.
///< If the number of frames is unknown, -1 will be returned.
int LengthInSeconds(void) const;
///< Returns the length (in seconds) of this recording, or -1 in case of error.
bool IsNew(void) const { return GetResume() <= 0; }
bool IsEdited(void) const;
bool IsPesRecording(void) const { return isPesRecording; }
void ReadInfo(void);
bool WriteInfo(void);
void SetStartTime(time_t Start);
///< Sets the start time of this recording to the given value.
///< If a filename has already been set for this recording, it will be
///< deleted and a new one will be generated (using the new start time)
///< at the next call to FileName().
///< Use this function with care - it does not check whether a recording with
///< this new name already exists, and if there is one, results may be
///< unexpected!
bool Delete(void);
///< Changes the file name so that it will no longer be visible in the "Recordings" menu
///< Returns false in case of error
bool Remove(void);
///< Actually removes the file from the disk
///< Returns false in case of error
bool Undelete(void);
///< Changes the file name so that it will be visible in the "Recordings" menu again and
///< not processed by cRemoveDeletedRecordingsThread.
///< Returns false in case of error
};
class cRecordings : public cList<cRecording>, public cThread {
private:
static char *updateFileName;
bool deleted;
time_t lastUpdate;
int state;
const char *UpdateFileName(void);
void Refresh(bool Foreground = false);
void ScanVideoDir(const char *DirName, bool Foreground = false, int LinkLevel = 0);
protected:
void Action(void);
public:
cRecordings(bool Deleted = false);
virtual ~cRecordings();
bool Load(void) { return Update(true); }
///< Loads the current list of recordings and returns true if there
///< is anything in it (for compatibility with older plugins - use
///< Update(true) instead).
bool Update(bool Wait = false);
///< Triggers an update of the list of recordings, which will run
///< as a separate thread if Wait is false. If Wait is true, the
///< function returns only after the update has completed.
///< Returns true if Wait is true and there is anything in the list
///< of recordings, false otherwise.
void TouchUpdate(void);
///< Touches the '.update' file in the video directory, so that other
///< instances of VDR that access the same video directory can be triggered
///< to update their recordings list.
bool NeedsUpdate(void);
void ChangeState(void) { state++; }
bool StateChanged(int &State);
void ResetResume(const char *ResumeFileName = NULL);
cRecording *GetByName(const char *FileName);
void AddByName(const char *FileName, bool TriggerUpdate = true);
void DelByName(const char *FileName);
void UpdateByName(const char *FileName);
int TotalFileSizeMB(void); ///< Only for deleted recordings!
};
extern cRecordings Recordings;
extern cRecordings DeletedRecordings;
#define DEFAULTFRAMESPERSECOND 25.0
class cMark : public cListObject {
friend class cMarks; // for sorting
private:
double framesPerSecond;
#ifdef __RECORDING_H_DEPRECATED_DIRECT_MEMBER_ACCESS
public:
#endif
int position;
cString comment;
public:
cMark(int Position = 0, const char *Comment = NULL, double FramesPerSecond = DEFAULTFRAMESPERSECOND);
virtual ~cMark();
int Position(void) const { return position; }
const char *Comment(void) const { return comment; }
void SetPosition(int Position) { position = Position; }
void SetComment(const char *Comment) { comment = Comment; }
cString ToText(void);
bool Parse(const char *s);
bool Save(FILE *f);
};
class cMarks : public cConfig<cMark> {
private:
cString fileName;
double framesPerSecond;
time_t nextUpdate;
time_t lastFileTime;
time_t lastChange;
public:
bool Load(const char *RecordingFileName, double FramesPerSecond = DEFAULTFRAMESPERSECOND, bool IsPesRecording = false);
bool Update(void);
void Sort(void);
cMark *Add(int Position);
cMark *Get(int Position);
cMark *GetPrev(int Position);
cMark *GetNext(int Position);
};
#define RUC_BEFORERECORDING "before"
#define RUC_AFTERRECORDING "after"
#define RUC_EDITEDRECORDING "edited"
class cRecordingUserCommand {
private:
static const char *command;
public:
static void SetCommand(const char *Command) { command = Command; }
static void InvokeCommand(const char *State, const char *RecordingFileName);
};
// The maximum size of a single frame (up to HDTV 1920x1080):
#define MAXFRAMESIZE (KILOBYTE(1024) / TS_SIZE * TS_SIZE) // multiple of TS_SIZE to avoid breaking up TS packets
// The maximum file size is limited by the range that can be covered
// with a 40 bit 'unsigned int', which is 1TB. The actual maximum value
// used is 6MB below the theoretical maximum, to have some safety (the
// actual file size may be slightly higher because we stop recording only
// before the next independent frame, to have a complete Group Of Pictures):
#define MAXVIDEOFILESIZETS 1048570 // MB
#define MAXVIDEOFILESIZEPES 2000 // MB
#define MINVIDEOFILESIZE 100 // MB
#define MAXVIDEOFILESIZEDEFAULT MAXVIDEOFILESIZEPES
struct tIndexTs;
class cIndexFileGenerator;
class cIndexFile {
private:
int f;
cString fileName;
int size, last;
tIndexTs *index;
bool isPesRecording;
cResumeFile resumeFile;
cIndexFileGenerator *indexFileGenerator;
cMutex mutex;
static cString IndexFileName(const char *FileName, bool IsPesRecording);
void ConvertFromPes(tIndexTs *IndexTs, int Count);
void ConvertToPes(tIndexTs *IndexTs, int Count);
bool CatchUp(int Index = -1);
public:
cIndexFile(const char *FileName, bool Record, bool IsPesRecording = false);
~cIndexFile();
bool Ok(void) { return index != NULL; }
bool Write(bool Independent, uint16_t FileNumber, off_t FileOffset);
bool Get(int Index, uint16_t *FileNumber, off_t *FileOffset, bool *Independent = NULL, int *Length = NULL);
int GetNextIFrame(int Index, bool Forward, uint16_t *FileNumber = NULL, off_t *FileOffset = NULL, int *Length = NULL, bool StayOffEnd = false);
int Get(uint16_t FileNumber, off_t FileOffset);
int Last(void) { CatchUp(); return last; }
int GetResume(void) { return resumeFile.Read(); }
bool StoreResume(int Index) { return resumeFile.Save(Index); }
bool IsStillRecording(void);
void Delete(void);
static int GetLength(const char *FileName, bool IsPesRecording = false);
///< Calculates the recording length (number of frames) without actually reading the index file.
///< Returns -1 in case of error.
};
class cFileName {
private:
cUnbufferedFile *file;
uint16_t fileNumber;
char *fileName, *pFileNumber;
bool record;
bool blocking;
bool isPesRecording;
public:
cFileName(const char *FileName, bool Record, bool Blocking = false, bool IsPesRecording = false);
~cFileName();
const char *Name(void) { return fileName; }
uint16_t Number(void) { return fileNumber; }
bool GetLastPatPmtVersions(int &PatVersion, int &PmtVersion);
cUnbufferedFile *Open(void);
void Close(void);
cUnbufferedFile *SetOffset(int Number, off_t Offset = 0); // yes, Number is int for easier internal calculating
cUnbufferedFile *NextFile(void);
};
cString IndexToHMSF(int Index, bool WithFrame = false, double FramesPerSecond = DEFAULTFRAMESPERSECOND);
// Converts the given index to a string, optionally containing the frame number.
int HMSFToIndex(const char *HMSF, double FramesPerSecond = DEFAULTFRAMESPERSECOND);
// Converts the given string (format: "hh:mm:ss.ff") to an index.
int SecondsToFrames(int Seconds, double FramesPerSecond = DEFAULTFRAMESPERSECOND);
// Returns the number of frames corresponding to the given number of seconds.
int ReadFrame(cUnbufferedFile *f, uchar *b, int Length, int Max);
char *ExchangeChars(char *s, bool ToFileSystem);
// Exchanges the characters in the given string to or from a file system
// specific representation (depending on ToFileSystem). The given string will
// be modified and may be reallocated if more space is needed. The return
// value points to the resulting string, which may be different from s.
bool GenerateIndex(const char *FileName);
#endif //__RECORDING_H