vdr/config.h
Klaus Schmidinger 716c03a47e Version 2.1.3
VDR developer version 2.1.3 is now available at

       ftp://ftp.tvdr.de/vdr/Developer/vdr-2.1.3.tar.bz2

A 'diff' against the previous version is available at

       ftp://ftp.tvdr.de/vdr/Developer/vdr-2.1.2-2.1.3.diff

MD5 checksums:

054f80e0045aa6fad118e9285b52f4f2  vdr-2.1.3.tar.bz2
3c5ab05d5c4d0b984b34e84190e80949  vdr-2.1.2-2.1.3.diff

WARNING:
========

This is a *developer* version. Even though *I* use it in my productive
environment, I strongly recommend that you only use it under controlled
conditions and for testing and debugging.

Originally I intended to release this version only after the new DiSEqC
configuration dialog was finished. But in the meantime quite a few other things
have come up, so I decided to postpone that dialog and first release what has
piled up so far.

From the HISTORY file:
- Changed the return value of cPositioner::HorizonLongitude() to 0 in case the
  latitude of the antenna location is beyond +/-81 degrees.
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Fixed some compiler warnings with gcc-4.6.3 (thanks to Rolf Ahrenberg).
- Changed the name of the SVDRP command RENR to MOVR (suggested by Rolf Ahrenberg).
- When cutting a recording it is now checked whether there is already an edited
  version of this recording (with the same name, but starting with '%'), and the
  user is prompted for confirmation to overwrite it (suggested by Rolf Ahrenberg).
- Revoked "Added maximum signal strength value for TechniSat SkyStar 2 DVB-S rev 2.3P"
  because it broke things for the "TechniSat AirStar 2" DVB-T card.
- The LIRC remote control now connects to the socket even if it doesn't yet exist when
  VDR is started (thanks to Lars Hanisch).
- Changed the absolute latitude limit for visible satellites to 81.2 degrees.
- Added code for parsing LCN and AVC descriptors to libsi (thanks to Rolf Ahrenberg).
- In the "Select folder" menu pressing Ok now selects the folder, even if this is a
  folder that contains sub folders (marked with "..."). To open such a folder you
  can press the Red key.
- Fixed a possible access to uninitialized data in cEIT::cEIT() (reported by Dominik
  Strasser).
- The new menu category mcRecordingEdit is now used to mark menus that edit recording
  properties (suggested by Stefan Braun).
- Changes in the teletext PID no longer cause retuning (and thus interrupting a
  recording).
- Removed '_' from the FileNameChars and CharMap translations in uk_UA.po.
- Updated the Italian OSD texts (thanks to Diego Pierotto).
- Fixed a missing initialization in the c'tor of cSkinLCARSDisplayChannel (thanks to
  Marko Mäkelä).
- Simplified some conditional expressions in skinlcars.c and skinsttng.c (suggested
  by Marko Mäkelä).
- Fixed uninitialized item area coordinates in cSkinLCARSDisplayMenu (reported by
  Marko Mäkelä).
- Fixed a possible crash if the recordings list is updated externally while the
  Recordings menu is open (reported by Lars Hanisch).
- Added a missing closing ')' in the help and man page entry of the --vfat option
  (reported by Lars Hanisch).
- Fixed setting the name of the video directory to avoid a crash when using --genindex,
  and also to use the correct directory with --edit (the latter reported by Marko
  Mäkelä).
- The Recordings menu can now be called with a cRecordingFilter, which allows the
  caller to have it display only a certain subset of the recordings (thanks to Lars
  Hanisch).
- Added handling UTF-8 'umlaut' characters to cKbdRemote (thanks to Lars Hanisch).
- Made it clear that the Data parameter in cDevice::StillPicture() may point to a
  series of packets, not just a single one (thanks to Thomas Reufer).
- cDevice::TrickSpeed() now has an additional parameter named Forward, which indicates
  the direction in which replay is being done (suggested by Thomas Reufer). This
  information may be necessary for some output devices in order to properly implement
  trick modes. Authors of plugins that implement output devices will need to add this
  parameter to their derived cDevice class, regardless of whether they will make use
  of it or not.
- Added a note to ePlayMode in device.h that VDR itself always uses pmAudioVideo when
  replaying a recording (suggested by Thomas Reufer).
- Fixed some spellings in positioner.h and Doxyfile (thanks to Ville Skyttä).
- Changed '%a' to the POSIX compliant '%m' in all scanf() calls (thanks to Ville
  Skyttä).
- The new function cCamSlot::Decrypt() can be used by derived classes to implement a
  CAM slot that can be freely assigned to any device, without being directly inserted
  into the full TS data stream in hardware. A derived class that implements Decrypt()
  will also need to set the new parameter ReceiveCaPids in the call to the cCamSlot
  base class constructor to true, in order to receive the CA pid TS packets that
  contain data necessary for decrypting.
- Many member functions of cCamSlot have been made virtual to allow for easier
  implementation of derived classes.
- cTSBuffer now provides the number of available bytes in its Get() function.
- cDvbDevice::GetTSPacket() now calls CamSlot()->Decrypt() in order to allow CAM slots
  that can be freely assigned to any device access to the TS data stream.
- Added a check to avoid a possible NULL pointer dereference in cCiSession::SendData()
  (reported by Ville Skyttä).
- Deleted a superfluous assignment in cPipe::Open() (reported by Ville Skyttä).
- The script given to VDR with the '-r' option is now also called after the recording
  process has actually started (thanks to Christian Kaiser).
- Avoiding unnecessary pkg-config warnings in plugin Makefiles (thanks to Ville Skyttä).
  Plugin authors may want to apply the following change to their Makefile:
  -PKGCFG = $(if $(VDRDIR),$(shell pkg-config --variable=$(1) $(VDRDIR)/vdr.pc),$(shell pkg-config --variable=$(1) vdr || pkg-config --variable=$(1) ../../../vdr.pc))
  +PKGCFG = $(if $(VDRDIR),$(shell pkg-config --variable=$(1) $(VDRDIR)/vdr.pc),$(shell PKG_CONFIG_PATH="$$PKG_CONFIG_PATH:../../.." pkg-config --variable=$(1) vdr))
- Eliminated MAXDVBDEVICES (suggested by Oliver Endriss).
- Channels that are no longer contained in the current SDT of a transponder are now
  marked with the keyword OBSOLETE in their name and provider fields. That way you can
  identify obsolete channels when you switch to them, and you can get the complete
  overview of all obsolete channels by sorting the Channels list by provider (by
  pressing the 0 key twice). Automatic deletion of obsolete channels may follow later.
2014-01-06 18:37:32 +01:00

356 lines
9.9 KiB
C++

/*
* config.h: Configuration file handling
*
* See the main source file 'vdr.c' for copyright information and
* how to reach the author.
*
* $Id: config.h 3.5 2013/10/20 09:32:23 kls Exp $
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#include <arpa/inet.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <time.h>
#include <unistd.h>
#include "i18n.h"
#include "font.h"
#include "tools.h"
// VDR's own version number:
#define VDRVERSION "2.1.3"
#define VDRVERSNUM 20103 // Version * 10000 + Major * 100 + Minor
// The plugin API's version number:
#define APIVERSION "2.1.3"
#define APIVERSNUM 20103 // Version * 10000 + Major * 100 + Minor
// When loading plugins, VDR searches them by their APIVERSION, which
// may be smaller than VDRVERSION in case there have been no changes to
// VDR header files since the last APIVERSION. This allows compiled
// plugins to work with newer versions of the core VDR as long as no
// VDR header files have changed.
#define MAXPRIORITY 99
#define MINPRIORITY (-MAXPRIORITY)
#define LIVEPRIORITY 0 // priority used when selecting a device for live viewing
#define TRANSFERPRIORITY (LIVEPRIORITY - 1) // priority used for actual local Transfer Mode
#define IDLEPRIORITY (MINPRIORITY - 1) // priority of an idle device
#define MAXLIFETIME 99
#define DEFINSTRECTIME 180 // default instant recording time (minutes)
#define TIMERMACRO_TITLE "TITLE"
#define TIMERMACRO_EPISODE "EPISODE"
#define MINOSDWIDTH 480
#define MAXOSDWIDTH 1920
#define MINOSDHEIGHT 324
#define MAXOSDHEIGHT 1200
#define MaxFileName NAME_MAX // obsolete - use NAME_MAX directly instead!
#define MaxSkinName 16
#define MaxThemeName 16
// Basically VDR works according to the DVB standard, but there are countries/providers
// that use other standards, which in some details deviate from the DVB standard.
// This makes it necessary to handle things differently in some areas, depending on
// which standard is actually used. The following macros are used to distinguish
// these cases (make sure to adjust cMenuSetupDVB::standardComplianceTexts accordingly
// when adding a new standard):
#define STANDARD_DVB 0
#define STANDARD_ANSISCTE 1
typedef uint32_t in_addr_t; //XXX from /usr/include/netinet/in.h (apparently this is not defined on systems with glibc < 2.2)
class cSVDRPhost : public cListObject {
private:
struct in_addr addr;
in_addr_t mask;
public:
cSVDRPhost(void);
bool Parse(const char *s);
bool IsLocalhost(void);
bool Accepts(in_addr_t Address);
};
class cSatCableNumbers {
private:
int size;
int *array;
public:
cSatCableNumbers(int Size, const char *s = NULL);
~cSatCableNumbers();
int Size(void) const { return size; }
int *Array(void) { return array; }
bool FromString(const char *s);
cString ToString(void);
int FirstDeviceIndex(int DeviceIndex) const;
///< Returns the first device index (starting at 0) that uses the same
///< sat cable number as the device with the given DeviceIndex.
///< If the given device does not use the same sat cable as any other device,
///< or if the resulting value would be the same as DeviceIndex,
///< or if DeviceIndex is out of range, -1 is returned.
};
template<class T> class cConfig : public cList<T> {
private:
char *fileName;
bool allowComments;
void Clear(void)
{
free(fileName);
fileName = NULL;
cList<T>::Clear();
}
public:
cConfig(void) { fileName = NULL; }
virtual ~cConfig() { free(fileName); }
const char *FileName(void) { return fileName; }
bool Load(const char *FileName = NULL, bool AllowComments = false, bool MustExist = false)
{
cConfig<T>::Clear();
if (FileName) {
free(fileName);
fileName = strdup(FileName);
allowComments = AllowComments;
}
bool result = !MustExist;
if (fileName && access(fileName, F_OK) == 0) {
isyslog("loading %s", fileName);
FILE *f = fopen(fileName, "r");
if (f) {
char *s;
int line = 0;
cReadLine ReadLine;
result = true;
while ((s = ReadLine.Read(f)) != NULL) {
line++;
if (allowComments) {
char *p = strchr(s, '#');
if (p)
*p = 0;
}
stripspace(s);
if (!isempty(s)) {
T *l = new T;
if (l->Parse(s))
this->Add(l);
else {
esyslog("ERROR: error in %s, line %d", fileName, line);
delete l;
result = false;
}
}
}
fclose(f);
}
else {
LOG_ERROR_STR(fileName);
result = false;
}
}
if (!result)
fprintf(stderr, "vdr: error while reading '%s'\n", fileName);
return result;
}
bool Save(void)
{
bool result = true;
T *l = (T *)this->First();
cSafeFile f(fileName);
if (f.Open()) {
while (l) {
if (!l->Save(f)) {
result = false;
break;
}
l = (T *)l->Next();
}
if (!f.Close())
result = false;
}
else
result = false;
return result;
}
};
class cNestedItem : public cListObject {
private:
char *text;
cList<cNestedItem> *subItems;
public:
cNestedItem(const char *Text, bool WithSubItems = false);
virtual ~cNestedItem();
virtual int Compare(const cListObject &ListObject) const;
const char *Text(void) const { return text; }
cList<cNestedItem> *SubItems(void) { return subItems; }
void AddSubItem(cNestedItem *Item);
void SetText(const char *Text);
void SetSubItems(bool On);
};
class cNestedItemList : public cList<cNestedItem> {
private:
char *fileName;
bool Parse(FILE *f, cList<cNestedItem> *List, int &Line);
bool Write(FILE *f, cList<cNestedItem> *List, int Indent = 0);
public:
cNestedItemList(void);
virtual ~cNestedItemList();
void Clear(void);
bool Load(const char *FileName);
bool Save(void);
};
class cSVDRPhosts : public cConfig<cSVDRPhost> {
public:
bool LocalhostOnly(void);
bool Acceptable(in_addr_t Address);
};
extern cNestedItemList Folders;
extern cNestedItemList Commands;
extern cNestedItemList RecordingCommands;
extern cSVDRPhosts SVDRPhosts;
class cSetupLine : public cListObject {
private:
char *plugin;
char *name;
char *value;
public:
cSetupLine(void);
cSetupLine(const char *Name, const char *Value, const char *Plugin = NULL);
virtual ~cSetupLine();
virtual int Compare(const cListObject &ListObject) const;
const char *Plugin(void) { return plugin; }
const char *Name(void) { return name; }
const char *Value(void) { return value; }
bool Parse(char *s);
bool Save(FILE *f);
};
class cSetup : public cConfig<cSetupLine> {
friend class cPlugin; // needs to be able to call Store()
private:
void StoreLanguages(const char *Name, int *Values);
bool ParseLanguages(const char *Value, int *Values);
bool Parse(const char *Name, const char *Value);
cSetupLine *Get(const char *Name, const char *Plugin = NULL);
void Store(const char *Name, const char *Value, const char *Plugin = NULL, bool AllowMultiple = false);
void Store(const char *Name, int Value, const char *Plugin = NULL);
void Store(const char *Name, double &Value, const char *Plugin = NULL);
public:
// Also adjust cMenuSetup (menu.c) when adding parameters here!
int __BeginData__;
char OSDLanguage[I18N_MAX_LOCALE_LEN];
char OSDSkin[MaxSkinName];
char OSDTheme[MaxThemeName];
int PrimaryDVB;
int ShowInfoOnChSwitch;
int TimeoutRequChInfo;
int MenuScrollPage;
int MenuScrollWrap;
int MenuKeyCloses;
int MarkInstantRecord;
char NameInstantRecord[NAME_MAX + 1];
int InstantRecordTime;
int LnbSLOF;
int LnbFrequLo;
int LnbFrequHi;
int DiSEqC;
int UsePositioner;
int SiteLat;
int SiteLon;
int PositionerSpeed;
int PositionerSwing;
int PositionerLastLon;
int SetSystemTime;
int TimeSource;
int TimeTransponder;
int StandardCompliance;
int MarginStart, MarginStop;
int AudioLanguages[I18N_MAX_LANGUAGES + 1];
int DisplaySubtitles;
int SubtitleLanguages[I18N_MAX_LANGUAGES + 1];
int SubtitleOffset;
int SubtitleFgTransparency, SubtitleBgTransparency;
int EPGLanguages[I18N_MAX_LANGUAGES + 1];
int EPGScanTimeout;
int EPGBugfixLevel;
int EPGLinger;
int SVDRPTimeout;
int ZapTimeout;
int ChannelEntryTimeout;
int RcRepeatDelay;
int RcRepeatDelta;
int DefaultPriority, DefaultLifetime;
int PausePriority, PauseLifetime;
int PauseKeyHandling;
int UseSubtitle;
int UseVps;
int VpsMargin;
int RecordingDirs;
int FoldersInTimerMenu;
int AlwaysSortFoldersFirst;
int NumberKeysForChars;
int ColorKey0, ColorKey1, ColorKey2, ColorKey3;
int VideoDisplayFormat;
int VideoFormat;
int UpdateChannels;
int UseDolbyDigital;
int ChannelInfoPos;
int ChannelInfoTime;
double OSDLeftP, OSDTopP, OSDWidthP, OSDHeightP;
int OSDLeft, OSDTop, OSDWidth, OSDHeight;
double OSDAspect;
int OSDMessageTime;
int UseSmallFont;
int AntiAlias;
char FontOsd[MAXFONTNAME];
char FontSml[MAXFONTNAME];
char FontFix[MAXFONTNAME];
double FontOsdSizeP;
double FontSmlSizeP;
double FontFixSizeP;
int FontOsdSize;
int FontSmlSize;
int FontFixSize;
int MaxVideoFileSize;
int SplitEditedFiles;
int DelTimeshiftRec;
int MinEventTimeout, MinUserInactivity;
time_t NextWakeupTime;
int MultiSpeedMode;
int ShowReplayMode;
int ShowRemainingTime;
int ProgressDisplayTime;
int PauseOnMarkSet;
int ResumeID;
int CurrentChannel;
int CurrentVolume;
int CurrentDolby;
int InitialVolume;
int ChannelsWrap;
int ShowChannelNamesWithSource;
int EmergencyExit;
int __EndData__;
cString InitialChannel;
cString DeviceBondings;
cSetup(void);
cSetup& operator= (const cSetup &s);
bool Load(const char *FileName);
bool Save(void);
};
extern cSetup Setup;
#endif //__CONFIG_H