vdr/config.h
Klaus Schmidinger 8f9cc68f76 Version 0.85
- Added Norwegian language texts (thanks to Jørgen Tvedt).
- Increased the usleep value in cDvbOsd::Cmd() to 5000 in order to work on
  systems with the KURT/utime-patch (thanks to Guido Fiala).
- Changed the check whether the driver is loaded in runvdr to check for the
  'dvb' module (the last one loaded).
- Fixed repeat function with LIRC (thanks to Stefan Huelswitt).
- Increased the upper limit for the symbol rate to 30000 (thanks to Ulrich
  Röder).
- Made the position of the channel display configurable (thanks to Stefan
  Huelswitt).
- Made the width and height of the OSD configurable (thanks to Stefan Huelswitt).
- DiSEqC support can now be generally enabled/disabled in the Setup menu. This
  may be necessary if your multiswitch gets irritated by the default DiSEqC
  codes '0' (thanks to Markus Lang).
- Fixed replaying in case there is no index file.
- Fixed jumping to an editing mark when replay has been paused.
- Avoiding unnecessary code execution in the replay progress display (thanks
  to Guido Fiala).
- When entering time values the digits that still have to be entered are now
  shown as '-' (as in "1-:--").
- When setting an editing mark while the progress display is not active, the
  display will now be turned on for a short while to indicate the successful
  setting of the mark.
- Updated 'channels.conf' for Premiere World (thanks to Helmut Schächner).
  Check your timers if you use this channels.conf file, since the sequence of
  several PW channels has been changed.
- Changed the color of "Info" messages to "black on green" and that of the
  confirmation messages (like "Delete...") to "black on yellow".
- Fixed display with DEBUG_OSD (it still crashes sometimes, esp. when replaying,
  but I can't seem to find what causes this... any ideas anybody?).
- Avoiding audio/video distortions in 'Transfer Mode' by no longer actually
  tuning the primary interface (which can't receive this channel, anyway).
  Apparently the driver gets irritated when the channel is switched and a
  replay session is started immediately after that.
- Increased timeout until reporting "video data stream broken" when recording.
- Explicitly switching back to the previously active channel after ending a
  replay session (to have it shown correctly in case it was in 'Transfer Mode').
2001-07-29 18:00:00 +02:00

297 lines
6.8 KiB
C++

/*
* config.h: Configuration file handling
*
* See the main source file 'vdr.c' for copyright information and
* how to reach the author.
*
* $Id: config.h 1.55 2001/07/27 13:32:53 kls Exp $
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#define _GNU_SOURCE
#include <stdio.h>
#include <string.h>
#include <time.h>
#include <unistd.h>
#include "dvbapi.h"
#include "eit.h"
#include "tools.h"
#define VDRVERSION "0.85"
#define MaxBuffer 10000
#define MAXPRIORITY 99
#define MAXLIFETIME 99
#define MINOSDWIDTH 40
#define MAXOSDWIDTH 56
#define MINOSDHEIGHT 12
#define MAXOSDHEIGHT 21
enum eKeys { // "Up" and "Down" must be the first two keys!
kUp,
kDown,
kMenu,
kOk,
kBack,
kLeft,
kRight,
kRed,
kGreen,
kYellow,
kBlue,
k0, k1, k2, k3, k4, k5, k6, k7, k8, k9,
kNone,
// The following flags are OR'd with the above codes:
k_Repeat = 0x8000,
k_Release = 0x4000,
k_Flags = k_Repeat | k_Release,
};
// This is in preparation for having more key codes:
#define kMarkToggle k0
#define kMarkMoveBack k4
#define kMarkMoveForward k6
#define kMarkJumpBack k7
#define kMarkJumpForward k9
#define kEditCut k2
#define kEditTest k8
#define RAWKEY(k) ((k) & ~k_Flags)
#define ISRAWKEY(k) ((k) != kNone && ((k) & k_Flags) == 0)
#define NORMALKEY(k) ((k) & ~k_Repeat)
struct tKey {
eKeys type;
char *name;
unsigned int code;
};
class cKeys {
private:
char *fileName;
public:
unsigned char code;
unsigned short address;
tKey *keys;
cKeys(void);
void Clear(void);
void SetDummyValues(void);
bool Load(const char *FileName = NULL);
bool Save(void);
eKeys Translate(const char *Command);
unsigned int Encode(const char *Command);
eKeys Get(unsigned int Code);
void Set(eKeys Key, unsigned int Code);
};
class cChannel : public cListObject {
private:
static char *buffer;
static const char *ToText(cChannel *Channel);
public:
enum { MaxChannelName = 32 }; // 31 chars + terminating 0!
char name[MaxChannelName];
int frequency; // MHz
char polarization;
int diseqc;
int srate;
int vpid;
int apid1, apid2;
int dpid1, dpid2;
int tpid;
int ca;
int pnr;
int number; // Sequence number assigned on load
bool groupSep;
cChannel(void);
cChannel(const cChannel *Channel);
const char *ToText(void);
bool Parse(const char *s);
bool Save(FILE *f);
bool Switch(cDvbApi *DvbApi = NULL, bool Log = true);
};
class cTimer : public cListObject {
private:
time_t startTime, stopTime;
static char *buffer;
static const char *ToText(cTimer *Timer);
public:
enum { MaxFileName = 256 };
bool recording;
int active;
int channel;
int day;
int start;
int stop;
//TODO VPS???
int priority;
int lifetime;
char file[MaxFileName];
char *summary;
cTimer(bool Instant = false);
cTimer(const cEventInfo *EventInfo);
virtual ~cTimer();
cTimer& operator= (const cTimer &Timer);
const char *ToText(void);
bool Parse(const char *s);
bool Save(FILE *f);
bool IsSingleEvent(void);
bool Matches(time_t t = 0);
time_t StartTime(void);
time_t StopTime(void);
void SetRecording(bool Recording);
static cTimer *GetMatch(void);
static int TimeToInt(int t);
static time_t Day(time_t t);
static int ParseDay(const char *s);
static const char *PrintDay(int d);
};
class cCommand : public cListObject {
private:
char *title;
char *command;
static char *result;
public:
cCommand(void);
virtual ~cCommand();
bool Parse(const char *s);
const char *Title(void) { return title; }
const char *Execute(void);
};
template<class T> class cConfig : public cList<T> {
private:
char *fileName;
void Clear(void)
{
delete fileName;
cList<T>::Clear();
}
public:
cConfig(void) { fileName = NULL; }
virtual ~cConfig() { delete fileName; }
virtual bool Load(const char *FileName)
{
Clear();
fileName = strdup(FileName);
bool result = false;
if (access(FileName, F_OK) == 0) {
isyslog(LOG_INFO, "loading %s", FileName);
FILE *f = fopen(fileName, "r");
if (f) {
int line = 0;
char buffer[MaxBuffer];
result = true;
while (fgets(buffer, sizeof(buffer), f) > 0) {
line++;
if (!isempty(buffer)) {
T *l = new T;
if (l->Parse(buffer))
Add(l);
else {
esyslog(LOG_ERR, "error in %s, line %d\n", fileName, line);
delete l;
result = false;
break;
}
}
}
fclose(f);
}
else
LOG_ERROR_STR(fileName);
}
return result;
}
bool Save(void)
{
bool result = true;
T *l = (T *)First();
cSafeFile f(fileName);
if (f.Open()) {
while (l) {
if (!l->Save(f)) {
result = false;
break;
}
l = (T *)l->Next();
}
f.Close();
}
else
result = false;
return result;
}
};
class cChannels : public cConfig<cChannel> {
protected:
int maxNumber;
public:
cChannels(void) { maxNumber = 0; }
virtual bool Load(const char *FileName);
int GetNextGroup(int Idx); // Get next channel group
int GetPrevGroup(int Idx); // Get previous channel group
int GetNextNormal(int Idx); // Get next normal channel (not group)
void ReNumber(void); // Recalculate 'number' based on channel type
cChannel *GetByNumber(int Number);
cChannel *GetByServiceID(unsigned short ServiceId);
const char *GetChannelNameByNumber(int Number);
bool SwitchTo(int Number, cDvbApi *DvbApi = NULL);
int MaxNumber(void) { return maxNumber; }
};
class cTimers : public cConfig<cTimer> {
public:
cTimer *GetTimer(cTimer *Timer);
};
class cCommands : public cConfig<cCommand> {};
extern int CurrentGroup;
extern cChannels Channels;
extern cTimers Timers;
extern cKeys Keys;
extern cCommands Commands;
class cSetup {
private:
static char *fileName;
bool Parse(char *s);
public:
// Also adjust cMenuSetup (menu.c) when adding parameters here!
int OSDLanguage;
int PrimaryDVB;
int ShowInfoOnChSwitch;
int MenuScrollPage;
int MarkInstantRecord;
int LnbSLOF;
int LnbFrequLo;
int LnbFrequHi;
int DiSEqC;
int SetSystemTime;
int MarginStart, MarginStop;
int EPGScanTimeout;
int SVDRPTimeout;
int PrimaryLimit;
int DefaultPriority, DefaultLifetime;
int VideoFormat;
int ChannelInfoPos;
int OSDwidth, OSDheight;
int CurrentChannel;
cSetup(void);
bool Load(const char *FileName);
bool Save(const char *FileName = NULL);
};
extern cSetup Setup;
#endif //__CONFIG_H