vdr/device.c
Klaus Schmidinger da948a50d2 Version 1.3.38
- Fixed handling second audio and Dolby Digital PIDs for encrypted channels
  (was broken in version 1.3.37).
- Improved TS/PES conversion to better handle lost TS packets (thanks to
  Reinhard Nissl).
- Limited the frequency of log messages from the cRepackers.
- Now using the gettid() syscall to get a thread's pid, so that we get a
  useful value on NPTL systems (suggested by Johannes Stezenbach).
- Fixed the RCU remote control handling to avoid problems with NPTL (thanks
  to Andreas Share for reporting a lockup with the RCU on NPTL systems).
- When displaying the amount of free disk space, the space consumed by
  recordings that have been "deleted" but not yet actually "removed" is now
  taken into account (suggested by Christian Vogt).
- Now avoiding unnecessary disk access when checking if there are deleted
  recordings that need to be removed (reported by Carsten Koch).
- Fixed handling the DELETEDLIFETIME when removing deleted recordings. Now
  a deleted recording is retained at least DELETEDLIFETIME seconds before
  actually removing it.
  The value of DELETEDLIFETIME has been changed to 300. So after (possibly
  inadvertently) deleting a recording, there will be at least 5 minutes
  in which it can be recovered (unless a new recording immediately requires
  the disk space). The count starts again at 0 every time VDR is started.
- Fixed a possible crash when displaying the "Low disk space!" message from
  a background thread (thanks to Christof Steininger).
- Fixed handling OSD areas that have invalid sizes (thanks to Marco Schlüßler).
- Added a mutex to AssertFreeDiskSpace() to make sure calls from foreground
  and background threads won't interfere.
- The main menu now dynamically updates its contents in case an instant
  recording or replay stops, etc.
- The version number of EPG events is now also stored in the epg.data file
  (thanks to Kendy Kutzner).
- EPG events that are no longer in the currently broadcasted data stream are
  now automatically deleted.
- Removed an invalid access to Event->schedule in cSchedule::DelEvent().
- Modified cSchedule::Cleanup() (events are always sorted by time).
- Schedules are now cleaned up once every hour (not only at 05:00).
- The "Schedule" and "What's on now/next?" menus are now updated if a timer
  is set or modified.
- cTimer no longer has its own 'schedule' member, it rather uses that of the
  event it has been set to.
- The "Red" button in the "Schedule", "What's on now/next?" and "Event" menus
  now immediately creates a timer for the selected event and marks it with 'T'.
  If the event is already marked with 'T', the "Red" button opens the "Edit
  timer" menu for that timer.
- Removing deleted recordings is now done in a separate thread.
- Dropped the unused "stop recording on primary interface" stuff.
- Converting a grabbed image to JPEG is now done with the new function
  RgbToJpeg() (see tools.h).
- The SVDRP command GRAB now determines the image type (JPEG or PNM) from the
  extension (".jpg", ".jpeg" or ".pnm") of the given file name. The explicit
  'jpeg' or 'pnm' parameter is still accepted for backward compatibility, but
  has no meaning any more.
- The function cDevice::GrabImage() no longer writes the grabbed image to a
  file, but rather returns a pointer to the image in memory. The wrapper
  function cDevice::GrabImageFile() can be used to write the grabbed image
  directly to a file. Plugins that used the old version of cDevice::GrabImage()
  need to be adapted to the new interface.
- The new class cBase64Encoder (see tools.h) can be used to encode data in
  base64 (thanks to Bob Withers for publishing his Base64 class).
- The SVDRP command GRAB now writes the image data to the SVDRP connection
  (encoded in base64) if the given file name consists of only the file
  extension (".jpg", ".jpeg" or ".pnm"), or if only "-" is given as file
  name (based on a suggestion from Darren Salt).
  A simple way of viewing a grabbed image on a remote host is:

  svdrpsend.pl -d <hostname> 'grab -' | sed -n -e 's/^216-//p' -e '1ibegin-base64 644 -' -e '$a====' | uudecode | display -

- The new command line option '-g' must be given if the SVDRP command GRAB
  shall be allowed to write image files to disk. The parameter to this option
  must be the full path name of an existing directory, without any "..", double
  '/' or symlinks. By default, or if "-g- is given, grabbing to files is
  not allowed any more because of potential security risks.
- Modified the way the SVDRP command GRAB writes the grabbed image to a file
  to avoid a security hole (CAN-2005-0071, reported by Javier Fernández-Sanguino
  Peña):
  + The file handle is now opened in a way that it won't follow symbolic links
    (suggested by Darren Salt).
  + The given file name is now canonicalized, so that it won't contain any
    ".." or symlinks (suggested by Darren Salt).
  + Grabbing to files is limited to the directory given in the the command
    line option '-g'. By default grabbing to files is not allowed any more.
- Updated the Greek OSD texts (thanks to Dimitrios Dimitrakos).
- Changed all "illegal" to "invalid" in error messages (there's nothing "illegal"
  in VDR ;-).
- When started as user 'root' VDR now switches to a lesser privileged user id,
  keeping the capability to set the system time (based on a patch from Ludwig
  Nussel). By default the user id 'vdr' is used, which can be changed through
  the new command line option '-u'. Note that for security reasons VDR will no
  longer run as user 'root' (unless you explicitly start it with '-u root',
  but this is not recommended!). The 'runvdr' script has been changed to
  use the '-u' option.
- Changed the API of the functions cStatus::Recording() and cStatus::Replaying(),
  so that they can provide the full file name of the recording. Plugins that use
  these (or the related cStatus::Msg...() functions) need to be adapted
  (suggested by Andreas Brugger).
- The DVB devices now retune (and, if applicable, resend the DiSEqC data) if
  the lock is lost (based on a patch from Reinhard Nissl).
- Fixed handling multi byte key sequences in cKbdRemote (based on a patch from
  Jürgen Schneider).
- Removed unused variables in skinclassic.c and skinsttng.c (thanks to Marco
  Schlüßler).
- Made the static cControl functions thread safe (thanks to Patrick Fischer).
- Fixed initializing pthread_mutexattr_t and pthread_rwlockattr_t to avoid
  warnings with g++ 4.1.0 (thanks to Ville Skyttä).
- Fixed incrementing the 'state' variables in the repacker classes in remux.c
  to avoid warnings with g++ 4.1.0 (reported by Ville Skyttä).
- The Makefile now reports a summary of failed plugins (thanks to Udo Richter).
- The cTimer constructor can now take an optional cChannel (suggested by
  Patrick Fischer).
- Fixed setting the main thread id if VDR is running as a daemon.
- Fixed handling TS packets in cTS2PES (thanks to Reinhard Nissl).
- Added cTimer::SetPriority() to set a timer's priority (suggested by Kendy Kutzner).
- Added cMenuEditStrItem::InEditMode() (suggested by Christian Wieninger).
- Now using FE_READ_STATUS to read the current frontend status (suggested by
  Holger Wächtler).
- The "Menu" key now behaves consistently. If there is anything on the OSD, it
  is closed when the "Menu" key is pressed, and if there is nothing on the OSD,
  the "Menu" key opens the main menu (suggested by Luca Olivetti).
- The new option "Setup/OSD/Timeout requested channel info" can be used to turn
  off the automatic timeout of the channel display in case it was invoked by
  a press of the "Ok" key (suggested by Thiemo Gehrke).
- A message is now given when an instant recording is started (suggested by
  Helmut Auer). Actually the code was already there, just commented out - don't
  remember why it wasn't active...
- Removed an obsolete "Summary" text from i18n.c and preceded all key definition
  texts with "Key$" to avoid duplicates (reported by Lucian Muresan).
- Preceded all button texts with "Button$".
- Removed obsolete "Eject", "Language" and "scanning recordings..." texts.
- Added missing #include "thread.h" to dvbspu.c (reported by Gavin Hamill).
- Disabled the use of "fadvise" in cUnbufferedFile because there have been
  several reports that it causes more problems than it solves (suggested by
  Petri Hintukainen). If you want to use "fadvise", you can activate the line
  //#define USE_FADVISE
  in tools.c.
- Removed unused 'offset' member from cOsdItem.
- In the "Channels" menu the numeric keys now position the cursor to the channel
  with the given number (see MANUAL, section "Remote Control Keys", note (3) for
  details).
- The "Mark/Move" function in the "Channels" menu now also works in the non-numeric
  sort modes.
- The default cOsdObject::Show() now automatically calls cOsdMenu::Display() if
  this is a menu.
- The new "Info" key brings up information on the currently viewed programme
  or recording. For a live programme this is the same as "Schedule/Ok", i.e. the
  description of the current EPG event. For a recording this is the same as shown
  by the "Info" button in the "Recordings" menu. Plugins that implement players
  can overwrite their cControl::GetInfo() function to show their own info (see
  PLUGINS.html for details). Pressing the "Info" key again while the info is
  displayed will close the OSD. In order to assign this new key to an existing
  remote control setup, the remote.conf file needs to be deleted and VDR has
  to be restarted to go through the process of learning the remote control keys.
- Any cReceivers still attached to a cDevice when that device switches to a
  different transponder are now automatically detached (suggested by Patrick
  Fischer).
- The "flags" of a timer are now handled as an unsigned integer value. In order
  to do this, the interface of cMenuEditBitItem also had to be changed.
- In string entry fields (like, e.g., the file name of a recording) the characters
  can now be entered by pressing the numeric keys, the same way as on a
  telephone keypad (based on the "Easy Input" patch from Marcel Schaeben).
- Fixed the "Day" field of the "Edit timer" menu when pressing '0' to switch
  from "single shot" to "weekly", followed by the "Right" key (reported by
  Andreas Böttger).
- The file 'ca.conf' is obsolete and has been removed.
- Revised all descriptions regarding CICAM.
- Adapted c(Dvb)Device::ProvidesCa() to the dynamic CA handling.
- Added a mutex to synchronize cDevice::PlayPesPacket() and SetCurrentAudioTrack()
  (thanks to Reinhard Nissl).
- Added a SleepMs() in cRecorder::Action() to avoid a busy loop (thanks to Ingo
  Schneider).
- Cleaned up some trailing white space.
2006-01-08 18:00:00 +01:00

1358 lines
36 KiB
C

/*
* device.c: The basic device interface
*
* See the main source file 'vdr.c' for copyright information and
* how to reach the author.
*
* $Id: device.c 1.121 2006/01/08 11:39:37 kls Exp $
*/
#include "device.h"
#include <errno.h>
#include <sys/ioctl.h>
#include <sys/mman.h>
#include "audio.h"
#include "channels.h"
#include "i18n.h"
#include "player.h"
#include "receiver.h"
#include "status.h"
#include "transfer.h"
// --- cPesAssembler ---------------------------------------------------------
class cPesAssembler {
private:
uchar *data;
uint32_t tag;
int length;
int size;
bool Realloc(int Size);
public:
cPesAssembler(void);
~cPesAssembler();
int ExpectedLength(void) { return PacketSize(data); }
static int PacketSize(const uchar *data);
int Length(void) { return length; }
const uchar *Data(void) { return data; } // only valid if Length() >= 4
void Reset(void);
void Put(uchar c);
void Put(const uchar *Data, int Length);
bool IsPes(void);
};
cPesAssembler::cPesAssembler(void)
{
data = NULL;
size = 0;
Reset();
}
cPesAssembler::~cPesAssembler()
{
free(data);
}
void cPesAssembler::Reset(void)
{
tag = 0xFFFFFFFF;
length = 0;
}
bool cPesAssembler::Realloc(int Size)
{
if (Size > size) {
size = max(Size, 2048);
data = (uchar *)realloc(data, size);
if (!data) {
esyslog("ERROR: can't allocate memory for PES assembler");
length = 0;
size = 0;
return false;
}
}
return true;
}
void cPesAssembler::Put(uchar c)
{
if (length < 4) {
tag = (tag << 8) | c;
if ((tag & 0xFFFFFF00) == 0x00000100) {
if (Realloc(4)) {
*(uint32_t *)data = htonl(tag);
length = 4;
}
}
else if (length < 3)
length++;
}
else if (Realloc(length + 1))
data[length++] = c;
}
void cPesAssembler::Put(const uchar *Data, int Length)
{
while (length < 4 && Length > 0) {
Put(*Data++);
Length--;
}
if (Length && Realloc(length + Length)) {
memcpy(data + length, Data, Length);
length += Length;
}
}
int cPesAssembler::PacketSize(const uchar *data)
{
// we need atleast 6 bytes of data here !!!
switch (data[3]) {
default:
case 0x00 ... 0xB8: // video stream start codes
case 0xB9: // Program end
case 0xBC: // Programm stream map
case 0xF0 ... 0xFF: // reserved
return 6;
case 0xBA: // Pack header
if ((data[4] & 0xC0) == 0x40) // MPEG2
return 14;
// to be absolutely correct we would have to add the stuffing bytes
// as well, but at this point we only may have 6 bytes of data avail-
// able. So it's up to the higher level to resync...
//return 14 + (data[13] & 0x07); // add stuffing bytes
else // MPEG1
return 12;
case 0xBB: // System header
case 0xBD: // Private stream1
case 0xBE: // Padding stream
case 0xBF: // Private stream2 (navigation data)
case 0xC0 ... 0xCF: // all the rest (the real packets)
case 0xD0 ... 0xDF:
case 0xE0 ... 0xEF:
return 6 + data[4] * 256 + data[5];
}
}
// --- cDevice ---------------------------------------------------------------
// The default priority for non-primary devices:
#define DEFAULTPRIORITY -1
int cDevice::numDevices = 0;
int cDevice::useDevice = 0;
int cDevice::nextCardIndex = 0;
int cDevice::currentChannel = 1;
cDevice *cDevice::device[MAXDEVICES] = { NULL };
cDevice *cDevice::primaryDevice = NULL;
cDevice::cDevice(void)
{
cardIndex = nextCardIndex++;
SetDescription("receiver on device %d", CardIndex() + 1);
SetVideoFormat(Setup.VideoFormat);
mute = false;
volume = Setup.CurrentVolume;
sectionHandler = NULL;
eitFilter = NULL;
patFilter = NULL;
sdtFilter = NULL;
nitFilter = NULL;
ciHandler = NULL;
player = NULL;
pesAssembler = new cPesAssembler;
ClrAvailableTracks();
currentAudioTrack = ttNone;
currentAudioTrackMissingCount = 0;
for (int i = 0; i < MAXRECEIVERS; i++)
receiver[i] = NULL;
if (numDevices < MAXDEVICES)
device[numDevices++] = this;
else
esyslog("ERROR: too many devices!");
}
cDevice::~cDevice()
{
Detach(player);
for (int i = 0; i < MAXRECEIVERS; i++)
Detach(receiver[i]);
delete ciHandler;
delete nitFilter;
delete sdtFilter;
delete patFilter;
delete eitFilter;
delete sectionHandler;
delete pesAssembler;
}
bool cDevice::WaitForAllDevicesReady(int Timeout)
{
for (time_t t0 = time(NULL); time(NULL) - t0 < Timeout; ) {
bool ready = true;
for (int i = 0; i < numDevices; i++) {
if (device[i] && !device[i]->Ready())
ready = false;
}
if (ready)
return true;
}
return false;
}
void cDevice::SetUseDevice(int n)
{
if (n < MAXDEVICES)
useDevice |= (1 << n);
}
int cDevice::NextCardIndex(int n)
{
if (n > 0) {
nextCardIndex += n;
if (nextCardIndex >= MAXDEVICES)
esyslog("ERROR: nextCardIndex too big (%d)", nextCardIndex);
}
else if (n < 0)
esyslog("ERROR: invalid value in IncCardIndex(%d)", n);
return nextCardIndex;
}
int cDevice::DeviceNumber(void) const
{
for (int i = 0; i < numDevices; i++) {
if (device[i] == this)
return i;
}
return -1;
}
void cDevice::MakePrimaryDevice(bool On)
{
}
bool cDevice::SetPrimaryDevice(int n)
{
n--;
if (0 <= n && n < numDevices && device[n]) {
isyslog("setting primary device to %d", n + 1);
if (primaryDevice)
primaryDevice->MakePrimaryDevice(false);
primaryDevice = device[n];
primaryDevice->MakePrimaryDevice(true);
primaryDevice->SetVideoFormat(Setup.VideoFormat);
return true;
}
esyslog("ERROR: invalid primary device number: %d", n + 1);
return false;
}
bool cDevice::HasDecoder(void) const
{
return false;
}
cSpuDecoder *cDevice::GetSpuDecoder(void)
{
return NULL;
}
cDevice *cDevice::ActualDevice(void)
{
cDevice *d = cTransferControl::ReceiverDevice();
if (!d)
d = PrimaryDevice();
return d;
}
cDevice *cDevice::GetDevice(int Index)
{
return (0 <= Index && Index < numDevices) ? device[Index] : NULL;
}
cDevice *cDevice::GetDevice(const cChannel *Channel, int Priority, bool *NeedsDetachReceivers)
{
cDevice *d = NULL;
int select = 8, pri;
for (int i = 0; i < numDevices; i++) {
bool ndr;
if (device[i]->ProvidesChannel(Channel, Priority, &ndr)) { // this device is basicly able to do the job
if (device[i]->Receiving() && !ndr)
pri = 0; // receiving and allows additional receivers
else if (d && !device[i]->Receiving() && device[i]->ProvidesCa(Channel) < d->ProvidesCa(Channel))
pri = 1; // free and fewer Ca's
else if (!device[i]->Receiving() && !device[i]->HasDecoder())
pri = 2; // free and not a full featured card
else if (!device[i]->Receiving() && !device[i]->IsPrimaryDevice())
pri = 3; // free and not the primary device
else if (!device[i]->Receiving())
pri = 4; // free
else if (d && device[i]->Priority() < d->Priority())
pri = 5; // receiving but priority is lower
else if (d && device[i]->Priority() == d->Priority() && device[i]->ProvidesCa(Channel) < d->ProvidesCa(Channel))
pri = 6; // receiving with same priority but fewer Ca's
else
pri = 7; // all others
if (pri <= select) {
select = pri;
d = device[i];
if (NeedsDetachReceivers)
*NeedsDetachReceivers = ndr;
}
}
}
return d;
}
void cDevice::Shutdown(void)
{
primaryDevice = NULL;
for (int i = 0; i < numDevices; i++) {
delete device[i];
device[i] = NULL;
}
}
uchar *cDevice::GrabImage(int &Size, bool Jpeg, int Quality, int SizeX, int SizeY)
{
return NULL;
}
bool cDevice::GrabImageFile(const char *FileName, bool Jpeg, int Quality, int SizeX, int SizeY)
{
int result = 0;
int fd = open(FileName, O_WRONLY | O_CREAT | O_NOFOLLOW | O_TRUNC, DEFFILEMODE);
if (fd >= 0) {
int ImageSize;
uchar *Image = GrabImage(ImageSize, Jpeg, Quality, SizeX, SizeY);
if (Image) {
if (safe_write(fd, Image, ImageSize) == ImageSize)
isyslog("grabbed image to %s", FileName);
else {
LOG_ERROR_STR(FileName);
result |= 1;
}
free(Image);
}
else
result |= 1;
close(fd);
}
else {
LOG_ERROR_STR(FileName);
result |= 1;
}
return result == 0;
}
void cDevice::SetVideoDisplayFormat(eVideoDisplayFormat VideoDisplayFormat)
{
cSpuDecoder *spuDecoder = GetSpuDecoder();
if (spuDecoder) {
if (Setup.VideoFormat)
spuDecoder->setScaleMode(cSpuDecoder::eSpuNormal);
else {
switch (VideoDisplayFormat) {
case vdfPanAndScan:
spuDecoder->setScaleMode(cSpuDecoder::eSpuPanAndScan);
break;
case vdfLetterBox:
spuDecoder->setScaleMode(cSpuDecoder::eSpuLetterBox);
break;
case vdfCenterCutOut:
spuDecoder->setScaleMode(cSpuDecoder::eSpuNormal);
break;
}
}
}
}
void cDevice::SetVideoFormat(bool VideoFormat16_9)
{
}
eVideoSystem cDevice::GetVideoSystem(void)
{
return vsPAL;
}
//#define PRINTPIDS(s) { char b[500]; char *q = b; q += sprintf(q, "%d %s ", CardIndex(), s); for (int i = 0; i < MAXPIDHANDLES; i++) q += sprintf(q, " %s%4d %d", i == ptOther ? "* " : "", pidHandles[i].pid, pidHandles[i].used); dsyslog(b); }
#define PRINTPIDS(s)
bool cDevice::HasPid(int Pid) const
{
for (int i = 0; i < MAXPIDHANDLES; i++) {
if (pidHandles[i].pid == Pid)
return true;
}
return false;
}
bool cDevice::AddPid(int Pid, ePidType PidType)
{
if (Pid || PidType == ptPcr) {
int n = -1;
int a = -1;
if (PidType != ptPcr) { // PPID always has to be explicit
for (int i = 0; i < MAXPIDHANDLES; i++) {
if (i != ptPcr) {
if (pidHandles[i].pid == Pid)
n = i;
else if (a < 0 && i >= ptOther && !pidHandles[i].used)
a = i;
}
}
}
if (n >= 0) {
// The Pid is already in use
if (++pidHandles[n].used == 2 && n <= ptTeletext) {
// It's a special PID that may have to be switched into "tap" mode
PRINTPIDS("A");
if (!SetPid(&pidHandles[n], n, true)) {
esyslog("ERROR: can't set PID %d on device %d", Pid, CardIndex() + 1);
if (PidType <= ptTeletext)
DetachAll(Pid);
DelPid(Pid, PidType);
return false;
}
if (ciHandler)
ciHandler->SetPid(Pid, true);
}
PRINTPIDS("a");
return true;
}
else if (PidType < ptOther) {
// The Pid is not yet in use and it is a special one
n = PidType;
}
else if (a >= 0) {
// The Pid is not yet in use and we have a free slot
n = a;
}
else {
esyslog("ERROR: no free slot for PID %d on device %d", Pid, CardIndex() + 1);
return false;
}
if (n >= 0) {
pidHandles[n].pid = Pid;
pidHandles[n].used = 1;
PRINTPIDS("C");
if (!SetPid(&pidHandles[n], n, true)) {
esyslog("ERROR: can't set PID %d on device %d", Pid, CardIndex() + 1);
if (PidType <= ptTeletext)
DetachAll(Pid);
DelPid(Pid, PidType);
return false;
}
if (ciHandler)
ciHandler->SetPid(Pid, true);
}
}
return true;
}
void cDevice::DelPid(int Pid, ePidType PidType)
{
if (Pid || PidType == ptPcr) {
int n = -1;
if (PidType == ptPcr)
n = PidType; // PPID always has to be explicit
else {
for (int i = 0; i < MAXPIDHANDLES; i++) {
if (pidHandles[i].pid == Pid) {
n = i;
break;
}
}
}
if (n >= 0 && pidHandles[n].used) {
PRINTPIDS("D");
if (--pidHandles[n].used < 2) {
SetPid(&pidHandles[n], n, false);
if (pidHandles[n].used == 0) {
pidHandles[n].handle = -1;
pidHandles[n].pid = 0;
if (ciHandler)
ciHandler->SetPid(Pid, false);
}
}
PRINTPIDS("E");
}
}
}
bool cDevice::SetPid(cPidHandle *Handle, int Type, bool On)
{
return false;
}
void cDevice::StartSectionHandler(void)
{
if (!sectionHandler) {
sectionHandler = new cSectionHandler(this);
AttachFilter(eitFilter = new cEitFilter);
AttachFilter(patFilter = new cPatFilter);
AttachFilter(sdtFilter = new cSdtFilter(patFilter));
AttachFilter(nitFilter = new cNitFilter);
}
}
int cDevice::OpenFilter(u_short Pid, u_char Tid, u_char Mask)
{
return -1;
}
void cDevice::AttachFilter(cFilter *Filter)
{
if (sectionHandler)
sectionHandler->Attach(Filter);
}
void cDevice::Detach(cFilter *Filter)
{
if (sectionHandler)
sectionHandler->Detach(Filter);
}
bool cDevice::ProvidesSource(int Source) const
{
return false;
}
bool cDevice::ProvidesTransponder(const cChannel *Channel) const
{
return false;
}
bool cDevice::ProvidesTransponderExclusively(const cChannel *Channel) const
{
for (int i = 0; i < numDevices; i++) {
if (device[i] && device[i] != this && device[i]->ProvidesTransponder(Channel))
return false;
}
return true;
}
bool cDevice::ProvidesChannel(const cChannel *Channel, int Priority, bool *NeedsDetachReceivers) const
{
return false;
}
bool cDevice::MaySwitchTransponder(void)
{
return !Receiving(true) && !(pidHandles[ptAudio].pid || pidHandles[ptVideo].pid || pidHandles[ptDolby].pid);
}
bool cDevice::SwitchChannel(const cChannel *Channel, bool LiveView)
{
if (LiveView)
isyslog("switching to channel %d", Channel->Number());
for (int i = 3; i--;) {
switch (SetChannel(Channel, LiveView)) {
case scrOk: return true;
case scrNotAvailable: Skins.Message(mtInfo, tr("Channel not available!"));
return false;
case scrNoTransfer: Skins.Message(mtError, tr("Can't start Transfer Mode!"));
return false;
case scrFailed: break; // loop will retry
}
esyslog("retrying");
}
return false;
}
bool cDevice::SwitchChannel(int Direction)
{
bool result = false;
Direction = sgn(Direction);
if (Direction) {
int n = CurrentChannel() + Direction;
int first = n;
cChannel *channel;
while ((channel = Channels.GetByNumber(n, Direction)) != NULL) {
// try only channels which are currently available
if (PrimaryDevice()->ProvidesChannel(channel, Setup.PrimaryLimit) || PrimaryDevice()->CanReplay() && GetDevice(channel, 0))
break;
n = channel->Number() + Direction;
}
if (channel) {
int d = n - first;
if (abs(d) == 1)
dsyslog("skipped channel %d", first);
else if (d)
dsyslog("skipped channels %d..%d", first, n - sgn(d));
if (PrimaryDevice()->SwitchChannel(channel, true))
result = true;
}
else if (n != first)
Skins.Message(mtError, tr("Channel not available!"));
}
return result;
}
eSetChannelResult cDevice::SetChannel(const cChannel *Channel, bool LiveView)
{
if (LiveView)
StopReplay();
// If this card is switched to an other transponder, any receivers still
// attached to it ineed to be automatically detached:
bool NeedsDetachReceivers = false;
// If this card can't receive this channel, we must not actually switch
// the channel here, because that would irritate the driver when we
// start replaying in Transfer Mode immediately after switching the channel:
bool NeedsTransferMode = (LiveView && IsPrimaryDevice() && !ProvidesChannel(Channel, Setup.PrimaryLimit, &NeedsDetachReceivers));
eSetChannelResult Result = scrOk;
// If this DVB card can't receive this channel, let's see if we can
// use the card that actually can receive it and transfer data from there:
if (NeedsTransferMode) {
cDevice *CaDevice = GetDevice(Channel, 0, &NeedsDetachReceivers);
if (CaDevice && CanReplay()) {
cStatus::MsgChannelSwitch(this, 0); // only report status if we are actually going to switch the channel
if (CaDevice->SetChannel(Channel, false) == scrOk) { // calling SetChannel() directly, not SwitchChannel()!
if (NeedsDetachReceivers)
CaDevice->DetachAllReceivers();
cControl::Launch(new cTransferControl(CaDevice, Channel->Vpid(), Channel->Apids(), Channel->Dpids(), Channel->Spids()));
}
else
Result = scrNoTransfer;
}
else
Result = scrNotAvailable;
}
else {
Channels.Lock(false);
cStatus::MsgChannelSwitch(this, 0); // only report status if we are actually going to switch the channel
// Stop section handling:
if (sectionHandler) {
sectionHandler->SetStatus(false);
sectionHandler->SetChannel(NULL);
}
// Tell the ciHandler about the channel switch and add all PIDs of this
// channel to it, for possible later decryption:
if (ciHandler) {
ciHandler->SetSource(Channel->Source(), Channel->Transponder());
// Men at work - please stand clear! ;-)
#ifdef XXX_DO_MULTIPLE_CA_CHANNELS
if (Channel->Ca() >= CA_ENCRYPTED_MIN) {
#endif
ciHandler->AddPid(Channel->Sid(), Channel->Vpid(), 2);
for (const int *Apid = Channel->Apids(); *Apid; Apid++)
ciHandler->AddPid(Channel->Sid(), *Apid, 4);
for (const int *Dpid = Channel->Dpids(); *Dpid; Dpid++)
ciHandler->AddPid(Channel->Sid(), *Dpid, 0);
#ifdef XXX_DO_MULTIPLE_CA_CHANNELS
bool CanDecrypt = ciHandler->CanDecrypt(Channel->Sid());//XXX
dsyslog("CanDecrypt %d %d %d %s", CardIndex() + 1, CanDecrypt, Channel->Number(), Channel->Name());//XXX
}
#endif
}
if (NeedsDetachReceivers)
DetachAllReceivers();
if (SetChannelDevice(Channel, LiveView)) {
// Start section handling:
if (sectionHandler) {
sectionHandler->SetChannel(Channel);
sectionHandler->SetStatus(true);
}
// Start decrypting any PIDs that might have been set in SetChannelDevice():
if (ciHandler)
ciHandler->StartDecrypting();
}
else
Result = scrFailed;
Channels.Unlock();
}
if (Result == scrOk) {
if (LiveView && IsPrimaryDevice()) {
currentChannel = Channel->Number();
// Set the available audio tracks:
ClrAvailableTracks();
for (int i = 0; i < MAXAPIDS; i++)
SetAvailableTrack(ttAudio, i, Channel->Apid(i), Channel->Alang(i));
if (Setup.UseDolbyDigital) {
for (int i = 0; i < MAXDPIDS; i++)
SetAvailableTrack(ttDolby, i, Channel->Dpid(i), Channel->Dlang(i));
}
if (!NeedsTransferMode)
EnsureAudioTrack(true);
}
cStatus::MsgChannelSwitch(this, Channel->Number()); // only report status if channel switch successfull
}
return Result;
}
bool cDevice::SetChannelDevice(const cChannel *Channel, bool LiveView)
{
return false;
}
bool cDevice::HasLock(int TimeoutMs)
{
return true;
}
bool cDevice::HasProgramme(void)
{
return Replaying() || pidHandles[ptAudio].pid || pidHandles[ptVideo].pid;
}
int cDevice::GetAudioChannelDevice(void)
{
return 0;
}
void cDevice::SetAudioChannelDevice(int AudioChannel)
{
}
void cDevice::SetVolumeDevice(int Volume)
{
}
void cDevice::SetDigitalAudioDevice(bool On)
{
}
void cDevice::SetAudioTrackDevice(eTrackType Type)
{
}
bool cDevice::ToggleMute(void)
{
int OldVolume = volume;
mute = !mute;
//XXX why is it necessary to use different sequences???
if (mute) {
SetVolume(0, mute);
Audios.MuteAudio(mute); // Mute external audio after analog audio
}
else {
Audios.MuteAudio(mute); // Enable external audio before analog audio
SetVolume(0, mute);
}
volume = OldVolume;
return mute;
}
int cDevice::GetAudioChannel(void)
{
int c = GetAudioChannelDevice();
return (0 <= c && c <= 2) ? c : 0;
}
void cDevice::SetAudioChannel(int AudioChannel)
{
if (0 <= AudioChannel && AudioChannel <= 2)
SetAudioChannelDevice(AudioChannel);
}
void cDevice::SetVolume(int Volume, bool Absolute)
{
volume = min(max(Absolute ? Volume : volume + Volume, 0), MAXVOLUME);
SetVolumeDevice(volume);
cStatus::MsgSetVolume(volume, Absolute);
if (volume > 0) {
mute = false;
Audios.MuteAudio(mute);
}
}
void cDevice::ClrAvailableTracks(bool DescriptionsOnly)
{
if (DescriptionsOnly) {
for (int i = ttNone; i < ttMaxTrackTypes; i++)
*availableTracks[i].description = 0;
}
else {
memset(availableTracks, 0, sizeof(availableTracks));
pre_1_3_19_PrivateStream = false;
SetAudioChannel(0); // fall back to stereo
currentAudioTrackMissingCount = 0;
currentAudioTrack = ttNone;
}
}
bool cDevice::SetAvailableTrack(eTrackType Type, int Index, uint16_t Id, const char *Language, const char *Description)
{
eTrackType t = eTrackType(Type + Index);
if (Type == ttAudio && IS_AUDIO_TRACK(t) ||
Type == ttDolby && IS_DOLBY_TRACK(t)) {
if (Language)
strn0cpy(availableTracks[t].language, Language, sizeof(availableTracks[t].language));
if (Description)
strn0cpy(availableTracks[t].description, Description, sizeof(availableTracks[t].description));
if (Id) {
availableTracks[t].id = Id; // setting 'id' last to avoid the need for extensive locking
int numAudioTracks = NumAudioTracks();
if (!availableTracks[currentAudioTrack].id && numAudioTracks && currentAudioTrackMissingCount++ > numAudioTracks * 10)
EnsureAudioTrack();
else if (t == currentAudioTrack)
currentAudioTrackMissingCount = 0;
}
return true;
}
else
esyslog("ERROR: SetAvailableTrack called with invalid Type/Index (%d/%d)", Type, Index);
return false;
}
const tTrackId *cDevice::GetTrack(eTrackType Type)
{
return (ttNone < Type && Type < ttMaxTrackTypes) ? &availableTracks[Type] : NULL;
}
int cDevice::NumAudioTracks(void) const
{
int n = 0;
for (int i = ttAudioFirst; i <= ttDolbyLast; i++) {
if (availableTracks[i].id)
n++;
}
return n;
}
bool cDevice::SetCurrentAudioTrack(eTrackType Type)
{
if (ttNone < Type && Type < ttDolbyLast) {
cMutexLock MutexLock(&mutexCurrentAudioTrack);
if (IS_DOLBY_TRACK(Type))
SetDigitalAudioDevice(true);
currentAudioTrack = Type;
if (player)
player->SetAudioTrack(currentAudioTrack, GetTrack(currentAudioTrack));
else
SetAudioTrackDevice(currentAudioTrack);
if (IS_AUDIO_TRACK(Type))
SetDigitalAudioDevice(false);
return true;
}
return false;
}
void cDevice::EnsureAudioTrack(bool Force)
{
if (Force || !availableTracks[currentAudioTrack].id) {
eTrackType PreferredTrack = ttAudioFirst;
int PreferredAudioChannel = 0;
int LanguagePreference = -1;
int StartCheck = Setup.CurrentDolby ? ttDolbyFirst : ttAudioFirst;
int EndCheck = ttDolbyLast;
for (int i = StartCheck; i <= EndCheck; i++) {
const tTrackId *TrackId = GetTrack(eTrackType(i));
int pos = 0;
if (TrackId && TrackId->id && I18nIsPreferredLanguage(Setup.AudioLanguages, TrackId->language, LanguagePreference, &pos)) {
PreferredTrack = eTrackType(i);
PreferredAudioChannel = pos;
}
if (Setup.CurrentDolby && i == ttDolbyLast) {
i = ttAudioFirst - 1;
EndCheck = ttAudioLast;
}
}
// Make sure we're set to an available audio track:
const tTrackId *Track = GetTrack(GetCurrentAudioTrack());
if (Force || !Track || !Track->id || PreferredTrack != GetCurrentAudioTrack()) {
if (!Force) // only log this for automatic changes
dsyslog("setting audio track to %d (%d)", PreferredTrack, PreferredAudioChannel);
SetCurrentAudioTrack(PreferredTrack);
SetAudioChannel(PreferredAudioChannel);
}
}
}
bool cDevice::CanReplay(void) const
{
return HasDecoder();
}
bool cDevice::SetPlayMode(ePlayMode PlayMode)
{
return false;
}
int64_t cDevice::GetSTC(void)
{
return -1;
}
void cDevice::TrickSpeed(int Speed)
{
}
void cDevice::Clear(void)
{
Audios.ClearAudio();
}
void cDevice::Play(void)
{
Audios.MuteAudio(mute);
}
void cDevice::Freeze(void)
{
Audios.MuteAudio(true);
}
void cDevice::Mute(void)
{
Audios.MuteAudio(true);
}
void cDevice::StillPicture(const uchar *Data, int Length)
{
}
bool cDevice::Replaying(void) const
{
return player != NULL;
}
bool cDevice::AttachPlayer(cPlayer *Player)
{
if (CanReplay()) {
if (player)
Detach(player);
if (!dynamic_cast<cTransfer *>(Player))
ClrAvailableTracks();
pesAssembler->Reset();
player = Player;
SetPlayMode(player->playMode);
player->device = this;
player->Activate(true);
return true;
}
return false;
}
void cDevice::Detach(cPlayer *Player)
{
if (Player && player == Player) {
player->Activate(false);
player->device = NULL;
player = NULL;
SetPlayMode(pmNone);
SetVideoDisplayFormat(eVideoDisplayFormat(Setup.VideoDisplayFormat));
Audios.ClearAudio();
}
}
void cDevice::StopReplay(void)
{
if (player) {
Detach(player);
if (IsPrimaryDevice())
cControl::Shutdown();
}
}
bool cDevice::Poll(cPoller &Poller, int TimeoutMs)
{
return false;
}
bool cDevice::Flush(int TimeoutMs)
{
return true;
}
int cDevice::PlayVideo(const uchar *Data, int Length)
{
return -1;
}
int cDevice::PlayAudio(const uchar *Data, int Length)
{
return -1;
}
int cDevice::PlayPesPacket(const uchar *Data, int Length, bool VideoOnly)
{
cMutexLock MutexLock(&mutexCurrentAudioTrack);
bool FirstLoop = true;
uchar c = Data[3];
const uchar *Start = Data;
const uchar *End = Start + Length;
while (Start < End) {
int d = End - Start;
int w = d;
switch (c) {
case 0xBE: // padding stream, needed for MPEG1
case 0xE0 ... 0xEF: // video
w = PlayVideo(Start, d);
break;
case 0xC0 ... 0xDF: // audio
SetAvailableTrack(ttAudio, c - 0xC0, c);
if (!VideoOnly && c == availableTracks[currentAudioTrack].id) {
w = PlayAudio(Start, d);
if (FirstLoop)
Audios.PlayAudio(Data, Length, c);
}
break;
case 0xBD: { // private stream 1
int PayloadOffset = Data[8] + 9;
uchar SubStreamId = Data[PayloadOffset];
uchar SubStreamType = SubStreamId & 0xF0;
uchar SubStreamIndex = SubStreamId & 0x1F;
// Compatibility mode for old VDR recordings, where 0xBD was only AC3:
pre_1_3_19_PrivateStreamDeteced:
if (pre_1_3_19_PrivateStream) {
SubStreamId = c;
SubStreamType = 0x80;
SubStreamIndex = 0;
}
switch (SubStreamType) {
case 0x20: // SPU
case 0x30: // SPU
break;
case 0x80: // AC3 & DTS
if (Setup.UseDolbyDigital) {
SetAvailableTrack(ttDolby, SubStreamIndex, SubStreamId);
if (!VideoOnly && SubStreamId == availableTracks[currentAudioTrack].id) {
w = PlayAudio(Start, d);
if (FirstLoop)
Audios.PlayAudio(Data, Length, SubStreamId);
}
}
break;
case 0xA0: // LPCM
SetAvailableTrack(ttAudio, SubStreamIndex, SubStreamId);
if (!VideoOnly && SubStreamId == availableTracks[currentAudioTrack].id) {
w = PlayAudio(Start, d);
if (FirstLoop)
Audios.PlayAudio(Data, Length, SubStreamId);
}
break;
default:
// Compatibility mode for old VDR recordings, where 0xBD was only AC3:
if (!pre_1_3_19_PrivateStream) {
dsyslog("switching to pre 1.3.19 Dolby Digital compatibility mode");
ClrAvailableTracks();
pre_1_3_19_PrivateStream = true;
goto pre_1_3_19_PrivateStreamDeteced;
}
}
}
break;
default:
;//esyslog("ERROR: unexpected packet id %02X", c);
}
if (w > 0)
Start += w;
else {
if (Start != Data)
esyslog("ERROR: incomplete PES packet write!");
return Start == Data ? w : Start - Data;
}
FirstLoop = false;
}
return Length;
}
int cDevice::PlayPes(const uchar *Data, int Length, bool VideoOnly)
{
if (!Data) {
pesAssembler->Reset();
return 0;
}
int Result = 0;
if (pesAssembler->Length()) {
// Make sure we have a complete PES header:
while (pesAssembler->Length() < 6 && Length > 0) {
pesAssembler->Put(*Data++);
Length--;
Result++;
}
if (pesAssembler->Length() < 6)
return Result; // Still no complete PES header - wait for more
int l = pesAssembler->ExpectedLength();
int Rest = min(l - pesAssembler->Length(), Length);
pesAssembler->Put(Data, Rest);
Data += Rest;
Length -= Rest;
Result += Rest;
if (pesAssembler->Length() < l)
return Result; // Still no complete PES packet - wait for more
// Now pesAssembler contains one complete PES packet.
int w = PlayPesPacket(pesAssembler->Data(), pesAssembler->Length(), VideoOnly);
if (w > 0)
pesAssembler->Reset();
return Result > 0 ? Result : w < 0 ? w : 0;
}
int i = 0;
while (i <= Length - 6) {
if (Data[i] == 0x00 && Data[i + 1] == 0x00 && Data[i + 2] == 0x01) {
int l = cPesAssembler::PacketSize(&Data[i]);
if (i + l > Length) {
// Store incomplete PES packet for later completion:
pesAssembler->Put(Data + i, Length - i);
return Length;
}
int w = PlayPesPacket(Data + i, l, VideoOnly);
if (w > 0)
i += l;
else
return i == 0 ? w : i;
}
else
i++;
}
if (i < Length)
pesAssembler->Put(Data + i, Length - i);
return Length;
}
int cDevice::Ca(void) const
{
int ca = 0;
for (int i = 0; i < MAXRECEIVERS; i++) {
if (receiver[i] && (ca = receiver[i]->ca) != 0)
break; // all receivers have the same ca
}
return ca;
}
int cDevice::Priority(void) const
{
int priority = IsPrimaryDevice() ? Setup.PrimaryLimit - 1 : DEFAULTPRIORITY;
for (int i = 0; i < MAXRECEIVERS; i++) {
if (receiver[i])
priority = max(receiver[i]->priority, priority);
}
return priority;
}
bool cDevice::Ready(void)
{
return true;
}
int cDevice::ProvidesCa(const cChannel *Channel) const
{
int Ca = Channel->Ca();
if (Ca == CardIndex() + 1)
return 1; // exactly _this_ card was requested
if (Ca && Ca <= CA_DVB_MAX)
return 0; // a specific card was requested, but not _this_ one
return !Ca; // by default every card can provide FTA
}
bool cDevice::Receiving(bool CheckAny) const
{
for (int i = 0; i < MAXRECEIVERS; i++) {
if (receiver[i] && (CheckAny || receiver[i]->priority >= 0)) // cReceiver with priority < 0 doesn't count
return true;
}
return false;
}
void cDevice::Action(void)
{
if (Running() && OpenDvr()) {
while (Running()) {
// Read data from the DVR device:
uchar *b = NULL;
if (GetTSPacket(b)) {
if (b) {
int Pid = (((uint16_t)b[1] & PID_MASK_HI) << 8) | b[2];
// Distribute the packet to all attached receivers:
Lock();
for (int i = 0; i < MAXRECEIVERS; i++) {
if (receiver[i] && receiver[i]->WantsPid(Pid))
receiver[i]->Receive(b, TS_SIZE);
}
Unlock();
}
}
else
break;
}
CloseDvr();
}
}
bool cDevice::OpenDvr(void)
{
return false;
}
void cDevice::CloseDvr(void)
{
}
bool cDevice::GetTSPacket(uchar *&Data)
{
return false;
}
bool cDevice::AttachReceiver(cReceiver *Receiver)
{
if (!Receiver)
return false;
if (Receiver->device == this)
return true;
// activate the following line if you need it - actually the driver should be fixed!
//#define WAIT_FOR_TUNER_LOCK
#ifdef WAIT_FOR_TUNER_LOCK
#define TUNER_LOCK_TIMEOUT 5000 // ms
if (!HasLock(TUNER_LOCK_TIMEOUT)) {
esyslog("ERROR: device %d has no lock, can't attach receiver!", CardIndex() + 1);
return false;
}
#endif
cMutexLock MutexLock(&mutexReceiver);
for (int i = 0; i < MAXRECEIVERS; i++) {
if (!receiver[i]) {
for (int n = 0; n < Receiver->numPids; n++) {
if (!AddPid(Receiver->pids[n])) {
for ( ; n-- > 0; )
DelPid(Receiver->pids[n]);
return false;
}
}
Receiver->Activate(true);
Lock();
Receiver->device = this;
receiver[i] = Receiver;
Unlock();
if (!Running())
Start();
if (ciHandler)
ciHandler->StartDecrypting();
return true;
}
}
esyslog("ERROR: no free receiver slot!");
return false;
}
void cDevice::Detach(cReceiver *Receiver)
{
if (!Receiver || Receiver->device != this)
return;
bool receiversLeft = false;
cMutexLock MutexLock(&mutexReceiver);
for (int i = 0; i < MAXRECEIVERS; i++) {
if (receiver[i] == Receiver) {
Receiver->Activate(false);
Lock();
receiver[i] = NULL;
Receiver->device = NULL;
Unlock();
for (int n = 0; n < Receiver->numPids; n++)
DelPid(Receiver->pids[n]);
}
else if (receiver[i])
receiversLeft = true;
}
if (ciHandler)
ciHandler->StartDecrypting();
if (!receiversLeft)
Cancel(3);
}
void cDevice::DetachAll(int Pid)
{
if (Pid) {
cMutexLock MutexLock(&mutexReceiver);
for (int i = 0; i < MAXRECEIVERS; i++) {
cReceiver *Receiver = receiver[i];
if (Receiver && Receiver->WantsPid(Pid))
Detach(Receiver);
}
}
}
void cDevice::DetachAllReceivers(void)
{
cMutexLock MutexLock(&mutexReceiver);
for (int i = 0; i < MAXRECEIVERS; i++) {
if (receiver[i])
Detach(receiver[i]);
}
}
// --- cTSBuffer -------------------------------------------------------------
cTSBuffer::cTSBuffer(int File, int Size, int CardIndex)
{
SetDescription("TS buffer on device %d", CardIndex);
f = File;
cardIndex = CardIndex;
delivered = false;
ringBuffer = new cRingBufferLinear(Size, TS_SIZE, true, "TS");
ringBuffer->SetTimeouts(100, 100);
Start();
}
cTSBuffer::~cTSBuffer()
{
Cancel(3);
delete ringBuffer;
}
void cTSBuffer::Action(void)
{
if (ringBuffer) {
bool firstRead = true;
cPoller Poller(f);
while (Running()) {
if (firstRead || Poller.Poll(100)) {
firstRead = false;
int r = ringBuffer->Read(f);
if (r < 0 && FATALERRNO) {
if (errno == EOVERFLOW)
esyslog("ERROR: driver buffer overflow on device %d", cardIndex);
else {
LOG_ERROR;
break;
}
}
}
}
}
}
uchar *cTSBuffer::Get(void)
{
int Count = 0;
if (delivered) {
ringBuffer->Del(TS_SIZE);
delivered = false;
}
uchar *p = ringBuffer->Get(Count);
if (p && Count >= TS_SIZE) {
if (*p != TS_SYNC_BYTE) {
for (int i = 1; i < Count; i++) {
if (p[i] == TS_SYNC_BYTE) {
Count = i;
break;
}
}
ringBuffer->Del(Count);
esyslog("ERROR: skipped %d bytes to sync on TS packet on device %d", Count, cardIndex);
return NULL;
}
delivered = true;
return p;
}
return NULL;
}