vdr/channels.h
Klaus Schmidinger da948a50d2 Version 1.3.38
- Fixed handling second audio and Dolby Digital PIDs for encrypted channels
  (was broken in version 1.3.37).
- Improved TS/PES conversion to better handle lost TS packets (thanks to
  Reinhard Nissl).
- Limited the frequency of log messages from the cRepackers.
- Now using the gettid() syscall to get a thread's pid, so that we get a
  useful value on NPTL systems (suggested by Johannes Stezenbach).
- Fixed the RCU remote control handling to avoid problems with NPTL (thanks
  to Andreas Share for reporting a lockup with the RCU on NPTL systems).
- When displaying the amount of free disk space, the space consumed by
  recordings that have been "deleted" but not yet actually "removed" is now
  taken into account (suggested by Christian Vogt).
- Now avoiding unnecessary disk access when checking if there are deleted
  recordings that need to be removed (reported by Carsten Koch).
- Fixed handling the DELETEDLIFETIME when removing deleted recordings. Now
  a deleted recording is retained at least DELETEDLIFETIME seconds before
  actually removing it.
  The value of DELETEDLIFETIME has been changed to 300. So after (possibly
  inadvertently) deleting a recording, there will be at least 5 minutes
  in which it can be recovered (unless a new recording immediately requires
  the disk space). The count starts again at 0 every time VDR is started.
- Fixed a possible crash when displaying the "Low disk space!" message from
  a background thread (thanks to Christof Steininger).
- Fixed handling OSD areas that have invalid sizes (thanks to Marco Schlüßler).
- Added a mutex to AssertFreeDiskSpace() to make sure calls from foreground
  and background threads won't interfere.
- The main menu now dynamically updates its contents in case an instant
  recording or replay stops, etc.
- The version number of EPG events is now also stored in the epg.data file
  (thanks to Kendy Kutzner).
- EPG events that are no longer in the currently broadcasted data stream are
  now automatically deleted.
- Removed an invalid access to Event->schedule in cSchedule::DelEvent().
- Modified cSchedule::Cleanup() (events are always sorted by time).
- Schedules are now cleaned up once every hour (not only at 05:00).
- The "Schedule" and "What's on now/next?" menus are now updated if a timer
  is set or modified.
- cTimer no longer has its own 'schedule' member, it rather uses that of the
  event it has been set to.
- The "Red" button in the "Schedule", "What's on now/next?" and "Event" menus
  now immediately creates a timer for the selected event and marks it with 'T'.
  If the event is already marked with 'T', the "Red" button opens the "Edit
  timer" menu for that timer.
- Removing deleted recordings is now done in a separate thread.
- Dropped the unused "stop recording on primary interface" stuff.
- Converting a grabbed image to JPEG is now done with the new function
  RgbToJpeg() (see tools.h).
- The SVDRP command GRAB now determines the image type (JPEG or PNM) from the
  extension (".jpg", ".jpeg" or ".pnm") of the given file name. The explicit
  'jpeg' or 'pnm' parameter is still accepted for backward compatibility, but
  has no meaning any more.
- The function cDevice::GrabImage() no longer writes the grabbed image to a
  file, but rather returns a pointer to the image in memory. The wrapper
  function cDevice::GrabImageFile() can be used to write the grabbed image
  directly to a file. Plugins that used the old version of cDevice::GrabImage()
  need to be adapted to the new interface.
- The new class cBase64Encoder (see tools.h) can be used to encode data in
  base64 (thanks to Bob Withers for publishing his Base64 class).
- The SVDRP command GRAB now writes the image data to the SVDRP connection
  (encoded in base64) if the given file name consists of only the file
  extension (".jpg", ".jpeg" or ".pnm"), or if only "-" is given as file
  name (based on a suggestion from Darren Salt).
  A simple way of viewing a grabbed image on a remote host is:

  svdrpsend.pl -d <hostname> 'grab -' | sed -n -e 's/^216-//p' -e '1ibegin-base64 644 -' -e '$a====' | uudecode | display -

- The new command line option '-g' must be given if the SVDRP command GRAB
  shall be allowed to write image files to disk. The parameter to this option
  must be the full path name of an existing directory, without any "..", double
  '/' or symlinks. By default, or if "-g- is given, grabbing to files is
  not allowed any more because of potential security risks.
- Modified the way the SVDRP command GRAB writes the grabbed image to a file
  to avoid a security hole (CAN-2005-0071, reported by Javier Fernández-Sanguino
  Peña):
  + The file handle is now opened in a way that it won't follow symbolic links
    (suggested by Darren Salt).
  + The given file name is now canonicalized, so that it won't contain any
    ".." or symlinks (suggested by Darren Salt).
  + Grabbing to files is limited to the directory given in the the command
    line option '-g'. By default grabbing to files is not allowed any more.
- Updated the Greek OSD texts (thanks to Dimitrios Dimitrakos).
- Changed all "illegal" to "invalid" in error messages (there's nothing "illegal"
  in VDR ;-).
- When started as user 'root' VDR now switches to a lesser privileged user id,
  keeping the capability to set the system time (based on a patch from Ludwig
  Nussel). By default the user id 'vdr' is used, which can be changed through
  the new command line option '-u'. Note that for security reasons VDR will no
  longer run as user 'root' (unless you explicitly start it with '-u root',
  but this is not recommended!). The 'runvdr' script has been changed to
  use the '-u' option.
- Changed the API of the functions cStatus::Recording() and cStatus::Replaying(),
  so that they can provide the full file name of the recording. Plugins that use
  these (or the related cStatus::Msg...() functions) need to be adapted
  (suggested by Andreas Brugger).
- The DVB devices now retune (and, if applicable, resend the DiSEqC data) if
  the lock is lost (based on a patch from Reinhard Nissl).
- Fixed handling multi byte key sequences in cKbdRemote (based on a patch from
  Jürgen Schneider).
- Removed unused variables in skinclassic.c and skinsttng.c (thanks to Marco
  Schlüßler).
- Made the static cControl functions thread safe (thanks to Patrick Fischer).
- Fixed initializing pthread_mutexattr_t and pthread_rwlockattr_t to avoid
  warnings with g++ 4.1.0 (thanks to Ville Skyttä).
- Fixed incrementing the 'state' variables in the repacker classes in remux.c
  to avoid warnings with g++ 4.1.0 (reported by Ville Skyttä).
- The Makefile now reports a summary of failed plugins (thanks to Udo Richter).
- The cTimer constructor can now take an optional cChannel (suggested by
  Patrick Fischer).
- Fixed setting the main thread id if VDR is running as a daemon.
- Fixed handling TS packets in cTS2PES (thanks to Reinhard Nissl).
- Added cTimer::SetPriority() to set a timer's priority (suggested by Kendy Kutzner).
- Added cMenuEditStrItem::InEditMode() (suggested by Christian Wieninger).
- Now using FE_READ_STATUS to read the current frontend status (suggested by
  Holger Wächtler).
- The "Menu" key now behaves consistently. If there is anything on the OSD, it
  is closed when the "Menu" key is pressed, and if there is nothing on the OSD,
  the "Menu" key opens the main menu (suggested by Luca Olivetti).
- The new option "Setup/OSD/Timeout requested channel info" can be used to turn
  off the automatic timeout of the channel display in case it was invoked by
  a press of the "Ok" key (suggested by Thiemo Gehrke).
- A message is now given when an instant recording is started (suggested by
  Helmut Auer). Actually the code was already there, just commented out - don't
  remember why it wasn't active...
- Removed an obsolete "Summary" text from i18n.c and preceded all key definition
  texts with "Key$" to avoid duplicates (reported by Lucian Muresan).
- Preceded all button texts with "Button$".
- Removed obsolete "Eject", "Language" and "scanning recordings..." texts.
- Added missing #include "thread.h" to dvbspu.c (reported by Gavin Hamill).
- Disabled the use of "fadvise" in cUnbufferedFile because there have been
  several reports that it causes more problems than it solves (suggested by
  Petri Hintukainen). If you want to use "fadvise", you can activate the line
  //#define USE_FADVISE
  in tools.c.
- Removed unused 'offset' member from cOsdItem.
- In the "Channels" menu the numeric keys now position the cursor to the channel
  with the given number (see MANUAL, section "Remote Control Keys", note (3) for
  details).
- The "Mark/Move" function in the "Channels" menu now also works in the non-numeric
  sort modes.
- The default cOsdObject::Show() now automatically calls cOsdMenu::Display() if
  this is a menu.
- The new "Info" key brings up information on the currently viewed programme
  or recording. For a live programme this is the same as "Schedule/Ok", i.e. the
  description of the current EPG event. For a recording this is the same as shown
  by the "Info" button in the "Recordings" menu. Plugins that implement players
  can overwrite their cControl::GetInfo() function to show their own info (see
  PLUGINS.html for details). Pressing the "Info" key again while the info is
  displayed will close the OSD. In order to assign this new key to an existing
  remote control setup, the remote.conf file needs to be deleted and VDR has
  to be restarted to go through the process of learning the remote control keys.
- Any cReceivers still attached to a cDevice when that device switches to a
  different transponder are now automatically detached (suggested by Patrick
  Fischer).
- The "flags" of a timer are now handled as an unsigned integer value. In order
  to do this, the interface of cMenuEditBitItem also had to be changed.
- In string entry fields (like, e.g., the file name of a recording) the characters
  can now be entered by pressing the numeric keys, the same way as on a
  telephone keypad (based on the "Easy Input" patch from Marcel Schaeben).
- Fixed the "Day" field of the "Edit timer" menu when pressing '0' to switch
  from "single shot" to "weekly", followed by the "Right" key (reported by
  Andreas Böttger).
- The file 'ca.conf' is obsolete and has been removed.
- Revised all descriptions regarding CICAM.
- Adapted c(Dvb)Device::ProvidesCa() to the dynamic CA handling.
- Added a mutex to synchronize cDevice::PlayPesPacket() and SetCurrentAudioTrack()
  (thanks to Reinhard Nissl).
- Added a SleepMs() in cRecorder::Action() to avoid a busy loop (thanks to Ingo
  Schneider).
- Cleaned up some trailing white space.
2006-01-08 18:00:00 +01:00

254 lines
9.8 KiB
C++

/*
* channels.h: Channel handling
*
* See the main source file 'vdr.c' for copyright information and
* how to reach the author.
*
* $Id: channels.h 1.37 2006/01/07 13:00:43 kls Exp $
*/
#ifndef __CHANNELS_H
#define __CHANNELS_H
#include "config.h"
#include "sources.h"
#include "thread.h"
#include "tools.h"
#define ISTRANSPONDER(f1, f2) (abs((f1) - (f2)) < 4) //XXX
#define CHANNELMOD_NONE 0x00
#define CHANNELMOD_ALL 0xFF
#define CHANNELMOD_NAME 0x01
#define CHANNELMOD_PIDS 0x02
#define CHANNELMOD_ID 0x04
#define CHANNELMOD_CA 0x10
#define CHANNELMOD_TRANSP 0x20
#define CHANNELMOD_LANGS 0x40
#define CHANNELMOD_RETUNE (CHANNELMOD_PIDS | CHANNELMOD_CA | CHANNELMOD_TRANSP)
#define CHANNELSMOD_NONE 0
#define CHANNELSMOD_AUTO 1
#define CHANNELSMOD_USER 2
#define MAXAPIDS 32 // audio
#define MAXDPIDS 16 // dolby (AC3 + DTS)
#define MAXSPIDS 8 // subtitles
#define MAXCAIDS 8 // conditional access
#define MAXLANGCODE1 4 // a 3 letter language code, zero terminated
#define MAXLANGCODE2 8 // up to two 3 letter language codes, separated by '+' and zero terminated
#define CA_FTA 0x0000
#define CA_DVB_MIN 0x0001
#define CA_DVB_MAX 0x000F
#define CA_USER_MIN 0x0010
#define CA_USER_MAX 0x00FF
#define CA_ENCRYPTED_MIN 0x0100
#define CA_ENCRYPTED_MAX 0xFFFF
struct tChannelParameterMap {
int userValue;
int driverValue;
};
//XXX into cChannel???
int MapToUser(int Value, const tChannelParameterMap *Map);
int MapToDriver(int Value, const tChannelParameterMap *Map);
int UserIndex(int Value, const tChannelParameterMap *Map);
int DriverIndex(int Value, const tChannelParameterMap *Map);
extern const tChannelParameterMap InversionValues[];
extern const tChannelParameterMap BandwidthValues[];
extern const tChannelParameterMap CoderateValues[];
extern const tChannelParameterMap ModulationValues[];
extern const tChannelParameterMap TransmissionValues[];
extern const tChannelParameterMap GuardValues[];
extern const tChannelParameterMap HierarchyValues[];
struct tChannelID {
private:
int source;
int nid;
int tid;
int sid;
int rid;
public:
tChannelID(void) { source = nid = tid = sid = rid = 0; }
tChannelID(int Source, int Nid, int Tid, int Sid, int Rid = 0) { source = Source; nid = Nid; tid = Tid; sid = Sid; rid = Rid; }
bool operator== (const tChannelID &arg) const { return source == arg.source && nid == arg.nid && tid == arg.tid && sid == arg.sid && rid == arg.rid; }
bool Valid(void) const { return (nid || tid) && sid; } // rid is optional and source may be 0//XXX source may not be 0???
tChannelID &ClrRid(void) { rid = 0; return *this; }
tChannelID &ClrPolarization(void);
int Source(void) { return source; }
int Nid(void) { return nid; }
int Tid(void) { return tid; }
int Sid(void) { return sid; }
int Rid(void) { return rid; }
static tChannelID FromString(const char *s);
cString ToString(void) const;
static const tChannelID InvalidID;
};
class cChannel;
class cLinkChannel : public cListObject {
private:
cChannel *channel;
public:
cLinkChannel(cChannel *Channel) { channel = Channel; }
cChannel *Channel(void) { return channel; }
};
class cLinkChannels : public cList<cLinkChannel> {
};
class cChannel : public cListObject {
friend class cMenuEditChannel;
private:
static cString ToText(const cChannel *Channel);
char *name;
char *shortName;
char *provider;
char *portalName;
int __BeginData__;
int frequency; // MHz
int source;
int srate;
int vpid;
int ppid;
int apids[MAXAPIDS + 1]; // list is zero-terminated
char alangs[MAXAPIDS][MAXLANGCODE2];
int dpids[MAXDPIDS + 1]; // list is zero-terminated
char dlangs[MAXDPIDS][MAXLANGCODE2];
int spids[MAXSPIDS + 1]; // list is zero-terminated
char slangs[MAXSPIDS][MAXLANGCODE2];
int tpid;
int caids[MAXCAIDS + 1]; // list is zero-terminated
int nid;
int tid;
int sid;
int rid;
int number; // Sequence number assigned on load
bool groupSep;
char polarization;
int inversion;
int bandwidth;
int coderateH;
int coderateL;
int modulation;
int transmission;
int guard;
int hierarchy;
int __EndData__;
int modification;
cLinkChannels *linkChannels;
cChannel *refChannel;
cString ParametersToString(void) const;
bool StringToParameters(const char *s);
public:
cChannel(void);
cChannel(const cChannel &Channel);
~cChannel();
cChannel& operator= (const cChannel &Channel);
cString ToText(void) const;
bool Parse(const char *s);
bool Save(FILE *f);
const char *Name(void) const { return name; }
const char *ShortName(bool OrName = false) const { return (OrName && isempty(shortName)) ? name : shortName; }
const char *Provider(void) const { return provider; }
const char *PortalName(void) const { return portalName; }
int Frequency(void) const { return frequency; } ///< Returns the actual frequency, as given in 'channels.conf'
int Transponder(void) const; ///< Returns the transponder frequency in MHz, plus the polarization in case of sat
static int Transponder(int Frequency, char Polarization); ///< builds the transponder from the given Frequency and Polarization
int Source(void) const { return source; }
int Srate(void) const { return srate; }
int Vpid(void) const { return vpid; }
int Ppid(void) const { return ppid; }
const int *Apids(void) const { return apids; }
const int *Dpids(void) const { return dpids; }
const int *Spids(void) const { return spids; }
int Apid(int i) const { return (0 <= i && i < MAXAPIDS) ? apids[i] : 0; }
int Dpid(int i) const { return (0 <= i && i < MAXDPIDS) ? dpids[i] : 0; }
int Spid(int i) const { return (0 <= i && i < MAXSPIDS) ? spids[i] : 0; }
const char *Alang(int i) const { return (0 <= i && i < MAXAPIDS) ? alangs[i] : ""; }
const char *Dlang(int i) const { return (0 <= i && i < MAXDPIDS) ? dlangs[i] : ""; }
const char *Slang(int i) const { return (0 <= i && i < MAXSPIDS) ? slangs[i] : ""; }
int Tpid(void) const { return tpid; }
int Ca(int Index = 0) const { return Index < MAXCAIDS ? caids[Index] : 0; }
int Nid(void) const { return nid; }
int Tid(void) const { return tid; }
int Sid(void) const { return sid; }
int Rid(void) const { return rid; }
int Number(void) const { return number; }
void SetNumber(int Number) { number = Number; }
bool GroupSep(void) const { return groupSep; }
char Polarization(void) const { return polarization; }
int Inversion(void) const { return inversion; }
int Bandwidth(void) const { return bandwidth; }
int CoderateH(void) const { return coderateH; }
int CoderateL(void) const { return coderateL; }
int Modulation(void) const { return modulation; }
int Transmission(void) const { return transmission; }
int Guard(void) const { return guard; }
int Hierarchy(void) const { return hierarchy; }
const cLinkChannels* LinkChannels(void) const { return linkChannels; }
const cChannel *RefChannel(void) const { return refChannel; }
bool IsCable(void) const { return cSource::IsCable(source); }
bool IsSat(void) const { return cSource::IsSat(source); }
bool IsTerr(void) const { return cSource::IsTerr(source); }
tChannelID GetChannelID(void) const { return tChannelID(source, nid, (nid || tid) ? tid : Transponder(), sid, rid); }
int Modification(int Mask = CHANNELMOD_ALL);
void CopyTransponderData(const cChannel *Channel);
bool SetSatTransponderData(int Source, int Frequency, char Polarization, int Srate, int CoderateH);
bool SetCableTransponderData(int Source, int Frequency, int Modulation, int Srate, int CoderateH);
bool SetTerrTransponderData(int Source, int Frequency, int Bandwidth, int Modulation, int Hierarchy, int CodeRateH, int CodeRateL, int Guard, int Transmission);
void SetId(int Nid, int Tid, int Sid, int Rid = 0);
void SetName(const char *Name, const char *ShortName, const char *Provider);
void SetPortalName(const char *PortalName);
void SetPids(int Vpid, int Ppid, int *Apids, char ALangs[][MAXLANGCODE2], int *Dpids, char DLangs[][MAXLANGCODE2], int Tpid);
void SetCaIds(const int *CaIds); // list must be zero-terminated
void SetCaDescriptors(int Level);
void SetLinkChannels(cLinkChannels *LinkChannels);
void SetRefChannel(cChannel *RefChannel);
};
class cChannels : public cRwLock, public cConfig<cChannel> {
private:
int maxNumber;
int modified;
int beingEdited;
cHash<cChannel> channelsHashSid;
void DeleteDuplicateChannels(void);
public:
cChannels(void);
bool Load(const char *FileName, bool AllowComments = false, bool MustExist = false);
void HashChannel(cChannel *Channel);
void UnhashChannel(cChannel *Channel);
int GetNextGroup(int Idx); // Get next channel group
int GetPrevGroup(int Idx); // Get previous channel group
int GetNextNormal(int Idx); // Get next normal channel (not group)
void ReNumber(void); // Recalculate 'number' based on channel type
cChannel *GetByNumber(int Number, int SkipGap = 0);
cChannel *GetByServiceID(int Source, int Transponder, unsigned short ServiceID);
cChannel *GetByChannelID(tChannelID ChannelID, bool TryWithoutRid = false, bool TryWithoutPolarization = false);
int BeingEdited(void) { return beingEdited; }
void IncBeingEdited(void) { beingEdited++; }
void DecBeingEdited(void) { beingEdited--; }
bool HasUniqueChannelID(cChannel *NewChannel, cChannel *OldChannel = NULL);
bool SwitchTo(int Number);
int MaxNumber(void) { return maxNumber; }
void SetModified(bool ByUser = false);
int Modified(void);
///< Returns 0 if no channels have been modified, 1 if an automatic
///< modification has been made, and 2 if the user has made a modification.
///< Calling this function resets the 'modified' flag to 0.
cChannel *NewChannel(const cChannel *Transponder, const char *Name, const char *ShortName, const char *Provider, int Nid, int Tid, int Sid, int Rid = 0);
};
extern cChannels Channels;
cString ChannelString(const cChannel *Channel, int Number);
#endif //__CHANNELS_H